Elbows related categories
 | JE Series - Male Elbow
For use with plastic, stainless steel, copper and other tubings. Leak-proof and corrosion-proof. Simple to install: just cut tubing end square, insert into fitting without disassembling and tighten ferrule nut for seal. No flaring required. Molded of White Polypropylene, Kynar (PVDF), Nylon and Acetal.
Operating Pressure: Standard Ferrule Nut - 50 psi, Plastic and Steel Gripper Nut - 220 psi
Note : When soft tubings such as Vinyl or Polyurethane are used, Tubing Inserts should be added. |
 | JFE Series - Female Elbow
For use with plastic, stainless steel, copper and other tubings. Leak-proof and corrosion-proof. Simple to install: just cut tubing end square, insert into fitting without disassembling and tighten ferrule nut for seal. No flaring required. Molded of White Polypropylene, Kynar (PVDF), Nylon and Acetal.
Operating Pressure: Standard Ferrule Nut - 50 psi, Plastic and Steel Gripper Nut - 220 psi
Note : When soft tubings such as Vinyl or Polyurethane are used, Tubing Inserts should be added. |
 | JUE Series - Union Elbow
For use with plastic, stainless steel, copper and other tubings. Leak-proof and corrosion-proof. Simple to install: just cut tubing end square, insert into fitting without disassembling and tighten ferrule nut for seal. No flaring required. Molded of White Polypropylene, Kynar (PVDF), Nylon and Acetal.
Operating Pressure: Standard Ferrule Nut - 50 psi, Plastic and Steel Gripper Nut - 220 psi
Note : When soft tubings such as Vinyl or Polyurethane are used, Tubing Inserts should be added. |
 | ME Series - Male Elbow
Thermoplastic tube fittings install without tools in seconds and provide a tight, dependable seal without clamps or adjustments. A unique stainless steel ′′grab ring′′ for tube retention, coupled with Buna-N O-Ring for positive seal, assures good tube connection with only hand-tight assembly. Vibration or tube movement will not break the seal and cause leakage. Available in highly inert polypropylene or strong, durable nylon. Fittings are approved by the National Sanitation Foundation, Standard 24, Approval 8047, for mobile home and recreational vehicle hot and cold water plumbing. |
 | FE Series - Female Elbow
Thermoplastic tube fittings install without tools in seconds and provide a tight, dependable seal without clamps or adjustments. A unique stainless steel ′′grab ring′′ for tube retention, coupled with Buna-N O-Ring for positive seal, assures good tube connection with only hand-tight assembly. Vibration or tube movement will not break the seal and cause leakage. Available in highly inert polypropylene or strong, durable nylon. Fittings are approved by the National Sanitation Foundation, Standard 24, Approval 8047, for mobile home and recreational vehicle hot and cold water plumbing. |
 | EU Series - Elbow Union
Thermoplastic tube fittings install without tools in seconds and provide a tight, dependable seal without clamps or adjustments. A unique stainless steel ′′grab ring′′ for tube retention, coupled with Buna-N O-Ring for positive seal, assures good tube connection with only hand-tight assembly. Vibration or tube movement will not break the seal and cause leakage. Available in highly inert polypropylene or strong, durable nylon. Fittings are approved by the National Sanitation Foundation, Standard 24, Approval 8047, for mobile home and recreational vehicle hot and cold water plumbing. |
 | ITEF Series - Male Elbow (Swivel)
Base Fitting are molded of tough corrosion resistant valox polyester. No thread sealants are needed. Full flow instant fittings. Quick-connect push/pull action ensures fast, easy replacement or servicing. |
 | ITEF Series - Female Elbow (Swivel)
Base Fitting are molded of tough corrosion resistant valox polyester. No thread sealants are needed. Full flow instant fittings. Quick-connect push/pull action ensures fast, easy replacement or servicing. |
 | CE45 Series - 45° Male Elbow Compression
Use with copper, brass and aluminum. Not recommended for steel tubing. Manufactured for low and medium pressure tubing connection work.Assembly Instructions - Slide nut, then sleeve into tubing. The thread end of the nut must face out
- Insert the tube into the fittings. Be sure the tube is bottomed on the fitting shoulder.
- Assemble nut to body, and tighten.
|
 | CE Series - Male Elbow Compression
Use with copper, brass and aluminum. Not recommended for steel tubing. Manufactured for low and medium pressure tubing connection work.Assembly Instructions - Slide nut, then sleeve into tubing. The thread end of the nut must face out
- Insert the tube into the fittings. Be sure the tube is bottomed on the fitting shoulder.
- Assemble nut to body, and tighten.
|
 | CFE Series - Female Elbow Compression
Use with copper, brass and aluminum. Not recommended for steel tubing. Manufactured for low and medium pressure tubing connection work.Assembly Instructions - Slide nut, then sleeve into tubing. The thread end of the nut must face out
- Insert the tube into the fittings. Be sure the tube is bottomed on the fitting shoulder.
- Assemble nut to body, and tighten.
|
 | QFEP Series - Tube X Female NPT Elbow
Functional one touch design facilitates an instant connection. Simple manual pressure on the elliptical sleeve results in an instant disconnection. Composite PBT body with Teflon coated threads. |
 | QCTPE Series - Union Elbow - Fractional
Functional one touch design facilitates an instant connection. Simple manual pressure on the elliptical sleeve results in an instant disconnection. Composite PBT body. |
 | QCUEPM Series - Tube X Male NPT Elbow
Functional one touch design facilitates an instant connection. Simple manual pressure on the elliptical sleeve results in an instant disconnection. Composite PBT body with Teflon coated threads. |
 | QCUEPML Series - Tube X Long Male NPT Elbow
Functional one touch design facilitates an instant connection. Simple manual pressure on the elliptical sleeve results in an instant disconnection. Composite PBT body with Teflon coated threads. |
 | QUEPM Series - Tube x Male NPT Swivel Elbow
Functional one touch design facilitates an instant connection. Simple manual pressure on the elliptical sleeve results in an instant disconnection. Composite PBT body with Teflon coated threads. |
 | EM Series - Elbow - UNF Thread x Barb
- 10-32 Male UNF Threads - Tapered and Straight
- 1/16” to 1/8” Hose Barbs
- Three Barb Styles
- White Nylon, Black Nylon, Polypropylene and Kynar
Note : Items marked with “*” may be subject to special order quantities.
|
 | CFLE Series - Luer Elbow
- Female x Female Luer and Female x Male Luer
- White Nylon, Natural Polypropylene, Clear Polycarbonate and Natural Kynar
- CMFMER Series can be adapted with CLFSR series to create a Rotating Luer Lock
|
 | P6525 Pro-Fit® Series - Extended Male NPT Swivel Elbow
Pro-Fit® thread design allows assembly with all female thread NPT forms. The new model is interchangeable with tapered thread fittings. The special sealing method has a locking effect similar to that of the taper model. Since the sealing ring is made of PTFE (Teflon®), it is not subject to wear and can be used repeatedly. Thread tape and thread sealants of other materials can be replaced, eliminating the need for full-length NPT thread, thus reducing the fitting size. Sealing is achieved on inclined, concave and convex surfaces. |
 | 6500 Series - Male NPT Fixed Elbow
NPT Push-In fittings are 100% Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | C6500 Series - Male NPT Fixed Elbow with Coated Threads
NPT Push-In fittings are 100% Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. The coating sealant on the thread is Loctite Vibra-Seal 516. |
 | S6520 Sprint® Series Male BSPP Swivel Elbow
Sprint® fittings are designed to allow assembly with all female thread forms, BSP, GAS, “G” and “R” types. The new model is interchangeable with tapered thread fittings, both BSPT and BSPP. The special sealing method has a locking effect similar to that of other tapered threads. The sealing ring is made of PTFE (Teflon®), is not subject to wear, and can be used repeatedly. Nylon, aluminum and washers of other materials can be replaced, eliminating the need for a “spot face” and thus reducing the fitting size. Sealing is achieved on inclined, concave and convex surfaces. Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools.
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6522 Micro Series - Male BSPP Metric Swivel Elbow
Micro fittings are constructed in 14 different models. T he sealing ring (O-ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools.
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6522 Series - Male BSPP & Metric Swivel Elbow
Spot-Face O-Ring fittings are available in 32 different modes. The sealing ring (O-ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools.
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6501 Series - M5 Male Metric Fixed Elbow
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly |
 | S6500 Sprint® Series - Male BSPT Fixed Elbow
Sprint® fittings are designed to allow assembly with all female thread forms, BSP, GAS, “G” and “R” types. The new model is interchangeable with tapered thread fittings, both BSPT and BSPP. The special sealing method has a locking effect similar to that of other tapered threads. The sealing ring is made of PTFE (Teflon®), is not subject to wear, and can be used repeatedly. Nylon, aluminum and washers of other materials can be replaced, eliminating the need for a “spot face” and thus reducing the fitting size. Sealing is achieved on inclined, concave and convex surfaces. Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools.
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6525 Sprint® Series - Extended Male BSPP Swivel Elbow
Sprint® fittings are designed to allow assembly with all female thread forms, BSP, GAS, “G” and “R” types. The new model is interchangeable with tapered thread fittings, both BSPT and BSPP. The special sealing method has a locking effect similar to that of other tapered threads. The sealing ring is made of PTFE (Teflon®), is not subject to wear, and can be used repeatedly. Nylon, aluminum and washers of other materials can be replaced, eliminating the need for a “spot face” and thus reducing the fitting size. Sealing is achieved on inclined, concave and convex surfaces. Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools.
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6550 Micro Series - Metric Union Elbow
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6550 Series - Metric Union Elbow
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6555 Series - Metric Stem Elbow
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
|
Tell your suppliers you found them on ThomasNet
