Tapes: Pressure Sensitive related categories
 | 189 Grit Safety Tape
Description: Grit Safety Tape is a mineral-coated plastic film, one side pressure sensitive adhesive, protected by removable liner. Applications: Recommended surface application temperature is 50°F and above. Grit Safety Tape may be applied to clean, dry and lubrication-free surfaces. All information and testing are based on our best experience and knowledge and does not constitute a warranty of products sold. All Nadco materials are sold with the understanding that the users will independently determine suitability of the end use of our products. We recommend customers test bondability immediately upon lamination or after aging, either accelerated or after a period of time. |
 | 189Y-B Yellow and Black Stripe Anti-Slip Grit Tape
Description:
189Y/B is a mineral-coated film, one side pressure sensitive, protected by removable liner. Applications:
Recommended surface application temperature is 50°F and above. 189Y/B may be applied to clean, dry and lubrication free surfaces. Service temperature of 40°F - 200°F. All information and testing are based on our best experience and knowledge and does not constitute a warranty of products sold. All material are sold with the understanding that the users independently determine suitability of the end use of our products. We recommend customers test bond ability immediately upon lamination or after aging, either accelerated or after a period of time. |
 | 526 Blue - High Performance Splicing Tape
Description: A thin, strong, conformable, non-woven tissue coated on both sides with an extremely aggressive high performance acrylic pressure sensitive adhesive system. Other outstanding feature are high tack, high adhesion, high shear strength and excellent low and elevated temperature performance. Applications: Repulpable splicing applications. A high performance splicing tape used in the manufacture of paper, plastics, and other continuous web processes. Especially suitable in the manufacture of news print. Thickness conformability is excellent for most irregular and mismatched surfaces. |
 | 549 High Temperature Masking Tape
Description: A smooth crepe pressure-sensitive masking tape with good quick stick and holding properties. This product is designed for paint making requiring clean and easy removal from a variety of surfaces. Resists paint flaking. Can be exposed to oven temperatures up to 300°F (148°C) for 30 minutes Applications: Automotive, truck, bus and marine paint masking. Recommended hot to warm removal, although can be removed cold. |
 | 1520CW Aluminum Foil Tape
Description: A 2 mil, (50 micron) high strength aluminum foil coated with an aggressive high temperature acrylic adhesive system. The foil conforms well to both fibrous and sheet metal ducts, providing an excellent vapor seal. The malleable foil also conforms well around corners and to irregular surfaces. Coated with a special cold weather acrylic pressure sensitive adhesive system which combines superior quick stick at normal temperatures with superior low temperature performance below freezing - this is the ultimate in cold weather tapes. Recommended for use at normal and elevated temperatures also. Applications: Primarily used for vapor sealing fiberglass ductboard and sheet metal ducts; can also be used on FSK systems. Conforms to British Standard BS 476: Part 7, Class 1: Part 6, Class 0. U.S. Coast Guard approved for interior finish: Certificate of Approval No. 164.012/120/0 U.L. FILE NO.: R10984 Underwriters Laboratories Registered Trademark
Flame Spread: 5
Smoke Developed: 10 |
| 1688 Aluminum Foil Shielding Tape
Description: This product consists of a 2 mil (50 micron), premium dead soft, high strength aluminum foil coated with a specially formulated conductive pressure sensitive acrylic adhesive system. Superior adhesion, malleability and adhesive conductivity allow for extremely low resistance and make this an excellent shielding tape. Applications: Designed to meet a wide variety of EMI and RFI shielding applications in the electronics industry. Also for use in printed circuit manufacture and repair. Foil accepts solder easily. |
| 1697 Copper Foil Shielding Tape
Description: A 1.4 mil (36 micron) premium dead soft, zero temper, high tensile copper foil coated with and an aggressive, conductive acrylic pressure sensitive adhesive. Superior adhesion, malleability and adhesive conductivity allow for extremely low resistance and make this an excellent shielding tape. Applications: Designed to meet a wide variety of EMI/RFI shielding applications in the electronics industry. Also for use in printed circuit manufacture and repair. Foil accepts solder easily and does not oxidize. The physical properties listed are typical test results obtained from a series of laboratory tests and should not be used for the purpose of writing specifications. Before using the product, user shall determine the suitability of the product for his/her use: and user assumes all risks and liabilities in connection therewith. All test procedures used are in accordance with ASTM, PSTC and Mil Standard methods. |
 | 3420 Glo Brite Safety Track Tape
Description: In emergency situations, there is always the possibility of panic and the risk of serious injury due to slips and falls. Glo Brite Safety Track is non-skid, mineral-coated photoluminescent tape that provides unsurpassed, non-slip protection on hazardous surfaces. Because Glo Brite Safety Track absorbs and stores energy from ambient light, it is instantly visible in event of darkness. Glo Brite Safety Track easily adheres to most surfaces, making it ideal for stairs and other potentially slick surfaces that are part of your low-level emergency egress system. easily adheres to most surfaces, making it ideal for stairs and other potentially slick surfaces that are part or your low-level emergency egress system. Features: ReliabilityNon-toxic, non-radioactivePerfect for low-level emergency egress systemsAbrasive grain provides consistent co-efficient of frictionLow Profile construction helps prevent edge curlLow-cost, easy installation, peel and stickInstalls over most irregular surfacesExceeds OSHA standards for non-slip protection |
| 3802 Double Coated Polyester Tape
Description: A 2 mil (50 micron) glass reinforced transfer tape with an aggressive acrylic pressure sensitive transfer adhesive and excellent oxidation and ultraviolet light resistance. Designed for both interior and exterior applications. This transfer film has good quick stick and high shear properties, and wets out to metals, high surface energy plastics, most elastomers and treated olefins and coated and plain papers. Applications: A high performance splicing tape designed for flying splices of lightweight papers to heavy weight board. Excellent temperature resistance. For use with nameplates, decals, aluminum, polyester, vinyls, polycarbonates, and papers. The initial quick stick allows for easy liner removal in paper splicing applications. Also, miscellaneous bonding, holding, laminating and mounting. |
| 4150 Industrial Tape
4150 is a double coated tissue tape coated on both sides with an extremely aggressive rubber pressure sensitive adhesive (PSA). A versatile, cost effective industrial tape, 4150 has excellent quick stick and peel adhesion properties for permanent bonding applications on foams, plastics, metals, and composite materials subjected to a broad range of environmental conditions. |
 | 7550 Glo Brite Tape
Description: Flexible laminated film coated with permanent acrylic pressure sensitive adhesive and backed with poly coated release liner. Safety grade photoluminescent material designed to glow 24+ hours. Product withstands UV-light and does not show significant degradation when used outdoors. |
| GLOW Photoluminescent Material Tape
Description: Flexible laminated film coated with permanent acrylic pressure sensitive adhesive and backed with poly coated release liner. Promotional grade photoluminescent material is designed to glow 1+ hours. |
| Optiflex Reseal Clear Tape
General Description:
This is a top coated hard clear polypropylene film coated with a low adhesion removable pressure sensitive acrylic adhesive and backed with an ultra smooth clear polyester release liner. Release liner has excellent roll tracking properties.
Note:
Application environments and certain surfaces such as vinyl, glass, acrylic, styrene, polycarbonate can cause increased adhesion and adhesive transfer. We recommend that all surfaces be tested for compatibility and removability. |
 | PF14 Paper Identification Tape
Description: A medium tensile strength, pressure-sensitive, kraft flatback, paper packaging and identification tape designed for lightweight packaging, bag locking, decorative edging, marking and color coding. Specially formulated adhesive provides for easier unwind while exhibiting an excellent balance of face to face adhesion and quick stick characteristics. Printable with standard flexographic ink. Applications: Primarily used for vapor sealing fiberglass ductboard and sheet metal ducts; can also be used on FSK systems. |
| PM200 ID Tape
Description: PM200 is a UL-recognized/CSA-accepted 2.0 mil ink-receptive white polyester coated with an aggressive, high-performance, permanent pressure-sensitive acrylic adhesive and backed with a 50 lb. bleached kraft roll form release liner. Applications: Ideal for durable good labeling applications such as brand identification markings and safety/hazard warning labels. All of the descriptive information, the typical performance data, and recommendations for the use of this product shall be used only as a guide and do not reflect the specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind. All purchasers shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. |
| PM500 - Clear Tape
Description: This is a clear polyester film coated with a permanent pressure sensitive acrylic adhesive and backed with a semi-bleached release liner. All of the descriptive information, the typical performance data, and recommendations for the use of this product shall be used only as a guide and do not reflect the specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind. All purchasers shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. |
| PP200 - Clear Polypropylene Film
Description: This is a topcoated hard clear polypropylene film coated with a reworkable permanent pressure sensitive acrylic adhesive and backed with an ultra smooth clear polyester release liner. Release liner has excellent roll tracking properties. |
| PP200RS - Resealable Clear Polypropylene Film
Description: This is a topcoated hard clear polypropylene film coated with a low adhesion removable pressure sensitive acrylic adhesive and backed with an ultra smooth clear polyester release liner. Release liner has excellent roll tracking properties. Note: Application environments and certain surfaces such as vinyl, glass, acrylic, styrene, polycarbonate compatibility and removability. |
|
Tell your suppliers you found them on ThomasNet
