Fittings: Brass related categories
 | RRIS Series - Barbed Connector
Barbed Union Orifice, materials include Brass, Electroless Nickel plating or 303 Stainless Steel. Barb sizes are 1/16”, 3/32” and 1/8” ID. Orifice sizes range from 0.0039 to 0.063. Synthetic Sapphire Orifice sizes range from 0.0012 to 0.0252. |
 | 6442 Series - Male UNF Run Swivel Tee
UNF Push-In fittings are 100% Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6440 Series - Male NPT Run Swivel Tee
NPT Push-In fittings are 100% Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | C6440 Series - Male NPT Run Swivel Tee with Coated Threads
NPT Push-In fittings are 100% Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. The coating sealant on the thread is Loctite Vibra-Seal 516. |
 | 6451 Series - Male UNF ′′Y′′
UNF Push-In fittings are 100% Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6450 Series - Male NPT Swivel ′′Y′′
NPT Push-In fittings are 100% Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | C6450 Series - Male NPT Swivel ′′Y′′ with Coated Threads
NPT Push-In fittings are 100% Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. The coating sealant on the thread is Loctite Vibra-Seal 516. |
 | 6500 Series - Male NPT Fixed Elbow
NPT Push-In fittings are 100% Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | C6500 Series - Male NPT Fixed Elbow with Coated Threads
NPT Push-In fittings are 100% Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. The coating sealant on the thread is Loctite Vibra-Seal 516. |
 | 6463 Series - Female NPT Connector
NPT Push-In fittings are 100% Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6540 Series - Fractional Union Tee
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6560 Series - Fractional Union ′′Y′′
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6580 Series - Fractional Union Connector
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6590 Series - Fractional Union Bulkhead
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6810 Series - NPT Stem Adapter
NPT Push-In fittings are 100% Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | S6510 Sprint® Series - Male BSPP Connector
Sprint® fittings are designed to allow assembly with all female thread forms, BSP, GAS, “G” and “R” types. The new model is interchangeable with tapered thread fittings, both BSPT and BSPP. The special sealing method has a locking effect similar to that of other tapered threads. The sealing ring is made of PTFE (Teflon®), is not subject to wear, and can be used repeatedly. Nylon, aluminum and washers of other materials can be replaced, eliminating the need for a “spot face” and thus reducing the fitting size. Sealing is achieved on inclined, concave and convex surfaces. Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools.
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6512 Series - Male BSPP & Metric Connectors
Spot-Face O-Ring fittings are available in 32 different modes. The sealing ring (O-ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools.
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6512 Micro Series - Male BSPP & Metric Connectors
Micro fittings are constructed in 14 different models. T he sealing ring (O-ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools.
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | S6520 Sprint® Series Male BSPP Swivel Elbow
Sprint® fittings are designed to allow assembly with all female thread forms, BSP, GAS, “G” and “R” types. The new model is interchangeable with tapered thread fittings, both BSPT and BSPP. The special sealing method has a locking effect similar to that of other tapered threads. The sealing ring is made of PTFE (Teflon®), is not subject to wear, and can be used repeatedly. Nylon, aluminum and washers of other materials can be replaced, eliminating the need for a “spot face” and thus reducing the fitting size. Sealing is achieved on inclined, concave and convex surfaces. Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools.
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6522 Series - Male BSPP & Metric Swivel Elbow
Spot-Face O-Ring fittings are available in 32 different modes. The sealing ring (O-ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools.
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | S6430 Sprint® Series - Male BSPP Branch Swivel Tee
Sprint® fittings are designed to allow assembly with all female thread forms, BSP, GAS, “G” and “R” types. The new model is interchangeable with tapered thread fittings, both BSPT and BSPP. The special sealing method has a locking effect similar to that of other tapered threads. The sealing ring is made of PTFE (Teflon®), is not subject to wear, and can be used repeatedly. Nylon, aluminum and washers of other materials can be replaced, eliminating the need for a “spot face” and thus reducing the fitting size. Sealing is achieved on inclined, concave and convex surfaces. Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools.
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6432 Micro Series - Male Metric Branch Swivel Tee
Micro fittings are constructed in 14 different models. T he sealing ring (O-ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools.
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | S6440 Sprint® Series - Male BSPP Run Swivel Tee
Sprint® fittings are designed to allow assembly with all female thread forms, BSP, GAS, “G” and “R” types. The new model is interchangeable with tapered thread fittings, both BSPT and BSPP. The special sealing method has a locking effect similar to that of other tapered threads. The sealing ring is made of PTFE (Teflon®), is not subject to wear, and can be used repeatedly. Nylon, aluminum and washers of other materials can be replaced, eliminating the need for a “spot face” and thus reducing the fitting size. Sealing is achieved on inclined, concave and convex surfaces. Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools.
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6432 Series - Male BSPP & Metric Branch Swivel Tee
Spot-Face O-Ring fittings are available in 32 different modes. The sealing ring (O-ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools.
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6442 Micro Series - Male Metric Run Swivel Tee
Micro fittings are constructed in 14 different models. T he sealing ring (O-ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools.
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6442 Series - Male BSPP & Metric Run Swivel Tee
Spot-Face O-Ring fittings are available in 32 different modes. The sealing ring (O-ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools.
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6452 Micro Series - Metric Male Swivel ′′Y′′
Micro fittings are constructed in 14 different models. T he sealing ring (O-ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools.
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | S6450 Sprint® Series - Male BSPP Swivel ′′Y′′
Sprint® fittings are designed to allow assembly with all female thread forms, BSP, GAS, “G” and “R” types. The new model is interchangeable with tapered thread fittings, both BSPT and BSPP. The special sealing method has a locking effect similar to that of other tapered threads. The sealing ring is made of PTFE (Teflon®), is not subject to wear, and can be used repeatedly. Nylon, aluminum and washers of other materials can be replaced, eliminating the need for a “spot face” and thus reducing the fitting size. Sealing is achieved on inclined, concave and convex surfaces. Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools.
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6501 Series - M5 Male Metric Fixed Elbow
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly |
 | S6500 Sprint® Series - Male BSPT Fixed Elbow
Sprint® fittings are designed to allow assembly with all female thread forms, BSP, GAS, “G” and “R” types. The new model is interchangeable with tapered thread fittings, both BSPT and BSPP. The special sealing method has a locking effect similar to that of other tapered threads. The sealing ring is made of PTFE (Teflon®), is not subject to wear, and can be used repeatedly. Nylon, aluminum and washers of other materials can be replaced, eliminating the need for a “spot face” and thus reducing the fitting size. Sealing is achieved on inclined, concave and convex surfaces. Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools.
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6525 Sprint® Series - Extended Male BSPP Swivel Elbow
Sprint® fittings are designed to allow assembly with all female thread forms, BSP, GAS, “G” and “R” types. The new model is interchangeable with tapered thread fittings, both BSPT and BSPP. The special sealing method has a locking effect similar to that of other tapered threads. The sealing ring is made of PTFE (Teflon®), is not subject to wear, and can be used repeatedly. Nylon, aluminum and washers of other materials can be replaced, eliminating the need for a “spot face” and thus reducing the fitting size. Sealing is achieved on inclined, concave and convex surfaces. Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools.
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6590 Micro Series - Metric Union Bulkhead
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6590 Series - Metric Union Bulkhead
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6550 Micro Series - Metric Union Elbow
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6550 Series - Metric Union Elbow
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6540 Micro Series - Metric Union Tee
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly |
 | 6540 Series - Metric Union Tee
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly |
 | 6560 Micro Series - Metric Union ′′Y′′
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6560 Series - Metric Union ′′Y′′
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6811 Sprint® Series - Metric Stem Adapter
Sprint® fittings are designed to allow assembly with all female thread forms, BSP, GAS, “G” and “R” types. The new model is interchangeable with tapered thread fittings, both BSPT and BSPP. The special sealing method has a locking effect similar to that of other tapered threads. The sealing ring is made of PTFE (Teflon®), is not subject to wear, and can be used repeatedly. Nylon, aluminum and washers of other materials can be replaced, eliminating the need for a “spot face” and thus reducing the fitting size. Sealing is achieved on inclined, concave and convex surfaces. Connection and disconnection of the tube can be repeated several times and can be performed using one hand and without the use of tools.
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6850 Series - Metric Expander
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
 | 6555 Series - Metric Stem Elbow
Electroless nickel-plated brass. Full ID tube flow is always maintained for maximum Cv ratings and quick cycle times. “Push-in” and Lock the tube quickly and effortlessly. |
|
Tell your suppliers you found them on ThomasNet
