Hoists: Chain related categories
 | Hurricane 360°
The CM Hurricane 360° hand chain hoist is an economical, high-quality, rugged unit with features unique to a hoist of this class. Designed with fewer parts to assure long life and minimal maintenance, this hoist can be used to lift loads in numerous industrial, construction and commercial applications.
Unique Brake Design - Single disc brake does not incorporate ratchet, pawls, or pawl springs as on other hand chain hoists. Fewer parts mean less wear and low maintenance.
Unique Handwheel Cover - Handwheel cover rotates 360° for hoist operation in any direction. Ideal for special rigging applications.
Steel Construction - Frame and housings are made from impact resistant, stamped steel for long life.
Powder Coated Finish - For corrosion protection.
Heat Treated Steel Gearing - All internal gears and pinions are heat treated steel for high strength and long life.
Bearings - High quality bushings and sealed ball bearings used throughout.
Chain Guide and Stripper - Assures load chain alignment.
Precision 4-Pocket Liftwheel - Fully machined for better chain fit and reduced wear.
Hardened Steel Chain - Assures high strength and long wear life.
High Strength Hooks and Latches - Forged upper and lower hooks with heavy duty cast steel latches.
Minimal Maintenance - Easily disassembled, requiring no special tools.
Meets ASME B30.16 - Overhead Hoist Standard and European CE Standard.
5-Year Warranty - Against defects in materials and workmanship.
Metric Rated
Designed and Manufactured by Columbus McKinnon Corporation |
 | Cyclone Hand Chain Hoist
One of the most popular and reliable hoists ever designed, the Cyclone combines superior engineering, efficiency and durability. Available in a variety of capacities from 1/4 ton to 10 tons, Cyclone features:
Most interchangeability of parts in the industry
Standard Load Limiter for simple, automatic overload protection
Enclosed contoured Weston-type automatic brake for positive load control
High-efficiency spur gearing for greater lift with minimum effort
Rugged Hoistaloy chain for added strength and durability
Fully machined, forged liftwheel pockets for easier lifting and smooth free chaining
High-strength aluminum alloy castings in frame and covers
Inspected over 75 times to meet or exceed HMI and ASME/ANSI performance and safety standards
Standard hand chain drop is 2 feet less than lift, (example 8 foot lift hoist has 6 foot hand chain drop)
Lifetime warranty
Metric rated
Made in U.S.A.
Options Include:
Fabric chain bags
Metal chain containers
Zinc-plated load and hand chain
Unwelded hand chain
Latchlok hooks
Bronze hooks
Bullard hooks
Eye-type suspension |
 | Cyclone Army Type Trolley Hoist
Same quality and performance as the Cyclone in a compact, low headroom integral trolley mount. Ideal for applications requiring a moveable hoist including:
Rugged steel loadbars connected directly to hoist frame
Reduced headroom, side clearances and end approach for easy maneuvering of heavy loads in tight places
Standard Load Limiter automatic overload protection
Plain and geared trolley mounts in capacities from 1 /4 to 12 tons
Universal tread trolley wheels for operation on sloped or flat flanged beams
Standard hand chain drop 2 feet less than lift (example: 8 foot lift hoist has 6 foot hand chain drop)
Chain containers, zinc-plated load and hand chain, aluminum unwelded hand chain, Latchlok hooks, bronze hooks, bullard hooks, larger beam trolleys, trolley guards, and units without Load Limiter optional, depending on capacity
Lifetime warranty
Metric rated
Made in U.S.A. |
 | Series 622 Hand Chain Hoist
Simple, efficient, economical design
Equipped with hardened load chain for flexibility
and long wear
Compact design, low headroom and lightweight steel
construction for easy installation, even in confined spaces
Weston-type load brake requires no lubrication
Hand wheel cover with guide slots minimizes jamming
and slipping
Forged swivel hooks with latches reduce twisting
of chain and unintentional unhooking of load
when chain is slack
Standard hand chain drop is 2 feet less than lift
(example: 8 foot lift hoist has 6 foot hand chain drop)
One-year warranty
Metric rated
Imported |
 | Series 602 Mini Ratchet Lever Hoist
This Mini-but-Mighty Hoist Lifts Up To 550 Lbs. Easy Toolbox Storage The CM Series 602 mini hoist is the most compact ratchet lever hoist inthe market.Plated load chain is standard. Weston type load brake. Rubber grip for bettercomfort and security. Lightweight design weighs only 5 lbs. for ease of operation and portability. Use in confined conditions with one hand operation. Forged upper and lower hooks with latches standard. Impact resistant all-steel frame, gear case and cover Hardened link type steel load chain for strength and long wear. Free chaining feature serves to quickly attach the load. Conforms with ASME B30.21. Standard five-ft. lift. Units with ten-ft. lift available - Product Code # 0214 The CM Series 602 mini hoist is the most compact ratchet lever hoist in the market. |
 | Series 653 Lever Operated Hoist
Ideal for construction
and industrial applications
The Series 653 lever operated hoist is a high quality, rugged,
steel tool for close quarter pulling, stretching, and hoisting applications.
Its characteristic short handle, along with minimal lever pull effort,
make this tool ideal for a broad range of applications.
Capacities from 3/4 to 3 tons
Impact resistant, stamped steel frame, gear case and
cover for durability and light weight.
Powder coated finish for added corrosion protection.
Hardened steel load sharing gears.
Double pawl arrangement for assured load control.
Two chain guide rollers for positive chain engagement.
Weston type braking system for positive load control and positioning.
Simple one-handed, free chaining for fast load attachment.
Hardened steel chain for strength and long wear life.
Forged upper and lower hooks with heavy cast steel latches.
Rubber handle grip for added operator comfort.
Minimal maintenance with no special tools required.
5-year warranty against defects in materials and workmanship.
Metric rated.
Meets ASME B30.21 – Manually Lever Operated Hoist Standard
and European CE Standard.
Designed and manufactured by Columbus McKinnon Corporation. |
 | 640 CM Puller Lever Operated Chain Hoist
The CM Puller is designed for heavy-duty construction
and industrial applications. Used to pull, lift, drag or
stretch, it features:
Tough aluminum alloy
construction and
powder coat finish
Weatherproof for outdoor service
Simple construction with fewer
parts for ease of maintenance
and lower inventories
Hoistaloy hardened steel link
type load chain for strength, long
wear life and flexibility
Weatherized Weston-type
automatic braking system for
positive load control
Easy, one-hand operation and
control — only 58 pounds of pull
required for 3/4 ton model
capacity
Forged upper and lower hooks
with latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of
lever forces protecting against
dangerous overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (3/4 & 11/2 ton
units only)
Optional Load Sentry warns of
overload condition
Optional shorter lever for 3/4 and
11/2 ton units available
Optional zinc-plated chain
available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A. |
 | Short Handle Puller
Easy one-hand operation
Lever pull range is 45 to 62
pounds to lift full load
Handle that rotates 360°, making
it easy to operate in any position
and in small spaces
Tough yet lightweight aluminum
construction and powder coat
finish
Hoistaloy hardened steel load
chain for strength,
long wear life and flexibility
Free chaining for fast, easy
attachment to load
Forged upper and lower hooks
with latches
Simple construction with fewer
parts for ease of maintenance
Optional Load Limiter device
protects against overload
Lifetime warranty
Made in U.S.A. |
 | Rigger Lever Operated Hoist
Designed for moderate commercial
applications, this lightweight, compact tool
stores easily and features:
Flexible, non-binding CM load chain
Forged upper and lower hooks with
latches standard
Free-wheeling chain for fast attachment
Clover leaf chain guides and stripper
seat chain in liftwheel reduce chance
of jamming
Unlimited lift by ordering
any length chain
Ratchet, driving pawl and
holding pawl for load control
One lever used to change from
lifting to lowering and back to lifting
Easy maintenance
One-year warranty
Metric rated
Made in U.S.A. |
 | Lodestar Electric Chain Hoist
The balanced, integrated, proven design of the Lodestar has
made it the most popular electric chain hoist in the industry.
Lodestar gives you more value for your money including:
Up to 3 ton capacities for heavyduty
industrial applications
Gear train lifetime lubricated with
non-oxidizing grease
Precision machined and hardened
liftwheel with hardened chain
guides for precise chain liftwheel fit
Gearing designed for exceptionally
long life and quiet operation
H4 duty standard
Rugged control station (NEMA 4)
Hoist duty motor, standard
Protector overload device and
standard screw type limit switches
Designed for greater productivity,
efficiency and economy
Hardened, forged steel, latch type
hooks and Hoistaloy load chain for
long, dependable service
Easy to install and maintain
No special tools required
to disassemble
High reliability and long life
Lifetime warranty
Each hoist thoroughly inspected
and tested to over 125%
of rated load prior to shipment
Meets ASME B30.16
Metric rated
Made in U.S.A.
Special applications
Harsh environment hoists available for severe duty of plating,
galvanizing and washdown applications
Hoists with climbing capability available for temporary rigging or lifting
applications — must be used in inverted position only
Hoists with creep control allow precise positioning through
field adjustment within the time delay range of .05 sec. to 3 sec.
Articulating suspension 3 ton only |
 | ShopStar Electric Chain Hoist
The ShopStar electric chain hoist features rugged construction and
high H4 duty cycle. It keeps lifting and lifting, up to 1,000 pounds and
300 motor starts per hour. Additional features and benefits include:
H4 duty cycle (300 motor starts/hour)
Easy installation and maintenance
Standard protector overload device
10 pocket oblique lay
liftwheel provides longer chain wear
Epoxy powder coat finish
61/2 ft. power cord with molded 3 prong
plug on 115 volt units
NEMA 4 industrial rated control station
Optional impact-resistant chain container
available
Gear train lifetime lubricated with
non-oxidizing grease
CM Hoist Alloy Load Chain (zinc plated
optional)
Thermally protected hoist duty motor
Dual braking system — D.C. plus
regenerative
Rugged cast aluminum alloy hoist frame
5:1 design factor
Small, compact design for commercial &
industrial applications
Rigid hook suspension prevents
tangling of power cord
Hardened forged steel latch style lower
hook rotates 360°
Totally enclosed non-ventilated hoist
frame protects motor from environmental
contamination
True vertical lift
Precision bearings used throughout hoist
Lifetime warranty
Made in U. S . A. |
 | Powerstar Electric Chain Hoist
Designed specifically as an
alternative to wire rope
hoists for high speed lifting
of loads from 2 to 20 tons in
a space saving chain hoist.
H-4 or better rated duty cycle
Designed for heavy-duty
industrial applications from
2 to 20 ton capacities
Liftwheel has machined chain
pockets and is heat treated
alloy steel for maximum
strength and wear resistance
Efficient regenerative braking
system avoids heat generation
in power train
Motors up to 7 1/2 h.p. provide
a wide range of lifting speeds
Single or two speed controls.
Two speed models operate on
3:1 speed ratio
Standard adjustable upper and
lower screw limit switches
Standard overload Protector device
Hoistaloy load chain can be easily
inspected for wear and abuse
True vertical lift
Factory tested to 125% of rated
capacity prior to shipment
Metric rated except for 10 & 20 ton
capacities
Rugged aluminum alloy hoist frame
Chain guide surrounds liftwheel
Machined and hardened steel
Helical gears used throughout
hoist for optimum performance
and mechanical efficiency.
Extensive use of life-lubricated bearings
plus sealed oil bath power train reservoir
for minimum maintenance.
Dual braking system
Heavy duty, industrial single speed
controls include magnetic reversing
contactor which operates on 115 volts
provided by a control transformer.
Totally enclosed, ball bearing, 30 minute
rated, thermally protected, hoist duty
motor is standard.
Push button control is weatherproof
(NEMA 4 rated).
Drop of push button control is 4 ft. above
hook at lowest position, unless otherwise
specified.
External push button chain strain relief
is standard.
Power cord length is 2 1/2 ft. unless
otherwise specified.
Trolley design permits easy adjustment
for installation on a broad range of beam
flange widths.
Trolley wheels have double row, tapered
roller bearings plus machined and hardened
universal treads to permit operation on
American Standard or flat flanged sections
interchangeably.
Spur gearing used in all motorized trolleys
for improved efficiency and durability.
Drop of hand chain on geared trolleys is 2 ft.
above hook at lowest position, unless
otherwise specified.
Designed to be maintained “on the beam.”
Up to 600 lineal feet of chain
Weatherproof (NEMA3R)
Lifetime warranty
Made in U. S . A. |
 | Lodestar Air XL Pneumatic Chain Hoist
Columbus McKinnon introduces a new line of Lodestar Air XL chain hoists for lifting applications from 2 to 71/2 tons. The offering provides heavy-duty hoists featuring variable speeds and higher capacities than traditional air chain hoists. Workers in automotive plants, heavy equipment manufacturing, chemical plants, refiner ies, and related rugged work environments will experience the same dependability and versatility that they have relied on from CM products for many years.
The features of the Lodestar Air XL Chain Hoist includes:
Lifting capacities up to 71/2 tons
Variable lifting speeds
Maximum lifting speed of 31 feet per minute
Forged ten-pocket oblique-lay liftwheel for smooth chain operation, constant chain speed, and reduced chain wear
Standard overload protector
Clutch acts as upper and lower limits
Six-vane rotary air motor
Pendant controls provide precise load spotting
Air actuated motor brake for positive load control
Factory tested at 125% of rated capacity « Spark resistant models available
Lifetime warranty » Made in U.S.A.
Standard Lift: 10ft.
Air inlet size: 1′′ NPT
Air supply hose size: 1′′ I.D. min.
Consumption: 175 CFM at 90 PSI |
 | ShopAir™ Chain Hoist
The CM ShopAir combines superior lifting speeds, rugged design,
and precise load spotting in a portable air chain hoist. As a workstation
hoist or a production line hoist, the ShopAir is the ideal choice.
CAPACITIES: 250 to 1,000 Lbs.
NORMAL OPERATING PRESSURE: 90 PSI (6.2 bar)
AIR CONSUMPTION: 34 cu.feet/min.
Standard ProtectorTM overload
device.
10-pocket, oblique lay liftwheel
provides longer chain life.
Epoxy powder coat finish
provides a durable exterior.
Durable reduction gearing
means reliable operation
Variable flow, two lever pendant
for precise load spotting.
Threaded external exhaust
for piping away exhaust in
clean room or painting
applications.
Small, compact design for
commercial & industrial
applications.
Industrial duty air motor for
tough applications.
Gear train is lifetime - lubricated
with non-oxidizing grease.
Hardened forged steel, latch -
type lower hook rotates 360°.
Hardened forged steel, rigid
latch - type upper hook.
Rugged cast aluminum
alloy hoist frame.
Alloy load chain.
Maximum pendant
drop - 36 ft.
Lifetime warranty against
defects in materials
and workmanship.
Made in U.S.A. |
 | AirStar Chain Hoist with Hook Suspension
Designed for general commercial applications where variable speed
pneumatic power is preferable. Rated for 1/4, 1/2 and 1 ton capacities,
this compact, lightweight hoist features:
Hoistaloy load chain for heavy duty or stainless steel
chain for spark resistant, medium duty loads
Positive action, heavy-duty shoe type brake
that holds the load
Multi-vane rotary air motor for high torque, smooth
operation
Accurately machined heat treated alloy steel
spur gears
Spark resistant models available for hazardous
environments
Pull cord or pendant throttle control available
Pull cord control hoists provide a lightweight,
economical hoist for accurate
control of loads
Optional pendant throttle control hoists
offer ergonomic, one-hand control for ease
of operation
Hook or lug suspension available
Inlet air swivel with built-in strainer provides
free hoist movement
Aluminum frame and end cover contributes to the
lightweight, easily portable, and rugged design
External brake adjustment
Limit stops prevent over-travel in upper and lowering
directions
Equa-torque gearing of alloy steel, heat treated
spur gears are accurately machined to provide
a close meshed, compact gear reduction
Tapped exhaust port 1/2 NPTF... for cleanroom
applications or to add a supplemental muffler
in addition to the built-in muffler for even
quieter operation
Lifetime warranty
Metric rated
Made in U.S.A.
Basic Hoist Data
Rated Loads: 1/4, 1/2 and 1 Ton (Spark resistant models are rated at 3/8 and 3/4 ton)
Air Pressure
Recommended: 90 PSI
Air Consumption: 48 SCFM at 90 PSI
Net Wt. (Basic Hoist): 36 lbs.
Suspension: Hook or lug
Control: Pull Cord or Pendant Throttle
Air Inlet: 3/8 NPTF
Air Supply Hose: 1/2 I.D. min.
Air Exhaust: 1/2 NPTF
Lift: 10 foot lifts are standard. Longer lifts are an optional extra.
Pendant
Control: 6 foot length is standard. Longer lengths are an optional extra.
Optional: For greater corrosion resistance, a plated load chain is offered as an optional extra.
|
| AirStar Chain Hoist with Lug Suspension
Designed for general commercial applications where variable speed
pneumatic power is preferable. Rated for 1/4, 1/2 and 1 ton capacities,
this compact, lightweight hoist features:
Hoistaloy load chain for heavy duty or stainless steel
chain for spark resistant, medium duty loads
Positive action, heavy-duty shoe type brake
that holds the load
Multi-vane rotary air motor for high torque, smooth
operation
Accurately machined heat treated alloy steel
spur gears
Spark resistant models available for hazardous
environments
Pull cord or pendant throttle control available
Pull cord control hoists provide a lightweight,
economical hoist for accurate
control of loads
Optional pendant throttle control hoists
offer ergonomic, one-hand control for ease
of operation
Hook or lug suspension available
Inlet air swivel with built-in strainer provides
free hoist movement
Aluminum frame and end cover contributes to the
lightweight, easily portable, and rugged design
External brake adjustment
Limit stops prevent over-travel in upper and lowering
directions
Equa-torque gearing of alloy steel, heat treated
spur gears are accurately machined to provide
a close meshed, compact gear reduction
Tapped exhaust port 1/2 NPTF... for cleanroom
applications or to add a supplemental muffler
in addition to the built-in muffler for even
quieter operation
Lifetime warranty
Metric rated
Made in U.S.A.
Basic Hoist Data
Rated Loads: 1/4, 1/2 and 1 Ton (Spark resistant models are rated at 3/8 and 3/4 ton)
Air Pressure
Recommended: 90 PSI
Air Consumption: 48 SCFM at 90 PSI
Net Wt. (Basic Hoist): 36 lbs.
Suspension: Hook or lug
Control: Pull Cord or Pendant Throttle
Air Inlet: 3/8 NPTF
Air Supply Hose: 1/2 I.D. min.
Air Exhaust: 1/2 NPTF
Lift: 10 foot lifts are standard. Longer lifts are an optional extra.
Pendant
Control: 6 foot length is standard. Longer lengths are an optional extra.
Optional: For greater corrosion resistance, a plated load chain is offered as an optional extra.
|
 | AirStar 6 Air Hoist
Designed for general industrial applications where variable speed
pneumatic power is preferable. Rated for loads of up to 3 tons.
This compact, lightweight hoist features:
Hoistaloy load chain for heavy duty or
stainless steel chain for spark resistant,
medium duty loads
Lightweight aluminum frame and cover
Positive action, spring biased Weston-type
load brake holds the load, provides exacting
load spotting and control
Multi-vane rotary air motor with eight vanes
for high torque, smooth operation, positive
starting
Precision cut heat treated helical and spur
gear combination for quiet, efficient operation
Pendant throttle handle is full flow design for
precision throttle capabilities
Spark resistant models available for
hazardous environments
Hook or lug suspension available
Standard overload protector device
Internal Muffler-reduces sound level
Throttle Valve—precision throttle valves
meter the air for smooth operation
Chain container optional
Lifetime warranty
Metric rated
Made in U.S.A.
Basic Hoist Data
Rated Loads: 1, 2, and 3-ton (Spark resistant models are rated at 1/2, 1 and 2 ton)
Air Pressure
Recommended: 90 PSI
Air Consumption: 70 SCFM (full load-full speed) slow speed model 80 SCFM (full load-full speed) fast speed model
Pendant Control Hose: 6 foot pendant hose standard for 10 foot lift hoist, longer hose assemblies up to 36 foot available.
Lift: 10 foot lifts are standard. Longer lifts are an optional extra.
Net Wt. (Basic Hoist): 100 pounds
Suspension: Hook or lug
Air Inlet Size: 3/4 NPTF
Air Supply Hose Size: 3/4 I.D. min.
|
 | Manguard™ Electric Hoists - *Disclaimer Note: The Weston-Type mechanical load brake is an additional charge of $150.00.**
For over 60 years, BUDGIT® Electric Chain Hoists have been designed and manufactured for tough jobs. Since 1935, BUDGIT® has led the industry in innovation, quality, and dependability. These compact, lightweight, economical hoists are built to withstand the rigors of heavy service and repeated lifting cycles. They are easy to service, require minimal maintenance, and offer excellent headroom.
Link chain hoists are ideal for heavier service applications requiring repeated lifting cycles. All link chain models are available in either hook or lug suspension.
All BUDGIT® electric hoists are equipped with a heavy duty, positive acting, short-stroke DC rectified disc motor brake. The brake is rated at 150% torque to stop and hold the load. In addition, all hoists are provided with a Weston-type mechanical load brake for load lowering control and as a backup to the hoist motor brake. A Manguard™ overload device is also standard on all BUDGIT® Electric Chain Hoists. The Manguard™ protects the hoist, operator and supporting structure by preventing dangerous overloads.
A wide variety of trolleys are provided for both hook and lugsuspended hoists. Trolleys are available in push, hand-geared and motor-driven versions. Hook-on trolleys are available in either push or hand-geared versions. Rigid Mount trolleys are available in push, hand-geared and motor-driven versions.
BUDGIT® hoists are available in a variety of controls to meet the specific need of your application. The standard control is single speed with options available for two speed and variable frequency. All BUDGIT® electric hoists and/or motor-driven trolleys are CSA approved.
|
 | BUDGIT® Low Headroom Trolley Hoists
Capacities: 1/2 to 6 ton
The BUDGIT Low Headroom Trolley Hoist offers the following features:
- Crowned tread and flanged wheels to minimize
rolling friction
- Simple, efficient design
- Reduced headroom, side clearances and end approach
for easy maneuvering of loads in tight places
- Plain trolley mounts in capacities from 11/2 to 6
tons
- Geared trolley mounts in capacities from 11/2 to 6
tons
- Standard hand chain drop 2 feet less than lift
(example: 8 foot lift hoist has 6 foot hand chain
drop)
- Chain containers, zinc-plated load and hand
chain, aluminum unwelded hand chain, Latchlok
hooks, bronze hooks, bullard hooks, larger beam
trolleys, trolley guards and units without Load
Limiter optional, depending on capacity
- Standard Load Limiter/automatic overload protection
- Lifetime warranty
- Metric rated
- Made in U.S.A.
|
 | BUDGIT® Steel Frame Hoists
Capacities: 1/4 to 25 ton
BUDGIT Steel Frame Hoists are designed, built, and tested to rigid specifications of quality and performance.
They are thoroughly engineered from every standpoint; have been made light in weight, compact
and sturdy enough to serve as a rigger’s hoist. Simplicity of design makes them easy to service and maintain,
permits longer trouble-free periods of service. They are strong, durable and fully enclosed, and thus
well suited for indoor or outdoor use under all normal hoisting applications. |
 | BUDGIT® USA Hand Chain Hoists
BUDGIT USA Hand Chain Hoists were boldly engineered to combine various materials with special
shapes and incorporating features to ensure greater strength and ruggedness, true efficiency, smooth
operation and greater reliability. BUDGIT USA Hand Chain Hoists boast features like:
- Light weight.
- Frame made from tough aluminum alloy casting with high strength qualities.
- Hand chain wheel cover of heavy pressed steel with special shape to guide
the hand chain through gag-resistant operations.
- A proven load brake design of the Weston Type for fine, sure control.
- Overload device standard. Protection from excessive overloads.
|
 | BUDGIT® USA Hand Chain Hoists Aluminum Army Type Trolley Hoists
The BUDGIT Aluminum Hand Chain Hoists is a rugged, heavy-duty hand chain hoist offered for
higher capacities. The BUDGIT chain hoist is available as a hook suspended hoist in 1/4 to 10-ton capacities.
The chain hoist as an army type is available in 1/4 to 12-ton capacities. As a low headroom trolley
hoist, it is available in 1/4 to 6 ton capacities. True vertical lift is achieved since the reeving of the additional
parts of chain is contained inside the frame. |
 | BUDGIT® Army Trolley Hoists
Capacities: 1/2 to 2 ton
1/2 to 2 TON BUDGIT Army Trolley Hoists in these capacities are notable for light weight and ability to traverse minimum radius curves freely, since the trolley units swivel. Construction is ingeniously simple. A standard BUDGIT super geared hoist is suspended on a special load bar carried at each end by a lifetime lubricated precision ball bearing-equipped two wheel trolley. Trolley units are adjustable to beam size and are interchangeable. Plain trolley may be replaced with geared unit at any time, as required. Wheels have convex-machined treads that will maintain roundness through long use. |
 | BUDGIT® Low Headroom Trolley Hoists
Push and Hand Geared Type
Capacities: 1 1/2 thru 24 ton
BUDGIT Low Headroom Trolley Hoists are designed for applications where headroom is so limited that no other type hoist can be used. They offer an ideal solution in existing structures with low ceilings. This further suggests the possibility of interesting cost savings in new construction by allowing lower ceilings.
These hoist models are not adjustable to varying size beams. Each unit is custom-built to fit the size beam specified in the order. However, the hoist can be built to operate on beams larger than standard.
|
 | BUDGIT® Swivel Truck Low Headroom Trolley Hoist
Push and Hand Geared Type
Capacities: 1/4 to 4 ton
Low Headroom Trolley Hoist incorporates two highly desirable features-compact low headroom design, and the ability to travel extremely short radius curves without binding or scraping on the I-beam or monorail. Therefore, runway can be located closer to walls than would otherwise be possible with units of heavier and bulkier construction. and, like the standard low headroom type, this hoist also permits building to close headroom dimensions, with consequent savings in construction costs.
This trolley hoist is not adjustable to varying size beams. Each unit is custom-built to fit the size beam specified in the order. However, the hoist can be built to operate on beams larger than standard, and on either standard or wide flange beams. Be sure to specify height, type and flange width of I-beam. Curve radius must always be specified when ordering.
|
 | BUDGIT® Series 2200 Air Hoists
Pull Cord or Pendant Throttle Control
Rated Loads: 1/4,1/2 and 1-Ton
BUDGIT® Series 2200 Air Hoists are precision built chain type hoists with a choice of capacities of 1/4, 1/2 and 1-ton. Each size is available in pull cord control and pendant throttle control models. Variations include link type or roller type load chains, hook suspension for portability or lug suspension for close headroom trolley hoist arrangements, and spark resistant link
|
 | BUDGIT® Series 6000 Air Hoists
Pendant Throttle Control
Rated Loads: 1,2, and 3-Tons
BUDGIT® Series 6000 Air Hoists are made in single line 1-ton, double line 2-ton and triple line 3-ton models. All units are equipped as standard with pendant throttle control, MANGUARD clutch overload protection, link chain, and hook or lug suspension. Spark and corrosion resistant models are also available.
Series 6000 Air Hoists utilize the popular BUDGIT® Electric Hoist frame. Practically all mechanical parts used in these air hoists are interchangeable with comparable BUDGIT® Electric Hoists. This assures users of a proven performance record of mechanical parts and ease of maintenance. Mechanical load brake offers load control for the most precise spotting capabilities not found in air hoists without a mechanical load brake.
|
|
Tell your suppliers you found them on ThomasNet
