Conduits related categories
 | Heyco-Flex™ VI Light Duty Equipment/OEM Hose
- 3/8′′ thru 2′′ sizes.
- Extremely flexible PVC with a convoluted surface.
- Lightweight.
- Suitable for light duty drainage, air, vacuum gravity feed, and other equipment/OEM applications.
|
 | Heyco-Flex™ VII Braided Tubing
- 3/16′′ thru 2′′ sizes.
- Clear, flexible, reinforced PVC.
- Suitable for high working pressure under harsh conditions.
- For use in industrial applications, factory air lines, automation machinery, pneumatic lines, and water mains/feeds.
- For use with barb style hose connectors.
|
 | Heyco-Flex#8482; I Liquid Tight Conduit
Flexible, Nonmetallic Liquid Tight Electrical Conduit- 3/8′′ thru 2′′ trade sizes.
- Use with nylon Heyco-Flex Connectors; Snap-in, Straight or Sweep. See pages 0-18, 0-19, 1-20.
- May also be used with Heyco’s Die Cast Fittings for Liquid Tight Conduit. See page 0-23 or 0-24.
- Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
- Resists abuse, pull, and crushing.
- Temperature ratings : 80°C (203°F) DRY 70°C (160°F) OIL Resistance 60°C (140°F) WET locations
- Passes submersion test of 70 psi.
- Mounting brackets are available.
- Smooth inside for easier wire pulling; no hazardous sharp edges or burrs; will not damage conductors.
- Lightweight and lower installed cost.
- Quick installation; cuts with utility knife, PVC cutter or Heyco cutting tool (#8340).
- Integral rigid and flexible PVC construction.
- Suitable for indoor/outdoor use :
- HVAC Equipment
- Machine Tools
- Marine Equipment
- Motors and Controls
- Printing Equipment
- Pumps
- Refrigeration Equipment
- Approved for direct burial. - Order Part No. 8340, VF-28 Cutting Tool, for cutting Heyco-Flex conduit and tubing cleanly and evenly.
|
 | Heyco-Flex™ II Liquid Tight Tubing
Flexible, Nonmetallic Liquid Tight Electrical Conduit- 1/4′′ thru 2′′ trade sizes.
- Use with nylon Heyco-Flex Connectors: Snap-in, Straight or Sweep.
- May also be used with Heyco Die Cast Metal Fittings for Liquid Tight Tubing.
- Resists corrosion, oil, and water.
- Maximum flexibility; can be used in extremely tight quarters.
- Temperature rating 70°C (160°F).
- Smooth inside for easier wire pulling.
- Lightweight and lower installed cost.
- Quick installation; cuts with utility knife, PVC cutter or Heyco cutting tool (#8340).
- Integral rigid and flexible PVC construction.
- Ideal for fiber optic cable protection.
- Suitable for use in high vibration or flexing applications :
- Automotive Equipment
- Computers and Peripherals
- Fiber Optics
- Lab Equipment
- Lasers
- Office Equipment
- Processing Control and
- Monitoring Equipment
- Robotics
- White Goods
- Passes submersion test of 70 psi.
- Mounting brackets are available,
- Order Part No. 8340, VF-28 Cutting Tool, for cutting Heyco-Flex tubing and hoses cleanly and evenly.
|
 | Heyco-Flex™ V Slit Tubing
- Thirteen sizes 1/8′′ to 1 1/2′′.
- Slit design allows side entry and encirclement of pre-assembled harnesses and capillary tubes.
- All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents.
- Heyco-Flex V is lightweight and flexible, yet durable enough to meet your wire management requirements.
- Unique slit design allows for wire breakouts.
- Quick installation; cuts with utility knife, PVC cutter or Heyco cutting tool #8340.
- Consult Heyco for slit tubing cut to length.
- Material : Polyamide 6 “Nylon” .
- Flammability Rating : 94HB.
|
|
Click to Call
Tell your suppliers you found them on ThomasNet
