Vision Series Lift Tables Designed from the ground up, Vision lifts incorporate design features
that provide unequaled quality, performance and safety. Vision lifts
increase productivity and reduce worker strain in today’s harsh industrial environments. By lifting
and accurately positioning the load, Vision lifts eliminate unproductive lifting and stretching that
ultimately leads to worker fatigue and injuries.
Standard Features
Complies with ANSI standards for lift tables
Integral base frame sensor for safety compliance when the platform does not exceed the base
frame size by 5.90 in. (150 mm) per side, a current CE requirement
24 volt operator control system
Rugged construction with high strength structural steel components and welds
Unitized, compact, internal power unit and reservoir combination
Pressure compensated flow control at power unit
Flow limiting valve at each cylinder
Maintenance friendly control box houses all electrical components
Self-lubricating, maintenance free bushings at all pivot points
Large heavy-duty torque tube with continuous center axle
Continuous axles at rollers and removable hinge blocks at hinges
Heavy duty cylinder(s) with chrome plated cylinder rod(s) and premium seals
LX Series Lift Tables LoProfile™ lift tables provide lifting power from a very low elevation. This low collapsed height
provides easy access for pallet jacks, 4 - wheeled carts and other devices requiring low profile.
The LoProfile™ is also an excellent choice for conveyor transfer.
Standard Features
Extremely low collapsed heights of 2.9” to 4.3” provides access for rolling products, carts or
pallet trucks
Electric full-perimeter toe guard around the platform provides optimum operator safety
Heavy-duty construction with captured scissor rollers for maximum stability
Remote power unit with hand held control
24V operator control voltage
High performance external electro-hydraulic power unit
Durable steel braided hydraulic hose
Optional Accessories
Foot operated control with guard
Approach ramp
Pallet truck approach ramp
LIFT2K Series Lift Tables The Lift2K® & Lift25K® are the best value 2000 & 2500lb. capacity lift tables on the market.
They have a maximum lifting height of 39.25 in. with platform sizes of 28 x 48 and 36 x 48 in.
No matter how you compare it, Lift2K® & Lift25K® lifts more for less. They are designed to
increase productivity and reduce worker strain. By lifting and accurately positioning the load,
they eliminate unproductive lifting and stretching that ultimately leads to worker fatigue,
injuries, and product damage.
Standard Features
Unparalleled price and value
Complies with ANSI MH 29.1-2003 “Safety Requirements For Industrial Scissor Lifts”
Flow limiting valve at cylinder
Heavy duty hand control rated for 115V operation
Heavy duty unitized power unit operates on a standard household 115 volt outlet
Pressure compensated flow control at power unit
3” bore cylinder provides low pressure operation
See through reservoir for easy fluid level identification
EZ-UP Series Lift Tables EZU Series Pneumatic Lift Tables are the convenient way to use air to raise, lower, and
position a load. Pneumatic lifts contain no electrical or hydraulic components. They require
little maintenance and provide the ideal tool where cleanliness is a must and where sparks
can be hazardous.
Standard Features
Firestone Airstroke Actuator raises and lowers the table platform to vertically position the
load to the desired height
Durable and attractive polyester powder coating adds life and superior corrosion
resistance to the finish
Heavy-duty structural steel construction with rugged base frame
Entrapped rollers on base and platform for added stability
Dual attached maintenance blocks
High quality brass hand lever controls allows easy operation
Clean design with minimum of maintenance needed
Fork truck transportable without the need for additional options
Optional Accessories
Rotator Ring Brake
Accordion Bellows Skirting
Semi-Live Portability
Oversize Platform (Non-Rotating) up to 48” x 72” For Surface Mounting Only
Note: Not recommended for applications requiring exact positioning of work loads.
X Series Lift Tables X-Series Scissor Lift Tables are rugged, compact hydraulic lifts with capacities of 440 to 1,650 lbs.,
travel distance up to 45 in. and platform sizes from 18 x 25.5 to 20 x 40 inches.
X Series CompacLift™ tables are most widely used in machine tool or other production line
manufacturing activities requiring heavy-duty lifting and positioning within a confined area. With
additional emphasis placed on ergonomics and the reduction of repetitive lifting activities. The XSeries
meets an ever-growing need for lifting assistance. Basic design features a manual foot pump operation to afford the opportunity of economical solutions to lifting problems.
Electric/Hydraulic and Air/Hydraulic units are also available in most capacities.
Standard Features
Compact design
440 to 1,650 lbs. capacities
Rugged construction with heavy gauge steel and sturdy continuous welds throughout
Steel work platforms
Superior hydraulic systems proven on a range of Bishamon lift products
Hand control on electric models
Wide range of table sizes
Removable & storable operator’s foot pedal and lowering control on basic models
Tell your suppliers you found them on ThomasNet
