Hoists: Electric related categories
 | Chester Hoist Electric Chain Hoists
Chester Electric Low Headroom Chain Hoists are designed for those applications where headroom is limited. Engineered around proven designs, these hoists provide smooth, quiet trouble free operation in a variety of Class III applications. The units are equipped with worm drive gear reducers, case hardened load chain and are available in capacities from 1 through 25 tons. Choices of lug mounted, push/pull, hand geared or motorized trolley drives are available to meet a variety of applications.
Standard features include 5 or 6 pocket load wheels, durable self-locking worm drive transmissions, sturdy steel construction, direct acting motor brakes and two precision bearings per trolley wheel. Standard controls include reversing contactors, 115V control transformers and terminal blocks in a Nema 12 enclosure. Standard units are supplied with redundant paddle type and geared limit switches for both upper and lower hook travel. Standard voltage is 230/460 Volt, 3 phase. Each unit is custom built for the specific beam specified on the order.
This hoist design permits adaptation to a variety of applications and can be custom built to meet the end user′s specific needs. Units can be supplied to fit a variety of beams including I-beams, wide flange beams and patented track. Special control enclosures and motors can be provided for hostile or hazardous environments including explosion proof applications. Trolley options include, push/pull, hand geared or a variety of motorized speeds. Push button pendants and control circuits can be designed to meet the exact requirements of the customer. Common control circuit options include, nonstandard voltages, fuses, TOLs, current load limiters, trolley soft starts, two speed or variable speed operation, inching circuits, encoders and additional limit switches for hoist and trolley travel. Special finishes including plating and corrosion resistant paints are available. Please contact our experts with your specific requirements. |
 | Coffing EC Electric Chain Hoist Hook and Lug Suspension
High performance hoists engineered for heavy duty industrial service. Designed for safety, the
EC incorporates mechanical load brake, motor brake, and overload clutch as standard.
• CAPACITIES & LIFTS - Rated loads from 1/4 to 5 Tons, with 10, 15, and 20-foot standard lifts. Other lifts available. Standard push button drop is 4-feet less than lift.
• VOLTAGE & MOTOR OPTIONS - 115/230, 208 - single phase; 230/460, 208, 220/380, 575 - three phase. 60 hertz standard,50 hertz available. Two-speed motors available (3 to 1 speed ratio).
• SUSPENSION OPTIONS - Rigid or swivel top hook, lug, plain, geared,and motorized trolley available.
• SMALL FRAME DESIGN - Features housings of cast aluminum alloy construction for minimum weight. Engineered and designed for use with motors up to 1 HP.
• LARGE FRAME DESIGN - Features load bearing housings of ductile iron construction for maximum strength. Non-load bearing housings of cast aluminum alloy for minimum weight. Engineered and designed for use with higher torque 2 and 3 HP three phase motors.
• DURABLE CONSTRUCTION - Built in compliance with ASME/ANSI B30.16 and CSA standards.
• ACCESSORIES & OPTIONS - Full line of accessories available, including Variable Frequency Drives.
• LIFETIME WARRANTY
|
 | Coffing JLC Electric Chain Hoist Hook and Lug Suspension
Designed for industrial duty performance. Compact in size, the JLC features a multiple disc motor brake, overload clutch, and chain end stop for safety.
• CAPACITIES & LIFTS - Rated loads from 1/8 to 2 Tons, with 10, 15, and 20-foot standard lifts. Other lifts available. Standard push button drop is 4-feet less than lift. CSA approved.
• VOLTAGES - 115/230 - single phase; 230/460, 208, 380, 415, 575 - three phase, 60 hertz standard, 50 hertz available.
• TWO-SPEED HOIST MODELS - Optional with 3 to 1 speed ratio, three-phase, single voltage only.
• LIMIT SWITCHES - Adjustable to regulate upper and lower load travel. Brass nuts standard for improved repeatability and chain positioning.
• OIL BATH TRANSMISSION - Precision machined alloy steel gears run in oil bath for longer, quieter operation.
• NEMA 3R PUSH BUTTON STATION - Ergonomic design fits operator’s hand for thumb or two-handed operation. 24 Volt Control for operator safety. 115 Volt Control available upon request.
• FRAME - Compact aluminum housing for portability and ease of installation.
• ACCESSORIES - Full line of accessories available, including Variable Frequency Drives.
• CHAIN CONTAINER - Standard on lifts up to 20 ft. single chain / 10 ft. double chain
• LIFETIME WARRANTY |
 | Coffing ED Extended Duty Electric Chain Hoist
For Special Applications
• Capacity 1/2 - 2 Ton
• Standard lift is 10 feet.
• Totally enclosed, fan-cooled motor for extended
operation.
• Highly adaptable for automated plating, heat treating, steel warehouse, foundry, and machine shop use. |
 | Coffing EC Turnover Electric Chain Hoist
For Special Applications
• Capacity 1/4 - 4 Ton
• Standard lift is 15 feet.
• Heavy-duty, specially modified electric chain
hoist with two load hooks.
• Completely inverts virtually any shape load with use of simple slings and successively repositioned load hooks. |
 | Shaw-Box 700 Series Size 2 Single Reeved Hoists with Motor Driven Trolleys
SHAW-BOX 700 Series wire rope hoists are
designed and manufactured for heavy-duty service,
This workhorse is built to deliver, day-in and day-out,
under tough operating conditions. 700 Series
hoists are built to take even the most demanding job
cycles in stride, yet can be relied upon to handle your
most delicate loads with precision control.
Their compact design, with
high hook lift and closer end
approaches, maximizes hook
coverage within an existing
facility, reducing or eliminating
the need for costly rebuilding or
remodeling. 700 Series.hoists
achieve an unusually high hook
lift, without resorting to design compromises.
This line offers the greatest range of lifting
speeds, controls, headroom and mounting options of any
hoists on the market today. 700 Series hoists are available
in both electric and air powered models. Options include
standard and low headroom, deck and base mounted
models, with a choice of single reeving or true vertical lift.
The lug is integral with the all-steel, one-piece welded frame, and is designed for stationary mounting from an
overheads tructure or with any of our trolley options. |
| Shaw-Box 700 Series Size 2 Deck Mounted, Standard Headroom Single Reeved
SHAW-BOX 700 Series wire rope hoists are
designed and manufactured for heavy-duty service,
This workhorse is built to deliver, day-in and day-out,
under tough operating conditions. 700 Series
hoists are built to take even the most demanding job
cycles in stride, yet can be relied upon to handle your
most delicate loads with precision control.
Their compact design, with
high hook lift and closer end
approaches, maximizes hook
coverage within an existing
facility, reducing or eliminating
the need for costly rebuilding or
remodeling. 700 Series.hoists
achieve an unusually high hook
lift, without resorting to design compromises.
This line offers the greatest range of lifting
speeds, controls, headroom and mounting options of any
hoists on the market today. 700 Series hoists are available
in both electric and air powered models. Options include
standard and low headroom, deck and base mounted
models, with a choice of single reeving or true vertical lift.
The lug is integral with the all-steel, one-piece welded frame, and is designed for stationary mounting from an
overheads tructure or with any of our trolley options. |
 | Shaw-Box 800 Series Air Hoists
SHAW-BOX Series 800 Wire Rope Air Hoists use the same mechanical parts as the Wire Rope Electric Hoists. The electric motor, controls and push button of the electric hoist are replaced by an air motor, control valve and pendant control assembly for the air hoist. A motor brake is also available as an option.
• Powerful 8 blade crane type vane air motor is especially desinged for high torque operation.
• Pendant throttle control. Two lever handle meters the air for precise variable speed control. Pendant handle and 3 hose assembly supported by steel strain relief cable.
• Block operated upper limit switch standard. Two position geared limit switch available as an option.
• Three reduction helical and spur gearing, precision cut and heat treated.
• Lubrication is oil splash type in sealed gear case.
• Weston type mechanical load brake holds the load and provides controlled lowering.
• Anti-friction bearings throughout.
• Deep grooved, large diameter rope drum which stores rated lift of hoist without overwrap.
• Shrouded lower block with full swiveling forged steel hook with hook latch.
• Air mufflers standard.
• Spark-Resistant feature is an available option.
|
 | CM Lodestar Electric Chain Hoist
The balanced, integrated, proven design of the Lodestar has made it the most popular electric chain hoist in the industry. Lodestar gives you more value for your money including:
• Quick change voltage board-change from low voltage to high voltage by simply repositioning receptacle
• Up to 3 ton capacities for heavy-duty industrial applications
• Gear train lifetime lubricated with non-oxidizing grease
• Precision machined and hardened liftwheel with hardened chain guides for precise chain liftwheel fit
• Gearing designed for exceptionally long life and quiet operation
• H4 duty standard
• Rugged control station (NEMA 4X)
• Hoist duty motor, standard Protector overload device and standard screw type limit switches
• Hardened, forged steel, latch type hooks and Hoistaloy load chain for long, dependable service
• Easy to install and maintain
• No special tools required to disassemble
• Lifetime warranty
• Each hoist thoroughly inspected and tested to over 125% of rated load prior to shipment
• Meets ASME B30.16
• Metric rated
• Made in U.S.A.
Special applications
• Harsh environment hoists available for severe duty of plating, galvanizing and washdown applications
• Hoists with climbing capability available for temporary rigging or lifting applications — must be used in inverted position only
• Hoists with creep control allow precise positioning through field adjustment within the time delay range of .05 sec. to 3 sec.
• Articulating suspension 3 ton only |
 | CM Lodestar XL Electric Chain Hoist
Columbus McKinnon introduces an expanded
line of Lodestar XL electric chain hoists for lifting applications from 2 to 71⁄2 tons. The new offering provides heavy-duty hoists featuring faster speeds, less reeving, and higher capacities than traditional chain hoists. Workers in automotive plants, heavy equipment manufacturing, paper mills, and related rugged work environments will experience the same dependability and versatility that they have relied on for many years.
The NEW features of the Lodestar XL Electric
Chain Hoist include:
• Lifting capacities up to 7 1⁄2 tons
• Increased lifting speeds throughout the line
• Double reeved units with 3-5 ton lifting capacities
• Maximum lifting speed of 30 feet per minute
A glimpse of the many features of the Lodestar XL that have honed its reputation for durability and long life:
• Heavy-duty, multiple disc braking system
• Forged ten-pocket oblique-lay liftwheel for smooth chain operation, constant chain speed, and reduced chain wear
• Gearing operated in oil bath for increased lifting life and quiet operation
• Rated H-4, heavy-duty
• Standard overload protector
• Screw-type limit switches
• Thermally protected motor
• Factory tested at 125% of rated capacity
• Made in U.S.A. |
 | CM Shopstar Electric Chain Hoist
The ShopStar electric chain hoist features rugged construction and high H4 duty cycle. It keeps lifting and lifting, up to 1,000 pounds and 300 motor starts per hour. Additional features and benefits include:
• H4 duty cycle (300 motor starts/hour)
• Easy installation and maintenance
• Standard protector overload device
• 10 pocket oblique lay liftwheel provides longer chain wear
• Epoxy powder coat finish
• 61⁄2 ft. power cord with molded 3 prong plug on 115 volt units
• NEMA 4 industrial rated control station
• Optional impact-resistant chain container available
• Gear train lifetime lubricated with non-oxidizing grease
• CM Hoist Alloy Load Chain (zinc plated optional)
• Thermally protected hoist duty motor
• Dual braking system — D.C. plus regenerative
• Rugged cast aluminum alloy hoist frame
• 5:1 design factor
• Small, compact design for commercial & industrial applications
• Rigid hook suspension prevents tangling of power cord
• Hardened forged steel latch style lower hook rotates 360°
• Totally enclosed non-ventilated
hoist frame protects motor from environmental contamination
• True vertical lift
• Precision bearings used throughout hoist
• Lifetime warranty
• Made in U.S.A. |
 | CM Valustar Electric Chain Hoist
Designed specifically for general commercial applications.
This compact, lightweight hoist features:
• Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear
• Standard lift 10, 15 & 20 ft.
• 5 ft. power cord length
• Heavy-duty caliper type AC brake
• Rugged NEMA 4 control station, 115 volt control circuit
• Easy to install and maintain
• Hoistaloy load chain for smooth operation and maximum chain life
• Efficient regenerative braking system to avoid heat generation in power train
• Enclosed hoist duty motor
• Gear train lifetime lubricated with non-oxidizing grease
• Latch type hooks
• Hook suspension standard
• Fully machined and heat treated gear train
• Standard overload Protector device
• H3 duty-1 phase; H-4 duty-3 phase
• One-year warranty
• Metric rated
• Made in U.S.A. |
 | CM Powerstar Electric Chain Hoist
Designed specifically as an alternative to wire rope hoists for high speed lifting of loads from 2 to 20 tons in a space saving chain hoist.
• H-4 or better rated duty cycle
• Designed for heavy-duty industrial applications from 2 to 20 ton capacities
• Liftwheel has machined chain pockets and is heat treated alloy steel for maximum strength and wear resistance
• Efficient regenerative braking system avoids heat generation in power train
• Motors up to 7 1/2 h.p. provide a wide range of lifting speeds
• Single or two speed controls. Two speed models operate on 3:1 speed ratio
• Standard adjustable upper and lower screw limit switches
• Standard overload Protector device
• Hoistaloy load chain can be easily inspected for wear and abuse
• True vertical lift
• Factory tested to 125% of rated capacity prior to shipment
• Metric rated except for 10 & 20 ton capacities
• Rugged aluminum alloy hoist frame
• Chain guide surrounds liftwheel
• Machined and hardened steel Helical gears used throughout hoist for optimum performance and mechanical efficiency.
• Extensive use of life-lubricated bearings plus sealed oil bath power train reservoir for minimum maintenance.
• Dual braking system
• Heavy duty, industrial single speed controls include magnetic reversing contactor which operates on 115 volts provided by a control transformer.
• Totally enclosed, ball bearing, 30 minute rated, thermally protected, hoist duty motor is standard.
• Push button control is weatherproof
(NEMA 4 rated).
• Drop of push button control is 4 ft. above hook at lowest position, unless otherwise specified.
• External push button chain strain relief is standard.
• Power cord length is 2 1/2 ft. unless otherwise specified.
• Trolley design permits easy adjustment for installation on a broad range of beam flange widths.
• Trolley wheels have double row, tapered roller bearings plus machined and hardened universal treads to permit operation on American Standard or flat flanged sections interchangeably.
• Spur gearing used in all motorized trolleys for improved efficiency and durability.
• Drop of hand chain on geared trolleys is 2 ft. above hook at lowest position, unless otherwise specified.
• Designed to be maintained “on the beam.”
• Up to 600 lineal feet of chain
• Weatherproof (NEMA3R)
• Lifetime warranty
• Made in U.S.A. |
 | Yale Y80 Series Electric Monorail Wire Rope Hoists
Yale Y80 Series hoists are available in two basic models: single reeved and true vertical lift, with either air or electric power.
The heavy-duty wire rope and drum-type hoist line has a steelmounting lug integral with the one-piece welded frame, and is designed for stationary mounting from an overhead structure, or with any of our monorail trolley options. Standard features of this rugged hoist line include a heavy welded steel frame, powerful drive motor, totally enclosed oil-bath lubricated drive train, and dual brake reliability.
Yale® Y80 Series wire rope hoists are ideally suited for virtually any lifting application of up to five tons. Their modular design and versatility provide a wide range of capacities, lifts, hoisting speeds, and control options, making it possible to select the most efficient hoist for the job without wasted capacity or overkill.
The compact design and closer end approaches of the standard
Y80 Series hoist allows an unusually high hook lift, as compared to
many so-called low headroom hoists, without resorting to design
compromises. Y80 Series hoists maximize hook coverage within an
existing facility, reducing or eliminating the need for costly
rebuilding or remodeling. |
 | Little Mule FLC Electric Chain Hoists
Industrial Duty — Market’s Best for Performance & Value • 1/4 - 2 Ton
Versatile Operation
• Rated loads from 1/4 to 2 Ton Metric Rated.
Standard lifts of 10, 15 and 20 feet. Other lifts
available. CSA approved.
• Voltages — 115/230 - single phase; 230/460, 208, 575 - three phase, 60 Hertz Standard, 50 Hertz available.
• IEC style controls meet or exceed electrical codes.
• H4 Duty Rating — Handles heavy duty work
environments
• Made in U.S.A.
Special Model Features
• Five -Pocket Load Sheave increases chain and sheave engagement 25% over hoists with conventional load sheaves. Provides smoother lifting and reduces chain wear.
• Adjustable limit switches regulate upper and lower load travel. Brass nuts standard for improved repeatability and chain positioning.
• Mechanical Overload Protection Device — Helps protect hoist, operator, and supporting structures form damaging overloads, chain jamming and reverse phasing.
• Multiple Disc Motor Brake — Heavy duty design for reliable operation. Direct acting for positive load holding and spotting.
• Molded quick connect standard chain container prevents slack chain from interfering with operator. 20 Ft. lift single reeved, 10Ft. lift double reeved.
• One Chain Size — All models reduce inventory.
• Top Suspension — Quick-change from hook mount
to lug mount.
• Weather Resistant — Hoist is NEMA 3R enclosure. |
| Coffing EC Electric Chain Hoist Trolley Suspension
COFFING ECT, ECGT, and ECMT Models - Plain, geared
and motorized trolley suspensions with all the features of basic EC models for added flexibility in a variety of applications.
• PLAIN TROLLEY - For manual positioning of hoist and load.
• GEARED TROLLEY - For more precise positioning of hoist and load. Standard hand chain drop is 2-feet less than lift.
• MOTORIZED TROLLEY - For faster positioning of hoist and load over longer distances. 35 or 75 FPM speeds standard with optional speeds of 18, 24, 50, 100, and 150 FPM.
• VOLTAGES - 115/230, 208 - single phase; 230/460, 208, 220/380, 575 - three phase. 60 hertz standard, 50 hertz available.
• TWO-SPEED MOTORIZED TROLLEY MODELS - Optional with 3 to 1 speed ratio, three-phase, single voltage only.
• WRAP-AROUND SIDE PLATES - Act as safety lugs and as bumpers to protect wheels. Available to fit American Standard I-Beams, wideflange,
and patented track beams. Specify track type and beam size.
• PRECISION TROLLEY WHEELS - Machined, cast iron wheels with sealed, lifetime lubricated ball bearings for extended trolley life.Motorized trolley wheels heat treated for added durability. Bronzeand stainless steel wheels optional.
• TWO TROLLEY DESIGNS - 4-wheel design on 1/4 - 3 ton negotiates 48” minimum radius curve, including patented track applications. 8-wheel design on 4 and 5 ton reduces beam flange stress.
• ACCESSORIES & OPTIONS - Full line available to meet a variety of applications.
• LIFETIME WARRANTY |
| Coffing JLC Electric Chain Hoist Trolley Suspensions
Plain and motorized trolley suspensions with all the features of the basic JLC models for added flexibility in a variety of applications.
• PLAIN TROLLEY - For manual positioning of hoist and load.
• MOTORIZED TROLLEY - For faster positioning of hoist and load over longer distances. 35 or 75 FPM speeds standard - other speeds available. Trolley brake optional.
• VOLTAGES - 115/230 - single phase; 230/460, 208, 380, 415, 575 - three phase, 60 hertz standard, 50 hertz available.
• TWO-SPEED MOTORIZED TROLLEY MODELS - Optional with 3 to 1 speed ratio, three-phase, single voltage only.
• WRAP-AROUND SIDE PLATES - Act as safety lugs and as bumpers to protect wheels. Available to fit American Standard I-Beams, wideflange, and patented track beams.
• PRECISION TROLLEY WHEELS - Machined, cast iron wheels with sealed, lifetime lubricated ball bearings for extended trolley life. Motorized trolley wheels are heat treated for added durability, with bronze and stainless steel wheels optional.
• TROLLEY DESIGN - 4-wheel design negotiates 48” minimum radius curve, including patented track applications (60” for JLCET 2-Ton only). Specify track type and beam size.
• LIFETIME WARRANTY |
 | Shaw-Box World Series Monorail Hoists & Trolleys
Shaw-Box World Series monorail wire rope hoists are built for the world market and combine over 130 years of experience with the latest in manufacturing and materials technology, rigid design standards and the best quality components available to create a feature-filled, rugged, easily maintained hoist line.
All Shaw-Box World Series hoists are metric capacity rated, low headroom, heavy-duty, built to meet and exceed either FEM 2m or 3m duty (similar to ASME H4 or H4+ duty) providing long life in heavy applications with the higher lifting speeds and precise positioning control demanded by industry worldwide. |
 | Shaw-Box World Series Top Running Trolley Hoists
The Shaw-Box World Series wire rope hoist was created for the world market and
combines over 130 years of experience with the latest in manufacturing and materials
technology, rigid design standards and the best quality components available to create
a feature-filled, rugged, easily maintained hoist.
The World-Series hoist is metric capacity rated, low headroom, heavy-duty, built to meet
and exceed either FEM 2m or 3m duty (similar to ASME H4 or H4+ duty) providing
long life in heavy applications with the higher lifting speeds and precise positioning
control demanded by industry worldwide.
|
| Shaw-Box 700 Series Size 2 Double Reeved Hoists with Motor Driven Trolleys
SHAW-BOX 700 Series wire rope hoists are
designed and manufactured for heavy-duty service,
This workhorse is built to deliver, day-in and day-out,
under tough operating conditions. 700 Series
hoists are built to take even the most demanding job
cycles in stride, yet can be relied upon to handle your
most delicate loads with precision control.
Their compact design, with
high hook lift and closer end
approaches, maximizes hook
coverage within an existing
facility, reducing or eliminating
the need for costly rebuilding or
remodeling. 700 Series.hoists
achieve an unusually high hook
lift, without resorting to design compromises.
This line offers the greatest range of lifting
speeds, controls, headroom and mounting options of any
hoists on the market today. 700 Series hoists are available
in both electric and air powered models. Options include
standard and low headroom, deck and base mounted
models, with a choice of single reeving or true vertical lift.
The lug is integral with the all-steel, one-piece welded frame, and is designed for stationary mounting from an
overheads tructure or with any of our trolley options. |
| CM Lodestar Electric Chain Hoist for Series 635
The balanced, integrated, proven design of the Lodestar has made it the most popular electric chain hoist in the industry. Lodestar gives you more value for your money including:
• Quick change voltage board-change from low voltage to high voltage by simply repositioning receptacle
• Up to 3 ton capacities for heavy-duty industrial applications
• Gear train lifetime lubricated with non-oxidizing grease
• Precision machined and hardened liftwheel with hardened chain guides for precise chain liftwheel fit
• Gearing designed for exceptionally long life and quiet operation
• H4 duty standard
• Rugged control station (NEMA 4X)
• Hoist duty motor, standard Protector overload device and standard screw type limit switches
• Hardened, forged steel, latch type hooks and Hoistaloy load chain for long, dependable service
• Easy to install and maintain
• No special tools required to disassemble
• Lifetime warranty
• Each hoist thoroughly inspected and tested to over 125% of rated load prior to shipment
• Meets ASME B30.16
• Metric rated
• Made in U.S.A.
Special applications
• Harsh environment hoists available for severe duty of plating, galvanizing and washdown applications
• Hoists with climbing capability available for temporary rigging or lifting applications — must be used in inverted position only
• Hoists with creep control allow precise positioning through field adjustment within the time delay range of .05 sec. to 3 sec.
• Articulating suspension 3 ton only |
| CM Powerstar Electric Chain Hoist with Plain or Geared Trolley
Designed specifically as an alternative to wire rope hoists for high speed lifting of loads from 2 to 20 tons in a space saving chain hoist.
• H-4 or better rated duty cycle
• Designed for heavy-duty industrial applications from 2 to 20 ton capacities
• Liftwheel has machined chain pockets and is heat treated alloy steel for maximum strength and wear resistance
• Efficient regenerative braking system avoids heat generation in power train
• Motors up to 7 1/2 h.p. provide a wide range of lifting speeds
• Single or two speed controls. Two speed models operate on 3:1 speed ratio
• Standard adjustable upper and lower screw limit switches
• Standard overload Protector device
• Hoistaloy load chain can be easily inspected for wear and abuse
• True vertical lift
• Factory tested to 125% of rated capacity prior to shipment
• Metric rated except for 10 & 20 ton capacities
• Rugged aluminum alloy hoist frame
• Chain guide surrounds liftwheel
• Machined and hardened steel Helical gears used throughout hoist for optimum performance and mechanical efficiency.
• Extensive use of life-lubricated bearings plus sealed oil bath power train reservoir for minimum maintenance.
• Dual braking system
• Heavy duty, industrial single speed controls include magnetic reversing contactor which operates on 115 volts provided by a control transformer.
• Totally enclosed, ball bearing, 30 minute rated, thermally protected, hoist duty motor is standard.
• Push button control is weatherproof
(NEMA 4 rated).
• Drop of push button control is 4 ft. above hook at lowest position, unless otherwise specified.
• External push button chain strain relief is standard.
• Power cord length is 2 1/2 ft. unless otherwise specified.
• Trolley design permits easy adjustment for installation on a broad range of beam flange widths.
• Trolley wheels have double row, tapered roller bearings plus machined and hardened universal treads to permit operation on American Standard or flat flanged sections interchangeably.
• Spur gearing used in all motorized trolleys for improved efficiency and durability.
• Drop of hand chain on geared trolleys is 2 ft. above hook at lowest position, unless otherwise specified.
• Designed to be maintained “on the beam.”
• Up to 600 lineal feet of chain
• Weatherproof (NEMA3R)
• Lifetime warranty
• Made in U.S.A. |
| CM Powerstar Electric Chain Hoist with Motor Driven Trolley
Designed specifically as an alternative to wire rope hoists for high speed lifting of loads from 2 to 20 tons in a space saving chain hoist.
• H-4 or better rated duty cycle
• Designed for heavy-duty industrial applications from 2 to 20 ton capacities
• Liftwheel has machined chain pockets and is heat treated alloy steel for maximum strength and wear resistance
• Efficient regenerative braking system avoids heat generation in power train
• Motors up to 7 1/2 h.p. provide a wide range of lifting speeds
• Single or two speed controls. Two speed models operate on 3:1 speed ratio
• Standard adjustable upper and lower screw limit switches
• Standard overload Protector device
• Hoistaloy load chain can be easily inspected for wear and abuse
• True vertical lift
• Factory tested to 125% of rated capacity prior to shipment
• Metric rated except for 10 & 20 ton capacities
• Rugged aluminum alloy hoist frame
• Chain guide surrounds liftwheel
• Machined and hardened steel Helical gears used throughout hoist for optimum performance and mechanical efficiency.
• Extensive use of life-lubricated bearings plus sealed oil bath power train reservoir for minimum maintenance.
• Dual braking system
• Heavy duty, industrial single speed controls include magnetic reversing contactor which operates on 115 volts provided by a control transformer.
• Totally enclosed, ball bearing, 30 minute rated, thermally protected, hoist duty motor is standard.
• Push button control is weatherproof
(NEMA 4 rated).
• Drop of push button control is 4 ft. above hook at lowest position, unless otherwise specified.
• External push button chain strain relief is standard.
• Power cord length is 2 1/2 ft. unless otherwise specified.
• Trolley design permits easy adjustment for installation on a broad range of beam flange widths.
• Trolley wheels have double row, tapered roller bearings plus machined and hardened universal treads to permit operation on American Standard or flat flanged sections interchangeably.
• Spur gearing used in all motorized trolleys for improved efficiency and durability.
• Drop of hand chain on geared trolleys is 2 ft. above hook at lowest position, unless otherwise specified.
• Designed to be maintained “on the beam.”
• Up to 600 lineal feet of chain
• Weatherproof (NEMA3R)
• Lifetime warranty
• Made in U.S.A. |
|
Tell your suppliers you found them on ThomasNet
