Conveyors: Chain related categories
 | Chain & Pad Driven Live Roller Conveyor
The new Logistex CP200 chain and pad driven roller conveyor provides quiet, positive transportation and zero pressure accumulation of product. For accumulation the Logistex CP200 utilizes a proven pad-on-chain roller drive principle to achieve high throughput rates at minimal noise levels. Built-in zone control modules build a queue of products while progressively dropping drive from the rollers, eliminating line pressure. Using the Logistex ZC200 zone control platform, the Logistex CP200 provides a versatile solution suitable for any system product accumulation requirement. The Logistex ZC200 zone control also provides seamless integration of the Logistex CP200 with other Logistex Case Conveyor Solutions.
For simple transportation, the Logistex CP200 can operate at speeds up to 183 m/min (602 ft/min). Similar in construction to the accumulation style, transportation conveyor can be easily upgraded to zero pressure accumulation.
The ability of the Logistex CP200 to fully integrate curve sections into a single conveyor reduces drive package requirements in a system, supporting energy efficiency and reducing overall cost of ownership.
A cohesive family of conveyor for case, package, tote, and tray handling, Logistex Case Conveyor Solutions provide exceptional performance, superior reliability, and industry-leading throughput rates. Designed to reduce maintenance and operational costs, Logistex Case Conveyor Solutions are easy to maintain, require minimal tools and spare parts, and incorporate the latest energy-saving technologies. |
 | Chain Driven Live Roller Conveyor
Wash down operationsOily conditionsPositive drive – no belt slippage
Drive Chain – No. 40 roller chain on straight sections.
Bed – 3 1/2′′ x 1 1/2′′ x 10 gauge powder painted formed steel channel on one side, 5′′ x 1 1/2′′ x 10 gauge formed steel channel on chain drive side. Sections are bolted together with butt couplings and floor supports.
Tread rollers – 2′′ diameter x 12 gauge steel with #40 sprockets welded to roller tube, 7/16′′ hex shafts. Rollers spaced on 4′′, 6′′, 8′′ and 12′′ centers. Rollers are roller to roller driven.
Chain guard – Chain guard is mounted to frame to totally enclose drive chain.
Center drive – Mounted underneath conveyor, near center of section. Can be placed most anywhere in conveyor length. Specify.
Floor supports – Adjustable 28′′ to 42′′ from floor to top of rollers. One support supplied at each end of conveyor and at each bed joint.
Speed reducer – C-face mounted heavy duty worm gear reducer
Capacity – Maximum load 150 Ibs. per foot; maximum unit load 500 pounds. Not to exceed Load capacity. |
 | Accuglide Chain and Pad Driven Accumulation Conveyor
The FKI Logistex Accuglide powered roller conveyor provides quiet, positive transportation and zero-pressure accumulation of cartons, totes, etc. in accumulation lines that may include both straight and curve sections. Accuglide is available with operational modes that allow for maximum output at the lowest possible speed, and integrates 24-volt photo-eye sensors with zone control modules to optimize product detection and flow.
The integration of 24-volt photo-eye sensors and zone control modules into Accuglide’s design provides the following benefits:
Easy zone control/power connectionsQuick and easy conveyor release mode configurationSections delivered ready to install and run (sensors/control modules)Micro connector power/communication connectionsSafe low-voltage power supply requirementsPhoto-eyes factory installed and alignedRelease rates available up to 95 %Acceptance rates up to 100 %Quiet non-contacting sensorsNo product minimum weight limitationProduct minimum height 25 mm (1 in)
Simple, efficient roller chain (RC50 w/extended pins) and urethane driver pad are pneumatically raised to engage and power the carrier rollers. They are lowered to disengage power from the rollers when sensors detect the presence of product within the next downstream zone. |
 | Chain Driven Accumulation Conveyor
Medium weight palletsDrum filling operationsLarge carton accumulationHandles product on slip sheetsPhoto eye controlled
Bed – Conveying surface width 14′′, 16′′, 18′′, 24′′, 28′′, and 34′′. 5 1/2′′ x 1 1/2′′ x 10 gauge powder painted formed steel channel both sides. Sections are bolted together with butt couplings and floor supports.
Tread rollers – 2′′ diameter x 12 gauge steel rollers with #40 sprockets welded to roller tube, 7/16′′ hex shaft. Rollers spaced on 4′′, or 6′′ centers, set low 1 1/2′′. Roller to roller driven.
Drive – Located near center of conveyor length, under conveyor frame.
Drive chain – RC #40 for roller to roller connections, RC #50 chain drive for each zone. Chains are totally enclosed by metal guards.
Floor supports – 28′′ to 42′′ adjustable from floor to top of rollers. One support supplied at each end of conveyor and at each bed joint.
Accumulation zones – Standard zone lengths are 24′′, 30′′, and 36′′ with a maximum of 30 zones per drive. Conveyor frame lengths change with zone lengths and zone length must be divisible by roller centers. Each zone is driven by an air clutch and controlled by a photo eye sensor.
Sensing device – NEMA 1 photo electric sensor in each zone detects product presence and activates accumulation feature in trailing zone if upstream zone is occupied.
Power supply – 120 VAC power supply controls accumulation feature with 24 VDC output. Power supply will control 50 accumulation zones.
Air requirements – 30 PSI minimum.
Filter/Regulator – Mounted to conveyor side frame. 50 PSI recommended operating pressure with free air consumption of .001 cu. ft. per sensor operation.
Capacity – 250 pounds per foot; maximum unit load 1000 lbs. Not to exceed Load capacity. |
 | Air Operated Chain Transfer
Chain – Two strands of #60 high side bar roller chain; min. 10′′ chain centers.
Mounting – Designed to install in standard ′′251CRR′′ frames.
Cycles – Up to 4 cycles per minute.
Air requirements – Min. pressure 60 psi, max. pressure 125 psi. Free air consumption at 60 psi .035 cu. ft. per cycle.
Electrical requirements – 120 V, single phase, 60 Hz. Current draw - .07 amps or 24 VDC.
Electrical controls – None furnished as standard.
Installation note: To eliminate contaminants in air supply line, a filter, regulator (FR) should be installed prior to valve. |
|
Tell your suppliers you found them on ThomasNet
