Standoffs related categories
 | Keyhole® Self-Clinching Standoffs Type SKC - Unified
PEM® KEYHOLE® Standoffs (Type SKC™) is designed so that a PC board or panel can be
quickly slipped into place and then removed from an assembly by simply sliding the board sideways and lifting it off. Type SKC can be used for spacing
or hanging of replaceable components. Typically, several SKC standoffs are used with one standard PEM threaded standoff which
accepts a screw to secure the board or component against any unwanted movement.
Type SKC - Allows detachable spacing of two sheets
Clinch feature mounts fastener permanently into metal sheet.
Unique barrel design allows for quick attachment and detachment.
Head is flush with one side of metal sheet.
Makes horizontal or vertical component mounting possible. |
| Keyhole® Self-Clinching Standoffs Type SKC - Metric
PEM® KEYHOLE® Standoffs (Type SKC™) is designed so that a PC board or panel can be
quickly slipped into place and then removed from an assembly by simply sliding the board sideways and lifting it off. Type SKC can be used for spacing
or hanging of replaceable components. Typically, several SKC standoffs are used with one standard PEM threaded standoff which
accepts a screw to secure the board or component against any unwanted movement.
Type SKC - Allows detachable spacing of two sheets
Clinch feature mounts fastener permanently into metal sheet.
Unique barrel design allows for quick attachment and detachment.
Head is flush with one side of metal sheet.
Makes horizontal or vertical component mounting possible. |
 | Thru-hole Threaded Standoffs - Unified
These standoffs, which use the proven self-clinching design,
install with a squeeze in punched or drilled round holes - and
become permanently mounted in the thin sheet.
PEM® brand thru-hole threaded standoffs are installed
with their heads flush with one surface of the mounting sheet.
PEM® self-clinching standoffs are also available on special
order in non-heat treated carbon steel as type SON (thru-hole
threaded) or BSON (blind threaded).
If you require a standoff which we do not offer in this bulletin,
please contact us. We will be happy to work with you to satisfy
your special need.
The installation, pushout, torque-out and pull-thru values reported are averages when all installation specifications and procedures are followed. Variations in
mounting hole size, sheet material and installation procedure will affect this data. Performance testing of this product in your application is recommended. We
will be happy to provide samples for this purpose. |
| Thru-hole Threaded Standoffs - Metric
These standoffs, which use the proven self-clinching design,
install with a squeeze in punched or drilled round holes - and
become permanently mounted in the thin sheet.
PEM® brand thru-hole threaded standoffs are installed
with their heads flush with one surface of the mounting sheet.
PEM® self-clinching standoffs are also available on special
order in non-heat treated carbon steel as type SON (thru-hole
threaded) or BSON (blind threaded).
If you require a standoff which we do not offer in this bulletin,
please contact us. We will be happy to work with you to satisfy
your special need.
The installation, pushout, torque-out and pull-thru values reported are averages when all installation specifications and procedures are followed. Variations in
mounting hole size, sheet material and installation procedure will affect this data. Performance testing of this product in your application is recommended. We
will be happy to provide samples for this purpose. |
 | Blind Threaded Standoffs - Unified
These standoffs, which use the proven self-clinching design,
install with a squeeze in punched or drilled round holes - and
become permanently mounted in the thin sheet.
When blind-threaded types are used, outer sheet
surfaces are not only flush, but closed as well.
PEM® self-clinching standoffs are also available on special
order in non-heat treated carbon steel as type SON (thru-hole
threaded) or BSON (blind threaded).
If you require a standoff which we do not offer in this bulletin,
please contact us. We will be happy to work with you to satisfy
your special need.
The installation, pushout, torque-out and pull-thru values reported are averages when all installation specifications and procedures are followed. Variations in
mounting hole size, sheet material and installation procedure will affect this data. Performance testing of this product in your application is recommended. We
will be happy to provide samples for this purpose. |
| Blind Threaded Standoffs - Metric
These standoffs, which use the proven self-clinching design,
install with a squeeze in punched or drilled round holes - and
become permanently mounted in the thin sheet.
When blind-threaded types are used, outer sheet
surfaces are not only flush, but closed as well.
PEM® self-clinching standoffs are also available on special
order in non-heat treated carbon steel as type SON (thru-hole
threaded) or BSON (blind threaded).
If you require a standoff which we do not offer in this bulletin,
please contact us. We will be happy to work with you to satisfy
your special need.
The installation, pushout, torque-out and pull-thru values reported are averages when all installation specifications and procedures are followed. Variations in
mounting hole size, sheet material and installation procedure will affect this data. Performance testing of this product in your application is recommended. We
will be happy to provide samples for this purpose. |
 | Thru-Hole Unthreaded Standoffs - Unified
PEM® thru-hole, unthreaded
standoffs are available on
special order only.
These standoffs, which use the proven self-clinching design,
install with a squeeze in punched or drilled round holes - and
become permanently mounted in the thin sheet.
Unthreaded
standoffs are also available for spacing multi-panel
assemblies.
PEM® self-clinching standoffs are also available on special
order in non-heat treated carbon steel as type SON (thru-hole
threaded) or BSON (blind threaded).
If you require a standoff which we do not offer in this bulletin,
please contact us. We will be happy to work with you to satisfy
your special need.
The installation, pushout, torque-out and pull-thru values reported are averages when all installation specifications and procedures are followed. Variations in
mounting hole size, sheet material and installation procedure will affect this data. Performance testing of this product in your application is recommended. We
will be happy to provide samples for this purpose. |
| Thru-Hole Unthreaded Standoffs - Metric
PEM® thru-hole, unthreaded
standoffs are available on
special order only.
These standoffs, which use the proven self-clinching design,
install with a squeeze in punched or drilled round holes - and
become permanently mounted in the thin sheet.
Unthreaded
standoffs are also available for spacing multi-panel
assemblies.
PEM® self-clinching standoffs are also available on special
order in non-heat treated carbon steel as type SON (thru-hole
threaded) or BSON (blind threaded).
If you require a standoff which we do not offer in this bulletin,
please contact us. We will be happy to work with you to satisfy
your special need.
The installation, pushout, torque-out and pull-thru values reported are averages when all installation specifications and procedures are followed. Variations in
mounting hole size, sheet material and installation procedure will affect this data. Performance testing of this product in your application is recommended. We
will be happy to provide samples for this purpose. |
 | Thru-Hole Threaded Standoffs for Installation into Stainless Steel - Unified
These standoffs, which use the proven self-clinching design,
install with a squeeze in punched or drilled round holes - and
become permanently mounted in the thin sheet.
Types SO4 and BSO4 standoffs are for
installation into stainless steel sheets as thin as .040” / 1.02 mm.
PEM® self-clinching standoffs are also available on special
order in non-heat treated carbon steel as type SON (thru-hole
threaded) or BSON (blind threaded).
If you require a standoff which we do not offer in this bulletin,
please contact us. We will be happy to work with you to satisfy
your special need.
The installation, pushout, torque-out and pull-thru values reported are averages when all installation specifications and procedures are followed. Variations in
mounting hole size, sheet material and installation procedure will affect this data. Performance testing of this product in your application is recommended. We
will be happy to provide samples for this purpose.
Installed with heads flush with one surface of the
mounting sheet.
Available unthreaded for spacing multi-panel assemblies.
Installation
1. Punch or drill properly sized round mounting hole in sheet. Do not perform any
secondary operations such as deburring.
2. Insert standoff through mounting hole of sheet and into anvil as shown in drawing.
3. With punch and anvil surfaces parallel, apply only enough squeezing force to embed
the standoff’s head flush in the sheet. |
| Thru-Hole Threaded Standoffs for Installation into Stainless Steel - Metric
These standoffs, which use the proven self-clinching design,
install with a squeeze in punched or drilled round holes - and
become permanently mounted in the thin sheet.
Types SO4 and BSO4 standoffs are for
installation into stainless steel sheets as thin as .040” / 1.02 mm.
PEM® self-clinching standoffs are also available on special
order in non-heat treated carbon steel as type SON (thru-hole
threaded) or BSON (blind threaded).
If you require a standoff which we do not offer in this bulletin,
please contact us. We will be happy to work with you to satisfy
your special need.
The installation, pushout, torque-out and pull-thru values reported are averages when all installation specifications and procedures are followed. Variations in
mounting hole size, sheet material and installation procedure will affect this data. Performance testing of this product in your application is recommended. We
will be happy to provide samples for this purpose.
Installed with heads flush with one surface of the
mounting sheet.
Available unthreaded for spacing multi-panel assemblies.
Installation
1. Punch or drill properly sized round mounting hole in sheet. Do not perform any
secondary operations such as deburring.
2. Insert standoff through mounting hole of sheet and into anvil as shown in drawing.
3. With punch and anvil surfaces parallel, apply only enough squeezing force to embed
the standoff’s head flush in the sheet. |
 | Blind Threaded Standoffs for Installation into Stainless Steel - Unified
These standoffs, which use the proven self-clinching design,
install with a squeeze in punched or drilled round holes - and
become permanently mounted in the thin sheet.
When blind-threaded types are used, outer sheet
surfaces are not only flush, but closed as well.
PEM® self-clinching standoffs are also available on special
order in non-heat treated carbon steel as type SON (thru-hole
threaded) or BSON (blind threaded).
If you require a standoff which we do not offer in this bulletin,
please contact us. We will be happy to work with you to satisfy
your special need.
The installation, pushout, torque-out and pull-thru values reported are averages when all installation specifications and procedures are followed. Variations in
mounting hole size, sheet material and installation procedure will affect this data. Performance testing of this product in your application is recommended. We
will be happy to provide samples for this purpose.
Installation
1. Punch or drill properly sized round mounting hole in sheet. Do not perform any
secondary operations such as deburring.
2. Insert standoff through mounting hole of sheet and into anvil as shown in drawing.
3. With punch and anvil surfaces parallel, apply only enough squeezing force to embed
the standoff’s head flush in the sheet. |
 | Threaded Standoffs for Sheets as Thin as .025” / 0.63 mm - Unified
These standoffs, which use the proven self-clinching design,
install with a squeeze in punched or drilled round holes - and
become permanently mounted in the thin sheet.
Types TSO, TSOS, and TSOA self-clinching threaded standoffs provide permanent threads in sheets as thin as .025”
/ 0.63 mm.
PEM® self-clinching standoffs are also available on special
order in non-heat treated carbon steel as type SON (thru-hole
threaded) or BSON (blind threaded).
If you require a standoff which we do not offer in this bulletin,
please contact us. We will be happy to work with you to satisfy
your special need.
The installation, pushout, torque-out and pull-thru values reported are averages when all installation specifications and procedures are followed. Variations in
mounting hole size, sheet material and installation procedure will affect this data. Performance testing of this product in your application is recommended. We
will be happy to provide samples for this purpose.
Please contact us for availability, minimum quantity, and pricing information. |
| Threaded Standoffs for Sheets as Thin as .025” / 0.63 mm - Metric
These standoffs, which use the proven self-clinching design,
install with a squeeze in punched or drilled round holes - and
become permanently mounted in the thin sheet.
Types TSO, TSOS, and TSOA self-clinching threaded standoffs provide permanent threads in sheets as thin as .025”
/ 0.63 mm.
PEM® self-clinching standoffs are also available on special
order in non-heat treated carbon steel as type SON (thru-hole
threaded) or BSON (blind threaded).
If you require a standoff which we do not offer in this bulletin,
please contact us. We will be happy to work with you to satisfy
your special need.
The installation, pushout, torque-out and pull-thru values reported are averages when all installation specifications and procedures are followed. Variations in
mounting hole size, sheet material and installation procedure will affect this data. Performance testing of this product in your application is recommended. We
will be happy to provide samples for this purpose.
Please contact us for availability, minimum quantity, and pricing information. |
 | Threaded Standoffs for Close-To-Edge Applications - Unified
These standoffs, which use the proven self-clinching design,
install with a squeeze in punched or drilled round holes - and
become permanently mounted in the thin sheet.
Types DSO and DSOS standoffs are available for closeto-
edge applications.
If you require a standoff which we do not offer in this bulletin,
please contact us. We will be happy to work with you to satisfy
your special need.
The installation, pushout, torque-out and pull-thru values reported are averages when all installation specifications and procedures are followed. Variations in
mounting hole size, sheet material and installation procedure will affect this data. Performance testing of this product in your application is recommended. We
will be happy to provide samples for this purpose.
Please contact us for availability, minimum quantity, and pricing information. |
| Threaded Standoffs for Close-To-Edge Applications - Metric
These standoffs, which use the proven self-clinching design,
install with a squeeze in punched or drilled round holes - and
become permanently mounted in the thin sheet.
Types DSO and DSOS standoffs are available for closeto-
edge applications.
If you require a standoff which we do not offer in this bulletin,
please contact us. We will be happy to work with you to satisfy
your special need.
The installation, pushout, torque-out and pull-thru values reported are averages when all installation specifications and procedures are followed. Variations in
mounting hole size, sheet material and installation procedure will affect this data. Performance testing of this product in your application is recommended. We
will be happy to provide samples for this purpose.
Please contact us for availability, minimum quantity, and pricing information. |
 | Snap-Top Standoff for Broaching into PC Boards - Unified
PEM SNAP-TOP® Standoffs are designed for permanent installation into metal
panels or PC boards.
These all-metal standoffs use a spring action to hold PC boards and subassemblies securely, while allowing
for quick removal. Screws and other threaded hardware are eliminated. This means less parts to handle during
assembly and less risk of damaging delicate circuitry because of loose parts falling into your equipment.
These standoffs are permanently installed in the panel by squeezing them into a properly sized hole using
any standard press.
The installation and pushout values reported are averages when all installation specifications and procedures are followed. Variations in
mounting hole size, panel material and installation procedure will affect this data. Performance testing of this product in your application is
recommended. We will be happy to provide samples for this purpose. |
| Snap-Top Standoff for Broaching into PC Boards - Metric
PEM SNAP-TOP® Standoffs are designed for permanent installation into metal
panels or PC boards.
These all-metal standoffs use a spring action to hold PC boards and subassemblies securely, while allowing
for quick removal. Screws and other threaded hardware are eliminated. This means less parts to handle during
assembly and less risk of damaging delicate circuitry because of loose parts falling into your equipment.
These standoffs are permanently installed in the panel by squeezing them into a properly sized hole using
any standard press.
The installation and pushout values reported are averages when all installation specifications and procedures are followed. Variations in
mounting hole size, panel material and installation procedure will affect this data. Performance testing of this product in your application is
recommended. We will be happy to provide samples for this purpose. |
 | Snap-Top Standoff for Clinching into Metal Sheets - Unified
PEM SNAP-TOP® Standoffs are designed for permanent installation into metal
panels or PC boards.
These all-metal standoffs use a spring action to hold PC boards and subassemblies securely, while allowing
for quick removal. Screws and other threaded hardware are eliminated. This means less parts to handle during
assembly and less risk of damaging delicate circuitry because of loose parts falling into your equipment.
These standoffs are permanently installed in the panel by squeezing them into a properly sized hole using
any standard press.
The installation and pushout values reported are averages when all installation specifications and procedures are followed. Variations in
mounting hole size, panel material and installation procedure will affect this data. Performance testing of this product in your application is
recommended. We will be happy to provide samples for this purpose. |
| Snap-Top Standoff for Clinching into Metal Sheets - Metric
PEM SNAP-TOP® Standoffs are designed for permanent installation into metal
panels or PC boards.
These all-metal standoffs use a spring action to hold PC boards and subassemblies securely, while allowing
for quick removal. Screws and other threaded hardware are eliminated. This means less parts to handle during
assembly and less risk of damaging delicate circuitry because of loose parts falling into your equipment.
These standoffs are permanently installed in the panel by squeezing them into a properly sized hole using
any standard press.
The installation and pushout values reported are averages when all installation specifications and procedures are followed. Variations in
mounting hole size, panel material and installation procedure will affect this data. Performance testing of this product in your application is
recommended. We will be happy to provide samples for this purpose. |
 | Grounding Standoffs, Types SOSG and SOAG - Unified
Can satisfy component-to-board, board-to-board, and board- to-chassis production fastening needs using less attachment hardware.
BROACHING FASTENERS
PEM broaching fasteners can be utilized with all types of PC boards, as well as with aluminum, acrylic, and polycarbonate components. They install simply, quickly, and permanently for secure and reliable attachment. Their use eliminates the need for washers, lock washers, nuts, and other excess hardware.
The PEM family of broaching fasteners includes broaching nuts (Types KF2 and KFS2) with permanent threads for board mounting or component attachment; threaded or unthreaded standoffs (Types KFE and KFSE) for stacking or spacing and flare mounted standoffs (Type KFB3) for greater pullout performance; threaded studs (Type KFH) for use as solderable connectors or as permanently mounted mechanical fasteners with external threads; all-metal standoffs (Type KSSB) featuring a spring action to hold a PC board securely without screws or threaded hardware; self-expanding FOILGARD® fasteners (Type KPS6) used in plated thru-holes in multi-layer PC Boards; and one-piece board-mount screw assemblies (Type PFK) with captive screws for easy mounting and removal of PC boards.
GROUNDING STANDOFFS
Grounding standoffs (Types SOAG and SOSG) are designed for clinching into steel or aluminum chassis. The opposite end of the standoff has ′′gripping teeth′′ to firmly contact mating PC board.
Performance Data
The installation, push-out and torque-out values reported are averages when all installation specifications and procedures are followed. Variations in mounting hole size, sheet material and installation procedure will affect this data. Performance testing of this product in your application is recommended. We will be happy to provide samples for this purpose. |
| Grounding Standoffs, Types SOSG and SOAG - Metric
Can satisfy component-to-board, board-to-board, and board- to-chassis production fastening needs using less attachment hardware.
BROACHING FASTENERS
PEM broaching fasteners can be utilized with all types of PC boards, as well as with aluminum, acrylic, and polycarbonate components. They install simply, quickly, and permanently for secure and reliable attachment. Their use eliminates the need for washers, lock washers, nuts, and other excess hardware.
The PEM family of broaching fasteners includes broaching nuts (Types KF2 and KFS2) with permanent threads for board mounting or component attachment; threaded or unthreaded standoffs (Types KFE and KFSE) for stacking or spacing and flare mounted standoffs (Type KFB3) for greater pullout performance; threaded studs (Type KFH) for use as solderable connectors or as permanently mounted mechanical fasteners with external threads; all-metal standoffs (Type KSSB) featuring a spring action to hold a PC board securely without screws or threaded hardware; self-expanding FOILGARD® fasteners (Type KPS6) used in plated thru-holes in multi-layer PC Boards; and one-piece board-mount screw assemblies (Type PFK) with captive screws for easy mounting and removal of PC boards.
GROUNDING STANDOFFS
Grounding standoffs (Types SOAG and SOSG) are designed for clinching into steel or aluminum chassis. The opposite end of the standoff has ′′gripping teeth′′ to firmly contact mating PC board.
Performance Data
The installation, pushout and torque-out values reported are averages when all installation specifications and procedures are followed. Variations in mounting hole size, sheet material and installation procedure will affect this data. Performance testing of this product in your application is recommended. We will be happy to provide samples for this purpose. |
|
Tell your suppliers you found them on ThomasNet
