Bullard Free Air® Pumps Reliable, Economical Air Sources for Airline Respirators Easy to operate and easy to maintain, Bullard Free-Air pumps offer a low cost way to supply clean breathable air to workers in contaminated environments. They are an economical air source when compressed air is not available and an inexpensive way to add breathing capacity when a compressed air source is at its maximum utilization.
Economical Bullard Free-Air pumps are efficient and economical. They are portable, can be moved quickly and easily from job site to job site, and they require no expensive plumbing or installation. Bullard Free-Air pumps are oil-less so they do not produce carbon monoxide, oil vapor or oil mist. Since you don’t need CO monitors, temperature alarms, airline filters, or complicated calibration equipment, Free-Air pumps are frequently a more cost effective alternative to compressed air.
Easy to Use Bullard Free-Air pumps are reliable and easy to use. They are available in both electric and air driven models. The electric models have low power requirements; simply plug-in, set your air pressure, and go to work. The air driven model is ideal for both general purpose and hazardous duty use. Used with optional extension hose kits, the breathable air inlet can be located up to 300 feet away from the pump.
Model Cap-1 Apollo Ambient Air Pumps The Apollo Ambient Air Pump, model CAP-1, is a cost-effective alternative to a breathing-air compressor. It provides an oil-free air supply for low-pressure, type CE, supplied-air respirators used for abrasive blasting or for any NIOSH approved continuous flow hood or helmet-style respirator approved to operate at 10 psi or less.
Purpose The Apollo Ambient Air Pump conveys breathing air from a clean environment outside the work area to a low-pressure type CE supplied-air respirator worn by an operator inside the blast environment or work zone. The oil-less pump moves the air from a clean-air environment to the respirator without introducing oil, carbon monoxide, or other contaminants.
Air flow output: 9 cfm at 10 psi
V4 hp thermally protected 110/115-volt motor
Oil-free air pump with Vs′′ NPT inlet and outlet
Adjustable pressure-relief valve
Pressure gauge
Inlet Filter: Multi-layer disposable cloth element with wire inner and outer support
Outlet Filter: activated charcoal
Note: For safe, efficient blasting, read & follow the owner′s manual and seek training for everyone who will use this equipment.
Tell your suppliers you found them on ThomasNet
