CAS can supply all of your nozzle holders, line couplers and washers for all of your blast equipment.  We stock everything from economical aluminum nozzle holders and couplers to high quality nylon Q/D nozzle holders.

• Quick connect: simply push tubing in, no tools required. Saves up to 75% of assembly time of standard compression fittings.
• Quick disconnect: hold two fingers on insert and pull tubing out. No tools required.
• Reusable: connect and disconnect numerous times
• Full flow design provides up to 60% more flow than conventional fittings with internal tube supports.
• Positive seal: no leaks, after tubing is inserted, seal is made. Secure tube retention: pulling on tubing only serves to tighten the connection.
• Pre-applied Teflon® based pipe sealant on all male pipe threads saves customer additional labor.
• Working pressure: fittings are suitable for use up to the maximum working pressure of the plastic tube being used. Also suitable for vacuum service.
• Working temperature: -10ºF to 200ºF

• Quick connect: simply push tubing in, no tools required. Saves up to 75% of assembly time of standard compression fittings.
• Quick disconnect: hold two fingers on insert and pull tubing out. No tools required.
• Reusable: connect and disconnect numerous times
• Full flow design provides up to 60% more flow than conventional fittings with internal tube supports.
• Positive seal: no leaks, after tubing is inserted, seal is made. Secure tube retention: pulling on tubing only serves to tighten the connection.
• Pre-applied Teflon® based pipe sealant on all male pipe threads saves customer additional labor.
• Working pressure: fittings are suitable for use up to the maximum working pressure of the plastic tube being used. Also suitable for vacuum service.
• Working temperature: -10ºF to 200ºF

Suitable for many industries such as: chemical, food, packaging, and medical.

• Working temperature: -4ºF to 250ºF
• Working pressure: 290 PSI max
• No silicone

Compatible with a range of tubes:

• semi-rigid nylon tube
• flexible polyurethane tube
• low density polyethylene
• Teflon® tube FEP 140
• stainless steel and copper tube (when grooved)

Materials of Construction:

• body - AISI 316 stainless Steel
• backup washer - 304L stainless steel
• collet - 303L stainless steel
• seal - Viton® O-ring
• Thread sealant does not come pre-applied on these products, allowing the appropriate sealant for the application to be applied by the user

Suitable for many industries such as: chemical, food, packaging, and medical.

• Working temperature: -4ºF to 250ºF
• Working pressure: 290 PSI max
• No silicone

Compatible with a range of tubes:

• semi-rigid nylon tube
• flexible polyurethane tube
• low density polyethylene
• Teflon® tube FEP 140
• stainless steel and copper tube (when grooved)

Materials of Construction:

• body - AISI 316 stainless Steel
• backup washer - 304L stainless steel
• collet - 303L stainless steel
• seal - Viton® O-ring
• Thread sealant does not come pre-applied on these products, allowing the appropriate sealant for the application to be applied by the user

Technical characteristics and construction materials:

• brass body with external and internal nickel plating
• chemical (electroless) nickel plated
• working temperature: 5º F to 180º F
• seal: Buna-N
• pressure: vacuum to 290 PSI (Maximum circuit pressure depends equally on the type and diameter of the tube used
• thread: length of threads in accordance with ISO 7.1 standards
• pre-applied thread sealant on all NPT threads
• no silicone

Features and Benefits:

• nickel-plated brass push-to-connect fitting
• A solution for pneumatic applications and fluids in aggressive environments where stainless steel is not necessary

Applications:

• various fluids: compressed air and fluids compatible with materials of construction
• typical industries: automotive, packaging, paper mills, wood working, factories with wash-down processes
• tube compatibility: urethane, nylon, polyethylene, Teflon®, metallic tubes (stainless steel and copper when grooved)

Technical characteristics and construction materials:

• brass body with external and internal nickel plating
• chemical (electroless) nickel plated
• working temperature: 5º F to 180º F
• seal: Buna-N
• pressure: vacuum to 290 PSI (Maximum circuit pressure depends equally on the type and diameter of the tube used
• thread: length of threads in accordance with ISO 7.1 standards
• pre-applied thread sealant on all NPT threads
• no silicone

Features and Benefits:

• nickel-plated brass push-to-connect fitting
• A solution for pneumatic applications and fluids in aggressive environments where stainless steel is not necessary

Applications:

• various fluids: compressed air and fluids compatible with materials of construction
• typical industries: automotive, packaging, paper mills, wood working, factories with wash-down processes
• tube compatibility: urethane, nylon, polyethylene, Teflon®, metallic tubes (stainless steel and copper when grooved)

Specs:

• materials: nickel-plated brass construction: black body is glass filled nylon; Buna-N O-ring seal; polypropylene release button; silicone free
• positive seal: sealing and holding is accomplished instantaneously
• reusable: connect and disconnect numerous times
• full-flow: fitting seals on outside diameter of tubing
• working pressure: fittings rated to 290 PSI at ambient temperature. Maximum circuit pressure depends equally on the type and diameter of the tube used
• working temperature: -4ºF to 175ºF
• pre-applied thread sealant on all male pipe threads
• compatible tubing: semi-rigid nylon, polyurethane and polyethylene tube
• vacuum capability: vacuum of 28′′ Hg (99% vacuum)

Specs:

• materials: nickel-plated brass construction: black body is glass filled nylon; Buna-N O-ring seal; polypropylene release button; silicone free
• positive seal: sealing and holding is accomplished instantaneously
• reusable: connect and disconnect numerous times
• full-flow: fitting seals on outside diameter of tubing
• working pressure: fittings rated to 290 PSI at ambient temperature. Maximum circuit pressure depends equally on the type and diameter of the tube used
• working temperature: -4ºF to 175ºF
• pre-applied thread sealant on all male pipe threads
• compatible tubing: semi-rigid nylon, polyurethane and polyethylene tube
• vacuum capability: vacuum of 28′′ Hg (99% vacuum)

Specs:

• materials: nickel-plated brass construction: black body is glass filled nylon; Buna-N O-ring seal; polypropylene release button; silicone free
• positive seal: sealing and holding is accomplished instantaneously
• reusable: connect and disconnect numerous times
• full-flow: fitting seals on outside diameter of tubing
• working pressure: fittings rated to 290 PSI at ambient temperature. Maximum circuit pressure depends equally on the type and diameter of the tube used
• working temperature: -4ºF to 175ºF
• pre-applied thread sealant on all male pipe threads
• compatible tubing: semi-rigid nylon, polyurethane and polyethylene tube
• vacuum capability: vacuum of 28′′ Hg (99% vacuum)

Specs:

• materials: nickel-plated brass construction: black body is glass filled nylon; Buna-N O-ring seal; polypropylene release button; silicone free
• positive seal: sealing and holding is accomplished instantaneously
• reusable: connect and disconnect numerous times
• full-flow: fitting seals on outside diameter of tubing
• working pressure: fittings rated to 290 PSI at ambient temperature. Maximum circuit pressure depends equally on the type and diameter of the tube used
• working temperature: -4ºF to 175ºF
• pre-applied thread sealant on all male pipe threads
• compatible tubing: semi-rigid nylon, polyurethane and polyethylene tube
• vacuum capability: vacuum of 28′′ Hg (99% vacuum)

Specs:

• materials: nickel-plated brass construction: black body is glass filled nylon; Buna-N O-ring seal; polypropylene release button; silicone free
• positive seal: sealing and holding is accomplished instantaneously
• reusable: connect and disconnect numerous times
• full-flow: fitting seals on outside diameter of tubing
• working pressure: fittings rated to 290 PSI at ambient temperature. Maximum circuit pressure depends equally on the type and diameter of the tube used
• working temperature: -4ºF to 175ºF
• pre-applied thread sealant on all male pipe threads
• compatible tubing: semi-rigid nylon, polyurethane and polyethylene tube
• vacuum capability: vacuum of 28′′ Hg (99% vacuum)