Monitors: Gas related categories
 | QRAE Plus Monitors Configuration
QRAE Plus Model PGM-2000 Series
1- to 4-Gas Personal Protection Monitor
The QRAE Plus is a full-featured, compact, one to four- sensor gas detector. The standard combustible gas sensor provides readings in the 0 - 100% LEL (lower explosion limit) range. The optional dual-mode combustible gas sensor provides 0 - 100% LEL readings as well as 1 - 100% by volume range when operated in the ′′TC′′ (thermal conductivity) mode. Other features include easy-to-change, externally accessible battery packs, internal vibrator alarm, and a more water-resistant case design. The rechargeable, Lithium-ion battery pack provides up to 18 hours of continuous operation (a spare alkaline battery pack is included with every monitor for emergency operation). The design includes datalogging storage capacity for download to PCcompatible computers with Windows™ 95, 98, 2000, NT, ME and XP. |
 | MultiRAE Plus Monitor Configuration
MultiRAE Plus Model PGM-50
The MultiRAE Plus combines a PID (Photo-ionization Detector) with the standard four gases of a confined space monitor (O2, LEL, and two interchangeable toxic gas sensors) in one compact monitor with sampling pump. Like the Leatherman™ tool, the MultiRAE Plus gets the job done in more circumstances than any other gas detector. Its versatility makes it the gas meter of choice for some of the highest profile HazMat/WMD teams in the United States. The MultiRAE Plus is quickly and easily changed from a sophisticated technician instrument to a simple text-only monitor. The same monitor can be used as a personal monitor, a hand-held sniffer or as a continuous-operation area monitor.
The MultiRAE Plus detector can be made wireless with the use of RAELink2. This allows real-time monitoring information from the detector to be integrated into an existing AreaRAE system. A wireless, RF (radio frequency) modem allows detectors equipped with Firmware version 1.20 or higher to communicate and transmit readings and other information on a real-time basis with a remotely located AreaRAE base controller up to two miles away.
These are the most commonly purchased MultiRAE Plus monitors, with a universal charger and an international plug kit. |
 | MultiRAE IR Monitors Configuration
MultiRAE IR Model PGM-54
1- to 5-Sensor NDIR CO2 and PID Personal Protection Gas Monitor
The MultiRAE IR combines a PID (Photoionization Detector) and Carbon Dioxide (CO2) sensor with O2, LEL, and one specific toxic gas sensor in one compact monitor with sampling pump. The MultiRAE IR′s versatility allows it to replace a wide range of monitors, saving training and maintenance costs. The MultiRAE IR is quickly and easily changed from a sophisticated technician instrument to a simple text or display only monitor. The same monitor can be used as a personal monitor, a hand-held sniffer or as a continuous, operational area monitor for use in applications such as indoor air quality and industrial hygiene.
Monitor only includes :- Monitor
- Shipping case
- Datalogging :
- Software, ProRAE Suite Package for Windows™ 95, 98, 2000, NT, ME & XP
- Computer Interface cable - Sensors (as specified)
- Calibration adapter
- Operation and maintenance manual
- Rubber boot with belt clip
- Rechargeable Lithium-ion battery pack
- Universal AC/DC Wall Adapter with international plug kit
- Alkaline battery adapter
- 3 external filters
- 3′′ Inlet probe
- External filter adapter
Monitor with Accessories Kit adds :
Accessories Kit adds :- Hard transport case with pre-cut foam
- 15′ (5 m) Teflon® tubing
- Tool kit
Optional Calibration Kit adds :- Four-gas mix in a 34L cylinder: CH4 50% LEL, 20.9% O2, 50 ppm CO, 5000 ppm CO2, balance N2
- N2 zero gas for non-PID equipped kits
- Isobutylene gas in a 34L cylinder (for units with PID) (doubles as CO2 zero gas)
- Calibration Regulator (male) and tubing
|
 | VRAE Monitors Configuraton
VRAE Model PGM-7800 Series
VRAE is a hand held one-to-five gas monitor with built-in sampling pump and optional data logging.
ensors include new RAE dual range 0-100% Volume and 0-100% LEL, oxygen, and three or four smart, interchangeable toxic sensors may be added. The dual range combustible sensor can monitor explosive gases in an oxygen-free environment at percent-by-volume levels.
The internal pump automatically shuts off and an alarm is activated if the remote probe tubing crimps or liquid is sucked onto the field-replaceable filter.
These are the most commonly purchased VRAE monitors, with a universal charger and an international plug kit. |
 | SentryRAE Steel Monitors Configuration
SentryRAE Steel Model PGM-SX-10 series
One-to-five Sensor, Easily Transportable Multi Gas Area Monitor with PID
The SentryRAE Steel is the first ′′lunchbox′′ -sized, portable, pumped monitor to combine a PID (Photoionization Detector) and standard four gas confined space monitor (O2, LEL, and two toxic gas sensors) in one product that can run over 24 hours on either rechargeable Lithium-ion or alkaline batteries.
The SentryRAE Steel detector is designed for use in circumstances where it is advantageous for the customer to leave the detector in a central location and provide monitoring information for a group of workers. The extra-bright, cluster LED alarm-light, large display, and very loud audible alarm convey readings and alarm state information over a substantially wider area than typical personal portable detectors.
These are the most commonly purchased SentryRAE Steel monitors. |
 | QRAE Plus Monitors
QRAE Plus Model PGM-2000 Series
1- to 4-Gas Personal Protection Monitor
The QRAE Plus is a full-featured, compact, one to four- sensor gas detector. The standard combustible gas sensor provides readings in the 0 - 100% LEL (lower explosion limit) range. The optional dual-mode combustible gas sensor provides 0 - 100% LEL readings as well as 1 - 100% by volume range when operated in the ′′TC′′ (thermal conductivity) mode. Other features include easy-to-change, externally accessible battery packs, internal vibrator alarm, and a more water-resistant case design. The rechargeable, Lithium-ion battery pack provides up to 18 hours of continuous operation (a spare alkaline battery pack is included with every monitor for emergency operation). The design includes datalogging storage capacity for download to PCcompatible computers with Windows™ 95, 98, 2000, NT, ME and XP. For other configurations, please contact us for pricing and part numbering or use our configurator by clicking the configurator button below.
|
| MultiRAE Plus Monitor
MultiRAE Plus Model PGM-50
The MultiRAE Plus combines a PID (Photo-ionization Detector) with the standard four gases of a confined space monitor (O2, LEL, and two interchangeable toxic gas sensors) in one compact monitor with sampling pump. Like the Leatherman™ tool, the MultiRAE Plus gets the job done in more circumstances than any other gas detector. Its versatility makes it the gas meter of choice for some of the highest profile HazMat/WMD teams in the United States. The MultiRAE Plus is quickly and easily changed from a sophisticated technician instrument to a simple text-only monitor. The same monitor can be used as a personal monitor, a hand-held sniffer or as a continuous-operation area monitor.
The MultiRAE Plus detector can be made wireless with the use of RAELink2. This allows real-time monitoring information from the detector to be integrated into an existing AreaRAE system. A wireless, RF (radio frequency) modem allows detectors equipped with Firmware version 1.20 or higher to communicate and transmit readings and other information on a real-time basis with a remotely located AreaRAE base controller up to two miles away.
These are the most commonly purchased MultiRAE Plus monitors, with a universal charger and an international plug kit. For other configurations, please contact us for pricing and part numbering or use our configurator by clicking the configurator button below.
|
| VRAE Monitors
VRAE Model PGM-7800 Series
VRAE is a hand held one-to-five gas monitor with built-in sampling pump and optional data logging.
ensors include new RAE dual range 0-100% Volume and 0-100% LEL, oxygen, and three or four smart, interchangeable toxic sensors may be added. The dual range combustible sensor can monitor explosive gases in an oxygen-free environment at percent-by-volume levels.
The internal pump automatically shuts off and an alarm is activated if the remote probe tubing crimps or liquid is sucked onto the field-replaceable filter.
These are the most commonly purchased VRAE monitors, with a universal charger and an international plug kit. For other configurations, please contact us for pricing and part numbering or use our configurator by clicking the configurator button below.
|
| SentryRAE Steel Monitors
SentryRAE Steel Model PGM-SX-10 series
One-to-five Sensor, Easily Transportable Multi Gas Area Monitor with PID
The SentryRAE Steel is the first ′′lunchbox′′ -sized, portable, pumped monitor to combine a PID (Photoionization Detector) and standard four gas confined space monitor (O2, LEL, and two toxic gas sensors) in one product that can run over 24 hours on either rechargeable Lithium-ion or alkaline batteries.
The SentryRAE Steel detector is designed for use in circumstances where it is advantageous for the customer to leave the detector in a central location and provide monitoring information for a group of workers. The extra-bright, cluster LED alarm-light, large display, and very loud audible alarm convey readings and alarm state information over a substantially wider area than typical personal portable detectors.
These are the most commonly purchased SentryRAE Steel monitors. For other configurations, please contact us for pricing and part numbering or use our configurator by clicking the configurator button below.
|
 | AreaRAE Steel Monitors Configuration
AreaRAE Steel Model PGM-5520
The AreaRAE Steel is an ATEX-certified multi-gas, wireless monitor. Housed in a welded stainless-steel enclosure, it is rugged, portable and weather-resistant, making it suitable for harsh environments. Ideal for hazardous materials and other emergency response monitoring applications, strategically placed AreaRAE Steel monitors can be used to quickly establish a perimeter, allowing first responders to back off to a safe position and monitor readings from up to 3 kilometers away.
The photoionization detector (PID) in the AreaRAE Steel can measure parts per million of volatile organic compounds (VOCs). In addition, it can be equipped with a lower explosive limit (LEL) sensor, an oxygen sensor, and one or two electrochemical toxic sensors for measuring specific substances such as hydrogen sulfide or chlorine.
An integrated wireless modem transmits real-time gas measurement data to a base station, which employs a standard Windows-based PC running ProRAE Remote software. The base station can simultaneously control and display readings for up to eight AreaRAE Steels and/or AreaRAE Steel Gammas (or other AreaRAE-compatible monitors, including MultiRAE Plus, MiniRAE 2000, ppbRAE Plus, Smiths APD-2000®, BAE ChemSentry®, and Coastal Environmental Systems Weatherpak®). This provides a multi-threat detection network that can monitor a wide geographic area. Employing mesh networking capabilities, the AreaRAE Steel is designed for extended-range performance in difficult radio environments. The AreaRAE Steel is available individually or as part of the Rapid Deployment Kit (RDK) system package.
|
|
Tell your suppliers you found them on ThomasNet
