High locking force of 1500 N (337 lb.) locks guard door shut until machine is safe to enter
IP67 (NEMA 6) enclosure enables the TL4024 to withstand water washdown
Door and lock monitoring-the TL4024 has a total of 4 contacts: 2 N/C safety + 1 contact for door position monitoring + 1 contact for lock monitoring
Unlocking is possible with a back load on the door to satisfy the demands of high cycle time applications
Narrow profile enables mounting to 2 in. square tubing or in applications with space restrictions
Rotatable head-the rotatable head of the TL4024 provides 8 actuator entry positions to satisfy most installation requirements
Optional key release-this option on power-to-unlock models allows manual unlocking of the guard door
Optional slide bolt with integral door handle aids installation on sliding and swinging guard doors
Two LED (red/green) status indicators on the lid may be wired to suit the application
Long life-the TL4024 is designed for a minimum of one million actuations with its variety of stainless steel actuators
Specifications are subject to change without notice.
Note: The safety contacts of the Omron STI switches are described as normally closed (N/C)-i.e., with the guard closed, actuator in place, and the machine able to be started.
Release Protective Cover Locks Using Controller Signals or Pushbutton Switches after the Cutting Tool Stops Moving Due to Inertia
A mechanical lock is applied automatically when the Operation Key is inserted. A high level of safety is achieved using a mechanism where the lock is only released when voltage is applied to the solenoid.
Conforms to EN (TÜV) standards corresponding to the CE marking.
Approved by UL, CSA, BIA, SUVA and CCC standards.
The Switch contact is opened by a direct opening mechanism (NC contacts only) when the protective cover is opened. Direct opening mechanism that is EN-approved is indicated by on the Switch.
Auxiliary release key ensures easy maintenance and unlocks the door in the case of a power failure.
Tough aluminum die-cast body incorporating a switch box with degree of protection satisfying IP67, UL, and CSA TYPE6P, 13.
Equipped with a horizontal and vertical conduit opening.
Models incorporating easy-to-see indicators for monitoring and those using an adjustable Operation Key for a double door are available.
The mounting direction of the head can be changed to allow the Operation Key to be inserted from four directions.
Tell your suppliers you found them on ThomasNet
