Enclosures: Electronic related categories
 | ECO Compact Enclosures
The availability of 11 different sizes with lids of up to 4 different heights are the basic components of this series of enclosures. The PCI enclosure series comes with PG embossings, while the ECO enclosure series has plain sides.
Optionally, the ECO enclosures are available with an opaque or transparent lid. The wide range of accessories and the user-friendly design allow for this enclosure series to be utilized in almost any field of industry, whether as a component enclosure or as a control enclosure, as a terminal or a distributor box-ECO or PCI is your best choice.
TECHNICAL DATA : - Color : Light Gray similar to RAL 7035.
- Material : Fire-resistant thermoplastic polystyrene.
- Ingress Protection : IP 66, EN 60529, NEMA 4, 4X.
- Impact Resistance : > 7 Nm, EN 50014.
- Insulation : Fully insulated to VDE 0100.
- Flammability : UL 94 V2.
- Toxicity : Low-halogen.
- Gasket Temperature Range :
Polyurethane Foam Gasket : +14°F to + 158°F. - Temperature Resistance : +14°F up to +158°F.
- Weather Resistance : Do not expose to direct sunlight.
- Chemical Resistance : Not resistant to benzine, diesel, oils and fats as well as strong acids.
|
 | PCI Compact Enclosures
The availability of 11 different sizes with lids of up to 4 different heights are the basic components of this series of enclosures. The PCI enclosure series comes with PG embossings, while the ECO enclosure series has plain sides.
Optionally, the ECO enclosures are available with an opaque or transparent lid. The wide range of accessories and the user-friendly design allow for this enclosure series to be utilized in almost any field of industry, whether as a component enclosure or as a control enclosure, as a terminal or a distributor box-ECO or PCI is your best choice.
TECHNICAL DATA : - Color : Light Gray similar to RAL 7035.
- Material : Fire-resistant thermoplastic polystyrene.
- Ingress Protection : IP 66, EN 60529, NEMA 4, 4X.
- Impact Resistance : > 7 Nm, EN 50014.
- Insulation : Fully insulated to VDE 0100.
- Flammability : UL 94 V2.
- Toxicity : Low-halogen.
- Gasket Temperature Range :
Polyurethane Foam Gasket : +14°F to + 158°F. - Temperature Resistance : +14°F up to +158°F.
- Weather Resistance : Do not expose to direct sunlight.
- Chemical Resistance : Not resistant to benzine, diesel, oils and fats as well as strong acids.
|
 | ABS Watertight ET Enclosures
The ABS Watertight ET enclosure is ideal for packaging high quality electronic instrumentation. These housings feature a stylish beveled edge lid design, a smooth high-polish finish and molded edges. The aesthetic design of our ABS Watertight ET enclosure will enhance the marketability of your finished product. Plus, these enclosures have been designed to be completely recyclable and contain no pressed-in metal inserts.
The ABS Watertight ET consists of: an ABS base with plastic threads for lid screws, internal bosses in base for mounting terminals and printed circuit boards; an ABS lid with 4 captive, lid screws and internal bosses in the lid for mounting printed circuit boards; and a removable neoprene gasket. Optional Silicone or RFI gaskets, lid screw caps and external wall-mounting brackets and mounting plates are available. Rose+Bopla also offers a modified lid design with a raised border area for membrane key pads.
TECHNICAL DATA : - Color : Light Gray similar to RAL 7035 with a high-gloss finish.
- Material : ABS.
- Protection Classifications : NEMA Types : up to NEMA 12 IP 65, EN 60529
- Gasket Temperature Range :
Neoprene Gasket -40°F to +212°F
Silicone Gasket -76°F to +266°F
RFI Gasket -40°F to +392°F - Captive lid screws.
- Flammability : UL 94 HB/1.6.
- Surface resistance : > 1014 Ohm to DIN 53482.
- Disruptive Strength : 17 KV/mm to DIN 53481
|
 | ABS Watertight 09 Enclosures
Rose+Bopla′s ABS Watertight 09 enclosures are designed for a wide variety of electronic packaging applications. They are particularly suited for enclosing electrical and electronic components and housing complete small control systems. These enclosures have been used for solar panel control boxes, medical oxygen monitors and electronic lighting dimmer control housings.
The ABS Watertight 09 enclosure offers the lowest cost in our watertight enclosure line. ABS is an excellent alternative when reduced material characteristics are sufficient. The low cost makes these boxes ideal for large production runs.
Made from injection-molded ABS plastic (Acylonitrile- Butadine-Styrene), the enclosure includes a base and lid, captive stainless steel lid screws, molded-in lid screw inserts in the base, and a neoprene watertight gasket. Metric press-in brass inserts for internal mounting bosses are also available.
TECHNICAL DATA :- Color : Light Gray similar to RAL 7035 with a high-gloss finish
- Material : ABS.
- Protection Classifications : NEMA Types-up to Nema 4X IP 66, EN 60529
- Gasket Temperature Range :
Neoprene Gasket -40°F to +176°F
Silicone Gasket -76°F to +266°F
RFI Gasket -40°F to +392°F - Captive Stainless Steel Lid Screws
- Flammability : UL 94 HB
- Surface Resistance : 4 x 1014 Ohm/VDE 0303
- Disruptive Strength: 24 KV/mm/VDE 0303
- Toxicity : Halogen Free
- Option s: (Minimum order may apply)
Special colors
RFI Protection
|
 | Polycarbonate Watertight 33 Enclosure
Rose+Bopla′s Polycarbonate Watertight 33 enclosures with clear lids offer design engineers an excellent, cost-effective, instrumentation box. The lid is made of clear polycarbonate which makes it ideal for viewing meters or counters that must be protected from water and dust. Polycarbonate clear lid watertight enclosures are often used as data loggers, digital odometer instruments and process control monitors. Polycarbonate offers high impact resistance and excellent chemical resistance.
The Polycarbonate Watertight 33 includes a clear polycarbonate lid, a solid color polycarbonate base, captive stainless steel lid screws, molded-in lid screw inserts in the base, and a neoprene gasket. Metric press-in brass inserts for internal mounting bosses are also available.
TECHNICAL DATA :- Base Color : Light Gray similar to RAL 7035 Base with a high- gloss finish
- Material : Injection molded Polycarbonate. Base is solid color. Lid is clear Lexan.
- Protection Classifications : NEMA Types-up to NEMA 4X. IP 66, EN 60529
- Gasket Temperature Range :
Neoprene Gasket -40°F to +212°F
Silicone Gasket -76°F to +266°F
RFI Gasket -40°F to +392°F - Captive Lid Screws
- Surface Resistance : > 1015 Ohm/VDE 0303
- Disruptive Strength : > 30 KV/mm /VDE 0303
- Toxicity : Halogen Free
- Approvals : UL Listed File #E206630, UL 50, UL 508
CSA Approved
Flammability : UL 94 V2 - Options : (Minimum order may apply)
Special Colors
RFI Protection
Special Material : Special order for outdoor use.UL Listed File #;E206630, UL 50, UL 508
CSA Approved
Flammability : UL 94 V5A
|
 | Polycarbonate Watertight 03 Enclosure
Rose+Bopla′s Polycarbonate Watertight 03 enclosure offers exceptional design possibilities in high quality plastic at low prices. A broad range of sizes covers a wide array of widths and depths. Ideal where high impact resistance or chemical corrosion must be addressed at a reasonable cost. Wall mounting holes are molded into each corner. These holes are outside the internal chamber to maintain the enclosures watertight integrity. The lid must be removed to utilize the wall mounting feature. This is a basic shoe box design made of injection-molded polycarbonate.
Rose+Bopla′s Polycarbonate Watertight 03 enclosures are designed for use in the electro-mechanical and the electronics industry. They are good for small instruments and junction boxes. Typical applications are relay module enclosures, geophysical sensoring equipment and temperature control monitors.
The Polycarbonate 03 box comes with a solid color lid and base, captive stainless steel lid screws, molded-in lid screw inserts in the base and a neoprene gasket. Metric press-in brass inserts for internal mounting bosses are also available.
TECHNICAL DATA :- Color : Light Gray similar to RAL 7035, with a high-gloss finish.
- Material : Injection-molded Polycarbonate.
- Protection Classifications :
NEMA 4X,
IP66, EN60529 - Gasket Temperature Range :
Neoprene Gasket -40° F to +212° F:
Silicone Gasket -76° F to +266° F:
RFI Gasket -40° F to +392° F - Surface Resistance : > 1015Ohm/VDE 0303.
- Disruptive Strength : > 30 KV/mm/VDE 0303.
- Toxicity : Halogen Free.
- Approvals : UL Listed File #E206630, UL 50, UL 508
CSA Approved
Flammability :UL94V2 - Options : (Minimum order may apply)
Special Colors
RFI Protection
Special Material: Special order for outdoor use.UL Listed File #E206630, UL 50, UL 508
CSA Approved
Flammability : UL 94 V5A
|
 | Aluminum Watertight 01 Flange Enclosure - Unpainted Version
Unpainted Version : Rose+Bopla’s watertight diecast aluminum enclosure is available in an unpainted version. For the engineers who want to do machining in-house or wish for us to do machining or other secondary service operations, the unpainted version is the best option. The features are the same as the painted version.
Each aluminum enclosure consists of a die-cast base and lid, captive stainless steel lid screws, copper ground screws, and a standard Neoprene gasket. If an RFI or silicone gasket is required, it must be ordered separately at additional cost and will replace the standard neoprene gasket.
APPROVALS :- File #E206630,Listed UL 50,UL 508
- CSA Approved
- Det Norske Veritas File #8281 1/FERe
- Maritime Register of Shipping #830033.250
|
|
Tell your suppliers you found them on ThomasNet