Burglar Alarm CONDUCTOR: Solid bare copper. INSULATION: PVC. CONSTRUCTION: Parallel conductors. JACKET: PVC. COLOR: White.* VOLTAGE: 300 V / 150 V. UL: CM / CL2 / CL3 (R).
USES: For use as burglar alarm wire and as telephone station wire. Good for surface installation
in factories, commercial buildings, and homes in compliance with the National Electric
Code, NEC article 725 type CL3 or NEC article 800 type CM, as applicable.
CONSTRUCTION: THHN wire loosely encased in a
tube of polyvinylchloride.
USES: Traffic signal inductance loop detector wire. Meets both Cal-Trans type 2 and IMSA Spec.
No. 51-5 requirements. Detecta-Duct® is a trademark of Standard Wire & Cable Co., the
originator of tubed loop wire.
Detecta-Duct® is a trademark of Standard Wire & Cable Co.
* Cal-Trans reduced diameter cable.
MIL-DTL-5086 (SAE AS50861) CONDUCTOR: Stranded tinned-coated copper. VOLTAGE: 600 V. TEMPERATURE: 105° C. COLOR: White.
CONSTRUCTION:
M5086/1 - Polyvinylchloride insulated, nylon jacket. M5086/2 - Polyvinylchloride insulated, glass braid, nylon jacket. Sizes 10 AWG and greater have braid with lacquer.
USES: Excellent resistance to abrasion, cold, moisture, fungus, solvents and flame.
Note: MIL-DTL-5086/1 Basic Wire Specification: A Note: MIL-DTL-5086/2 Basic Wire Specification: B
Antenna Wire (MIL-W-6370C, Mil-DTL-25136, Mil-DTL-12995) CONDUCTOR: Solid hard drawn copper covered steel wire, except in the construction of W-120, where the conductor is 42 strands of 32 AWG (0.008′′) silicon bronze wire. CONSTRUCTION: Manufactured to rigid government military specifications.
USES: Primarily used for antenna systems, however, they have many applications because of their high tensile strength.
Note: Standard Wire & Cable Co. takes exception to the print durability portion of the MIL-W-6370 specification.
MIL-DTL-8777D (ASG) MS 25471 (ASG) CONDUCTOR: Stranded silver-plated copper. TEMPERATURE: 200° C CONSTRUCTION: Silicone rubber and fiber braid. COLOR: Natural (tan), white. VOLTAGE: 600V
USES: A wire for high temperature use having good flexibility where abrasion, moisture, and fluid resistance are required.
NOTE: MIL-DTL-27500 Basic Wire Specification: H
MS 27110 (ASG) CONDUCTOR: Stranded silver-plated copper VOLTAGE: 600V TEMPERATURE: 200° C CONSTRUCTION: Silicone rubber & fiber braid and extruded FEP (fluorinated ethylene
propylene). COLOR: Natural (tan)
USES: Silicone insulated FEP jacketed wire for high temperature use having good flexibility and providing excellent barrier against solvents, moisture, flame, and fungus.
Tell your suppliers you found them on ThomasNet
