BridgeMont Heavy Duty, BMS-XL Series Truck Scale   
Steel Deck, Flat Top, Motor Truck Scale
Legal For Trade CC #97-074, Class IIIL 10,000 Divisions
BMS-XL Series Truck Scale includes: 50′ interface cable, junction boxes, platform ground wires with clamps, surge protection for Weigh Bars® and junction box, and AC line protection for indicator. Interface cable and all Weigh Bar cable is stainless steel sheathed. The BMS-XL series truck scale arrives at the installation site in pre-assembled 25′ sections. Weigh Bars, junction boxes and cables are factory calibrated. Final truck scale assembly must be done in the field. Final calibration of electronics must be done after the truck scale decks have been installed. The 10′ platform width is actually 9 ft.-10 1/2 in. to fit most existing 10′ pit openings. The BMS-XL Series truck scales have a concentrated load capacity (CLC) and dual tandem axle capacity (DTA) of 90,000 lb (45,000 kg). The “r” factor rating is 2.65 on all sizes. Certified as legal-for-trade up to 14′ wide.

ProDec Floor Scale
DSL Series Low Profile,
Four-Way Deck Access - Less Indicator
Legal For Trade CC# 90-132 Class III 5,000 Divisions
Floor Scale Includes: Painted safety tread deck, epoxy painted weight sensors, built-in easy access, gasketed junction box, 25′ interface cable, and platform lifting eyes

3600 Series Bench Scales
QDT Bench Scales
Legal for trade CC# 95-071 Class lll 10,000 divisions, Class ll 11,000 divisions

3600 Series QDT Bench Scales are constructed of either a die cast aluminum body and stainless steel shroud (3632B models) or a mild steel body and stainless steel shroud (3634B models.) Bench scales include a front-mounted, seven digit, liquid crystal display with blue electro-luminescent back light and RS-232 interface. Six-foot power cord included.  

Model 3700LP Bench Scale
Legal-for-Trade COC# 02-069, Class III, 5000 divisions

The Weigh-Tronix Model 3700LP Bench Scales are constructed of an aluminum or mild steel body with a stainless steel shroud. Each bench scale model includes a six digit, seven segment LCD display with backlight and all are equipped with RS232. The front panel overlay includes UNITS, PRINT, & ZERO keys and supports switching of up to 2 units of measure selected from lb, kg, oz and g. Built in serial protocols include formats for NCI standard, model 3835, 8213 emulation and also for the WP-233 lister and Zebra 2844 label printers. Autoprint is also selectable. Each comes with a front mount display bracket. Bench scales can be purchased with or without a factory installed battery (battery not available on 3730LP 10′′ x 10′′ model).

TT-830 Solution Series Bench Scale
Legal-for-Trade CC# 00-121

The TableTop 830 Solution Series Bench Scale is an application adaptable instrument and a high resolution Quartzell base all in one assembly. The bench scale arrives in its simplest form, ready to weigh in pounds or kilograms and transmits serial formatted weight information when pressing Print. A customer defined application program can be created and imported by you to meet exact operational routines. Hardware features include a back-lit white on blue 240 x 64 dot matrix display, tactile feedback keys with audio verification, battery protected time and date, two serial ports (one can be interfaced to a remote QDT base), supports 32 remote OPTO 22 I/O devices and has a resilient polycarbonate top shroud.

CVC – Carbon Steel Conveyor Scale – Less Indicator
Not Legal for Trade
The conveyor scale allows a single-product to be weighed while in motion. The assembly is constructed of carbon steel with a flush grid acetal belt, photoelectric cell, junction box and 25′ interface cable. The drive motor is priced separately. The conveyor scale is available in a variety of lengths, widths, and speeds. Two capacities are available. Please specify belt speed. Belt speeds from 30 to 220 fpm are available.

CVCS - Stainless Steel Conveyor Scale - Less Indicator
Not Legal for Trade
The conveyor scale allows a single product to be weighed while in motion. The assembly is constructed of stainless steel with a USDA accepted flush grid acetal belt, photoelectric cell, junction box and 25′ interface cable. The drive motor is priced separately. The conveyor scale is available in a variety of lengths, widths and speeds. Two capacities are available. Please specify belt speed. Belt speeds from 30 to 220 fpm are available.

ProDec Floor Scale
Stainless Steel Low Profile,
Four-Way Access Deck Scale-Less Indicator
Legal For Trade CC# 90-132 Class III 5,000 Divisions
Floor Scale Includes: stainless steel construction, stainless steel Weigh Bars, built-in easy access, stainless steel junction box, 25′ interface cable, and platform lifting eyes.

Model FCQH Floor Scale
Hinge Top Floor Scale
Legal for trade CC# 03-003 Class III 5,000 divisions.
The Weigh-Tronix Model FCQH Hinge Top Floor Scale features complete stainless steel construction on all critical components including the junction box, hinges, and struts. The (4) stainless steel, hermetically sealed Weigh Bars® come with approximately 20 ft of cable to interface with the remote stainless steel junction box. A 25 ft interface cable with tinned ends is included from the remote junction box to the indicator.

Model FCQS Floor Scale
Stainless Steel Floor Scale
COC #02-070 Class III 5,000 divisions.
The Weigh-Tronix Model FCQS Stainless Steel Floor Scale features complete stainless steel construction on all critical components. It includes (4) stainless steel, hermetically sealed shear beam load cells and a stainless steel junction box. A 25 ft interface cable with tinned ends is included from the junction box to the indicator.

LP Series, Low Profile Floor Scale Platforms – Less Indicator
Legal for Trade CC# 88-222 Class III 5,000 Divisions
LP series floor scale, less indicator includes: Painted deck with NEMA 4 cast aluminum gasketed junction box and 25′ interface cable. To Order: Specify model, number of ramps and options.

Cargo Scales
Weigh-Tronix Cargo Scales were originally designed for the air cargo industry but can be adapted for use in all kinds of applications. Weigh -Tronix makes three different versions of these cargo scales; the Pancake Scale, Dual Roller Scale and the Swivel Caster Scale. All three scales employ Weigh-Tronix′ patented Weigh Bars® for maximum accuracy and durability. Please refer to Cargo Scale spec sheet for additional information on these scales. For custom applications to fit specific individual requirements, please contact Weigh-Tronix for an RFQ.

PANCAKE SCALE
Legal for trade CC# 90-132, Class III 5,000 divisions
The Pancake Scale is a 20,000 lb. capacity multi-purpose low profile scale designed for indoor or outdoor use. It has dimensions of 120′′L x 120′′W x 4′′H and features wrap around ramps for easy access from all sides. Side ramps are 15′′ long with a 15° slope. End ramps are 36′′ long with a gentle 6° slope. It employs (4) 5,000 lb Weigh Bars and features textured tread plate for extra traction in wet areas and comes with 30′ of interface cable to the remote stainless steel junction box.

Note: The Pancake Scale can be ordered with or without ramps.

DUAL ROLLER SCALE
The Dual Roller Scale fits single or double wide aircraft cargo containers. It has dimensions of 100′′ L x 132′′ W x 20′′ H (± 2′′) and consists of (2) separate platforms, with a 27′′ wide non-skid walkway between them. Each platform has (4) 2,500 lb. Weigh Bars for a total capacity of 10,000 lbs per platform and can be displayed individually or summed together to a single display. Capacity: 20,000 lb (10,000 kg); 10,000 lbs per platform

SWIVEL CASTER SCALE
The Swivel Caster Scale employs (104) 360° heavy duty swiveling casters to allow loading and unloading of cargo in any direction. It has dimensions of 131′′ L x 107′′ W x 21′′ H (± 2′′) with (4) 5,000 lb. Weigh Bars for a total capacity of 20,000 lbs.

PFS 2418-01
Portable Floor Scale
The PFS floor scale is a portable deck scale designed to interface with the Weigh-Tronix Model PC-820 Dual Counting Scale. The PFS floor scale comes standard with a 12” x 14” platform with pre-drilled holes to mount a battery operated PC- 820-Dual Counting Scale (or an indicator). It includes (4) rubber bumpers with nuts to hold the PC-820 in place and a DB9 connector to interface with the PC-820. There are also (4) additional pre-drilled holes designed to mount a BP-25R Battery Pack for extended battery operation.

Drum Weigher Scale
DW Series Scale – Two-Way Access Scale – Less Indicator
Legal for Trade CC# 93-130, Class III 5,000 Divisions
The DW Series scale is the high grade powder paint finish carbon steel version of the Drum Weigher Scale. The live weighing area is 30′′ X 30′′ and has a tread plate surface for improved safety and durability. The side rails are live and useful in weighing products that extend beyond the weighing area. The standard product includes two access ramps and a 25′ interface cable or a 6′ interface cable when ordered with an indicator post. The highest elevation of the weighing platform is 1½′′ from ground surface. A gasketed junction box sums the four Weigh Bar weight sensors and provides a quick interface cable termination. The Drum Weigher scale has Factory Mutual approval and 100% end loading capability.

BridgeMont Heavy Duty, BMC Series Truck Scale
Concrete Deck, Flat Top, Motor Truck Scale
Legal For Trade CC #97-074, Class IIIL 10,000 Divisions
BMC Series Truck Scale includes: 50′ interface cable, junction boxes, platform ground wires with clamps, surge protection for Weigh Bars® and junction box, and AC line protection for indicator. Interface cable and all Weigh Bar cable is stainless steel sheathed. The BMC series truck scale arrives at the installation site in pre-assembled sections. Weigh Bars, junction boxes and cables are factory calibrated. Final truck scale assembly must be done in the field. Final calibration of electronics must be done after the concrete deck has cured. The 10′ platform width is actually 9 ft.-10 1/2 in. to fi t most existing 10′ pit openings. The BridgeMont Heavy Duty, BMC Series truck scales have a concentrated load capacity (CLC) and dual tandem axle capacity (DTA) of 90,000 lb (45,000 kg). The “r” factor rating is 2.65 on all sizes. Certified as legal-for-trade up to 14′ wide.

BridgeMont Heavy Duty, BMS-HD Series Truck Scale
Steel Deck, Flat Top, Motor Truck Scale
Legal For Trade CC #97-074, Class IIIL 10,000 Divisions
BMS-HD Series Truck Scale includes: 50′ interface cable, junction boxes, platform ground wires with clamps, surge protection for Weigh Bars® and junction box, and AC line protection for indicator. Interface cable and all Weigh Bar cable is stainless steel sheathed. The BMS-HD series truck scale arrives at the installation site in pre-assembled sections. Weigh Bars, junction boxes and cables are factory calibrated. Final truck scale assembly must be done in the field. Final calibration of electronics must be done after the steel decks have been installed onto the truck scale. The 10′ platform width is actually 9 ft.-10 1/2 in. to fit most existing 10′ pit openings. The BridgeMont Heavy Duty, BMS-HD Series truck scales have a concentrated load capacity (CLC) and dual tandem axle capacity (DTA) of 90,000 lb (45,000 kg). The “r” factor rating is 2.65 on all sizes. Certified as legal-for-trade up to 14′ wide.

BridgeMont Standard Duty, BMS-SD Series (formerly BMS-75) Truck Scale
Steel Deck, Flat Top, Motor Truck Scale
Legal For Trade CC #97-074, Class IIIL 10,000 Divisions
The BridgeMont Standard Duty Truck Scale is designed for applications with moderate traffic and legal highway axle loads. If the truck scale is installed in a pit foundation, traffic should be straight on and straight off the scale. BMS-SD Series truck scale includes: 50′ interface cable, junction boxes, platform ground wires with clamps, surge voltage protection for Weigh Bars® and junction box, and A/C line protection for indicator. The truck scale arrives at the installation site in pre-assembled sections. Weigh Bars, junction boxes and cables are factory calibrated. Final truck scale assembly must be done in the field. Final calibration of electronics must be done after the steel decks have been installed onto the truck scale. The 10 ft. platform width is actually 9 ft.-10 1/2 in. The BridgeMont Standard Duty, BMS-SD Series truck scales have a concentrated load capacity (CLC) and dual tandem axle capacity (DTA) of 70,000 lb (35,000 kg). The “r” factor rating is 2.06 on all sizes.

BridgeMont Heavy Duty, BMS Low-Pro 8 Series Truck Scale
Steel Deck, Flat Top, Motor Truck Scale
Legal For Trade CC #97-074, Class IIIL 10,000 Divisions
BMS-LP8 Series Truck Scale includes: 50′ interface cable, junction boxes, platform ground wires with clamps, surge protection for Weigh Bars® and junction box, and AC line protection for indicator. Interface cable and all Weigh Bar cable is stainless steel sheathed. The BMS-LP8 series truck scale arrives at the installation site in pre-assembled sections. Weigh Bars, junction boxes and cables are factory calibrated. Final system calibration must be performed after the decks are installed onto the truck scale. The BridgeMont Heavy Duty, BMS-LP8 Series truck scales have a concentrated load capacity (CLC) and dual tandem axle capacity (DTA) of 80,000 lb (40,000 kg) with an “r” factor rating of 2.35 on all sizes. The highstrength weighbridge features 60K Weigh Bars and 100% welded, sandwich construction.

SteelBridge XT Extreme Duty, FCXT Series Truck Scale
Concrete Deck, Flat Top, Motor Truck Scale
Legal For Trade CC# 98-040
FCXT Series Truck Scale includes: 50′ interface cable, junction boxes, platform ground wires with clamps, surge protection for Weigh Bars®, and AC line protection for indicator. Interface cable and all Weigh Bar cable is stainless steel sheathed. The FCXT series truck scale arrives at the installation site in pre-assembled sections. Weigh Bars, junction boxes and cables are factory calibrated. Final truck scale assembly must be done in the field. Final calibration of electronics must be done after the concrete decks have cured. The 10′ platform width is actually 9 ft.-10 1/2 in. to fit most existing 10′ pit openings. The FCXT Series truck scales have a concentrated load capacity (CLC) and dual tandem axle capacity (DTA) of 90,000 lb (45,000 kg). The “r” factor rating is 2.65 on all sizes.

SteelBridge XT Extreme Duty, IMXT Series Truck Scale
Steel Deck, Flat Top, Motor Truck Scale
Legal For Trade CC# 98-040
IMXT Series Truck Scale includes: 50′ interface cable, junction boxes, platform ground wires with clamps, surge protection for Weigh Bars®, and AC line protection for indicator. Interface cable and all Weigh Bar cable is stainless steel sheathed. The IMXT series truck scale arrives at the installation site in pre-assembled sections. Weigh Bars, junction boxes and cables are factory calibrated. Final truck scale assembly must be done in the field. Final calibration of electronics must be done after the steel decks have been installed onto the truck scale. The 10′ platform width is actually 9 ft.-10 1/2 in. to fit most existing 10′ pit openings. The IMXT Series truck scales have a concentrated load capacity (CLC) and dual tandem axle capacity (DTA) of 90,000 lb (45,000 kg). The “r” factor rating is 2.65 on all sizes.

Self-Contained, Low Profile, Portable Vehicle/Truck Scales
Including BridgeMont Heavy Duty: BMS-P & BMS-DT-P Series Truck Scale
Steel Bridge XT: IMXT-P Series Truck Scale
BMS-P model vehicle/truck scale includes: One pair of c-channel, bolt-on bulkheads, 50′ interface cable, junction boxes, platform ground wires with clamps, surge protection for Weigh Bars® and junction box, and AC line protection for indicator. Interface cable and all Weigh Bar cable is stainless steel sheathed. The BMS-P truck scale modules arrive at the installation site on a robust steel frame. Lock down bolts are provided for transit. The BMS-P truck scale installs on any stable and suitable surface. Weigh Bars, junction box(s) and cables are factory calibrated. Final calibration of electronics must be done after the modules have been installed onto the truck scale. The BMS-P Series portable truck scales have a concentrated load capacity (CLC) and dual tandem axle capacity (DTA) of 80,000 lb. (40,000kg). The “r” factor rating is 2.35 on all sizes. The weighbridge features 60K Weigh Bars and EasiPost suspension.

BMS-P: 10 ft. width, 19 in. profile
Legal For Trade CC# 97-074, Class IIIL 10,000 Divisions

BMS-DT-P Truck Scale: 11 ft. width, 19 in. profile
Legal For Trade CC# 97-074, Class IIIL 10,000 Divisions
BMS-DT-P model truck scale includes: One pair of c-channel, bolt-on bulkheads, 50′ interface cable, junction boxes, platform ground wires with clamps, surge protection for Weigh Bars® and junction box, and AC line protection for indicator. Interface cable and all Weigh Bar cable is stainless steel sheathed. The BMS-DT-P truck scale modules arrive at the installation site on a robust steel frame. Lock down bolts are provided for transit. The BMS-DT-P truck scale installs on any stable and suitable surface. Weigh Bars, junction box(s) and cables are factory calibrated. Final calibration of electronics must be done after the modules have been installed onto the truck scale. The BMS-DT-P Series portable vehicle scales have a concentrated load capacity (CLC) and dual tandem axle capacity (DTA) of 80,000 lb. (40,000kg). The “r” factor rating is 2.35 on all sizes. The weighbridge features 60K Weigh Bars, EasiPost suspension and 3/16′′ bottom plates for extra durability.  h, 19 in. profile

Legal For Trade CC# 98-040, Class IIIL 10,000 Divisions
IMXT-P model truck scale includes: One pair of c-channel, bolt-on bulkheads, 50′ interface cable, junction boxes, platform ground wires with clamps, surge protection for Weigh Bars® and junction box, and AC line protection for indicator. Interface cable and all Weigh Bar cable is stainless steel sheathed. The IMXT-P truck scale modules arrive at the installation site on a robust steel frame. Lock down bolts are provided for transit. The IMXT-P truck scale installs on any stable and suitable surface. Weigh Bars, junction box(s) and cables are factory calibrated. Final calibration of electronics must be done after the modules have been installed onto the truck scale. The IMXT-P Series portable vehicle scales have a concentrated load capacity (CLC) and dual tandem axle capacity (DTA) of 90,000 lb. (45,000kg). The “r” factor rating is 2.65 on all sizes. The weighbridge features 60K Weigh Bars and pin/link suspension.  

BPV Series- BridgePort Truck Scale
Self-Contained Low Profile Portable Vehicle/Truck Scale
Legal For Trade CC# 98-207, Class IIIL 10,000 Divisions
BPV Series Truck Scale includes: AC line protection, 3/8′′ checkered steel deck, 50′ interface cable and junction box. Interface cable and all Weigh Bar® cable is stainless steel sheathed. Also included are platform ground wire with clamps. Multi-module units include a T-gap cover for each internal junction between truck scale modules. Surge protection is standard for junction boxes and Weigh Bars. The BPV series truck scale arrives at the installation site in a robust tubular steel frame. Lock down bolts are provided for transit. The BridgePort truck scale installs on any stable and suitable surface. Weigh Bars, junction boxes and cables are factory calibrated. Final calibration of electronics must be done after the scale decks have been installed onto truck scale. All BPV Series truck scales have a concentrated load capacity (CLC) and dual tandem axle capacity (DTA) of 80,000 lb (40,000 kg). The “r” factor rating is 2.35 on all sizes.