Screws related categories
 | L9® Fastening System- L9® Hex Head Cap Screw
The L9 Fastening System is the strongest off-the-shelf fastening system available. It is a 180,000 psi minimum tensile strength (stress) assembly designed for high stress applications requiring high clamp load.- Alloy steel.
- 20% stronger than SAE grade 8.
- Zinc Yellow dichromate finish.
- Hardness - Rockwell C 38-42.
- L9 bolt + L9 nut + two L9 washers = L9 Fastening System.
|
 | Lake Erie Hex Cap Screw (Non Standard Lengths) - Grade 8 Alloy
- Manufactured exclusively in the USA to SAE J-429 specifications.
- Factory certification on file at Automotive Fasteners.
- All Lake Erie sizes listed, including non-standard sizes, are regular stock items.
- 150,000 psi minimum tensile strength.
- Plain black finish or zinc plated with yellow dichromate finish.
- Available packaged and bulk.
|
 | Lake Erie Hex Cap Screw (Non Standard Lengths) - Grade 5
- Manufactured exclusively in the USA to SAE J-429 specifications.
- Factory certification on file at Automotive Fasteners.
- All Lake Erie sizes listed, including non-standard sizes, are regular stock items.
- Medium carbon - heat treated steel.
- Plain black finish or bright zinc-plated.
- Available packaged and bulk.
|
 | Hex Head Cap Screw - Grade 8 Alloy
- Made in North America to SAE J-429 specifications.
- 150,000 psi minimum tensile strength.
- Plain black finish or zinc plated with yellow dichromate finish.
- Available packaged and bulk.
|
 | Hex Head Cap Screw - Grade 5
- Made in North America to SAE J-429 specifications.
- Medium carbon - heat treated steel.
- Plain black finish or bright zinc plated.
- Available packaged and bulk.
|
 | Countr-bor Screw
- Alloy steel.
- No special tooling required.
- Use standard 12 point socket, same diameter as screw.
- Use standard box-end wrenches.
- Use standard nut running tools.
- 100% traceable.
- Available to 3 inch diameter.
- Class 3A thread fit.
|
 | Carriage Screws
- Available full thread and partial thread at manufacturer′s option.
- Low carbon steel.
- Stock is bright zinc plated; some sizes available plain finish.
- Available packaged and bulk.
|
 | Step Screws
- Low carbon steel.
- Zinc plated finish.
- Additional sizes available.
|
 | Deck Screws
- 18-8 Stainless Steel.
- Square and Phillips recess.
- 8 x 1 5/8 not available in Phillips drive.
- Type 17 point.
|
 | Trim Screw Assortment, No. FP-123
- Assortment of popular sizes.
- Packaged in plastic box
- Tapping screws, phillips oval, washer head
- Chrome plated.
- Pkg. Qty=100.
- P/N2771 - 8 x 5/8
- P/N2751 - 8 x 3/4
- P/N2772 - 8 x 1
- P/N3466 - 10 x 3/4
|
 | Socket Head Cap Screws, 1960 Series
- Alloy steel, heat treated.
- UNRC coarse and UNRF fine thread series.
- Class 3A thread fit standard through 1 inch diameter.
- Class 2A thread fit standard over 1 inch diameter.
- Additional ′′non-standard′′ sizes available on special order.
|
 | Low Head Socket Cap Screws
- Alloy steel, heat treated.
- UNRC, Class 3A thread fit.
- Additional ′′non-standard′′ sizes available on special order.
|
 | Socket Head Shoulder Screws
- Alloy steel, heat treated.
- UNRC, Class 3A thread fit.
- Additional ′′non-standard′′ sizes available on special order.
|
 | Flat Head Socket Cap Screws
- Alloy steel, heat treated.
- UNRC, Class 3A thread fit.
- Additional ′′non-standard′′ sizes available on special order.
|
|
Tell your suppliers you found them on ThomasNet
