Tapes: Electrical related categories
 | Skived (PTFE Film) Tapes
Kapton®, Tedlar®, Rulon® and Teflon® are registered trademarks of E.I. DuPont De Nemours and Company used under license by Tapes & Technical Solutions.
|
 | Polyester Splicing & Printed Circuit Board Tape, MYP-25CA-72 yards
Clear or white. Acrylic adhesive 2.5 mil - Polyester film coated with a pre-cured solvent resistant electrical grade acrylic adhesive. Tape thickness: 2.5 mils. Backing thickness: 1.0 mil. Tensile strength: 25 lbs./in. Elongation: 100%. Adhesion: 35 oz/inch.. Dielectric strength: 4,500 volts. Electrolytic corrosion; factor; 1.0. Government specification: L.T. 100a. Mil Spec T-9906, Amend. 2. Excellent resistance to solvents, heat & chemicals. Used for component packaging & electrical insulation, edge reinforcement on books, webs, etc. Insulation class: 130°C. Temperature up to 310°F. 3 inch neutral core. |
| Polyester Splicing & Printed Circuit Board Tape, MYP-25CS-72 yards
Clear. Silicone adhesive. 2.5 mil - Clear polyester film stable electrically and mechanically at operating temperatures up to 385°F. Adhesive is cured to provide maximum resistance to chemicals and leaves no residue during masking or holding applications. Tape thickness: 2.5 mils. Backing thickness: 1.0 mil. Tensile strength: 20 lbs./in. Elongation: 100%. Adhesion: 20 oz/in. Dielectric strength: 5,000 volts. Electrolytic corrosion: factor: 1.10. insulation class: 130°C. Used to splice silicone papers. 3 inch plastic core. |
| Polyester Splicing & Printed Circuit Board Tape, MYP-25YR-72 yards
Yellow film thermosetting rubber adhesive 2.5 mil - yellow film coated with thermosetting rubber adhesive. 1.0 mil film. 1.5 mil adhesive thickness. Adhesion to steel: 45 oz/inch. Elongation: 100% at break. Operating temperature 0 to 325°F. Break strength: 25 lbs/inch. Dielectric strength: 5000 volts. Insulation class C. An economical method to hold, insulate and/or protect materials. Often used in critical capacitor and coil applications. Offers excellent quick stick properties and flag resistance, yet unwinds easily. Easy to apply electrical insulation. 3 inch plastic core. |
| Polyester Splicing & Printed Circuit Board Tape, MYP-3RS-72 yards
Color: Red silicone adhesive 3 mil total - High performance 1 mil polyester film coated with 2 mils of pre-cured silicone adhesive. Designed to be fully stable electrically and mechanically at operating temperatures up to 385°F. Adhesion to steel: 30 oz/inch.. Tensile strength: 30 Ibs./in. Elongation: 100%. Dielectric strength: 5000 volts. Electrolytic corrosion factor: 1.0. Insulation class 130°C. Used in splicing of silicone treated substrates. Tape has excellent holding power at elevated temperatures. Excellent resistance to abrasives, acids, oils, solvents, aging, staining, and water immersion. |
| Glass Cloth/Thermal Spray Masking Tapes, GC-SH7-36 yards
Glass cloth/Silicone adhesive. 7.0 mil - Electrical Grade Glass Cloth with Silicone Adhesive. Conformable; chemical and solvent resistant; printable. Designed for use in strategic masking of areas for thermal spray/plasma spray applications. Used for insulation of electrical apparatus, for sealing and bundling of non-electrical applications where flame redundancy or high heat resistance is required; coil armor wrap. Adhesion: 30 oz/inch. Tensile strength: 190 Ibs/in. Elongation: 6%. Insulation class: 180°C Class H. Temperature performance range: -100°F to SOOT. Formulated to meet MIL-I-19166C, Type 7. Color: Natural White. 3 inch plastic core. |
| Glass Cloth/Thermal Spray Masking Tapes, GC-SH10-36 yards
Glass cloth/Silicone adhesive. 10 mil - Electrical Grade Glass Cloth coated with 5 mils of Silicone Adhesive to provide maximum chemical, solvent and heat resistance. Used for soft cell insulation, phase insulation in integral HP motors, high temperature harness wrapping, flame retardant coil armor wrap, banding heavy conductor coils. An excellent all purpose tape capable of resisting moderate grit blasting. Adhesion: 55 oz/inch. Tensile strength: 175 Ibs/in. Elongation: 3%. Dielectric strength: 4500 V. Electrolytic Corrosion Factor: 1.0. Insulation class: - 200°C Class H. Temp. Performance range: -75°F to 500°F. Meets UL-510 flame retardancy test and MIL-I-19166C, Type 10 MIL. Color: Natural White. 3 inch core. |
| Glass Cloth/Thermal Spray Masking Tapes, GC-RB7-60 yards
Glass cloth/Thermosetting rubber adhesive. 7.0 mil - A high tensile woven Electrical Grade Glass Cloth coated with a high tack, high adhesion, Thermosetting Rubber Resin Adhesive system to provide maximum solvent resistance and limit adhesive softening. Its high tack and adhesion level resists flagging. For insulating connections, banding heavy conductor coils, harness and coil wrapping, barrier insulation, anchoring lead wires. Abrasion resistant to reduce damage to wires. Not recommended for use above 130°C Class B insulation. Adhesion: 50 oz/inch. Tensile strength: 150 Ibs/in. Elongation: 6%. Operating temperature range 0°F to 350°F. Meets UL Guide OANZ and file E51201 specifications. Meets MIL-l-15126; Type GFT. Color: Natural White. 3 inch core. |
| PTFE Coated Glass Fabric Tapes, TFE-3WL-36 yards
TFE-mil thickness (-3,-5,-6 or -10)... Specify with (WL) or without (SW) liner. Impregnated fibreglass cloth tape with silicone adhesive. Excellent, mechanical and chemical properties. Used as a primary insulation in a variety of electrical equipment and heat sealing bars, chute liner, gaskets, bearing surfaces, tabletop covers, guide rails and roll cover. Low friction surface; abrasion resistant. Product comes standard with liner. Self-Wound is optional at no additional cost (specify ′′no liner′′ by adding: ′′SW′′ to product number, e.g. TFE-6SW) .Teflon$#153 coated glass fabrics (without adhesive) are also available (specify by adding ′′NA′′ to product number, e.g. TFE-5NA). Roll size of ′′NA′′ 37 1/2 inch wide x 36 yd long (37 1/2inch wide x 18yd long available at half the price of the 36 yd roll listed). 1/2 inch and 3/4 inch wide Rolls must be self wound. 3 inch plastic core.
|
| PTFE Coated Glass Fabric Tapes, TFE-3WL-36 yards
TFE-mil thickness (-3,-5,-6 or -10)... Specify with (WL) or without (SW) liner. Impregnated fibreglass cloth tape with silicone adhesive. Excellent, mechanical and chemical properties. Used as a primary insulation in a variety of electrical equipment and heat sealing bars, chute liner, gaskets, bearing surfaces, tabletop covers, guide rails and roll cover. Low friction surface; abrasion resistant. Product comes standard with liner. Self-Wound is optional at no additional cost (specify ′′no liner′′ by adding: ′′SW′′ to product number, e.g. TFE-6SW) .Teflon$#153 coated glass fabrics (without adhesive) are also available (specify by adding ′′NA′′ to product number, e.g. TFE-5NA). Roll size of ′′NA′′ 37 1/2 inch wide x 36 yd long (37 1/2inch wide x 18yd long available at half the price of the 36 yd roll listed). 1/2 inch and 3/4 inch wide Rolls must be self wound. 3 inch plastic core.
|
| PTFE Coated Glass Fabric Tapes, TFE-3SW-36 yards
TFE-mil thickness (-3,-5,-6 or -10)... Specify with (WL) or without (SW) liner. Impregnated fibreglass cloth tape with silicone adhesive. Excellent, mechanical and chemical properties. Used as a primary insulation in a variety of electrical equipment and heat sealing bars, chute liner, gaskets, bearing surfaces, tabletop covers, guide rails and roll cover. Low friction surface; abrasion resistant. Product comes standard with liner. Self-Wound is optional at no additional cost (specify ′′no liner′′ by adding: ′′SW′′ to product number, e.g. TFE-6SW) .Teflon$#153 coated glass fabrics (without adhesive) are also available (specify by adding ′′NA′′ to product number, e.g. TFE-5NA). Roll size of ′′NA′′ 37 1/2 inch wide x 36 yd long (37 1/2inch wide x 18yd long available at half the price of the 36 yd roll listed). 1/2 inch and 3/4 inch wide Rolls must be self wound. 3 inch plastic core.
|
| PTFE Coated Glass Fabric Tapes, TFE-3SW-36 yards
TFE-mil thickness (-3,-5,-6 or -10)... Specify with (WL) or without (SW) liner. Impregnated fibreglass cloth tape with silicone adhesive. Excellent, mechanical and chemical properties. Used as a primary insulation in a variety of electrical equipment and heat sealing bars, chute liner, gaskets, bearing surfaces, tabletop covers, guide rails and roll cover. Low friction surface; abrasion resistant. Product comes standard with liner. Self-Wound is optional at no additional cost (specify ′′no liner′′ by adding: ′′SW′′ to product number, e.g. TFE-6SW) .Teflon$#153 coated glass fabrics (without adhesive) are also available (specify by adding ′′NA′′ to product number, e.g. TFE-5NA). Roll size of ′′NA′′ 37 1/2 inch wide x 36 yd long (37 1/2inch wide x 18yd long available at half the price of the 36 yd roll listed). 1/2 inch and 3/4 inch wide Rolls must be self wound. 3 inch plastic core.
|
| PTFE Coated Glass Fabric Tapes, TFE-5WL-36 yards
TFE-mil thickness (-3,-5,-6 or -10)... Specify with (WL) or without (SW) liner. Impregnated fibreglass cloth tape with silicone adhesive. Excellent, mechanical and chemical properties. Used as a primary insulation in a variety of electrical equipment and heat sealing bars, chute liner, gaskets, bearing surfaces, tabletop covers, guide rails and roll cover. Low friction surface; abrasion resistant. Product comes standard with liner. Self-Wound is optional at no additional cost (specify ′′no liner′′ by adding: ′′SW′′ to product number, e.g. TFE-6SW) .Teflon$#153 coated glass fabrics (without adhesive) are also available (specify by adding ′′NA′′ to product number, e.g. TFE-5NA). Roll size of ′′NA′′ 37 1/2 inch wide x 36 yd long (37 1/2inch wide x 18yd long available at half the price of the 36 yd roll listed). 1/2 inch and 3/4 inch wide Rolls must be self wound. 3 inch plastic core.
|
| PTFE Coated Glass Fabric Tapes, TFE-5WL-36 yards
TFE-mil thickness (-3,-5,-6 or -10)... Specify with (WL) or without (SW) liner. Impregnated fibreglass cloth tape with silicone adhesive. Excellent, mechanical and chemical properties. Used as a primary insulation in a variety of electrical equipment and heat sealing bars, chute liner, gaskets, bearing surfaces, tabletop covers, guide rails and roll cover. Low friction surface; abrasion resistant. Product comes standard with liner. Self-Wound is optional at no additional cost (specify ′′no liner′′ by adding: ′′SW′′ to product number, e.g. TFE-6SW) .Teflon$#153 coated glass fabrics (without adhesive) are also available (specify by adding ′′NA′′ to product number, e.g. TFE-5NA). Roll size of ′′NA′′ 37 1/2 inch wide x 36 yd long (37 1/2inch wide x 18yd long available at half the price of the 36 yd roll listed). 1/2 inch and 3/4 inch wide Rolls must be self wound. 3 inch plastic core.
|
| PTFE Coated Glass Fabric Tapes, TFE-5SW-36 yards
TFE-mil thickness (-3,-5,-6 or -10)... Specify with (WL) or without (SW) liner. Impregnated fibreglass cloth tape with silicone adhesive. Excellent, mechanical and chemical properties. Used as a primary insulation in a variety of electrical equipment and heat sealing bars, chute liner, gaskets, bearing surfaces, tabletop covers, guide rails and roll cover. Low friction surface; abrasion resistant. Product comes standard with liner. Self-Wound is optional at no additional cost (specify ′′no liner′′ by adding: ′′SW′′ to product number, e.g. TFE-6SW) .Teflon$#153 coated glass fabrics (without adhesive) are also available (specify by adding ′′NA′′ to product number, e.g. TFE-5NA). Roll size of ′′NA′′ 37 1/2 inch wide x 36 yd long (37 1/2inch wide x 18yd long available at half the price of the 36 yd roll listed). 1/2 inch and 3/4 inch wide Rolls must be self wound. 3 inch plastic core.
|
| PTFE Coated Glass Fabric Tapes, TFE-5SW-36 yards
TFE-mil thickness (-3,-5,-6 or -10)... Specify with (WL) or without (SW) liner. Impregnated fibreglass cloth tape with silicone adhesive. Excellent, mechanical and chemical properties. Used as a primary insulation in a variety of electrical equipment and heat sealing bars, chute liner, gaskets, bearing surfaces, tabletop covers, guide rails and roll cover. Low friction surface; abrasion resistant. Product comes standard with liner. Self-Wound is optional at no additional cost (specify ′′no liner′′ by adding: ′′SW′′ to product number, e.g. TFE-6SW) .Teflon$#153 coated glass fabrics (without adhesive) are also available (specify by adding ′′NA′′ to product number, e.g. TFE-5NA). Roll size of ′′NA′′ 37 1/2 inch wide x 36 yd long (37 1/2inch wide x 18yd long available at half the price of the 36 yd roll listed). 1/2 inch and 3/4 inch wide Rolls must be self wound. 3 inch plastic core.
|
| PTFE Coated Glass Fabric Tapes, TFE-6WL-36 yards
TFE-mil thickness (-3,-5,-6 or -10)... Specify with (WL) or without (SW) liner. Impregnated fibreglass cloth tape with silicone adhesive. Excellent, mechanical and chemical properties. Used as a primary insulation in a variety of electrical equipment and heat sealing bars, chute liner, gaskets, bearing surfaces, tabletop covers, guide rails and roll cover. Low friction surface; abrasion resistant. Product comes standard with liner. Self-Wound is optional at no additional cost (specify ′′no liner′′ by adding: ′′SW′′ to product number, e.g. TFE-6SW) .Teflon$#153 coated glass fabrics (without adhesive) are also available (specify by adding ′′NA′′ to product number, e.g. TFE-5NA). Roll size of ′′NA′′ 37 1/2 inch wide x 36 yd long (37 1/2inch wide x 18yd long available at half the price of the 36 yd roll listed). 1/2 inch and 3/4 inch wide Rolls must be self wound. 3 inch plastic core.
|
| PTFE Coated Glass Fabric Tapes, TFE-6WL-36 yards
TFE-mil thickness (-3,-5,-6 or -10)... Specify with (WL) or without (SW) liner. Impregnated fibreglass cloth tape with silicone adhesive. Excellent, mechanical and chemical properties. Used as a primary insulation in a variety of electrical equipment and heat sealing bars, chute liner, gaskets, bearing surfaces, tabletop covers, guide rails and roll cover. Low friction surface; abrasion resistant. Product comes standard with liner. Self-Wound is optional at no additional cost (specify ′′no liner′′ by adding: ′′SW′′ to product number, e.g. TFE-6SW) .Teflon$#153 coated glass fabrics (without adhesive) are also available (specify by adding ′′NA′′ to product number, e.g. TFE-5NA). Roll size of ′′NA′′ 37 1/2 inch wide x 36 yd long (37 1/2inch wide x 18yd long available at half the price of the 36 yd roll listed). 1/2 inch and 3/4 inch wide Rolls must be self wound. 3 inch plastic core.
|
| PTFE Coated Glass Fabric Tapes, TFE-6SW-36 yards
TFE-mil thickness (-3,-5,-6 or -10)... Specify with (WL) or without (SW) liner. Impregnated fibreglass cloth tape with silicone adhesive. Excellent, mechanical and chemical properties. Used as a primary insulation in a variety of electrical equipment and heat sealing bars, chute liner, gaskets, bearing surfaces, tabletop covers, guide rails and roll cover. Low friction surface; abrasion resistant. Product comes standard with liner. Self-Wound is optional at no additional cost (specify ′′no liner′′ by adding: ′′SW′′ to product number, e.g. TFE-6SW) .Teflon$#153 coated glass fabrics (without adhesive) are also available (specify by adding ′′NA′′ to product number, e.g. TFE-5NA). Roll size of ′′NA′′ 37 1/2 inch wide x 36 yd long (37 1/2inch wide x 18yd long available at half the price of the 36 yd roll listed). 1/2 inch and 3/4 inch wide Rolls must be self wound. 3 inch plastic core.
|
| PTFE Coated Glass Fabric Tapes, TFE-6SW-36 yards
TFE-mil thickness (-3,-5,-6 or -10)... Specify with (WL) or without (SW) liner. Impregnated fibreglass cloth tape with silicone adhesive. Excellent, mechanical and chemical properties. Used as a primary insulation in a variety of electrical equipment and heat sealing bars, chute liner, gaskets, bearing surfaces, tabletop covers, guide rails and roll cover. Low friction surface; abrasion resistant. Product comes standard with liner. Self-Wound is optional at no additional cost (specify ′′no liner′′ by adding: ′′SW′′ to product number, e.g. TFE-6SW) .Teflon$#153 coated glass fabrics (without adhesive) are also available (specify by adding ′′NA′′ to product number, e.g. TFE-5NA). Roll size of ′′NA′′ 37 1/2 inch wide x 36 yd long (37 1/2inch wide x 18yd long available at half the price of the 36 yd roll listed). 1/2 inch and 3/4 inch wide Rolls must be self wound. 3 inch plastic core.
|
| PTFE Coated Glass Fabric Tapes, TFE-10WL-36 yards
TFE-mil thickness (-3,-5,-6 or -10)... Specify with (WL) or without (SW) liner. Impregnated fibreglass cloth tape with silicone adhesive. Excellent, mechanical and chemical properties. Used as a primary insulation in a variety of electrical equipment and heat sealing bars, chute liner, gaskets, bearing surfaces, tabletop covers, guide rails and roll cover. Low friction surface; abrasion resistant. Product comes standard with liner. Self-Wound is optional at no additional cost (specify ′′no liner′′ by adding: ′′SW′′ to product number, e.g. TFE-6SW) .Teflon$#153 coated glass fabrics (without adhesive) are also available (specify by adding ′′NA′′ to product number, e.g. TFE-5NA). Roll size of ′′NA′′ 37 1/2 inch wide x 36 yd long (37 1/2inch wide x 18yd long available at half the price of the 36 yd roll listed). 1/2 inch and 3/4 inch wide Rolls must be self wound. 3 inch plastic core.
|
| PTFE Coated Glass Fabric Tapes, TFE-10WL-36 yards
TFE-mil thickness (-3,-5,-6 or -10)... Specify with (WL) or without (SW) liner. Impregnated fibreglass cloth tape with silicone adhesive. Excellent, mechanical and chemical properties. Used as a primary insulation in a variety of electrical equipment and heat sealing bars, chute liner, gaskets, bearing surfaces, tabletop covers, guide rails and roll cover. Low friction surface; abrasion resistant. Product comes standard with liner. Self-Wound is optional at no additional cost (specify ′′no liner′′ by adding: ′′SW′′ to product number, e.g. TFE-6SW) .Teflon$#153 coated glass fabrics (without adhesive) are also available (specify by adding ′′NA′′ to product number, e.g. TFE-5NA). Roll size of ′′NA′′ 37 1/2 inch wide x 36 yd long (37 1/2inch wide x 18yd long available at half the price of the 36 yd roll listed). 1/2 inch and 3/4 inch wide Rolls must be self wound. 3 inch plastic core.
|
| PTFE Coated Glass Fabric Tapes, TFE-10SW-36 yards
TFE-mil thickness (-3,-5,-6 or -10)... Specify with (WL) or without (SW) liner. Impregnated fibreglass cloth tape with silicone adhesive. Excellent, mechanical and chemical properties. Used as a primary insulation in a variety of electrical equipment and heat sealing bars, chute liner, gaskets, bearing surfaces, tabletop covers, guide rails and roll cover. Low friction surface; abrasion resistant. Product comes standard with liner. Self-Wound is optional at no additional cost (specify ′′no liner′′ by adding: ′′SW′′ to product number, e.g. TFE-6SW) .Teflon$#153 coated glass fabrics (without adhesive) are also available (specify by adding ′′NA′′ to product number, e.g. TFE-5NA). Roll size of ′′NA′′ 37 1/2 inch wide x 36 yd long (37 1/2inch wide x 18yd long available at half the price of the 36 yd roll listed). 1/2 inch and 3/4 inch wide Rolls must be self wound. 3 inch plastic core.
|
 | Copper Foil Tapes, CFL-5A-36 yards
1 oz rolled copper foil (1.4 mil.) Provides excellent solderability and conformity. Its aggressive acrylic adhesive system creates a superior bond. 60# release liner. Used for REI/EMI shielding applications in the electrical/electronics industry. Annealed and non/tarnishing. Flammability File #130121, UL 510, Section 4. Applications: EMI/RFI shielding of small electromagnetic components (i.e Transformer/reactor coils) and cable splices; repairing, modifying & prototype designing of wining boards, supplementary shielding of joints/seams; flat conductor assemblies. |
|
Tell your suppliers you found them on ThomasNet