Adhesives related categories
 | AST-RTV™ - Silicone Adhesive/Sealant/Instant Gasket
100% RTV Silicone is a multi-purpose, single-component adhesive sealant that quickly adheres to most surfaces. It cures in 24 hours to provide a tough, resilient, silicone rubber good for hundreds of applications.
100% RTV Silicone can be used for gasketing, sealing, bonding, insulating, caulking, encapsulating, and coating. This flexible material resists shrinking, cracking, weather, ozone, chemicals, moisture, vibration, and extreme temperatures ranging from -85º to +450ºF (-65º to +232ºC), Hi-Temp Red to 500ºF (260ºC) continuous and 600ºF intermittent exposure. Low-volatile formula recommended for many automotive applications.
AST-RTV Silicone is USDA, UL, and NSF approved. Meets FDA Reg. No. 21 CFR 177-2600 and MIL-A-46106 Specs. The equivalent of Dow Corning′s 732 and 736, GM, Ford, and Chrysler specs.
AST-RTV Silicone is great for making replacements of custom gaskets and seals for all types of motors, transmissions, gear housings, pumps, power tools, machinery, etc. It′s better than conventional gaskets because it fills in surface irregularities.
As a sealer and caulk, use AST-RTV Silicone to seal heating and ventilating ducts. It seals cracks and gaps around windows, vents, doors, machinery, truck cabs and trailers, fixtures, lights, walls, bathtubs, sinks, etc. It can be used to waterproof electrical connections and boxes. It seals out water from compartments in machinery as well as holes where wire tubing or refrigeration lines run through walls.
As a flexible adhesive, AST-RTV Silicone is versatile and easily bonds dissimilar materials. It provides excellent adhesion to clean metal, glass, most types of wood, ceramic, porcelain, painted, and many plastic surfaces. Attach nameplates and signs to equipment, walls, doors, windows, (interior or exterior). AST-RTV Silicone bonds gaskets in heating and refrigeration units.
As a specialty sealant AST-RTV Silicone can be used to seal or coat components exposed to moisture, vibration, shock, certain fuels, oils, solvents, chemicals and corrosives for a long period of time. This product can be used as a formed-in-place gasket where irregular shapes and harsh conditions reject ordinary seals. It is also effective for repairing electrical insulation, sealing insulators and entrance ports to transformers.
Features and Benefits :-- Superior caulking, bonding and sealing qualities.
- Easier to use than other gasketing methods.
- Resists chemicals, temperature extremes, weather, vibration, moisture and ozone.
- Will not sag, run off, or shrink.
- Functions in hundreds of applications as a specialty sealant and flexible adhesive.
- Excellent non-conducting characteristics.
- Low volatile material available, oxygen sensor safe.
- Neutral cure available for masonry.
Applications :- Hi-temp Sealing, Waterproof Sealant, Instant Gasket Sealing, and Insulating. |
 | CA™ - Instant Adhesives
Instant Adhesives
CA-020™ (Regular Viscosity) instant adhesive is an ethyl-cyanoacrylate adhesive. CA-020 is a general purpose, fast-curing product with good elasticity for bonding plastics, metal, rubber, glass, and dissimilar materials.
CA-120™ (Medium Viscosity) instant adhesive is slightly thicker for those applications requiring less run off. Better for metal and ceramics.
CA-220™ (Non-run Gel) instant adhesive for overhead or vertical areas where the adhesive must stay put during pre-assembly. Best for porous surfaces.
Features and Benefits :-- Most versatile instant adhesives available.
- Fast overall cure speed.
- Three viscosities to accommodate all requirements.
- Convenient dispenser bottle with screw cap.
Temperature Range :-
-40° to 180°F (-40° to 82°C), Intermittent 250°F (121°C).
Applications :-
Electronic equipment including PC boards, connectors, and transformers. Plastic cases, rubber fabrication and gaskets, appliances, and office equipment. |
 | Adhesive Spray
Adhesive Spray is a multi-purpose, pressure-sensitive adhesive designed to form either permanent or temporary bonds between two porous or non-porous materials.
Adhesive Spray is specially designed for many industrial applications as well as contractor, office, home, and hobby use. Adhesive solids are non-toxic, non-irritating, and meet requirements for indirect food additives as outlined in Fed. Reg. paragraphs 121.2507 to 121.2577.
Features and Benefits :-- Colorless.
- Low soak-in.
- Non-clogging.
- Waterproof.
- Non-toxic solids.
- Fast aggressive tack action.
- Aerosol is CFC Free.
Temperature Range :-
Up to 110°F
Applications :-
Permanent and temporary bonds on paper, cardboard, all types of gaskets, cloth, foil, mylar or acetate sheets, glass, many plastics, urethane foam, leather and foam rubber. Temporary bond eliminates need for tacks or pins making any surface a bulletin board. Printing plants, advertising agencies, trucking companies, shipping departments, and/or any industry requiring package sealing and applying labels. |
|
Tell your suppliers you found them on ThomasNet