Pumps: Metering related categories
 | 200 Series Assemblies
250-PHO: Pump Head Only
The 250-PHO offers reliability and precision in a small package. The 250 pump head, with 2 1/4′′ square housing, is capable of flow rates up to 450 ml per minute. The 250-PHO is a good choice for use from the laboratory to industrial appications. It is available in fixed speed, air drive and, variable DC configurations.
250-140 & 250-150: Fixed Speed Assemblies
The 250-140 and 250-150 are fixed speed assemblies featuring the 250 pump head mounted on a steel base with a shunt-wound, geared motor and an expanded metal cover. These assemblies are compact, easy-to-use units that are suitable for low-flow metering applications.
250-342: Vari-Flow™ DC Speed Control Pump
The 250-342 is an assembly with a DC motor and control mounted on a steel base. The standard control comes in a NEMA 4 enclosure and provides features such as a forward/brake/reverse switch, local/remote selection, and manual speed potentiometer. The control can receive a signal input of 4-20 MA or 0-10 VDC. The 250-342 Vari-Flow pump is suitable for process applications, laboratory, and industrial uses.
250-400: Air Driven Pump
The 250-400 is an assembly consisting of an air motor and pump mounted on a steel base. The air motor is intended for safe use in applications where there may be explosive vapors or powders present.
Tubing Sizes:
The 250-PHO uses two interchangeable sizes of tubing: 1/16′′ I.D. x 3/16′′ O.D. or 1/8′′ I.D. x 1/4′′ O.D.
Industries: Paper & pulp, laboratory, sampling, water treatment, ink, and fluid transfer.
Custom assemblies are available upon request. For a quotation please contact our sales office. |
 | 300 Series Econ II Assemblies
300-OQC: Pump Head Only
The 300-OQC is polycarbonate molded pump head ideal for OEM and laboratory applications. With the quick-release cover design, the 300-OQC pump is easy to clean and change tubing. The 300-OQC is designed to use flexible tubing with a durometer of 35-55 (Shore A). The 300-OQC comes standard with a dual impeller yoke, but can be configured for three impellers and is designed to mount on a panel or directly to a motor.
300-060, 300-062, 300-063 & 300-064: Fixed SPeed Assemblies
The 300-060 through 300-064 are fixed speed assemblies that provide various options to the OEM and other industrial or laboratory customers. The 300-OQC is directly mounted on a shunt-wound, geared AC motor.
300-318:Vari-Flow™ DC Speed Control Pump
The 300-318 is a standard Vari-Flow pump configuration with the 300-OQC mounted on a small table-top cabinet. Each unit includes a DC motor and control. The 300-318 is an excellent choice for low-flow metering and sampling applications.
300-318-2V: Vari-Flow Speed Control Pump
The 300-318-2V, like the 300-318, features the 300-OQC pump head with 50/60 Hz input power. The 300-318-2V is an excellent choice for locations where 60 Hz power is not an option.
300-319: Vari-Flow DC SPeed Control Pump
The 300-319 is a standard vari-Flow pump configuration with the 300-OQC mounted on a small table-top cabinet. Each unit includes a DC motor and control. The 300-319 is an excellent choice for low-flow metering and sampling applications. The 300-319 comes standard with a green dot hospital cord and an pneumatic foot switch.
300-320: Vari-Flow DC SPeed Control Pump
The 300-320 is a standard Vari-Flow pump configuration with the 300-OQC mounted on a small table-top cabinet. Each unit includes a DC motor and control. The 300-320 comes standard with a green dot hospital cord and a pneumatic foot switch, and is configured for 115/220 Volt - 50/60 HZ input power.
Tubing Sizes:The 300-OQC uses one size of tubing: 1/4′′ I.D. x 7/16′′ O.D.
Industries: Paper & pulp, laboratory, filling, metering, and sampling applications.
Custom assemblies are available upon request. For a quotation please contact our sales office.
|
 | 400 Series Assemblies
400-PHO: Pump Head Only
The 400-PHO is designed for maximum cost effectiveness, and uses a molded polycarbonate housing and triple or quadruple impeller roller yoke assembly. This panel-mount pump has a hinged cover plate which is intended for more demanding OEM or industrial applications. The models are available in fixed speed, air drive, explosion-proof, and variable speed AC or DC configurations.
400-101: Zero-Max™ Speed Control Pump
The 400-101 is a direct drive unit with a manual speed control providing a speed regularion from 0-400 RPM. This assembly comes with a pump head, Zero-Max speed contro, and a 1/4 HP, 115 VAC, 60 HZ, 1 PH, O.D.P. motor mounted on a steel base. The 400-101 provides a cost-effective substiture for AC or DC speed controls and is used for fluid transfer, metering, printing, and other industrial applications.
400-362: Variable Flow™ DC Speed Control Pumps
The 400-362 is a DC speed control model. THe pumps are mounted on a steel base and coupled to a 1/4 HP, geared, IPC-44, 130 VDC, PM motor. Each unit comes with a speed control in a Nema IV enclosure. The controls accept a 4-20 MA or 0-10 VDC signal and have forward/brake/reverse capability. The Vari-Flow assembly is used in applications where precise speed regulation is needed and with systems that require a remote signal for motor or flow control.
400-450: Air Driven Pump Assembly
The 400-450 is an assembly consisting of a pump head and air motor mounted on a steel base. The air motor is intended for safe use in applications where there may be explosive vapors or powders present.
Tubing Sizes: The 400-PHO uses one size of tubing: 1/4′′I.D. x 7/16′′ O.D.
Industries: Paper & pulp, laboratory, sampling, bilge, ink, and fluid transfer.
Custom assemblies are available upon request. For a quotation please contact our sales office.
|
 | 500 Series Assemblies
500-PHO: Pump Head Only
The 500-PHO is machined from an aluminum casting and has a stainless steel plate and shaft as well as stainless sleeved roller assembly. The pump is rugged, reliable, and easy-to-use. The 500-PHO is good choice for use from the laboratory to industrial applications such as paper & pulp, printing, metering, and fluid transfer.
500-100: Standard Fixed-Speed Pump
The 500-100 is belt-driven pump assembly. The pump comes mounted on a steel base with a 1/4 HP, 115 VAC, 60 HZ, 1 PH, O.D.P. motor with a belt and sheave to reduce the speed to the pump head. This 500-100 is an excellent choice for fluid transfer applications where speed regulation is not required.
500-101: Zero-Max™ Speed Control Pump
The 500-101 is a direct drive unit with a manual speed control providing a speed regulation from 0-400 RPM. This assembly comes with a pump head, Zero-Max speed control and a 1/4 HP, 115 VAC, 60 HZ, 1 PH, O.D.P. motor mounted on a steel base. The 500-101 provides a cost-effective substitute for AC or DC speed controls and is used for fluid transfer, metering, printing, and other industrial applications.
500-200: Explosion-Proof Fixed Speed Pump
The 500-200 is a belt-driven unit with a 1/3 HP, 1 PH, 60/50 HZ, 115/208-230 Volt, Class I, Group D, gasoline vapor atmosphere explosion-proof motor. The pump and motor are mounted on a steel base and connected through a belt & sheave which runs at a constant 430 RPM. The 500-200 is an excellent choice for fluid transfer applications where explosive vapors are present.
500-201: Explosion-Proof Speed Control Pump
The 500-201 is a direct drive unit with a manual speed control providing a speed regulation from 0-400 RPM. This assembly comes with a pump head, Zero-Max speed control, and a 1/3 HP, 1 PH, 60/50 HZ, 115/208-230 Volt, Class I, Group D, gasoline vapor atmosphere explosion-proof motor mounted on a steel base. The 500-201 provides a cost-effective substitute for AC or DC speed controls and is used for fluid transfer, metering, printing, and other industiral applications.
500-332, 500-352 and 500-362: Vari-Flow™ DC Speed Control Pumps
The 500-332, 500-352 and 500-362 are DC speed control models. The pumps are mounted on a steel base and coupled to a 1/4 HP, geared, IPC-44, 130 VDC, PM motor. Each unit comes with a speed control in a Nema IV enclosure. The controls accept a 4-20 MA or 0-10 VDC signal and have forward/brake/reverse capability. Vari-Flow assemblies are used in applications where precise speed regulation is needed and with systems that require a remote signal for motor or flow control.
500-450: Air Drive Pump
The 500-450 is an assembly consisting of an air motor and pump mounted on a steel base. The motor is intended for safe use in applications where there may be explosive vapors or powders present.
Tubing Sizes: The 500-PHO uses two interchangeable sizes of tubing: 3/16′′I.D. x 3/8′′ O.D. or 1/4′′ I.D. x 7/16′′ O.D.
Industries: Paper & pulp, laboratory, sampling, bilge, ink, and fluid transfer.
Custom assemblies are available upon request. For a quotation please contact our sales office.
|
 | 600 Series Assemblies
610-PHO: Pump Head Only
The 610-PHO is machined from an aluminum casting and has a stainless steel plate and shaft as well as stainless sleeved roller assembly. The pump is rugged, reliable, and easy-to-use.
610-100: Standard Fixed-Speed Pump
The 610-100 is belt-driven pump assembly. The 610 pump head comes mounted on a steel base with a 1/4 HP, 115 VAC, 60 HZ, 1 PH, O.D.P. motor with a belt and sheave to reduce the speed to the pump head. This 610-100 is an excellent choice for fixed speed applications.
610-101: Zero-Max™ Speed Control Pump
The 610-101 is a direct drive unit with a manual speed control providing a speed regulation from 0-400 RPM. This assembly comes with a pump head, Zero-Max speed control and a 1/4 HP, 115 VAC, 60 HZ, 1 PH, O.D.P. motor mounted on a steel base. The 610-101 provides a cost-effective substitute for AC or DC speed controls.
610-103: Zero-Max™ Reversible Speed Control Pump
The 610-103 is a direct drive unit with a Zero-Max reversible speed control that provides a speed regulation from 0-400 RPM in either a clockwise or counter clockwise rotation. The 610-103 provides a cost-effective substitute for AC or DC speed controls and is used for metering, printing, and other industrial applications.
610-200: Explosion-Proof Fixed Speed Pump
The 610-200 is a belt-driven unit with a 1/3 HP, 1 PH, 60/50 HZ, 115/208-230 Volt, Class I, Group D, gasoline vapor atmosphere explosion-proof motor. The pump and motor are mounted on a steel base and connected through a belt & sheave which runs at a constant 430 RPM. The 610-200 is an excellent choice for fluid transfer applications where explosive vapors are present.
610-201: Explosion-Proof Speed Control Pump
The 610-201 is a direct drive unit with a manual speed control that provides a speed regulation from 0-400 RPM. This assembly comes with a pump head, Zero-Max speed control, and a 1/3 HP, 1 PH, 60/50 HZ, 115/208-230 Volt, Class I, Group D, gasoline vapor atmosphere explosion-proof motor, Zero-Max speed control, and a Class I, Group D, gasoline vapor atmostphere explosion-proof motor. The 610-201 provides a cost-effective substitute for AC or DC speed controls and is used for metering, printing, and fluid transfer.
610-203: Zero-Max Reversible Explosion-Proof Speed Control Pump
The 610-203 is a direct drive unit with a Zero-Max reversible speed control. This assembly comes with Class I, Group D, gasoline vapor atmosphere explosion-proof motor, Zero-Max speed control, and a Class I, Group D, gasoline vapor atmostphere explosion-proof motor and is a cost-effective substitute for AC or DC speed control units.
610-332, 610-352 and 610-362: Vari-Flow™ DC Speed Control Pumps
The 610-332, 610-352 and 610-362 are DC speed control models. The pumps are mounted on a steel base and coupled to a 1/4 HP, geared, IPC-44, 130 VDC, PM motor. Each unit comes with a speed control in a Nema IV enclosure. The controls accept a 4-20 MA or 0-10 VDC signal and have forward/brake/reverse capability. Vari-Flow assemblies are used in applications where precise speed regulation is needed and with systems that require a remote signal for motor or flow control.
610-450: Air Drive Pump
The 610-450 is an assembly consisting of an air motor and pump mounted on a steel base. The air motor is intended for safe use in applications where there may be explosive vapors or powders present.
Tubing Sizes: The 600-PHO uses two interchangeable sizes of tubing: 3/8′′ I.D. x 5/8′′ O.D. or 1/2′′ I.D. x 3/4′′ O.D.
Industries: Paper & pulp, laboratory, sampling, bilge, ink, and fluid transfer.
Custom assemblies are available upon request. For a quotation please contact our sales office.
|
 | 600 Series SS Assemblies
615-PHO: Pump Head Only
The 615-PHO is machined from a 316 SS casting and has a stainless steel plate and shaft as well as stainless sleeved roller assembly. The pump is rugged, reliable, and easy-to-use. The 615-PHO is designed for applicaitons where the chemical resistance of a stainless steel housing is necessary.
615-101:Zero-Max™ Speed Control Pump
The 615-101 is a direct drive unit with a manual speed control providing a speed regulation from 0-400 RPM. This assembly comes with a pump head, Zero-Max speed control, and a 1/4 HP, 115 VAC, 60 HZ, 1PH, O.D.P. motor mounted on a stainless steel base, with stainless steel coupling guards. The 615-101 provides a cost-effective substitute for AC or DC speed controls and is used for fluid transfer, metering, printing, food, pharmaceutical, and other industrial applications.
615-362:Vari-Flow™ DC Speed Control Pumps
The 615-362 is a DC speed control model. The pump is mounted on a stainless steel base and coupled to a 1/4 HP, geared, IPC-44, 130 VDC, PM motor. Each unit comes with a speed control in a Nema IV enclosure. The controls accept a 4-20 MA or 0-10 VDC signal and have forward/brake/reverse capability. Vari-Flow assemblies are used in applications where precise speed regulation is needed and with systems that require a remote signal for motor or flow control.
Tubing Sizes: The 615-PHO uses two interchangeable sizes of tubing: 3/8′′ I.D. x 5/8′′ O.D. or 1/2′′ I.D. x 3/4′′ O.D.
Industries: Food & beverage, paper & pulp, pharmaceutical, printing, and other industrial applications.
Custom assemblies are available upon request. For a quotation please contact our sales office.
|
 | 600 Series Hinged Pump
620-PHO: Pump Head Only
The 620-PHO is the newest addition to the 600 series of pump heads and features a hinged side plate and tube clamp as well as a pump that can be mounted in 90º increments of rotation. The pump housing is machined from an aluminum casting and the internal plate and shaft are stainless steel. The 620-PHO provides easy access to the tubing without separate parts, such as knurled nuts, that can be lost.
620-101:Zero-Max™ Speed Control Pump
The 620-101 is a direct drive unit with a manual speed control providing a speed regulation from 0-400 RPM. This assembly comes with a pump head, Zero-Max speed control, and a 1/4 HP, 115 VAC, 60 HZ, 1PH, O.D.P. motor mounted on a stainless steel base. The 620-101 provides a cost-effective substitute for AC or DC speed controls and is used for fluid transfer, metering, printing, and other industrial applications.
620-103: Zero-Max Reversible Speed Control Pump
The 620-103 is a direct drive unit with a Zero-Max reversible speed control, that provides a speed regulation from 0-400 RPM in either a clockwise or counter clockwise rotation. This assembly comes with a pump head, Zero-Max speed control, and a 1/4 HP, 115 VAC, 60 HZ, 1 PH, O.D.P. motor mounted on a steel base. The 620-103 provides a cost-effective substitute for AC or DC speed controls and is used for fluid transfer, metering, printing, and other industrial applications.
620-332, 620-352 & 620-362:Vari-Flow™ DC Speed Control Pumps
The 620-332, 620-352 and 615-362 iare DC speed control model. The pumps are mounted on a stainless steel base and coupled to a 1/4 HP, geared, IPC-44, 130 VDC, PM motor. Each unit comes with a speed control in a Nema IV enclosure. The controls accept a 4-20 MA or 0-10 VDC signal and have forward/brake/reverse capability. Vari-Flow assemblies are used in applications where precise speed regulation is needed and with systems that require a remote signal for motor or flow control.
Tubing Sizes: The 620-PHO uses two interchangeable sizes of tubing: 3/8′′ I.D. x 5/8′′ O.D. or 1/2′′ I.D. x 3/4′′ O.D.
Industries: Paper & pulp, laboratory, sampling, bilge, ink and fluid transfer.
Custom assemblies are available upon request. For a quotation please contact our sales office.
|
 | TP 1000V
The TP 1000 V is designed as an exact dose, extremely precise, metering or bottling peristaltic pump. The TP 1000 V can be operated in a semiautomatic mode or be fully integrated through the RS232 as an automatic filling or metering machine. With a flow rate range of .38 ml to .177 ml per minute, depending on tubing and rotor assembly selection, the TP 1000 V is an excellent choice for laboratories or filling operations that require repeatable and reliable filling or metering applications. Existing applications include:
- Filling bottles for small to medium batch applications.
- Precise metering against a discharge pressure 3 bar (43.5 psi)
- Biotechnology applications
- Medical and Pharmaceutical applications
- Laboratory applications
As a stand alone unit the TP 1000 V can be programmed through the touch screen provide or can be integrated into a PLC or computer control. The TP 1000 V also provides for a 4-20 mA or 0-10 VDC signal input provided from a variety of sensors and inputs. |
|
Tell your suppliers you found them on ThomasNet