Alloys related categories
 | Aluminum Sheet and Coil - Series 1100-0
1100 grade is commercially pure aluminum. It is soft and ductile and has excellent workability. It is ideal for applications involving intricate forming because it work hardens more slowly than other alloys. It is the most wieldable of aluminum alloys, by any method. It is non heat-treatable. It has excellent resistance to corrosion and is widely used in the chemical and food processing industries. It responds well to decorative finishes which make it suitable for giftware.
1100-0
Mill Finish
Paper Interleaved
AMS-QQ-A-250/1 AMS4001 ASTM B209 |
| Aluminum Sheet and Coil - Series 1100-H14
1100 grade is commercially pure aluminum. It is soft and ductile and has excellent workability. It is ideal for applications involving intricate forming because it work hardens more slowly than other alloys. It is the most wieldable of aluminum alloys, by any method. It is non heat-treatable. It has excellent resistance to corrosion and is widely used in the chemical and food processing industries. It responds well to decorative finishes which make it suitable for giftware.
1100-H14
Mill Finish
AMS-QQ-A-250/1 AMS4003 ASTM B209 |
| Aluminum Sheet - Series 1100-H25
1100 grade is commercially pure aluminum. It is soft and ductile and has excellent workability. It is ideal for applications involving intricate forming because it work hardens more slowly than other alloys. It is the most wieldable of aluminum alloys, by any method. It is non heat-treatable. It has excellent resistance to corrosion and is widely used in the chemical and food processing industries. It responds well to decorative finishes which make it suitable for giftware.
One Side Bright
1100-H25
Paper Interleaved |
| Aluminum Sheet and Coil - Series 3003-0
3003 is the most widely used of all aluminum alloys. It is essentially commercially pure aluminum with the addition of manganese which increases the strength some 20% over the 1100 grade. Thus, it has all the excellent characteristics of 1100 with higher strength. It has excellent corrosion resistance. It has excellent workability and it may be deep drawn or spun, welded or brazed. It is non heat treatable. Applications: cooking utensils, decorative trim, awnings, siding, storage tanks, chemical equipment.
3003-0
Mill Finish
Paper Interleaved
AMS-QQ-A-250/2 AMS4006 ASTM B209 |
| Aluminum Sheet and Coil - Series 3003-H14
3003 is the most widely used of all aluminum alloys. It is essentially commercially pure aluminum with the addition of manganese which increases the strength some 20% over the 1100 grade. Thus, it has all the excellent characteristics of 1100 with higher strength. It has excellent corrosion resistance. It has excellent workability and it may be deep drawn or spun, welded or brazed. It is non heat treatable. Applications: cooking utensils, decorative trim, awnings, siding, storage tanks, chemical equipment.
3003-H14
Mill Finish
AMS-QQ-A-250/2 AMS 4008 ASTM B209 |
| Stucco Embossed Sheet and Coil
3003 is the most widely used of all aluminum alloys. It is essentially commercially pure aluminum with the addition of manganese which increases the strength some 20% over the 1100 grade. Thus, it has all the excellent characteristics of 1100 with higher strength. It has excellent corrosion resistance. It has excellent workability and it may be deep drawn or spun, welded or brazed. It is non heat treatable. Applications: cooking utensils, decorative trim, awnings, siding, storage tanks, chemical equipment.
3003-H114
Mill Finish
2-Side Embossed |
| Aluminum Flat Sheet
5005 alloy is generally considered to be an improved version of 3003. It has the same general mechanical properties as 3003 but appears to stand up better in actual service. It is readily workable. It can be deep drawn or spun, welded or brazed. It has excellent corrosion resistance. It is non heat-treatable. It is well suited for anodizing and has less tendency to streak or discolor. Applications: cooking utensils, decorative trim, awnings, siding, storage tanks, chemical equipment.
5005-H34
Mill Finish Interleaved
ASTM B209 |
| Anodized Aluminum Sheet and Coil
5005 alloy is generally considered to be an improved version of 3003. It has the same general mechanical properties as 3003 but appears to stand up better in actual service. It is readily workable. It can be deep drawn or spun, welded or brazed. It has excellent corrosion resistance. It is non heat-treatable. It is well suited for anodizing and has less tendency to streak or discolor. Applications: cooking utensils, decorative trim, awnings, siding, storage tanks, chemical equipment.
5005-H34
Satin Clear Finish
Paper Interleaved Sheet
Coating Thickness 201R1
201R1 is Exterior Standard No. 1/201 = 0.0002 minimum coating thickness/R1 = Medium Matte |
| Aluminum Sheet and Coil - Series 5052-0
5052 is the highest strength alloy of the more common non heat-treatable grades. Fatigue strength is higher than most aluminum alloys. In addition, this grade has particularly good resistance to marine atmosphere and salt water corrosion. It has excellent workability. It may be drawn or formed into intricate shapes and its slightly greater strength in the annealed condition minimizes tearing that occurs in 1100 and 3003. Applications: Used in a wide variety of applications from aircraft components to home appliances, marine and transportation industry parts, heavy duty cooking utensils and equipment for bulk processing of food.
5052-0
Mill Finish
Interleaved
AMS-QQ-A-250/8 AMS 4015 ASTM B209 |
| Aluminum Sheet and Coil - Series 5052-H32
5052 is the highest strength alloy of the more common non heat-treatable grades. Fatigue strength is higher than most aluminum alloys. In addition, this grade has particularly good resistance to marine atmosphere and salt water corrosion. It has excellent workability. It may be drawn or formed into intricate shapes and its slightly greater strength in the annealed condition minimizes tearing that occurs in 1100 and 3003. Applications: Used in a wide variety of applications from aircraft components to home appliances, marine and transportation industry parts, heavy duty cooking utensils and equipment for bulk processing of food.
5052-H32
Mill Finish
AMS-QQ-A-250/8 AMS 4016 ASTM B209 |
| Aluminum Sheet and Coil - Series 5052-H34
5052 is the highest strength alloy of the more common non heat-treatable grades. Fatigue strength is higher than most aluminum alloys. In addition, this grade has particularly good resistance to marine atmosphere and salt water corrosion. It has excellent workability. It may be drawn or formed into intricate shapes and its slightly greater strength in the annealed condition minimizes tearing that occurs in 1100 and 3003. Applications: Used in a wide variety of applications from aircraft components to home appliances, marine and transportation industry parts, heavy duty cooking utensils and equipment for bulk processing of food.
5052-H34
Mill Finish
AMS-QQ-A-250/8 AMS 4016 ASTM B209 |
 | Aluminum Plate - Series 2024-T351
2024 is one of the best known of the high strength aluminum alloys. With its high strength and excellent fatigue resistance, it is used to advantage on structures and parts where good strength-to-weight ratio is desired. It is readily machined to a high finish. It is readily formed in the annealed condition and may be subsequently heat treated. Arc or gas welding is generally not recommended, although this alloy may be spot, seam or flash welded. Since corrosion resistance is relatively low, 2024 is commonly used with an anodized finish or in clad form (′′Alclad′′) with a thin surface layer of high purity aluminum. Applications: aircraft structural components, aircraft fittings, hardware, truck wheels and parts for the transportation industry.
2024-T351
Mill Finish Stenciled and Interleaved
AMS-QQ-A-250/4 ASTM B209 |
| Aluminum Plate - Series 5052-H32
5052 is the highest strength alloy of the more common non heat-treatable grades. Fatigue strength is higher than most aluminum alloys. In addition, this grade has particularly good resistance to marine atmosphere and salt water corrosion. It has excellent workability. It may be drawn or formed into intricate shapes and its slightly greater strength in the annealed condition minimizes tearing that occurs in 1100 and 3003. Applications: Used in a wide variety of applications from aircraft components to home appliances, marine and transportation industry parts, heavy duty cooking utensils and equipment for bulk processing of food.
5052-H32
Mill Finish Interleaved
AMS-QQ-A-250/8 AMS 4016 |
| Aluminum Plate - Series 5052-0
5052 is the highest strength alloy of the more common non heat-treatable grades. Fatigue strength is higher than most aluminum alloys. In addition, this grade has particularly good resistance to marine atmosphere and salt water corrosion. It has excellent workability. It may be drawn or formed into intricate shapes and its slightly greater strength in the annealed condition minimizes tearing that occurs in 1100 and 3003. Applications: Used in a wide variety of applications from aircraft components to home appliances, marine and transportation industry parts, heavy duty cooking utensils and equipment for bulk processing of food.
5052-0
Mill Finish Interleaved
AMS-QQ-A-250/8 AMS 4015 |
| Aluminum Plate - Series 5086-H32
For many years there has been a need for aluminum sheet and plate alloys that would offer, for high strength welded applications, several distinct benefits over such alloys as 5052 and 6061. Some of the benefits fabricators have been seeking are greater design efficiency, better welding characteristics, good forming properties, excellent resistance to corrosion and the same economy as in other non heat-treatable alloys. Metallurgical research has developed 5083 and 5086 as superior wieldable alloys which fill these needs. Both alloys have virtually the same characteristics with 5083 having slightly higher mechanical properties due to the increased manganese content over 5086. Applications: unfired pressure vessels, missile containers, heavy-duty truck and trailer assemblies, boat hulls and superstructures.
5086-H32
Mill Finish
AMS-QQ-A-250/7 |
| Aluminum Plate - Series 5086-H16
For many years there has been a need for aluminum sheet and plate alloys that would offer, for high strength welded applications, several distinct benefits over such alloys as 5052 and 6061. Some of the benefits fabricators have been seeking are greater design efficiency, better welding characteristics, good forming properties, excellent resistance to corrosion and the same economy as in other non heat-treatable alloys. Metallurgical research has developed 5083 and 5086 as superior wieldable alloys which fill these needs. Both alloys have virtually the same characteristics with 5083 having slightly higher mechanical properties due to the increased manganese content over 5086. Applications: unfired pressure vessels, missile containers, heavy-duty truck and trailer assemblies, boat hulls and superstructures.
5086-H16
Mill Finish
AMS-QQ-A-250/7 |
| Aluminum Plate - Series 5086-H116
For many years there has been a need for aluminum sheet and plate alloys that would offer, for high strength welded applications, several distinct benefits over such alloys as 5052 and 6061. Some of the benefits fabricators have been seeking are greater design efficiency, better welding characteristics, good forming properties, excellent resistance to corrosion and the same economy as in other non heat-treatable alloys. Metallurgical research has developed 5083 and 5086 as superior wieldable alloys which fill these needs. Both alloys have virtually the same characteristics with 5083 having slightly higher mechanical properties due to the increased manganese content over 5086. Applications: unfired pressure vessels, missile containers, heavy-duty truck and trailer assemblies, boat hulls and superstructures.
5086-H116
Mill Finish
AMS-QQ-A-250/7 |
| Aluminum Plate - Series 6061-0
6061 is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form (′′Alclad′′) with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required.
6061-0
Mill Finish Stenciled and Interleaved
AMS-QQ-A-250/10 ASTM B209 |
| Aluminum Plate - Series 7075-T651
7075 is one of the highest strength aluminum alloys available Its strength-to weight ratio is excellent and it is ideally used for highly stressed parts. It may be formed in the annealed condition and subsequently heat treated. Spot or flash welding can be used, although arc and gas welding are not recommended. It is available in the clad (′Alclad′′) form to improve the corrosion resistance with the over-all high strength being only moderately affected. Applications: Used where highest strength is needed.
7075-T651
Mill Finish Stenciled and Interleaved
AMS-QQ-A-250/12 ASTM B209 |
| Tread Sheet and Plate - Series 3003-H22
3003 is the most widely used of all aluminum alloys. It is essentially commercially pure aluminum with the addition of manganese which increases the strength some 20% over the 1100 grade. Thus, it has all the excellent characteristics of 1100 with higher strength. It has excellent corrosion resistance. It has excellent workability and it may be deep drawn or spun, welded or brazed. It is non heat treatable. Applications: cooking utensils. decorative trim, awnings, siding, storage tanks, chemical equipment.
3003-H22
Bright Finish |
| Tread Sheet and Plate - Series 3003-H320
3003 is the most widely used of all aluminum alloys. It is essentially commercially pure aluminum with the addition of manganese which increases the strength some 20% over the 1100 grade. Thus, it has all the excellent characteristics of 1100 with higher strength. It has excellent corrosion resistance. It has excellent workability and it may be deep drawn or spun, welded or brazed. It is non heat treatable. Applications: cooking utensils. decorative trim, awnings, siding, storage tanks, chemical equipment.
3003-H320
Bright Finish |
| Embossed Tread Sheet and Plate
3003 is the most widely used of all aluminum alloys. It is essentially commercially pure aluminum with the addition of manganese which increases the strength some 20% over the 1100 grade. Thus, it has all the excellent characteristics of 1100 with higher strength. It has excellent corrosion resistance. It has excellent workability and it may be deep drawn or spun, welded or brazed. It is non heat treatable. Applications: cooking utensils. decorative trim, awnings, siding, storage tanks, chemical equipment.
3003-H22
Bright Finish |
| Tread Sheet and Plate - Series 5086-H34
For many years there has been a need for aluminum sheet and plate alloys that would offer, for high strength welded applications, several distinct benefits over such alloys as 5052 and 6061. Some of the benefits fabricators have been seeking are greater design efficiency, better welding characteristics, good forming properties, excellent resistance to corrosion and the same economy as in other non heat-treatable alloys. Metallurgical research has developed 5083 and 5086 as superior wieldable alloys which fill these needs. Both alloys have virtually the same characteristics with 5083 having slightly higher mechanical properties due to the increased manganese content over 5086. Applications: unfired pressure vessels, missile containers, heavy-duty truck and trailer assemblies, boat hulls and superstructures.
5086-H34 |
| Aluminum Tread Plate
6061 is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form (′′Alclad′′) with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required.
6061-T6
Mill Finish |
 | Coiled Aluminum Tube
3003 is the most widely used of all aluminum alloys. It is essentially commercially pure aluminum with the addition of manganese which increases the strength some 20% over the 1100 grade. Thus, it has all the excellent characteristics of 1100 with higher strength. It has excellent corrosion resistance. It has excellent workability and it may be deep drawn or spun, welded or brazed. It is non heat treatable. Applications: cooking utensils. decorative trim, awnings, siding, storage tanks, chemical equipment.
3003-0
50′ Coils Soft Annealed All Purpose
ASTM B483 AMS 4065 UNS A93003 |
| Aluminum Furniture Tubing
6063 grade is commonly referred to as the architectural alloy. It was developed as an extrusion alloy with relatively high tensile properties, excellent finishing characteristics and a high degree of resistance to corrosion. This alloy is most often found in various interior and exterior architectural applications, such as windows, doors, store fronts and assorted trim items. It is the alloy best suited for anodizing applications - either plain or in a variety of colors.
6063-T832
Bright surface finish
ASTM B483 UNS A96063 |
| Aluminum Round Tubing
6061 is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form (′′Alclad′′) with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required.
6061-T6511 6061-T6
Seamless Extruded Tubing
24′ Stock Lengths
AMS-QQ-A-200/8 (Structural) ASTM B241 (Seamless) |
 | Aluminum Rectangular Tubing
6063 grade is commonly referred to as the architectural alloy. It was developed as an extrusion alloy with relatively high tensile properties, excellent finishing characteristics and a high degree of resistance to corrosion. This alloy is most often found in various interior and exterior architectural applications, such as windows, doors, store fronts and assorted trim items. It is the alloy best suited for anodizing applications - either plain or in a variety of colors.
6063-T52
Extruded Stock Lengths 21 ′′1′′ (Sharp Inside and Outside Corners)
AMS-QQ-A-200/9 |
 | Aluminum Square Tubing - Series 6063-T52
6063 grade is commonly referred to as the architectural alloy. It was developed as an extrusion alloy with relatively high tensile properties, excellent finishing characteristics and a high degree of resistance to corrosion. This alloy is most often found in various interior and exterior architectural applications, such as windows, doors, store fronts and assorted trim items. It is the alloy best suited for anodizing applications - either plain or in a variety of colors.
6063-752
Extruded Stock Lengths 21′ 1′′ (Sharp Inside and Outside Corners)
AMS-QQ-A-200/9 |
| Aluminum Square Tubing - Series 6061-T6
6061 is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form (′′Alclad′′) with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required.
6061-T6
Extruded Stock Lengths 24′ (Sharp Inside and Outside Corners)
AMS-QQ-A-200/8
|
 | Structural Aluminum Pipe - Series 6063-T6
6063 grade is commonly referred to as the architectural alloy. It was developed as an extrusion alloy with relatively high tensile properties, excellent finishing characteristics and a high degree of resistance to corrosion. This alloy is most often found in various interior and exterior architectural applications, such as windows, doors, store fronts and assorted trim items. It is the alloy best suited for anodizing applications - either plain or in a variety of colors.
6063-T6 Schedule 40
20′ Lengths
ASTM B429 UNS A96063 |
 | Structural Aluminum Pipe - Series 6061-T6
6061 is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form (′′Alclad′′) with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required.
6061-T6 Schedule 40
20′ Lengths
ASTM B429 UNS A96063 UNS A96061 |
 | Structural Handrail Pipe
6063 grade is commonly referred to as the architectural alloy. It was developed as an extrusion alloy with relatively high tensile properties, excellent finishing characteristics and a high degree of resistance to corrosion. This alloy is most often found in various interior and exterior architectural applications, such as windows, doors, store fronts and assorted trim items. It is the alloy best suited for anodizing applications - either plain or in a variety of colors.
6063-T6 Schedule 40
Not Stenciled
20′ Lengths
Boxed and Interleaved |
 | Seamless Aluminum Pipe - Series 6061-T6 Schedule 40
6061 is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form (′′Alclad′′) with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required.
6061-T6 Schedule 40
20′ Lengths
ASTM B241 UNS A96061 |
| Seamless Aluminum Pipe - Series 6061-T6 Schedule 80
6061 is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form (′′Alclad′′) with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required.
6061-T6
Schedule 80
20′ Lengths
ASTM B241 UNS A96061 |
| Seamless Aluminum Pipe - Series 6063-T6 Schedule 10
6063 grade is commonly referred to as the architectural alloy. It was developed as an extrusion alloy with relatively high tensile properties, excellent finishing characteristics and a high degree of resistance to corrosion. This alloy is most often found in various interior and exterior architectural applications, such as windows, doors, store fronts and assorted trim items. It is the alloy best suited for anodizing applications - either plain or in a variety of colors.
6063-T6
Schedule 10
20′ Lengths Stenciled
ASTM B241 UNS A96063 |
| Seamless Aluminum Pipe - Series 6063-T6 Schedule 40
6063 grade is commonly referred to as the architectural alloy. It was developed as an extrusion alloy with relatively high tensile properties, excellent finishing characteristics and a high degree of resistance to corrosion. This alloy is most often found in various interior and exterior architectural applications, such as windows, doors, store fronts and assorted trim items. It is the alloy best suited for anodizing applications - either plain or in a variety of colors.
6063-T6
Schedule 40
20′ Lengths Stenciled
ASTM B241 UNS A96063 |
 | Sheet and Strip Cartridge Brass
Made in a variety of widths, gauges and tempers - for stamping, deep drawing, forming, spinning and spring applications. Precise control of grain structure means economy in fabrication, with excellent finish and quality.
Cartridge Brass, 70% - For small arms, shell cases; deep drawn and spun parts; eyelet machine products.
Hard Temper
Specifications:
CDA 260 ASTM B19, B36
UNS C26000
Nominal Composition:
Copper: 70% Zinc: 30% |
| Sheet - Cartridge Brass
Made in a variety of widths, gauges and tempers - for stamping, deep drawing, forming, spinning and spring applications. Precise control of grain structure means economy in fabrication, with excellent finish and quality.
Cartridge Brass, 70% - For small arms, shell cases; deep drawn and spun parts; eyelet machine products.
Soft, 1/4 Hard, Half Hard
8′ and 10′ Mill Lengths
Specifications:
CDA260 AMS 4505, 4507 ASTMB19, B36
UNS C26000
Nominal Composition:
Copper 70% Zinc 30% |
| Strip & Coil - Cartridge Brass
Made in a variety of widths, gauges and tempers - for stamping, deep drawing, forming, spinning and spring applications. Precise control of grain structure means economy in fabrication, with excellent finish and quality.
Cartridge Brass, 70% - For small arms, shell cases; deep drawn and spun parts; eyelet machine products.
Copper Strip - For drawing, stamping, spinning; for leaders, gutters, flashing.
Soft, 1/4 Hard and Half Hard Temper
Drawing and Spinning Quality
Specifications:
CDA260 AMS 4505, 4507 ASTMB19, B36 UNS C2600O
Nominal Composition:
Copper: 70% Zinc 30% |
 | Cartridge Brass Coil & Sheet
Made in a variety of widths, gauges and tempers - for stamping, deep drawing, forming, spinning and spring applications. Precise control of grain structure means economy in fabrication, with excellent finish and quality.
Cartridge Brass, 70% - For small arms, shell cases; deep drawn and spun parts; eyelet machine products.
Spring Temper
Coil and Sheet
Specifications:
CDA260 AMS 4505, 4507 ASTMB19, B36 UNS C26000
Nominal Composition:
Copper: 70% Zinc 30% |
| Sheet - Phosphor Bronze Grade A
Made in a variety of widths, gauges and tempers - for stamping, deep drawing, forming, spinning and spring applications. Precise control of grain structure means economy in fabrication, with excellent finish and quality.
Phosphor Bronzes - Excellent for spring contacts, for electronic and mechanical devices, diaphragms, instruments. Good fatigue and wear resistance.
Spring Temper
8′ Mill Lengths
Specifications:
CDA 510 AMS4510 ASTM B103 UNS C51000
Nominal Composition:
Copper 95% Tin 5% Phosphorus 0.03 - 0.35% |
| Coil Phosphor Bronze (UNS C51000)
Made in a variety of widths, gauges and tempers - for stamping, deep drawing, forming, spinning and spring applications. Precise control of grain structure means economy in fabrication, with excellent finish and quality.
Phosphor Bronzes - Excellent for spring contacts, for electronic and mechanical devices, diaphragms, instruments. Good fatigue and wear resistance.
Spring Temper
Specifications:
CDA 510 AMS 4510 ASTM B103
Nominal Composition:
Copper 95% Tin 4% Phosphorus 0.03 - 0.35% |
| Coil Phosphor Bronze Grade C (8%)
Made in a variety of widths, gauges and tempers - for stamping, deep drawing, forming, spinning and spring applications. Precise control of grain structure means economy in fabrication, with excellent finish and quality.
Phosphor Bronzes - Excellent for spring contacts, for electronic and mechanical devices, diaphragms, instruments. Good fatigue and wear resistance.
Extra Spring Temper #10 Hard
Specifications:
CDA 521 ASTM B103 UNS 52100
Nominal Composition:
Copper 92% Tin 8% Phosphorus 8% |
| Sheet - Leaded Brass (Clock Brass)
Made in a variety of widths, gauges and tempers - for stamping, deep drawing, forming, spinning and spring applications. Precise control of grain structure means economy in fabrication, with excellent finish and quality.
Leaded Brasses - Flat, stiff, free-cutting brass for blanking; clock, watch, and instrument frames; wheels and so on. Also used for engraving purposes.
Half and Full Hard
Coil and 8′ Mill Length
Specification:
CDA 353 UNSC35300 ASTM B121
Nominal Composition:
Copper 65% Zinc 33% Lead 2% |
| Sheet- Muntz Metal
Made in a variety of widths, gauges and tempers - for stamping, deep drawing, forming, spinning and spring applications. Precise control of grain structure means economy in fabrication, with excellent finish and quality.
Cold Rolled
Specifications:
CDA 280 ASTM B36
UNS - C28000
Nominal Composition:
Copper 60% Zinc 40% |
| Plate - Cartridge Brass
Cartridge Brass, 70% - For small arms, shell cases; deep drawn and spun parts; eyelet machine products.
Soft, 1/4 Hard, Half Hard
8′ Mill Lengths
Specifications:
CDA 260 AMS 4505, 4507 ASTM B19, B36
UNS C26000
Nominal Composition:
Copper 70% Zinc 30% |
| Plate - Leaded Brass (Clock Brass)
Leaded Brasses - Flat, stiff, free-cutting brass for blanking; clock, watch, and instrument frames; wheels and so on. Also used for engraving purposes.
Clock Brass
Half Hard
8′-10′ Mill Lengths
Specifications:
CDA 353 ASTM B121 UNS C35300
Nominal Composition:
Copper 65% Zinc 33% Load 2% |
| Plate - Muntz Metal
Cold Rolled to 3/8 Inch Thick
Hot Rolled From 1/2 to 3 Inch Thick
Specifications:
CDA 280 ASTM B36
UNS C28000
Nominal Composition:
Copper 60% Zinc 40% |
 | Round Brass Rod
Most versatile of many machinable alloys, high-speed, free-cutting brass rod permits fast screw machine operations without sacrifice of quality in the finished part and with minimum tool maintenance. Fills 90 percent of industry′s need for machining rod.
Also available in thread rolling, flanging temper and special tolerance for Swiss automatics.
High Speed - Free Cutting
12′ Mill Lengths (Sizes over 2′′ shipped Mill Random Lengths unless order specifies length)
Specifications:
CDA 360 AMS 4610 ASTM B16
UNS C36000
Nominal Composition:
Copper 61.5% Zinc 35.5% Lead 3.0% |
| Round Brass Rod - Low Leaded
Leaded Brasses - Flat, stiff, free-cutting brass for blanking; clock, watch, and instrument frames; wheels and so on. Also used for engraving purposes.
Low Leaded
For Thread Rolling and Flanging
Specifications:
CDA 353 ASTM B453 UNS C35300
Nominal Composition:
Copper 62% Zinc 36.2% Lead 1.8% |
| Hexagon Brass Rod
Most versatile of many machinable alloys, high-speed, free-cutting brass rod permits fast screw machine operations without sacrifice of quality in the finished part and with minimum tool maintenance. Fills 90 percent of industry′s need for machining rod.
Available with radius corner. Also available in thread rolling and flanging specifications.
Available with radius corner. Also available in thread rolling and flanging specifications.
High Speed - Free Cutting
12′ Mill Lengths
Specifications:
CDA 360 AMS 4610 ASTM B16
UNS C360O0
Nominal Composition:
Copper 61.5% Zinc 35.5% Lead 3% |
| Square Brass Rod
Most versatile of many machinable alloys, high-speed, free-cutting brass rod permits fast screw machine operations without sacrifice of quality in the finished part and with minimum tool maintenance. Fills 90 percent of industry′s need for machining rod.
High Speed - Free Cutting
12′ Mill Lengths
Specifications:
CDA 360 AMS 4610 ASTM B16
UNS C36000
Nominal Composition:
Copper 61.5% Zinc 35.5% Lead 3% |
| Rectangular Brass Bar
Most versatile of many machinable alloys, high-speed, free-cutting brass rod permits fast screw machine operations without sacrifice of quality in the finished part and with minimum tool maintenance. Fills 90 percent of industry′s need for machining rod.
High Speed - Free Cutting
12′ Mill Lengths
Specifications:
CDA 360 AMS 4610 ASTM B16
UNS C36000
Nominal Composition:
Copper: 61.5% Zinc: 35.5% Lead 3% |
 | Round Naval Brass Rod
Leaded Brasses - Flat, stiff, free-cutting brass for blanking; clock, watch, and instrument frames; wheels and so on. Also used for engraving purposes.
Naval Brass Rod - Made to U.S. Government specifications for marine construction. |
| Hex Naval Brass Rod
Leaded Brasses - Flat, stiff, free-cutting brass for blanking; clock, watch, and instrument frames; wheels and so on. Also used for engraving purposes.
Naval Brass Rod - Made to U.S. Government specifications for marine construction. |
| Round Leaded Commercial Bronze Rod
Leaded Brasses - Flat, stiff, free-cutting brass for blanking; clock, watch, and instrument frames; wheels and so on. Also used for engraving purposes.
Commercial Bronze, 90% - Rich bronze color. Resists season cracking and corrosion from weathering. For weather strip, costume jewelry, screw shells, primer cups; electric fixtures for outdoor use.
12′ Mill Lengths
Specifications:
CDA 314 ASTM B140
UNS C31400
Nominal Composition:
Copper: 89% Zinc: 9.1% Lead: 1.9% |
| Hex Leaded Commercial Bronze Rod
Leaded Brasses - Flat, stiff, free-cutting brass for blanking; clock, watch, and instrument frames; wheels and so on. Also used for engraving purposes.
Commercial Bronze, 90% - Rich bronze color. Resists season cracking and corrosion from weathering. For weather strip, costume jewelry, screw shells, primer cups; electric fixtures for outdoor use.
12′ Mill Lengths
Specifications:
CDA316 ASTM B140
UNS C31600
Nominal Composition:
Copper: 89% Zinc: 8.1% Lead: 1.9% Ni: 1% |
| Round Phosphor Bronze Rod
Leaded Brasses - Flat, stiff, free-cutting brass for blanking; clock, watch, and instrument frames; wheels and so on. Also used for engraving purposes.
Phosphor Bronzes - Excellent for spring contacts, for electronic and mechanical devices, diaphragms, instruments. Good fatigue and wear resistance.
Free Cutting - Most versatile of many machinable alloys, high-speed, free-cutting brass rod permits fast screw machine operations without sacrifice of quality in the finished part and with minimum tool maintenance. Fills 90 percent of industry′s need for machining rod. |
| Continuous Cast Bearing Bronze Round Solid Bar
Aluminum Bronze - Malleability, strength and good corrosion resistance to liquids and gasses make this alloy good for bolts and screw products, and components for pole line hardware.
105′′ Stock Lengths
Specifications:
UNS C93200 CDA 932 SAE 660
ASTM B505 (932)
Nominal Composition:
Copper: 83% Tin: 7% Lead: 7% Zinc: 3%
We will cut to any length. |
| Continuous Cast Bearing Bronze Hollow Round Bar
Aluminum Bronze - Malleability, strength and good corrosion resistance to liquids and gasses make this alloy good for bolts and screw products, and components for pole line hardware.
105′′ Stock Lengths
Specifications:
SAE 660 AMS None
ASTM B505 (932)
UNS C93200
CDA932
Nominal Composition:
Copper: 83% Tin: 7% Lead: 7% Zinc: 3%
We will cut to any length. |
| Round Aluminum Bronze Rod
Aluminum Bronze - Malleability, strength and good corrosion resistance to liquids and gasses make this alloy good for bolts and screw products, and components for pole line hardware.
12′ Mill Lengths
Specification:
CDA 642 ASTM B150
UNS C64200
Nominal Composition:
Copper: 91.2% Aluminum: 7%
Silicon: 1.8% |
| Aluminum Bronze Solid Round Bar
Aluminum Bronze - Malleability, strength and good corrosion resistance to liquids and gasses make this alloy good for bolts and screw products, and components for pole line hardware.
Applications: Recommended for heavier duty applications involving wear abrasion and fatigue, such as worm gears and wheels, adjusting nuts, collets, plungers, pump rods, sleeve bearings, valve and guide pin bushings. Aluminum bronze, in extruded and continuous cast rectangular bar, provides maximum metal-to-metal wear resistance for wear plates, guides, support trails, hold-down bars, gibs and wear, liners, fingers, straightening dies, racks, work rest blades, runout table slides, wear strips, shoes, mold inserts and scraper blades.
Standard Lengths: 144′′ and 72′′
Specifications:
CDA 954 ASTM B505
UNS 95400 |
 | Aluminum Bronze Plates, Squares and Rectangles
Aluminum Bronze - Malleability, strength and good corrosion resistance to liquids and gasses make this alloy good for bolts and screw products, and components for pole line hardware.
Applications: Recommended for heavier duty applications involving wear abrasion and fatigue, such as worm gears and wheels, adjusting nuts, collets, plungers, pump rods, sleeve bearings, valve and guide pin bushings. Aluminum bronze, in extruded and continuous cast rectangular bar, provides maximum metal-to-metal wear resistance for wear plates, guides, support trails, hold-down bars, gibs and wear, liners, fingers, straightening dies, racks, work rest blades, runout table slides, wear strips, shoes, mold inserts and scraper blades.
Standard Lengths: 144′′ and 72′′
Specifications:CDA 954 UNS 95400 |
| Aluminum Bronze Hollow Round Bar
Aluminum Bronze - Malleability, strength and good corrosion resistance to liquids and gasses make this alloy good for bolts and screw products, and components for pole line hardware.
Applications: Recommended for heavier duty applications involving wear abrasion and fatigue, such as worm gears and wheels, adjusting nuts, collets, plungers, pump rods, sleeve bearings, valve and guide pin bushings. Aluminum bronze, in extruded and continuous cast rectangular bar, provides maximum metal-to-metal wear resistance for wear plates, guides, support trails, hold-down bars, gibs and wear, liners, fingers, straightening dies, racks, work rest blades, runout table slides, wear strips, shoes, mold inserts and scraper blades.
Standard Lengths: 144′′ and 72′′
Specifications:CDA 954 ASTM B505 UNS 95400 |
 | Tube - Brass (Seamless)
Leaded Brasses - Flat, stiff, free-cutting brass for blanking; clock, watch, and instrument frames; wheels and so on. Also used for engraving purposes.
Commercial Temper Low Leaded
12′ Mill Length
Specifications:
CDA 330 AMS 4555 ASTM B135
UNS C33000
Nominal Composition:
Copper: 66% Zinc: 35.5% Lead: 0.5% |
| Pipe - 85% Red Brass
Red Brass, 85% - Fine golden color, very ductile. For vanities, jewelry, radiator cores, fire extinguishers.
Standard Pipe Size - Commercial Temper
12′ Straight Lengths Not Threaded
20′ Straight Lengths Available From Mil
Specifications:CDA 230 ASTM B43
UNS C23000
Nominal Composition:
Copper: 85% Zinc: 15% |
| Pipe - 85% Red Brass (Extra Heavy)
Red Brass, 85% - Fine golden color, very ductile. For vanities, jewelry, radiator cores, fire extinguishers.
Standard Pipe Size - Commercial Temper
12′ Straight Lengths Not Threaded
20′ Straight Lengths Available From Mil
Specifications:CDA 230 ASTM B43
UNS C23000
Nominal Composition:
Copper: 85% Zinc: 15% |
 | Round Beryllium Copper Rod - Alloy 25
Alloy 25 (UNS C17200) is the most commonly specified beryllium copper and is available in several wrought forms. In its age-hardened condition, Alloy 25 attains the highest strength and hardness of any commercial copper base alloy. The ultimate tensile strength can exceed 200 ksi, while the hardness approaches Rockwell C45. Also, in the fully aged condition, the electrical conductivity is a minimum of 22% IACS (International Annealed Copper Standard). Alloy 25 also exhibits exceptional resistance to stress relaxation at elevated temperatures.
12′ Random Lengths
Condition H (Hardened)
Specifications:CDA 172 ASTM B196
AMS 4650 UNS 17200
Nominal Composition:
Copper: 98.1% Beryllium: 1.9%
Also available in condition A (annealed). |
| Round Beryllium Copper Rod - Alloy M25
Alloy M25 (UNS C17300) offers the strength properties of Alloy 25 with the added benefit of being ′′free machining.′′ Alloy M25 rod and wire contain a small amount of lead to provide an alloy tailored for automatic machining operations. Lead promotes formation of finely divided chips, thus extending cutting tool life.
12′ Random Lengths
Condition H (Hardened)
Specifications:
CDA 173 ASTM B196
UNS C17300
Nominal Composition:
Copper: 97.7% Beryllium: 1.9% Lead: 0.4%
Also available in condition A (annealed). |
 | Stainless Steel Sheet and Coil - Type 316
Cold Rolled, Annealed No. 2B Finish
Can also be furnished:
No. 3 Finish - Polished One or Two Sides
No. 4 Finish - Polished One or Two Sides
Non-Magnetic (May be Slightly magnetic when cold worked)
Paper Interleaved or Vinyl Masked:
22 Gauge and Heavier
A.S.T.M. A240/A480 ASME SA-240
A.S.T.M. A262 Prac E |
| Stainless Steel Sheet and Coil - Type 316L
Cold Rolled, Annealed No. 2B Finish
Can also be furnished:
No. 3 Finish - Polished One or Two Sides
No. 4 Finish - Polished One or Two Sides
Non-Magnetic (May be Slightly magnetic when cold worked)
Paper Interleaved or Vinyl Masked:
22 Gauge and Heavier
A.S.T.M. A240/A480 ASME SA-240
A.S.T.M. A262 Prac E |
| Stainless Steel Sheet and Coil - Type 317L
Cold Rolled, Annealed No. 2B Finish
Can also be furnished:
No. 3 Finish - Polished One or Two Sides
No. 4 Finish - Polished One or Two Sides
Non-Magnetic (May be Slightly magnetic when cold worked)
Paper Interleaved or Vinyl Masked:
22 Gauge and Heavier
A.S.T.M. A480/A240 ASME SA-240
A.S.T.M. A262 Prac E |
| Stainless Steel Sheet and Coil - Type 430
Bright Annealed No. 2BA Finish
Cold-Rolled Annealed No. 2B Finish
Can also be furnished:
No. 3 Finish - Polished One or Two Sides
No. 4 Finish - Polished One or Two Sides
Rolled-on finish available on application.
Magnetic
Paper Interleaved or Vinyl Masked
A.S.T.M. A240/A480 ASME SA-240 |
| Stainless Steel Plate and Coil - Type 304
Hot Rolled, Annealed and Pickled
Non-Magnetic (May be slightly magnetic when cold-worked.)
A.S.T.M. A240/A480 A.S.T.M. A262 Prac E
ASME SA-240
Coils also may be custom leveled to your exact sizes.
Finish: Plates are available in #1 H.R.A.P.. 2B, #3, #4. Contact our sales department for sizes not shown. |
| Stainless Steel Plate and Coil - Type 304L
Hot Rolled, Annealed and Pickled
Non-Magnetic (May be slightly magnetic when cold-worked.)
A.S.T.M. A240/A480 A.S.T.M. A262 Prac E
ASME SA-240
Coils also may be custom leveled to your exact sizes.
Finish: Plates are available in #1 H.R.A.P.. 2B, #3, #4. Contact our sales department for sizes not shown. |
| Stainless Steel Plate and Coil - Type 304H
Hot Rolled, Annealed and Pickled
Non-Magnetic (May be slightly magnetic when cold-worked.)
A.S.T.M. A240/A480 A.S.T.M. A262 Prac E
ASME SA-240
Coils also may be custom leveled to your exact sizes.
Finish: Plates are available in #1 H.R.A.P.. 2B, #3, #4. Contact our sales department for sizes not shown. |
| Stainless Steel Plate and Coil - Type 316
Hot Rolled, Annealed and Pickled
Non-Magnetic (May be slightly magnetic when cold-worked.)
A.S.T.M. A240/A480 A.S.T.M. A262 Prac E
ASME SA-240
Coils also may be custom leveled to your exact sizes.
Finish: Plates are available in #1 H.R.A.P.. 2B, #3, #4. Contact our sales department for sizes not shown. |
 | Equal Legs Angle - Type 304
Hot Rolled, Annealed and Pickled
20′ Random Lengths A.S.T.M. A276
Most sizes also available in low carbon grade (304L, 316L) |
| Equal Legs Angle - Type 316
Hot Rolled, Annealed and Pickled
20′ Random Lengths A.S.T.M. A276
Most sizes also available in low carbon grade (304L, 316L) |
 | Seamless Stainless Steel Tube - Type 304
Welded and Seamless Cold Drawn, Annealed and Pickled
20′ Random Lengths
Specifications:
Seamless Tube ASTM A269 and A213.
Welded Tube ASTM A269 and A249.
Hollow Bar AMS 5639 (304 only) and ASTM A511 |
| Seamless Stainless Steel Tube - Type 316
Welded and Seamless Cold Drawn, Annealed and Pickled
20′ Random Lengths
Specifications:
Seamless Tube ASTM A269 and A213.
Welded Tube ASTM A269 and A249.
Hollow Bar AMS 5639 (304 only) and ASTM A511 |
| Welded Stainless Steel Tube - Type 304
Welded and Seamless Cold Drawn, Annealed and Pickled
20′ Random Lengths
Specifications:
Seamless Tube ASTM A269 and A213.
Welded Tube ASTM A269 and A249.
Hollow Bar AMS 5639 (304 only) and ASTM A511 |
| Stainless Steel Seamless Pipe - Type 304
Welded and Seamless Cold Drawn, Annealed and Pickled
20′ Random Lengths
Specifications:
Seamless Pipe Sizes - ASTM A312, A269 and MIL-P-24691/3
Welded Pipe Sizes - ASTM A312, MIL-P-1 144 and DuPont S.W.41M.
Most seamless pipe sizes are available cold-drawn and hot-finished. Most sizes-through 3/4′′ O.D. in both seamless and welded-meet Aircraft Quality Specifications MIL-T-8504, SAE-MIL-T-8506 |
| Stainless Steel Seamless Pipe - Type 304L
Welded and Seamless Cold Drawn, Annealed and Pickled
20′ Random Lengths
Specifications:
Seamless Pipe Sizes - ASTM A312, A269 and MIL-P-24691/3
Welded Pipe Sizes - ASTM A312, MIL-P-1 144 and DuPont S.W.41M.
Most seamless pipe sizes are available cold-drawn and hot-finished. Most sizes-through 3/4′′ O.D. in both seamless and welded-meet Aircraft Quality Specifications MIL-T-8504, SAE-MIL-T-8506 |
| Stainless Steel Seamless Pipe - Type 316
Welded and Seamless Cold Drawn, Annealed and Pickled
20′ Random Lengths
Specifications:
Seamless Pipe Sizes - ASTM A312, A269 and MIL-P-24691/3
Welded Pipe Sizes - ASTM A312, MIL-P-1 144 and DuPont S.W.41M.
Most seamless pipe sizes are available cold-drawn and hot-finished. Most sizes-through 3/4′′ O.D. in both seamless and welded-meet Aircraft Quality Specifications MIL-T-8504, SAE-MIL-T-8506 |
| Stainless Steel Welded Pipe - Type 304
Welded and Seamless Cold Drawn, Annealed and Pickled
20′ Random Lengths
Specifications:
Seamless Pipe Sizes - ASTM A312, A269 and MIL-P-24691/3
Welded Pipe Sizes - ASTM A312, MIL-P-1 144 and DuPont S.W.41M.
Most seamless pipe sizes are available cold-drawn and hot-finished. Most sizes-through 3/4′′ O.D. in both seamless and welded-meet Aircraft Quality Specifications MIL-T-8504, SAE-MIL-T-8506 |
| Stainless Steel Welded Pipe - Type 304L
Welded and Seamless Cold Drawn, Annealed and Pickled
20′ Random Lengths
Specifications:
Seamless Pipe Sizes - ASTM A312, A269 and MIL-P-24691/3
Welded Pipe Sizes - ASTM A312, MIL-P-1 144 and DuPont S.W.41M.
Most seamless pipe sizes are available cold-drawn and hot-finished. Most sizes-through 3/4′′ O.D. in both seamless and welded-meet Aircraft Quality Specifications MIL-T-8504, SAE-MIL-T-8506 |
| Stainless Steel Welded Pipe - Type 316L
Welded and Seamless Cold Drawn, Annealed and Pickled
20′ Random Lengths
Specifications:
Seamless Pipe Sizes - ASTM A312, A269 and MIL-P-24691/3
Welded Pipe Sizes - ASTM A312, MIL-P-1 144 and DuPont S.W.41M.
Most seamless pipe sizes are available cold-drawn and hot-finished. Most sizes-through 3/4′′ O.D. in both seamless and welded-meet Aircraft Quality Specifications MIL-T-8504, SAE-MIL-T-8506 |
| Stainless Steel Soft Coil and Sheet
This soft annealed stainless steel is used for thru-wall flashings, coping, parapets, sills, headers and other situations where a moisture barrier is needed. Its ease of forming and soldering make it ideal for these applications.
2D Mattie Finish Flashing Material |
| Titanium Plates Imperial - CP Grade 1
Lower Strength, softest, unalloyed Ti grade with highest ductility, cold formability, and impact toughness, with excellent resistance to mildly reducing to highly oxidixing media with or without chlorides and high weldability.
Ingot/Bloom, Bar, Billet, Plate, Strip, Welded Pipe/Tubing, Wire. |
| Titanium Plates Imperial - Grade 5 (6Al-4V)
Heat treatable, high-strength, most commercially available Ti alloy (′′workhorse′′ alloy for aerospace applications), for use up to 400ºC offering an excellent combination of high strength, toughness, and ductility along with good weldability and fabricability.
Ingot/Bloom, Bar, Billet, Plate, Sheet, Seamless Pipe/Tubing, Wire, Foil |
| Titanium Plates Imperial - CP Grade 7
Most resistant Ti alloy to corrosion in reducing acids and localized attack in hot halide media, with physical/mechanical properties equivalent to Grade 2 and excellent weldability/fabricability.
Ingot/Bloom, Bar, Billet, Plate, Strip, Welded Tubing/Pipe, Wire |
| Titanium Plates Imperial - Grade 23 (6Al-4V ELI)
Extra low interstitial version of Ti-6Al-4V offering improved ductility and fracture toughness in air and saltwater environments, along with excellent toughness, strength, and ductility in cryogenic service as low as -255ºC. Typically used in a non-aged condition for maximum toughness.
Ingot/Bloom, Bar, Billet, Plate, Sheet, Wire, Seamless Tubing, Foil |
| Titanium Plates Imperial - Grade 19
A heat-treatable, deep section hardenable, very high strength Ti alloy possessing good toughness/strength properties, low elastic modulus and elevated resistance to stress and localized corrosion in high temperature sweet and sour brines with exceptional hot-die forgeability, but limited weldability. Approved for sour service under the NACE MR-0175 Standard.
Ingot/Bloom, Bar, Billet, Seamless Pipe |
| Titanium Plates Imperial - Grade 6Al-6V-2Sn (6-62)
Heat treatable, high strength Ti alloy with higher strength and section hardenability than Ti-6Al-4V, but with lower toughness and ductility, and limited weldability. Can be used in mill annealed or in the aged (very high strength) condition.
Ingot/Bloom, Bar, Billet, Plate, Sheet |
| Titanium Plates Imperial - Grade 9 (3Al-2.5V)
Medium strength, non-ageable Ti alloy offering highest strength and design allowables under the pressure vessel code, with good weldability and cold fabricability for mildly reducing to mildly oxidizing media.
Ru-enhanced version of Ti-3Al-2.5V with equivalent physical and mechanical properties and fabricability, offering elevated resistance to dilute reducing acids and crevice corrosion in hot halide (brine) media. Approved for sour service use under the NACE MR-01-75 Standard.
Ingot/Bloom, Billet, Welded Pipe, Plate, Strip, Welded Tubing, Seamless Pipe, Wire |
| Titanium Plates Metric - CP Grade 1
Lower Strength, softest, unalloyed Ti grade with highest ductility, cold formability, and impact toughness, with excellent resistance to mildly reducing to highly oxidixing media with or without chlorides and high weldability.
Ingot/Bloom, Bar, Billet, Plate, Strip, Welded Pipe/Tubing, Wire. |
| Titanium Plates Metric - CP Grade 7
Most resistant Ti alloy to corrosion in reducing acids and localized attack in hot halide media, with physical/mechanical properties equivalent to Grade 2 and excellent weldability/fabricability.
Ingot/Bloom, Bar, Billet, Plate, Strip, Welded Tubing/Pipe, Wire |
| Titanium Plates Metric - Grade 6Al-2Sn-4Zr-2Mo (6-2-4-2)
Heat-treatable, deep hardenable, very high strength Ti alloy with improved strength to temperatures as high as 450ºC, with limited weldability. Approved for sour service under the NACE MR-01-75 Standard.
Ingot/Bloom, Bar, Billet |
| Titanium Plates Metric - Grade 6Al-6V-2Sn (6-62)
Heat treatable, high strength Ti alloy with higher strength and section hardenability than Ti-6Al-4V, but with lower toughness and ductility, and limited weldability. Can be used in mill annealed or in the aged (very high strength) condition.
Ingot/Bloom, Bar, Billet, Plate, Sheet |
| Titanium Plates Metric - Grade 8Al-1Mo-1V (8-1-1)
Highly creep-resistant, non-ageable, weldable, high-strength Ti alloy for use up to 455ºC; exhibiting the lowest density and highest modulus of all commercial Ti alloys.
Ingot/Bloom, Bar, Billet, Sheet |
| Titanium Plates Metric - Grade 9 (3Al-2.5V)
Medium strength, non-ageable Ti alloy offering highest strength and design allowables under the pressure vessel code, with good weldability and cold fabricability for mildly reducing to mildly oxidizing media.
Ru-enhanced version of Ti-3Al-2.5V with equivalent physical and mechanical properties and fabricability, offering elevated resistance to dilute reducing acids and crevice corrosion in hot halide (brine) media. Approved for sour service use under the NACE MR-01-75 Standard.
Ingot/Bloom, Billet, Welded Pipe, Plate, Strip, Welded Tubing, Seamless Pipe, Wire |
| Titanium Plates Metric - Grade 6 (5Al-2.5Sn)
Weldable, non-ageable, high-strength alloy offering good high temperature stability, strength, oxidation and creep resistance.
Extra low interstitial version of Ti-5Al-2.5Sn exhibiting an excellent combination of toughness and strength at cryogenic temperatures; suited for cryogenic vessels for service as low as -255ºC.
Ingot/Bloom, Bar, Billet, Sheet |
|
Tell your suppliers you found them on ThomasNet
