Fasteners related categories
 | Wrenchable Nuts
Precision-formed wrenchable nuts offer tremendous versatility for design and functional requirements. Wrenching styles include hexagon, double hexagon and twelve spline. |
 | Anchor Nuts
Anchor nuts are especially useful in blind locations, or where an attached nut facilitates maintenance. The nut mounting lugs may be riveted, welded or screwed to the structure. They assure positive positioning of the mating bolt and are self-wrenching.
|
 | K-Fast® Nuts
K-Fast® nuts are high strength, vibration-resistant, self-locking fasteners that offer fast, reliable and repetitive installations with K-Fast® tooling. Many lightweight designs are available, and features include self- sealing; self- aligning; and a counterbore that accommodates variations in structure thickness and oversize repair fasteners. The K-Fast® nuts can be spindled for use in automatic tools.
|
 | Rivetless Nut Plates
Compared to traditional riveted nut plates, these rivetless nut plates offer lower installed cost due to time, space and weight savings.
|
 | F1800 - Barrel Nut Floating
THREAD: AS8879
MATERIAL:
Nut and cradle - 8740 per AMS 6322 or 4340 per AMS 6415 alloy steel.
Roll Pin - 300 series corrosion resistant steel.
FINISH:Nut - Cadmium plate per AMS-QQ-P-416, Type II, Class 2 and Kaylube molybdenum disulfide dry lubricant per AS5272, Type I.Cradle - Cadmium plate per AMS-QQ-P-416, Type II, Class 2.Roll Pin - Passivate per AMS2700.
FLOATABILITY: .028 minimum on ′′X′′ axis; .016 maximum end to end.
APPLICATION: NASM25027, as applicable per NAS 577. F1800 is for use in applications requiring a high strength nut where access is restricted. |
 | K19301 - Washer
MATERIAL: Carbon or alloy steel, heat treat.
FINISH: Cadmium plate to AMS-QQ-P-416, Type II, Class 2.
NOTES: K19301 designed to fit with H1930. |
 | K7000 - Clinch Nut Flush Mounted
THREAD: AS8879
MATERIAL: Carbon steel, heat treated.
FINISH: Cadmium plate per AMS-QQ-P-416, Type II plating and Kaylube molybdenum disulfide dry lubricant after plating per AS5272, Type I.
APPLICATION: Blind application where a hex nut is inaccessible for wrenching or where limited clearance prevents installation of an anchor nut. After installation, clinch nuts become permanently fixed and remain in position during disassembly. Clinch nuts may be used in thin sheets of such materials such as aluminum alloy, copper, brass or mild steel.
-4 shank lengths will produce torque and push out values slightly below those required by NASM25027. |
 | KT7000 - Clinch Nut Installation Punch
APPLICATION: For use in the installation of Kaynar clinch nuts when used in hand pneumatic tools, arbor presses, squeezers, etc., or with hand setting tool holder Kaynar part number KT700. |
 | K7001 - Clinch Nut Flush Mounted
THREAD: AS8879
MATERIAL: A286 corrosion resistant steel.
FINISH: Kaylube molybdenum disulfide dry lubricant. Use part number K7031 for silver plate per AMS 241.
APPLICATION: Blind applications where a hex nut is inaccessible for wrenching or where limited clearance prevents installation of an anchor nut. After installation clinch nuts become permanently fixed and remain in position during disassembly. Clinch nuts may be used in thin sheets of such materials such as aluminum alloy, copper, brass or mild steel.
-4 shank lengths will produce torque and push out values slightly below those required by NASM25027. |
 | K7200 - Stake Nut
THREAD: AS8879
MATERIAL: Carbon or alloy steel, heat treat.
FINISH: Cadmium plate per AMS-QQ-P-416, Type II and Kaylube molybdenum disulfide dry lubricant per AS5272, Type I.
APPLICATION: Blind application where a fixed nut will aid assembly and maintenance. Use with AS8879 external threaded elements. This series is for use where space for anchor nuts is not available. The K7200 may be used with thin sheets of such materials as aluminum alloy, brass, copper and mild steel.
K7201 and K7231 are used in areas requiring non-magnetic materials or corrosion resistant steel.
NOTE: K7201 and K7231 are dimensionally identical except for material. |
 | KT7200 - Tool Holder Stake & Clinch Nut
MATERIAL: Alloy steel, heat treat.
FINISH: Black oxide.
APPLICATION: For use in the manual installation of clinch and stake nuts when used on Kaynar set tools KT7201 and KT700. |
 | F7200 - Stake Nut, Floating
THREAD: AS8879
MATERIAL: Nut and retainer - C1050 carbon steel per AMS5085 (UNS G10500), or alloy steel, heat treated.
FINISH: Nut and retainer - Cadmium plate per AMS-QQ-P-416, Type II, Class 2 and Kaylube molybdenum disulfide dry film lubricant coat per AS5212 ,Type I.
PERFORMANCE: NASM25027.
APPLICATIONS: For use with materials such as aluminium alloys, brass, copper and mild steels.
INSTALLATION DATA: Use Kaylock tool number KT7202 or KT7204. |
 | F7201 - Stake Nut, Floating, 500°F
THREAD: AS8879
MATERIAL: Nut and retainer - A286 corrosion resistant steel.
FINISH:
Nut - Kaylube molybdenum disulfide dry lubricant coated, per AS5217, Type I.
Retainer - Passivated AMS2700.
FLOATABILITY: .015 radially from center.
TEMPERATURE RANGE: to 500°F.
PROCUREMENT SPEC: NASM25027.
APPLICATION: For use with materials such as aluminium alloys, brass and copper.
INSTALLATION DATA: Use Kaylock tool number KT7202 or KT7204. |
 | MK7200 - Stake Nut, Miniature, 450°F
THREAD: AS8879
MATERIAL: Carbon or alloy steel, heat treated.
FINISH: Cadmium plate to fed. spec. AMS-QQ-P-416, Type I, Class 2, plus Kaylube molybdenum disulfide dry lubricant coated per AS5272 Type I.
PROCUREMENT SPEC: NASM25027.
TEMPERATURE: 450°F.
APPLICATION: For use with materials such as aluminium alloys, brass, copper and mild steel.
MK7200 is designed to be interchangeable with K7000 type clinch nuts.
INSTALLATION DATA: Use Kaylock tool number KT7201 or KT7203. |
 | F7231 - Stake Nut, Floating, 900°F
THREAD: AS8879
MATERIAL: Nut and basket - A286 corrosion resistant steel, heat treated.
FINISH:
Nut - Silver plated per AMS2410.
Basket - Passivated.
FLOATABILITY: .015 radially from center.
TEMPERATURE: to 900°F.
PROCUREMENT SPEC: NASM25027.
APPLICATION: For use with materials such as aluminium alloys, brass and copper.
INSTALLATION DATA: Use Kaylock tool number KT7202 or KT7204. |
 | MF7201 - Stake Nut, Floating, Self-Locking
THREAD: AS8879
MATERIAL: Nut and retainer - A286 corrosion resistant steel per AMS5525 and AMS5732 (UNS S66286), heat treated.
FINISH:
Nut - Passivated per AMS2700 and Kaylube molybdenum disulfide dry film lubricant coat per AS5272, Type I.
Retainer - Passivated per AMS2700.
PERFORMANCE: NASM25027.
APPLICATION: For use with materials such as aluminium alloys, brass and copper.
TEMPERATURE: 500°F
NOTES:
1. Installation data: use Kaylock tool number KT7202, or KT7204
2. FLOATABILITY: .015 min. radially from centered position.
3. Proper installation tool must fit over ′′W′′ dimension.
′′W′′ dimension may be elliptical shape within tolerance after assembly of nut into retainer. |
| K7231 - Stake Nut, 900°F
THREAD: AS8879
MATERIAL: A286 corrosion resistant steel, heat treated.
FINISH: Silver plated per AMS2410.
PROCUREMENT SPEC: NASM25027.
TEMPERATURE: 900°F.
APPLICATION: For use with materials such as aluminium alloys, brass and copper.
INSTALLATION DATA: Use Kaylock tool number KT7201 or KT7203. |
 | MF7231 - Stake Nut, Miniature, Floating, 900°F
THREAD: AS8879
MATERIAL: Nut and basket - A286 corrosion resistant steel, heat treated.
FINISH:
Nut - Silver plated per AMS241.
Basket - Passivated per AMS2700.
FLOATABILITY: .015 radially from center min.
PROCUREMENT SPEC: NASM25027.
TEMPERATURE: to 900°F.
APPLICATION: For use with materials such as aluminium alloys, brass and copper.
AVAILABILITY: Tooled.
INSTALLATION DATA: Use Kaylock tool number KT7202 or KT7204. |
 | MF7200 - Stake Nut, Miniature, Floating, 500°F
THREAD: AS8879
MATERIAL: Carbon or alloy steel, heat treated.
FINISH: Nut and retainer - Cadmium plated to fed. spec. AMS-QQ-P-416, Type I, Class 2, plus Kaylube molybdenum disulfide dry lubricant coated per AS5272, Type I.
FLOATABILITY: .015 radially from center min.
PROCUREMENT SPEC: NASM25027.
TEMPERATURE: 500°F
APPLICATION: For use with materials such as aluminium alloys, brass, copper and mild steel.
AVAILABILITY: Tooled.
INSTALATION DATA: Use Kaylock tool number KT7202 or KT7204. |
| K7201 - Stake Nut, 500°F
THREAD: AS8879
MATERIAL: A286 corrosion resistant steel, heat treated.
FINISH: Kaylube molybdenum disulfide dry lubricant coated per AS5272, Type I.
PROCUREMENT SPEC: NASM25027.
TEMPERATURE: 500°F.
APPLICATION: For use with materials such as aluminium alloys, brass and copper.
INSTALLATION DATA: Use Kaylock tool number KT7201 or KT7203. |
 | F53942 - Barrel Nut, Floating, Self-Locking, 180 KSI
THREAD: AS8879
MATERIAL:
Nut and cradle - INCO 718 per AMS 5662 or AMS 5663.
Roll Pin - 300 series corrosion resistant steel.
FINISH:
Roll Pin - Passivate per AMS2700.F53942-(*)
Nut - Cadmium plated per AMS-QQ-P-416, Type II, Class 2 and Kaylube molybdenum disulfide dry lubricant coated per AS5272, Type I.
Cradle - Cadmium plated per AMS-QQ-P-416, Type II, Class 2.
F53942-(*)X
Nut and cradle - Cadmium plated per AMS-QQ-P-416, Type II, Class 2.
F53942-(*)DL
Nut and cradle - Kaylube molybdenum disulfide dry lubricant per AS5272, Type I.F53942-(*)AK
Nut - Kaylube molybdenum disulfide dry lubricant per AS5272, Type I.
Cradle - Aluminium coat per NAS 4006.
F53942-(*)A
Nut and cradle - Aluminium coat per NAS 4006.F53942-(*)S
Nut - Silver plate per AMS 241.
Cradle - Passivate per AMS2700.
PERFORMANCE: NASM25027, as applicable per NAS 577.
FLOATIBILITY: .028 min. on ′′X′′ axis. Vertical --- .016 max.
INSPECTION: 100% fluorescent inspection per ASTM-E1417. No identification required. |
 | CNA 101 Nylstop Safety Bearing Nut - 120 °C - Cadmium Plate - Lubricated
MATERIAL: Alloy steel 35NCD16, heat treated for 28 - 44 HRC.
SURFACE TREATMENT: Cadmium 5 to 15 μm + dry film lubricant.
CLASSIFICATION: 120°C.
THREAD: PROFILE: ISO M in accordance with NFL 05-220.
TOLERANCES: In accordance with NFL 05-223.
TOLERANCES OF FORM AND POSITION : In accordance with ISO 8788.
MARKING: ø + Pas + SD.
QUALIFICATION AND ACCEPTANCE CONDITIONS: Simmonds Specification N° 170.
OPTION: To obtain a left-hand thread nut, please mention it clearly after the part number. Example: 25150CNA101 gauche.
Contact Alcoa for the diameter/type in manufacturing. |
 | CNA 101 Nylstop Safety Bearing Nut - 120 °C - Cadmium Plate-Lubricated
MATERIAL: Alloy steel 35NCD16, heat treated for 28 - 44 HRC.
SURFACE TREATMENT: Cadmium 5 to 15 μm + dry film lubricant.
TEMPERATURE CLASS: 120°C.
THREAD: ISO 5855-2.
TOLERANCES OF FORM AND POSITION: In accordance with ISO 8788.
MARKING: ø + Pas + SD.
QUALIFICATION AND ACCEPTANCE CONDITIONS: Simmonds Specification N° 170.
OPTION: To obtain a left-hand thread nut, please mention it clearly after the part number. Example: 25150CNA101 gauche.
Contact Alcoa for the diameter/type in manufacturing. |
 | ECR 101 Castellated Bearing Safety-Nut - Alloy Steel Silver Plate
MATERIAL: Alloy Steel 35NCD16 in accordance with TR 3823, heat treated for 28 - 34 HRC.
SURFACE TREATMENT: Silver plate 5 to 15μm in accordance with EN 2786.
TEMPERATURE CLASS: 260° C.
THREAD: MJ in accordance with ISO 5855-2.
MARKING: ø- MJ - SD in accordance with EN 2424 -Category N, on the area indicated on the drawing.
QUALIFICATION AND ACCEPTANCE CONDITIONS: AFS SIMMONDS Specification N° 153. To obtain a left-hand thread ring, please mention it clearly after the part number. Ex: 42150 ECR 101 left hand-thread.
Contact Alcoa for the diameter/type in manufacturing. |
 | ECR 105 Castellated Bearing Safety-Nut - Corrosion Resistant Steel Silver Plate
MATERIAL: Corrosion resistant steel Z6NCT25 in accordance with TR 3791, heat treated for 27 - 44 HRC.
SURFACE TREATMENT: Silver plate 5 to 15μm in accordance with EN 2786.
TEMPERATURE CLASS: 450° C.
THREAD: MJ in accordance with ISO 5855-2.
MARKING: ø- MJ - C - SD in accordance with EN 2424 -Category N, on the area indicated on the drawing.
QUALIFICATION AND ACCEPTANCE CONDITIONS: AFS SIMMONDS Specification N° 153. To obtain a left-hand thread ring, please mention it clearly after the part number. Ex: 42150 ECR 105 left hand-thread.
Contact Alcoa for the diameter/type in manufacturing. |
 | DA-DB-DC 5..M Nut- Clinch Flush Mounting , Miniature , 450°F
MATERIAL: Non magnetic, heat and corrosion resistant steel ( A286.) per AMS-5525, 5735 or 5737
FINISH : Dry film lubricant.
PERFORMANCE : Torque per NASM 25027.
THREADS: In accordance with AS-8879 before lubrication.
MARKING: Only ø - 3 and - 4 : SD + letter C on the area indicated on the drawing.
APPLICATION : Type DA, DB and DC parts are particularly suited for use in applications involving installations in thin Aluminum or soft steel sheets or plates having small mounting areas making the use of a miniature fixed type nut desireable. The adaptability of two shaft lengths to many sheet thicknesses is worth of note since it minimizes nut stocking requirements for numerous applications.
MOUNTING RECOMMENDATIONS
a) Respect carefully the installation hole diameter tolerance.
b) The nut and installation hole diameter axis must be perpendicular to the sheet surface.
Contact Alcoa for the diameter/type in manufacturing. |
 | DA-DB-DC 5 Nut- Clinch Flush Mounting , Miniature , 800°F
MATERIAL: Non magnetic, heat and corrosion resistant steel ( A286.) per AMS-5525, 5735 or 5737
FINISH : Silver Plate, AMS 2410.
PERFORMANCE : Torque per NASM 25027.
THREADS: In accordance with AS-8879 before lubrication.
MARKING: Only ø - 3 and - 4 : SD + letter C on the area indicated on the drawing.
APPLICATION : Type DA, DB and DC parts are particularly suited for use in applications involving installations in thin Aluminum or soft steel sheets or plates having small mounting areas making the use of a miniature fixed type nut desireable. The adaptability of two shaft lengths to many sheet thicknesses is worth of note since it minimizes nut stocking requirements for numerous applications.
MOUNTING RECOMMENDATIONS
a) Respect carefully the installation hole diameter tolerance.
b) The nut and installation hole diameter axis must be perpendicular to the sheet surface.
Contact Alcoa for the diameter/type in manufacturing. |
 | DA-DB-DC 35..M Nut- Clinch Flush Mounting , Miniature , 450°F
MATERIAL: Alloy steel, heat treated.
FINISH : Cadmium Plate plus Dry film lubricant, meets salt spray requirements of AMS-QQ-P-416, Type II, Class 2.
PERFORMANCE : Torque per NASM 25027.
THREADS: In accordance with AS-8879 before lubrication.
MARKING: Only ø - 3 and - 4 : SD on the area indicated on the drawing.
APPLICATION : Type DA, DB and DC parts are particularly suited for use in applications involving installations in thin Aluminum or soft steel sheets or plates having small mounting areas making the use of a miniature fixed type nut desireable. The adaptability of two shaft lengths to many sheet thicknesses is worth of note since it minimizes nut stocking requirements for numerous applications.
MOUNTING RECOMMENDATIONS
a) Respect carefully the installation hole diameter tolerance.
b) The nut and installation hole diameter axis must be perpendicular to the sheet surface.
Contact Alcoa for the diameter/type in manufacturing. |
 | DA-DB-DC 35 Nut- Clinch Flush Mounting , Miniature , 450°F
MATERIAL: Alloy steel, heat treated.
FINISH : Cadmium Plate, AMS-QQ-P-416, Type II, Class 2.
PERFORMANCE : Torque per NASM 25027.
THREADS: In accordance with AS-8879 before lubrication.
MARKING: Only ø - 3 and - 4 : SD on the area indicated on the drawing.
APPLICATION : Type DA, DB and DC parts are particularly suited for use in applications involving installations in thin Aluminum or soft steel sheets or plates having small mounting areas making the use of a miniature fixed type nut desireable. The adaptability of two shaft lengths to many sheet thicknesses is worth of note since it minimizes nut stocking requirements for numerous applications.
MOUNTING RECOMMENDATIONS
a) Respect carefully the installation hole diameter tolerance.
b) The nut and installation hole diameter axis must be perpendicular to the sheet surface.
Contact Alcoa for the diameter/type in manufacturing. |
 | NSF 88 Nut- Clinch, Floating, 210°F
MATERIAL: Alloy steel heat treated.
FINISH : Nut & Basket - Cadmium Plate, AMS-QQ-P-416, Type II, Class 2.
LOCKING INSERT: Gold Color Nylon - Heat Stabilized (Suitable for temperatures up to 210° F).
PERFORMANCE : Ø10/32 : NASM 25027 except : torque out 40 inch (1 complete single cycle after heating for 6 hours at 210°F).
THREADS: In accordance with AS 8879.
FLOATABILITY: Minimum radial .020 within limits of « B » dimension.
APPLICATION: Type NSF 88 Clinch Nuts are particularly suited for use in applications where limited mounting or wrenching areas make use of miniature fixed nut desirable since the spline on the nut shank must broach into the work. Installations are usually limited to use in thin Aluminum or soft Steel Sheets or plates, the floating nut component adds advantage to the use of NSF 88 since it relaxes the usual requirements for close bolt hole alignments in making assembly stack-ups.
Contact Alcoa for the diameter/type in manufacturing. |
|
Tell your suppliers you found them on ThomasNet
