Hoists: Chain related categories
 | Chester Hoist Electric Chain Hoists
Chester Electric Low Headroom Chain Hoists are designed for those applications where headroom is limited. Engineered around proven designs, these hoists provide smooth, quiet trouble free operation in a variety of Class III applications. The units are equipped with worm drive gear reducers, case hardened load chain and are available in capacities from 1 through 25 tons. Choices of lug mounted, push/pull, hand geared or motorized trolley drives are available to meet a variety of applications.
Standard features include 5 or 6 pocket load wheels, durable self-locking worm drive transmissions, sturdy steel construction, direct acting motor brakes and two precision bearings per trolley wheel. Standard controls include reversing contactors, 115V control transformers and terminal blocks in a Nema 12 enclosure. Standard units are supplied with redundant paddle type and geared limit switches for both upper and lower hook travel. Standard voltage is 230/460 Volt, 3 phase. Each unit is custom built for the specific beam specified on the order.
This hoist design permits adaptation to a variety of applications and can be custom built to meet the end user′s specific needs. Units can be supplied to fit a variety of beams including I-beams, wide flange beams and patented track. Special control enclosures and motors can be provided for hostile or hazardous environments including explosion proof applications. Trolley options include, push/pull, hand geared or a variety of motorized speeds. Push button pendants and control circuits can be designed to meet the exact requirements of the customer. Common control circuit options include, nonstandard voltages, fuses, TOLs, current load limiters, trolley soft starts, two speed or variable speed operation, inching circuits, encoders and additional limit switches for hoist and trolley travel. Special finishes including plating and corrosion resistant paints are available. Please contact our experts with your specific requirements. |
 | Coffing EC Electric Chain Hoist Hook and Lug Suspension
High performance hoists engineered for heavy duty industrial service. Designed for safety, the
EC incorporates mechanical load brake, motor brake, and overload clutch as standard.
• CAPACITIES & LIFTS - Rated loads from 1/4 to 5 Tons, with 10, 15, and 20-foot standard lifts. Other lifts available. Standard push button drop is 4-feet less than lift.
• VOLTAGE & MOTOR OPTIONS - 115/230, 208 - single phase; 230/460, 208, 220/380, 575 - three phase. 60 hertz standard,50 hertz available. Two-speed motors available (3 to 1 speed ratio).
• SUSPENSION OPTIONS - Rigid or swivel top hook, lug, plain, geared,and motorized trolley available.
• SMALL FRAME DESIGN - Features housings of cast aluminum alloy construction for minimum weight. Engineered and designed for use with motors up to 1 HP.
• LARGE FRAME DESIGN - Features load bearing housings of ductile iron construction for maximum strength. Non-load bearing housings of cast aluminum alloy for minimum weight. Engineered and designed for use with higher torque 2 and 3 HP three phase motors.
• DURABLE CONSTRUCTION - Built in compliance with ASME/ANSI B30.16 and CSA standards.
• ACCESSORIES & OPTIONS - Full line of accessories available, including Variable Frequency Drives.
• LIFETIME WARRANTY
|
 | Coffing JLC Electric Chain Hoist Hook and Lug Suspension
Designed for industrial duty performance. Compact in size, the JLC features a multiple disc motor brake, overload clutch, and chain end stop for safety.
• CAPACITIES & LIFTS - Rated loads from 1/8 to 2 Tons, with 10, 15, and 20-foot standard lifts. Other lifts available. Standard push button drop is 4-feet less than lift. CSA approved.
• VOLTAGES - 115/230 - single phase; 230/460, 208, 380, 415, 575 - three phase, 60 hertz standard, 50 hertz available.
• TWO-SPEED HOIST MODELS - Optional with 3 to 1 speed ratio, three-phase, single voltage only.
• LIMIT SWITCHES - Adjustable to regulate upper and lower load travel. Brass nuts standard for improved repeatability and chain positioning.
• OIL BATH TRANSMISSION - Precision machined alloy steel gears run in oil bath for longer, quieter operation.
• NEMA 3R PUSH BUTTON STATION - Ergonomic design fits operator’s hand for thumb or two-handed operation. 24 Volt Control for operator safety. 115 Volt Control available upon request.
• FRAME - Compact aluminum housing for portability and ease of installation.
• ACCESSORIES - Full line of accessories available, including Variable Frequency Drives.
• CHAIN CONTAINER - Standard on lifts up to 20 ft. single chain / 10 ft. double chain
• LIFETIME WARRANTY |
 | Coffing ED Extended Duty Electric Chain Hoist
For Special Applications
• Capacity 1/2 - 2 Ton
• Standard lift is 10 feet.
• Totally enclosed, fan-cooled motor for extended
operation.
• Highly adaptable for automated plating, heat treating, steel warehouse, foundry, and machine shop use. |
 | Coffing EC Turnover Electric Chain Hoist
For Special Applications
• Capacity 1/4 - 4 Ton
• Standard lift is 15 feet.
• Heavy-duty, specially modified electric chain
hoist with two load hooks.
• Completely inverts virtually any shape load with use of simple slings and successively repositioned load hooks. |
 | CM Lodestar Electric Chain Hoist
The balanced, integrated, proven design of the Lodestar has made it the most popular electric chain hoist in the industry. Lodestar gives you more value for your money including:
• Quick change voltage board-change from low voltage to high voltage by simply repositioning receptacle
• Up to 3 ton capacities for heavy-duty industrial applications
• Gear train lifetime lubricated with non-oxidizing grease
• Precision machined and hardened liftwheel with hardened chain guides for precise chain liftwheel fit
• Gearing designed for exceptionally long life and quiet operation
• H4 duty standard
• Rugged control station (NEMA 4X)
• Hoist duty motor, standard Protector overload device and standard screw type limit switches
• Hardened, forged steel, latch type hooks and Hoistaloy load chain for long, dependable service
• Easy to install and maintain
• No special tools required to disassemble
• Lifetime warranty
• Each hoist thoroughly inspected and tested to over 125% of rated load prior to shipment
• Meets ASME B30.16
• Metric rated
• Made in U.S.A.
Special applications
• Harsh environment hoists available for severe duty of plating, galvanizing and washdown applications
• Hoists with climbing capability available for temporary rigging or lifting applications — must be used in inverted position only
• Hoists with creep control allow precise positioning through field adjustment within the time delay range of .05 sec. to 3 sec.
• Articulating suspension 3 ton only |
 | CM Lodestar XL Electric Chain Hoist
Columbus McKinnon introduces an expanded
line of Lodestar XL electric chain hoists for lifting applications from 2 to 71⁄2 tons. The new offering provides heavy-duty hoists featuring faster speeds, less reeving, and higher capacities than traditional chain hoists. Workers in automotive plants, heavy equipment manufacturing, paper mills, and related rugged work environments will experience the same dependability and versatility that they have relied on for many years.
The NEW features of the Lodestar XL Electric
Chain Hoist include:
• Lifting capacities up to 7 1⁄2 tons
• Increased lifting speeds throughout the line
• Double reeved units with 3-5 ton lifting capacities
• Maximum lifting speed of 30 feet per minute
A glimpse of the many features of the Lodestar XL that have honed its reputation for durability and long life:
• Heavy-duty, multiple disc braking system
• Forged ten-pocket oblique-lay liftwheel for smooth chain operation, constant chain speed, and reduced chain wear
• Gearing operated in oil bath for increased lifting life and quiet operation
• Rated H-4, heavy-duty
• Standard overload protector
• Screw-type limit switches
• Thermally protected motor
• Factory tested at 125% of rated capacity
• Made in U.S.A. |
 | CM Shopstar Electric Chain Hoist
The ShopStar electric chain hoist features rugged construction and high H4 duty cycle. It keeps lifting and lifting, up to 1,000 pounds and 300 motor starts per hour. Additional features and benefits include:
• H4 duty cycle (300 motor starts/hour)
• Easy installation and maintenance
• Standard protector overload device
• 10 pocket oblique lay liftwheel provides longer chain wear
• Epoxy powder coat finish
• 61⁄2 ft. power cord with molded 3 prong plug on 115 volt units
• NEMA 4 industrial rated control station
• Optional impact-resistant chain container available
• Gear train lifetime lubricated with non-oxidizing grease
• CM Hoist Alloy Load Chain (zinc plated optional)
• Thermally protected hoist duty motor
• Dual braking system — D.C. plus regenerative
• Rugged cast aluminum alloy hoist frame
• 5:1 design factor
• Small, compact design for commercial & industrial applications
• Rigid hook suspension prevents tangling of power cord
• Hardened forged steel latch style lower hook rotates 360°
• Totally enclosed non-ventilated
hoist frame protects motor from environmental contamination
• True vertical lift
• Precision bearings used throughout hoist
• Lifetime warranty
• Made in U.S.A. |
 | CM Valustar Electric Chain Hoist
Designed specifically for general commercial applications.
This compact, lightweight hoist features:
• Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear
• Standard lift 10, 15 & 20 ft.
• 5 ft. power cord length
• Heavy-duty caliper type AC brake
• Rugged NEMA 4 control station, 115 volt control circuit
• Easy to install and maintain
• Hoistaloy load chain for smooth operation and maximum chain life
• Efficient regenerative braking system to avoid heat generation in power train
• Enclosed hoist duty motor
• Gear train lifetime lubricated with non-oxidizing grease
• Latch type hooks
• Hook suspension standard
• Fully machined and heat treated gear train
• Standard overload Protector device
• H3 duty-1 phase; H-4 duty-3 phase
• One-year warranty
• Metric rated
• Made in U.S.A. |
 | CM Powerstar Electric Chain Hoist
Designed specifically as an alternative to wire rope hoists for high speed lifting of loads from 2 to 20 tons in a space saving chain hoist.
• H-4 or better rated duty cycle
• Designed for heavy-duty industrial applications from 2 to 20 ton capacities
• Liftwheel has machined chain pockets and is heat treated alloy steel for maximum strength and wear resistance
• Efficient regenerative braking system avoids heat generation in power train
• Motors up to 7 1/2 h.p. provide a wide range of lifting speeds
• Single or two speed controls. Two speed models operate on 3:1 speed ratio
• Standard adjustable upper and lower screw limit switches
• Standard overload Protector device
• Hoistaloy load chain can be easily inspected for wear and abuse
• True vertical lift
• Factory tested to 125% of rated capacity prior to shipment
• Metric rated except for 10 & 20 ton capacities
• Rugged aluminum alloy hoist frame
• Chain guide surrounds liftwheel
• Machined and hardened steel Helical gears used throughout hoist for optimum performance and mechanical efficiency.
• Extensive use of life-lubricated bearings plus sealed oil bath power train reservoir for minimum maintenance.
• Dual braking system
• Heavy duty, industrial single speed controls include magnetic reversing contactor which operates on 115 volts provided by a control transformer.
• Totally enclosed, ball bearing, 30 minute rated, thermally protected, hoist duty motor is standard.
• Push button control is weatherproof
(NEMA 4 rated).
• Drop of push button control is 4 ft. above hook at lowest position, unless otherwise specified.
• External push button chain strain relief is standard.
• Power cord length is 2 1/2 ft. unless otherwise specified.
• Trolley design permits easy adjustment for installation on a broad range of beam flange widths.
• Trolley wheels have double row, tapered roller bearings plus machined and hardened universal treads to permit operation on American Standard or flat flanged sections interchangeably.
• Spur gearing used in all motorized trolleys for improved efficiency and durability.
• Drop of hand chain on geared trolleys is 2 ft. above hook at lowest position, unless otherwise specified.
• Designed to be maintained “on the beam.”
• Up to 600 lineal feet of chain
• Weatherproof (NEMA3R)
• Lifetime warranty
• Made in U.S.A. |
 | CM Lodestar Air XL Pneumatic Chain Hoist
Columbus McKinnon introduces a new line of Lodestar Air XL chain hoists for lifting applications from 2 to 71⁄2 tons. The offering provides heavy-duty hoists featuring variable speeds and higher capacities than traditional air chain hoists. Workers in automotive plants,
heavy equipment manufacturing, chemical plants,
refineries, and related rugged work environments will experience the same dependability and versatility that they have relied on from CM products for many years.
The features of the Lodestar Air XL Chain Hoist includes:
• Lifting capacities up to 71⁄2 tons
• Variable lifting speeds
• Maximum lifting speed of 31 feet per minute
• Forged ten-pocket oblique-lay liftwheel for smooth chain operation, constant chain speed, and reduced chain wear
• Standard overload protector
• Clutch acts as upper and lower limits
• Six-vane rotary air motor
• Pendant controls provide precise load spotting
• Air actuated motor brake for positive load control
• Factory tested at 125% of rated capacity
• Spark resistant models available
• Lifetime warranty
• Made in U.S.A.
• Standard Lift: 10 ft.
• Air inlet size: 1˝ NPT
• Air supply hose size: 1˝ I.D. min.
• Consumption:175 CFM at 90 PSI
• Exhaust:11/4˝ NPT
|
 | CM ShopAir Chain Hoist
Compact, powerful, and precise for assembly and manufacturing applications up to 1,000 pounds.
The CM ShopAir combines superior lifting speeds, rugged design, and precise load spotting in a portable air chain hoist. As a workstation hoist or a production line hoist, the ShopAir is the ideal choice.
CAPACITIES: 250 to 1,000 Lbs.
NORMAL OPERATING PRESSURE: 90 PSI (6.2 bar)
AIR CONSUMPTION: 34 cu.feet/min.
• Standard ProtectorTM overload device.
• 10-pocket, oblique lay liftwheel provides longer chain life.
• Epoxy powder coat finish provides a durable exterior.
• Durable reduction gearing means reliable operation
• Variable flow, two lever pendant for precise load spotting.
• Threaded external exhaust for piping away exhaust in clean room or painting applications.
• Small, compact design for commercial & industrial applications.
• Industrial duty air motor for tough applications.
• Gear train is lifetime - lubricated with non-oxidizing grease.
• Hardened forged steel, latch -type lower hook rotates 360°.
• Hardened forged steel, rigid latch - type upper hook.
• Rugged cast aluminum alloy hoist frame.
• Alloy load chain.
• Maximum pendant drop - 36 ft.
• Lifetime warranty against defects in materials and workmanship.
• Made in U.S.A.
|
 | CM Airstar Chain Hoist
Designed for general commercial applications where variable speed pneumatic power is preferable. Rated for 1/4, 1/2 and
1 ton capacities, this compact, lightweight hoist features:
• Hoistaloy load chain for heavy duty or stainless
steel chain for spark resistant, medium duty loads
• Positive action, heavy-duty shoe type brake
that holds the load
• Multi-vane rotary air motor for high torque,
smooth operation
• Accurately machined heat treated alloy steel
spur gears
• Spark resistant models available for hazardous
environments
• Pull cord or pendant throttle control available
• Pull cord control hoists provide a lightweight,
economical hoist for accurate control of loads
• Optional pendant throttle control hoists offer
ergonomic, one-hand control for ease of operation
• Hook or lug suspension available
• Inlet air swivel with built-in strainer provides
free hoist movement
• Aluminum frame and end cover contributes to the
lightweight, easily portable, and rugged design
• External brake adjustment
• Limit stops prevent over-travel in upper and
lowering directions
• Equa-torque gearing of alloy steel, heat treated
spur gears are accurately machined to provide a close meshed, compact gear reduction
• Tapped exhaust port 1/2 NPTF... for cleanroom
applications or to add a supplemental muffler
in addition to the built-in muffler for even
quieter operation
• Lifetime warranty
• Metric rated
• Made in U.S.A. |
 | CM Airstar 6 Air Hoist
Designed for general industrial applications where variable speed pneumatic power is preferable. Rated for loads of up to 3 tons.
This compact, lightweight hoist features:
Rated Loads: 1, 2, and 3-ton (Spark resistant models are rated at 1/2, 1 and 2 ton)
Air Pressure
Recommended: 90 PSI
Air Consumption: 70 SCFM (full load-full speed) slow speed
model 80 SCFM (full load-full speed) fast speed model
Pendant Control Hose: 6 foot pendant hose standard for 10 foot lift hoist, longer hose assemblies up to 36 foot available.
Lift: 10 foot lifts are standard. Longer lifts are an optional extra.
Net Wt. (Basic Hoist): 100 pounds
Suspension: Hook or lug
Air Inlet Size: 3/4 NPTF
Air Supply Hose Size: 3/4 I.D. min.
• Hoistaloy load chain for heavy duty or stainless steel chain for spark resistant, medium duty loads
• Lightweight aluminum frame and cover
• Positive action, spring biased Weston-type load brake holds the load, provides exacting load spotting and control
• Multi-vane rotary air motor with eight vanes
for high torque, smooth operation, positive starting
• Precision cut heat treated helical and spur gear
combination for quiet, efficient operation
• Pendant throttle handle is full flow design for
precision throttle capabilities
• Spark resistant models available for hazardous
environments
• Hook or lug suspension available
• Standard overload protector device
• Internal Muffler-reduces sound level
• Throttle Valve—precision throttle valves meter the air for smooth operation
• Chain container optional
• Lifetime warranty
• Metric rated
• Made in U.S.A. |
 | CM Hurricane 360 Hand Chain Hoist
The New CM Hurricane unleashes a full circle of flexibility for lifting and pulling.
• Standard Load Limiter - For simple, automatic overload protection.
• Improved Braking Power - With its braking system, the CM Hurricane is exceptionally quiet, and improves operational safety and serviceability.
• Powder Coated Finish - For corrosion protection.
• Heat Treated Steel Gearing - All internal gears and pinions are heat treated steel for high srength and lng life.
• Chain Guide and Stripper - Assures load chain alignment.
• Precision 4-Pocket Liftwheel - Fully machined for better hain fit and reduced wear allowing for accurate movement of the load chain.
• Hardened Steel Chain - Alloy steel load chain assures high strength and long wear life.
• Minimal Maintenance - Easily disassembled, requiring no special tools.
• Meets ASME B30.16 - And European CE Standard
• 5-Year Warranty - Against defects in materials
and workmanship. |
 | CM Cyclone Hand Chain Hoist
One of the most popular and reliable hoists ever designed, the Cyclone combines superior engineering, efficiency and durability. Available in a variety of capacities from 1/4 ton to 10
tons, Cyclone features:
• Most interchangeability of parts in the industry
• Standard Load Limiter for simple, automatic
overload protection
• Enclosed contoured Weston-type automatic brake for positive load control
• High-efficiency spur gearing for greater lift with minimum effort
• Rugged Hoistaloy chain for added strength and durability
• Fully machined, forged liftwheel pockets for easier lifting and smooth free chaining
• High-strength aluminum alloy castings in frame and covers
• Inspected over 75 times to meet or exceed HMI and ASME/ANSI performance and safety standards
• Standard hand chain drop is 2 feet less than lift, (example: 8 foot lift hoist has 6 foot hand chain drop)
• Lifetime warranty
• Metric rated
• Made in U.S.A.
Options Include:
• Fabric chain bags
• Metal chain containers
• Zinc-plated load and hand chain
• Unwelded hand chain
• Latchlok hooks
• Bronze hooks
• Bullard hooks
• Eye-type suspension |
 | CM Cyclone Army Type Hand Chain Hoist
Same quality and performance as the Cyclone in a compact, low headroom integral trolley mount. Ideal for applications requiring a moveable hoist including:
• Rugged steel loadbars connected directly to hoist frame
• Reduced headroom, side clearances and end approach for easy maneuvering of heavy loads in tight places
• Standard Load Limiter automatic overload protection
• Plain and geared trolley mounts in capacities from 1/4 to 12 tons
• Universal tread trolley wheels for operation on sloped or flat flanged beams
• Standard hand chain drop 2 feet less than lift (example: 8 foot lift hoist has 6 foot hand chain drop)
• Chain containers, zinc-plated load and hand chain, aluminum unwelded hand chain, Latchlok hooks, bronze hooks, bullard hooks, larger beam trolleys, trolley guards, and units without Load Limiter optional, depending on capacity
• Lifetime warranty
• Metric rated
• Made in U.S.A. |
 | CM Cyclone Low Headroom Hand Chain Hoist
Cyclone and trolley all in one unit for low headroom applications features:
• Crowned tread and flanged wheels to minimize rolling friction
• Simple, efficient design
• Reduced headroom, side clearances and end approach for easy maneuvering of loads in tight places
• Plain trolley mounts in capacities from 1/2 to 6 tons
• Geared trolley mounts in capacities from 1 1/2 to 6 tons
• Standard hand chain drop 2 feet less than lift
(example: 8 foot lift hoist has 6 foot hand chain drop)
• Chain containers, zinc-plated load and hand chain, aluminum unwelded hand chain, Latchlok hooks, bronze hooks, bullard hooks, larger beam trolleys, trolley guards and units without Load Limiter optional,depending on capacity
• Standard Load Limiter/automatic overload protection
• Lifetime warranty
• Metric rated
• Made in U.S.A. |
 | CM Series 602 & 603 Mini Ratchet Lever Hoist
Mini-Ratchet Lever Hoists lift up to 1100 lbs. plus the convenience of toolbox storage. The CM Series 603 & 602 Mini- Hoists are the most compact ratchet lever hoists in the market, perform just like the larger models, plus come standard with these great features:
• Plated load chain is standard.
• Weston-type load brake.
• Rubber hand grip for better comfort and security.
• Lightweight design for ease of portability. Use in confined conditions with one-hand operation.
• Forged upper and lower hooks with latches standard.
• Impact resistant, all-steel frame, gear case and cover.
• Hardened link-type alloy steel load chain for strength and long wear.
• Free wheeling feature serves to quickly attach the load.
• Metric rated.
|
 | CM Series 653 Lever Operated Hoist
Ideal for construction and industrial applications
The Series 653 lever operated hoist is a high quality, rugged, steel tool for close quarter pulling, stretching, and hoisting applications.
Its characteristic short handle, along with minimal lever pull effort, make this tool ideal for a broad range of applications.
• Capacities from 3/4 to 6 tons
• Impact resistant, stamped steel frame, gear case and cover for durability and light weight.
• Powder coated finish for added corrosion protection.
• Hardened steel load sharing gears.
• Double pawl arrangement for assured load control.
• Two chain guide rollers for positive chain engagement.
• Weston type braking system for positive load control and positioning.
• Simple one-handed, free chaining for fast load attachment.
• Hardened steel chain for strength and long wear life.
• Forged upper and lower hooks with heavy cast steel latches.
• Rubber handle grip for added operator comfort.
• Minimal maintenance with no special tools required.
• 5-year warranty against defects in materials and workmanship.
• Metric rated.
• Meets ASME B30.21 – Manually Lever Operated Hoist Standard and European CE Standard.
• Designed and manufactured by Columbus McKinnon Corporation. |
 | CM Rigger Lever Operated Hoist
Designed for moderate commercial applications, this lightweight, compact tool stores easily and features:
• Flexible, non-binding CM load chain
• Forged upper and lower hooks with latches standard
• Free-wheeling chain for fast attachment
• Clover leaf chain guides and stripper seat chain in liftwheel reduce chance of jamming
• Unlimited lift by ordering any length chain
• Ratchet, driving pawl and holding pawl for load control
• One lever used to change from lifting to lowering and back to lifting
• Easy maintenance
• One-year warranty
• Metric rated
• Made in U.S.A. |
 | Yale Model KALC Air Hoists
These YALE KALC Air Hoists are precision built chain type hoists which are built in three capacity sizes: 1, 2, and 3 ton. All models use coil type load chain and have pendant throttle controls. There are model variations with hook or lug type suspensions. Hoists are also provided in spark resistant models and corrosion resistant models.
|
 | Yale Model YAL Air Hoists
Capacities from 1/4 to 1 ton for standard models,
and 3/8 to 3/4 ton for spark resistant.
The Yale Model SAL Air Hoists are precision, air operated link type chain hoists. Each unit is supplied with a pendant throttle control station for controlling the lifting and lowering speeds and an upper latch type hook for suspending the hoist from a fixed support or trolley.
•Standard Protector overload device.
•10-pocket, oblique lay liftwheel provides longer chain life.
•Epoxy powder coat finish.
•Variable flow, two lever pendant for precise load spotting.
•Threaded external exhaust for piping away exhaust in clean room or painting applications.
•Small, compact design for commercial & industrial applications.
•Industrial duty air motor for tough applications.
•Hardened forged steel, latch-type lower hook rotates 360 degrees.
•Hardened forged steel, rigid latch-type upper hook.
•Rugged cast aluminum alloy hoist frame.
•Alloy load chain.
•Gear train is lifetime-lubricated with non-oxidizing grease.
•Lifetime warranty against defects in materials and workmanship.
•Made in USA. Overloading and improper use can result in injury. |
 | Yale ACL Air Chain Hoists
Models are available in capacities from 1/4 to 6 ton. This hook mounted hoist is lightweight and portable. Pull cord control is standard with optional twist type pendant. |
 | Yale Model XL Air Hoists
Continuous Duty Service
Yale XL Model - 2 to 7 1/2 Tons
Air Chain Hoists features continuous duty service for precise, infinitely variable
speed and accurate load spotting. Ideal for use in hazardous areas where
electricity is not an option.
• Capacities & Lift - Rated loads from 2 to 7 1/2 Tons.10-foot lifts
are standard. Longer lifts are available.
• Speeds - 9 to 31 feet per minute (FPM) at 90 PSI air operating pressure.
• Controls - Pendant controls provide precise load spotting.
• Hook and lug suspension available. Lug suspension is for use with plain,
geared and air motor drive trolleys.
• Motor - 6-vane air motor produces high, uniform torque for smooth,
easy lifting.
• Spool Valve - Precision spool valves meter air for smooth starts.
• Brake - Air actuated motor brake for positive load control.
• Transmission Gears - Precision machined steel run in oil bath
for longer quieter operation.
• Forged Ten-pocket Oblique-lay Liftwheel - For smooth chain operation,
constant chain speed, and reduced chain wear.
• Overload Clutch - Protects hoist, operator, and supporting structures
from damaging overloads. Clutch acts as upper and lower travel limits.
• Spark Resistant Models - For hazardous environments, includes
copper plated hooks and lower bottom blocks, stainless steel hook
latch, and plated load chain.
• Lifetime Warranty |
 | Yale PE2 Ratchet Lever Hoists
Capacities: 3/4 to 6 Ton
The efficient Yale PE2 hoist require relatively little effort to operate. All controls face the operator for convenience and safety. Free wheeling chain adjustment lever lets you play out the chain quickly and easily on unloaded units for fast hook-ups. Yale PE2 ratchet lever hoist has been proven under the toughest of applications.
The PE2 is designed for heavy-duty construction and industrial applications. Used to pull, lift, drag or stretch, it feature:
•Tough Aluminum alloy construction and powder coat finish
•Weatherproof for outdoor service
•Simple construction with fewer parts for ease of maintenance and lower inventories
•Hoistaloy hardened steel link type load chain for strength, long wear life and flexibility
•Weatherized Weston-type automatic braking system for positive load control
•Easy, one-hand operation and control
•Forged upper and lower hooks with latches standard
•Free wheeling for fast and easy attachment to load
•Upper and lower Latchlok hooks available for all capacities
•Optional Load Limiter protection device stops transmission of lever forces protecting against dangerous overload
•Optional anchor sling simplifies attachment to allow anchor hook to swivel in tight space applications ( 3/4 & 1 1/2 ton units only)
•Optional Load Sentry warns of overload condition
•Optional shorter lever for 3/4 & 1 1/2 ton units available
•Optional zinc-plated chain available
•Lifetime warranty
•Metric rated
•Made in U.S.A.
|
 | Yale PD2 Ratchet Lever Hoists
Capacities: 3/4 to 6 ton
We built the Yale PD2 hoists to be extra rugged and durable. Housings are high-strength malleable cast iron to protect the gearing and brake from shock, dirt and mud. Alloy steel gears are precision machined and heat-treated for exceptional durability and long life.
The self-actuating Weston type load brake provides instantaneous brake and release action for positive, non-slip lifting and lowering. All working surfaces are plated to prevent corrosion and reduce wear.
•Link chain models
•Rugged malleable iron housings and handles
•Weston type load brake and single locking pawl type
•Chain free-wheels for fast hook-ups
•Built for maximum durability
|
 | Yale PM Ratchet Lever Hoist
Capacities: 3/4 to 3 Ton
The Yale PM ratchet lever hoist is ideally suited for applications that demand maximum portability and ruggedness. The 3/4 ton hoist handle is a mere 12 inches long and requires only 7 lbs. of handle pull to lift a capacity load. This makes the Yale PM ratchet lever hoist an outstanding performer in cramped or awkward quarters. A 25° minimum lever stroke means that you can lift or lower a load in very small increments for precise positioning.
•Short handle design operates in cramped spaces
•Requires minimum handle pull to lift capacity load
•Self-adjusting screw and disc type load brake compensates for brake lining wear for safe, sure stops
•Aluminum alloy housing and handle are rugged and lightweight: 3/4 ton unit weighs only 13 lbs.
•Chain free-wheels on unloaded units for fast hook-ups
•Minimum 25° lever stroke permits extremely precise load placement or ′′micro-inching′′ |
 | Yale PSB Steel Body Lever Hoists
Capacities: 3/4 to 6 Ton
The Yale PSB Steel-Body Lever Hoist has all the features of premium lever hoist but is priced for value. The innovative housing design makes the Yale PSB more compact and lightweight than ever before. Our state-of-the-art free wheel control allows you to quickly and easily take-up ′slack′ chain. A cushioned rubber grip is included on all models for ease of operation. The Yale PSB lever hoist is the best value in the market-
•Lifts- 5-10-15-20 feet.
•Portable and Durable: All steel construction, lightweight and impact resistant.
•Efficient Lifting and Load Positioning: Double reduction gearing and short handle length reduce operator′s effort.
•Positive Load Control: Enclosed screwtype load brake stays clean and dry for positive positioning.
•Longer Chain Life: Through hardened load chain provides high strength and resists wear.
•Ease of Free Chaining: Free wheel control provides fast take-up of slack chain (position the control lever to neutral). Lifetime warranty on free chain knob.
•Safety Latches: 360 degree swiveling hooks are equipped with latches for positive load engagement. |
 | Yale SHA Hand Chain Hoist
Capacities: 1/2 to 50 ton
The SHA stamped steel, hand chain hoist is an excellent, lower cost option in the Yale line. The compact, lightweight design is ideal for construction and contractor applications where portability and easy rigging are critical.
•Standard lifts of 10, 15 & 20 feet. Standard hand chain drop is 2-feet less than lift.
•Compact and Lightweight: Designed for portability and easy installation. Compact gear housing provides low headroom.
•Easy to Operate - Lubricated bearings and bushings, bearing-mounted options, and heat-treated spur gearing ensure smooth and efficient operationwith minimal effort. Designed for easy inspection and maintenance.
•Safety and Load Control - Mechanical load brake engages instantly for precise load holding and positioning. 360° swivel hooks with safety latches ensure positive load engagement.
•Durable - Through hardened load chain provides added strength and wear resistance for greater chain life. Stamped steel housing withstands rugged conditions.
•Lifetime Warranty |
 | Yale Load King LH2 Hook Mount Hand Hoists
Capacities: 1/4 to 10 ton
One of the most popular and reliable hoists ever designed, the Load King LH2 combines superior engineering, efficiency and durability. Available in a variety of capacities from 1/4 ton to 10 tons, Load King LH2 features:
•Most interchangeability of parts in the industry
•Standard Load Limiter for simple, automatic overload protection
•Enclosed contoured Weston-type automatic brake for positive load control
•High-efficiency spur gearing for greater lift with minimum effort
•Rugged Hoistaloy chain for added strength and durability
•Fully machined, forged liftwheel pockets for easier lifting and smooth free chaining
•High-strength aluminum alloy castings in frame and covers
•Inspected over 75 times to meet or exceed HST/ASME/ANSI performance and safety standards
•Standard hand chain drop is 2 feet less than lift, (example: 8 foot lift hoist has 6 foot hand chain drop)
•Chain containers, zinc-plated load and hand chain aluminum unwelded hand chain, Latchlok hooks, bronze hooks, eye-type suspension, bullard hooks and units without Load
•Limiter optional, depending on capacity
•Lifetime warranty
•Metric rated
•Made in U.S. |
 | Yale Load King LTP2, LTG2 Army Type Trolley Hoist
Capacities: 1/4 to 12 ton
Same quality and performance as the Load King LH2 in a compact, low headroom integral trolley mount. Ideal for applications requiring a moveable hoist including:
•Rugged steel loadbars connected directly to hoist frame
•Reduced headroom., side clearances and end approach for easy maneuvering of heavy loads in tight places
•Standard Load Limiter automatic overload protection
•Plain and geared trolley mounts in capacities from 1/4 to 12 tons
•Universal tread trolley wheels for operation on sloped or flat flanged beams
•Standard hand chain drop 2 feet less than lift
•Chain containers, zinc-plated load and hand chain, aluminum unwelded hand chain, Latchlok hooks, bronze hooks, bullard hooks, larger beam trolleys, trolley guards, and units without Load Limiter optional, depending on capacity
•Lifetime warranty
•Metric rated
•Made in U.S.A. |
 | Yale Load King Low Headroom Trolley Hoist
Capacities: 1/2 to 6 ton
Hoist and trolley all in one unit for low headroom applications features:
•Crowned tread and flanged wheels to minimize rolling friction
•Simple, efficient design
•Reduced headroom, side clearances and end approach for easy maneuvering of loads in tight places
•Plain trolley mounts in capacities from 1/2 to 6 tons
•Geared trolley mounts in capacities from 1-1/2 to 6 tons
•Standard hand chain drop 2 feet less than lift
•Chain containers, zinc-plated load and hand chain, aluminum unwelded hand chain, Latchlok hooks, bronze hooks, bullard hooks, larger beam trolleys, trolley guards and units without Load Limiter optional, depending on capacity
•Standard Load Limiter/automatic overload protection
•Lifetime warranty
•Metric rated
•Made in U.S.A. |
 | Little Mule LMSC Ratchet Lever Hoists
For Heavy Duty Construction and Industrial Applications
Rugged and Lightweight
• Rated loads of 3/4, 1 1/2, 3 and 6 tons, with 5, 10, 15, and 20 foot lifts.
• Impact resistant stamped steel housing withstands years of rigorous use.
• Compact design makes the LMSC extremely portable and easy to rig.
• Through hardened load chain provides high strength and resists wear.
Easy To Operate
• Low handle effort is provided by double reduction gearing and short handle with cushioned, ergonomic grip. The result is easy operation with minimal handle effort.
• 360° rotating handle provides versatile rigging options when used in confined spaces.
• State-of-the-art free wheeling mechanism allows quick and easy one-handed take-up and positioning of slack chain.
Engineered For Reliable Operation
• Optional load limiter alerts operator of a possible overload by allowing the handle to rotate without lifting the higher-than-rated load.
The load limiter can be field-installed.
• Enclosed screw and disc-type load brake stays clean and dry for positive load holding and positioning. Latches on hooks assist load hookup.
• Meets or exceeds minimum 4:1 design factor and all requirements of ASME/ANSI Standard B-30.21. All units tested at 125% of rated load. |
 | Little Mule LMR Ratchet Lever Hoists
Aluminum Construction Low Handle Effort
Rugged and Lightweight
• Rated loads of 3/4, 1, 1 1/2, and 3 tons, with 5, 10, 15, and 20 foot lifts.
• Unit and handle made from high strength ductile aluminum alloy. Compact design increases portability and rigging efficiency.
Easy & Reliable Operation
• Double reduction gearing and short handle provide lowest handle effort in the Little Mule line.
• Provides versatile rigging options when used in confined spaces.
• State-of-the-art free wheeling mechanism allows quick and easy one-handed take-up and positioning of slack chain.
• Meets or exceeds minimum 4:1 design factor and all requirements of ASME/ANSI Standard B-30.21. All units tested at 125% of rated load.
Special Model Features
• Enclosed self-adjusting screw-and-disc type load brake stays clean and dry - eliminating drift and backlash for positive load control. 25° minimum lever stroke allows “micro-inching”
load positioning.
• Hardened steel load chain provides high strength and resists wear. Alloy steel spur gearing is heat-treated for long life and is
lifetime lubricated.
|
 | Little Mule TB602 & TB603 Mini-Lever Hoists
Handy Mini-Hoist - Easy Tool Box Storage
Compact Package with Great Standard Features
• Rated loads of 550 Lbs. (TB-602)and 1100 Lbs. (TB-603)
• Plated load chain is standard.
• Weston-type load brake.
• Rubber hand grip for better comfort and security.
• Forged upper and lower hooks with latches standard.
Tough Construction — Easy Operation
• Impact resistant, all-steel frame, gear case and cover.
• Hardened link-type steel load chain for strength
and long wear.
• Lightweight design for ease of portability. Use in confined conditions with one-hand operation.
• Free wheeling feature serves to quickly attach
the load.
• Metric rated
The uses are endless. Performs just like the larger hoists, but small enough to fit in a hard hat! |
 | Little Mule FLC Electric Chain Hoists
Industrial Duty — Market’s Best for Performance & Value • 1/4 - 2 Ton
Versatile Operation
• Rated loads from 1/4 to 2 Ton Metric Rated.
Standard lifts of 10, 15 and 20 feet. Other lifts
available. CSA approved.
• Voltages — 115/230 - single phase; 230/460, 208, 575 - three phase, 60 Hertz Standard, 50 Hertz available.
• IEC style controls meet or exceed electrical codes.
• H4 Duty Rating — Handles heavy duty work
environments
• Made in U.S.A.
Special Model Features
• Five -Pocket Load Sheave increases chain and sheave engagement 25% over hoists with conventional load sheaves. Provides smoother lifting and reduces chain wear.
• Adjustable limit switches regulate upper and lower load travel. Brass nuts standard for improved repeatability and chain positioning.
• Mechanical Overload Protection Device — Helps protect hoist, operator, and supporting structures form damaging overloads, chain jamming and reverse phasing.
• Multiple Disc Motor Brake — Heavy duty design for reliable operation. Direct acting for positive load holding and spotting.
• Molded quick connect standard chain container prevents slack chain from interfering with operator. 20 Ft. lift single reeved, 10Ft. lift double reeved.
• One Chain Size — All models reduce inventory.
• Top Suspension — Quick-change from hook mount
to lug mount.
• Weather Resistant — Hoist is NEMA 3R enclosure. |
| Coffing EC Electric Chain Hoist Trolley Suspension
COFFING ECT, ECGT, and ECMT Models - Plain, geared
and motorized trolley suspensions with all the features of basic EC models for added flexibility in a variety of applications.
• PLAIN TROLLEY - For manual positioning of hoist and load.
• GEARED TROLLEY - For more precise positioning of hoist and load. Standard hand chain drop is 2-feet less than lift.
• MOTORIZED TROLLEY - For faster positioning of hoist and load over longer distances. 35 or 75 FPM speeds standard with optional speeds of 18, 24, 50, 100, and 150 FPM.
• VOLTAGES - 115/230, 208 - single phase; 230/460, 208, 220/380, 575 - three phase. 60 hertz standard, 50 hertz available.
• TWO-SPEED MOTORIZED TROLLEY MODELS - Optional with 3 to 1 speed ratio, three-phase, single voltage only.
• WRAP-AROUND SIDE PLATES - Act as safety lugs and as bumpers to protect wheels. Available to fit American Standard I-Beams, wideflange,
and patented track beams. Specify track type and beam size.
• PRECISION TROLLEY WHEELS - Machined, cast iron wheels with sealed, lifetime lubricated ball bearings for extended trolley life.Motorized trolley wheels heat treated for added durability. Bronzeand stainless steel wheels optional.
• TWO TROLLEY DESIGNS - 4-wheel design on 1/4 - 3 ton negotiates 48” minimum radius curve, including patented track applications. 8-wheel design on 4 and 5 ton reduces beam flange stress.
• ACCESSORIES & OPTIONS - Full line available to meet a variety of applications.
• LIFETIME WARRANTY |
| Coffing JLC Electric Chain Hoist Trolley Suspensions
Plain and motorized trolley suspensions with all the features of the basic JLC models for added flexibility in a variety of applications.
• PLAIN TROLLEY - For manual positioning of hoist and load.
• MOTORIZED TROLLEY - For faster positioning of hoist and load over longer distances. 35 or 75 FPM speeds standard - other speeds available. Trolley brake optional.
• VOLTAGES - 115/230 - single phase; 230/460, 208, 380, 415, 575 - three phase, 60 hertz standard, 50 hertz available.
• TWO-SPEED MOTORIZED TROLLEY MODELS - Optional with 3 to 1 speed ratio, three-phase, single voltage only.
• WRAP-AROUND SIDE PLATES - Act as safety lugs and as bumpers to protect wheels. Available to fit American Standard I-Beams, wideflange, and patented track beams.
• PRECISION TROLLEY WHEELS - Machined, cast iron wheels with sealed, lifetime lubricated ball bearings for extended trolley life. Motorized trolley wheels are heat treated for added durability, with bronze and stainless steel wheels optional.
• TROLLEY DESIGN - 4-wheel design negotiates 48” minimum radius curve, including patented track applications (60” for JLCET 2-Ton only). Specify track type and beam size.
• LIFETIME WARRANTY |
 | Yale RS2 Ratchet Lever Hoist
Capacities: 3/4 to 3 Ton
Thousands of uses throughout all types of industries: maintenance, ship building, construction, steel fabrication, utility work, mining, petrochemical, etc. Ideal for moving or spotting heavy machinery, pulling utility lines taut, stretching cables or fencing. Holds steel structural members in place for welding. Simplifies setting pipes, meters, etc. in manholes and trenches.
•Easy one-hand operation.
•Lever pull range is 45 to 62 pounds to lift full load.
•Handle that rotates 360 degrees, making it easy to operate in any position and in small spaces.
•Tough yet lightweight aluminum construction and powder coat finish.
•Hoistaloy hardened steel load chain for strength, long wear life and flexibility.
•Free chaining for fast, easy attachment to load.
•Forged upper and lower hooks with latches.
•Double pawl for precise load spotting
•Simple construction with fewer parts for ease of maintenance.
•Optional Load Limiter device protects against overload.
•Lifetime warranty.
•Made in U.S.A. |
| CM Lodestar Electric Chain Hoist for Series 635
The balanced, integrated, proven design of the Lodestar has made it the most popular electric chain hoist in the industry. Lodestar gives you more value for your money including:
• Quick change voltage board-change from low voltage to high voltage by simply repositioning receptacle
• Up to 3 ton capacities for heavy-duty industrial applications
• Gear train lifetime lubricated with non-oxidizing grease
• Precision machined and hardened liftwheel with hardened chain guides for precise chain liftwheel fit
• Gearing designed for exceptionally long life and quiet operation
• H4 duty standard
• Rugged control station (NEMA 4X)
• Hoist duty motor, standard Protector overload device and standard screw type limit switches
• Hardened, forged steel, latch type hooks and Hoistaloy load chain for long, dependable service
• Easy to install and maintain
• No special tools required to disassemble
• Lifetime warranty
• Each hoist thoroughly inspected and tested to over 125% of rated load prior to shipment
• Meets ASME B30.16
• Metric rated
• Made in U.S.A.
Special applications
• Harsh environment hoists available for severe duty of plating, galvanizing and washdown applications
• Hoists with climbing capability available for temporary rigging or lifting applications — must be used in inverted position only
• Hoists with creep control allow precise positioning through field adjustment within the time delay range of .05 sec. to 3 sec.
• Articulating suspension 3 ton only |
| CM Powerstar Electric Chain Hoist with Plain or Geared Trolley
Designed specifically as an alternative to wire rope hoists for high speed lifting of loads from 2 to 20 tons in a space saving chain hoist.
• H-4 or better rated duty cycle
• Designed for heavy-duty industrial applications from 2 to 20 ton capacities
• Liftwheel has machined chain pockets and is heat treated alloy steel for maximum strength and wear resistance
• Efficient regenerative braking system avoids heat generation in power train
• Motors up to 7 1/2 h.p. provide a wide range of lifting speeds
• Single or two speed controls. Two speed models operate on 3:1 speed ratio
• Standard adjustable upper and lower screw limit switches
• Standard overload Protector device
• Hoistaloy load chain can be easily inspected for wear and abuse
• True vertical lift
• Factory tested to 125% of rated capacity prior to shipment
• Metric rated except for 10 & 20 ton capacities
• Rugged aluminum alloy hoist frame
• Chain guide surrounds liftwheel
• Machined and hardened steel Helical gears used throughout hoist for optimum performance and mechanical efficiency.
• Extensive use of life-lubricated bearings plus sealed oil bath power train reservoir for minimum maintenance.
• Dual braking system
• Heavy duty, industrial single speed controls include magnetic reversing contactor which operates on 115 volts provided by a control transformer.
• Totally enclosed, ball bearing, 30 minute rated, thermally protected, hoist duty motor is standard.
• Push button control is weatherproof
(NEMA 4 rated).
• Drop of push button control is 4 ft. above hook at lowest position, unless otherwise specified.
• External push button chain strain relief is standard.
• Power cord length is 2 1/2 ft. unless otherwise specified.
• Trolley design permits easy adjustment for installation on a broad range of beam flange widths.
• Trolley wheels have double row, tapered roller bearings plus machined and hardened universal treads to permit operation on American Standard or flat flanged sections interchangeably.
• Spur gearing used in all motorized trolleys for improved efficiency and durability.
• Drop of hand chain on geared trolleys is 2 ft. above hook at lowest position, unless otherwise specified.
• Designed to be maintained “on the beam.”
• Up to 600 lineal feet of chain
• Weatherproof (NEMA3R)
• Lifetime warranty
• Made in U.S.A. |
| CM Powerstar Electric Chain Hoist with Motor Driven Trolley
Designed specifically as an alternative to wire rope hoists for high speed lifting of loads from 2 to 20 tons in a space saving chain hoist.
• H-4 or better rated duty cycle
• Designed for heavy-duty industrial applications from 2 to 20 ton capacities
• Liftwheel has machined chain pockets and is heat treated alloy steel for maximum strength and wear resistance
• Efficient regenerative braking system avoids heat generation in power train
• Motors up to 7 1/2 h.p. provide a wide range of lifting speeds
• Single or two speed controls. Two speed models operate on 3:1 speed ratio
• Standard adjustable upper and lower screw limit switches
• Standard overload Protector device
• Hoistaloy load chain can be easily inspected for wear and abuse
• True vertical lift
• Factory tested to 125% of rated capacity prior to shipment
• Metric rated except for 10 & 20 ton capacities
• Rugged aluminum alloy hoist frame
• Chain guide surrounds liftwheel
• Machined and hardened steel Helical gears used throughout hoist for optimum performance and mechanical efficiency.
• Extensive use of life-lubricated bearings plus sealed oil bath power train reservoir for minimum maintenance.
• Dual braking system
• Heavy duty, industrial single speed controls include magnetic reversing contactor which operates on 115 volts provided by a control transformer.
• Totally enclosed, ball bearing, 30 minute rated, thermally protected, hoist duty motor is standard.
• Push button control is weatherproof
(NEMA 4 rated).
• Drop of push button control is 4 ft. above hook at lowest position, unless otherwise specified.
• External push button chain strain relief is standard.
• Power cord length is 2 1/2 ft. unless otherwise specified.
• Trolley design permits easy adjustment for installation on a broad range of beam flange widths.
• Trolley wheels have double row, tapered roller bearings plus machined and hardened universal treads to permit operation on American Standard or flat flanged sections interchangeably.
• Spur gearing used in all motorized trolleys for improved efficiency and durability.
• Drop of hand chain on geared trolleys is 2 ft. above hook at lowest position, unless otherwise specified.
• Designed to be maintained “on the beam.”
• Up to 600 lineal feet of chain
• Weatherproof (NEMA3R)
• Lifetime warranty
• Made in U.S.A. |
|
Tell your suppliers you found them on ThomasNet
