Belts related categories
 | Heavy Rubber Belting
Dunham Rubber & Belting distributes and fabricates black heavy duty rubber belting for a wide range of industrial applications. Some of these include but are not limited to; aggregate conveying applications such as sand, gravel, limestone, coal and ore. High Temperature (up to 750ºF) compounded conveyor belt available which is designed to provide long service life for use in applications where extreme service temperatures are common, such as steel works. Elevator leg or bucket belts for a wide variety of industries. Conveyor belting for the construction industry including products for road construction equipment such as pavers or road scalpers. Roof or shingle belts for lifting buliding material product from ground to top of buildings. Incline belting with chevron top, crescent top, cleat and z-top profiles for a wide range of conveying requirements.
We have standard SBR/Natural rubber blend for abrasion and cut resistant applications. Grade 1 premium compounds for glass cullet, sharp metals and granite conveying. MOR or Medium Oil Resistant compound belts for wood chip and whole grain applications. MSHA-SBR approved belting for underground mining applications. MSHA-SOR approved for flame retardant applications. SOR Super Oil Resistant compounds for severe oil applications when animal fats or petroleum oils are present. Excellent resistance to the deteriorating effects of kerosene, diesel oil and most heavy oils. Hot asphalt compound belting when oil and heat are present. High Heat Resistant EPDM compound belting with covers that withstand product temperatures for lumpy material to 400ºF and continuous baking loads to 350ºF.
Call customer service at 1-800-876-5340 or email us at mail@dunhamrubber.com with questions regarding your rubber belt application. |
 | Solid Woven Cotton
- Solid woven cotton belt used in food and light duty industrial applications.
- Woven to width
- Available butt ends, laced or endless
- Please call Customer Service with specific application requirements
|
| Solid Woven Polyester
- Solid woven polyester belt used in food and light duty industrial applications
- Lower stretch than cotton
- Woven to width
- Available butt ends, laced or endless
- Please call Customer Service with specific application requirements
|
 | Hot Stock & Water Belting
- It conveys hot materials with or without water present.
- Its cover is a bare-surface ply of 33 oz. silver hard duck with a carcass of heavy duty Cotton/Nylon.
- Available in Synthetic Rubber compound or special oil-resistant Synthetic Rubber (specify ′′OR′′)
|
 | Super-Trans™ Belting
- It is designed for horizontal conveyors. With friction surfaces on both sides and a skim between plies, it′s ideal for transmission belt and heavy duty package conveying applications.
- Great shock absorption, non-stretch flexibility and long-life economy.
- Available in Synthetic Rubber compound or special oil-resistant Synthetic Rubber (specify ′′OR′′)
|
 | Package-Flo™ Belting
- Package-Flo™ Belting, of 8.1 oz. Cotton/Polyester, is oil-resistant, very flexible with low stretch
- Economical
- Non-marking
- Easy-cleaning
- It′s perfect for hundreds of package-conveying and light power transmission uses
|
 | Chemglide™ Belting
Chemglide™ Belting′s treated Nylon top assures easy, speedy movement of product across the belt or smooth, fast movement of the belt under a stationary product – perfect for plants with automatic packaging machinery. Oil resistant. |
 | Hi-n-Low™ Butyl Belting
- Hi-n-Low™ Butyl Belting withstands temperatures from -65° to 300°F, is ideal for freezing and frying operations, dairy and meat products processors, industrial fabricators.
|
 | FLHP Flat Belting
- Smooth top cover and friction bottom, is odorless, non-toxic, non-marking
- Its rugged carcass resists moisture absorption and shrinkage
|
 | Tyler Wire™
- Tyler wire™ Light Impression Belting designed for inclines up to 20°, is odorless, non- toxic, non-marking
- It offers good holding power and is oil- resistant
|
 | Super-Slide™ Teflon®
- Super-Slide™ Teflon® Food Grade Belting is odorless, non-toxic, non-marking. Perfect for the candy and baking industries, its pure Teflon® film cover resists sticking
|
 | Incline Belting
- Ideal for stamping plants or boxboard plants
- Polyester carcass
- Various compounds available including SBR, Nitrile, Carboxylated Nitrile, and Gum
|
 | Chemclimb™ Belting
- Chemclimb™ Belting is perfect for use where high-degree inclines are-needed.
- Its cleated cover surface provides excellent self-cleaning and moisture drainage.
- Comes in 60 ′′-wide slabs—or we′ll custom-build for your needs. Available in SBR or Pure Gum Natural Rubber.
|
 | Chemridge™ Belting
Chemridge™ Belting is another excellent lightweight belt for steep inclines. M-shaped cleats offer super self-cleaning and moisture drainage. Comes in 60′′-wide slabs, or custom-built. Available in Gum rubber. |
 | Custom PVC Belts
Inexpensive interwoven construction for general purpose conveying applications. PVC belting has proven to be the best performing and longest lasting belt for package handling applications. Ideal for high traction conveying applications and compounds are available to offer resistance to oils, greases, water, chemicals, stretch and other abuse. PVC belts are also an excellent choice for elevator belt applications in the feed and grain industries - offers resistance to grain oils, moisture, mildew and rot. PVC belting is available in black and white color options, as well as with cover one side and cover both sides. |
 | Perforated Belts
Different hole diameters and patterns per print, single rows for folding rail belts. |
 | Flat Elastic Belts
Truly endless construction with consistent thickness throughout entire belt length and width. Used in high speed conveying and drive applications. |
 | PTFE Coated Fiberglass Fabrics, Tapes and Belts
- For Conveying & Processing Applications requiring Quick Release Surfaces
- Super-Smooth Belt Finish
- Operates at Extreme Temperatures
- Mesh Belts and solid belts available
- Anti-Static Characteristics
- Resistant to Corrosion & Chemical Attack
- Kevlar and fiber glass construction
|
 | Tatch-A-Cleat® - Model ′′L′′ Cleats- Plated (Black)
Molded rubber Tatch-A-Cleat converts any conveyor or elevator belt into a cleated belt- Attached to the belt with just a punch and screwdriver. Sanitary and easily cleaned for food handling . . . maximum shock protection for breakable packages and agricultural products . . . for all inclined belts. Cupped design of base provides tight compression to belt. Vertical ribs prevent suction between product and cleat. Made of white or black non toxic FDA approved BUNA-N rubber; resistant to oil, heat, acid, and weather. |
| Tatch-A-Cleat® - Model ′′L′′ Cleats- Stainless Steel (Black)
Molded rubber Tatch-A-Cleat converts any conveyor or elevator belt into a cleated belt- Attached to the belt with just a punch and screwdriver. Sanitary and easily cleaned for food handling . . . maximum shock protection for breakable packages and agricultural products . . . for all inclined belts. Cupped design of base provides tight compression to belt. Vertical ribs prevent suction between product and cleat. Made of white or black non toxic FDA approved BUNA-N rubber; resistant to oil, heat, acid, and weather. |
| Tatch-A-Cleat® - Model ′′L′′ Cleats- Plated (White)
Molded rubber Tatch-A-Cleat converts any conveyor or elevator belt into a cleated belt- Attached to the belt with just a punch and screwdriver. Sanitary and easily cleaned for food handling . . . maximum shock protection for breakable packages and agricultural products . . . for all inclined belts. Cupped design of base provides tight compression to belt. Vertical ribs prevent suction between product and cleat. Made of white or black non toxic FDA approved BUNA-N rubber; resistant to oil, heat, acid, and weather. |
| Tatch-A-Cleat® - Model ′′L′′ Cleats- Stainless Steel (White)
Molded rubber Tatch-A-Cleat converts any conveyor or elevator belt into a cleated belt- Attached to the belt with just a punch and screwdriver. Sanitary and easily cleaned for food handling . . . maximum shock protection for breakable packages and agricultural products . . . for all inclined belts. Cupped design of base provides tight compression to belt. Vertical ribs prevent suction between product and cleat. Made of white or black non toxic FDA approved BUNA-N rubber; resistant to oil, heat, acid, and weather. |
 | Standard Weight Belt- 1′′x1′′ Mesh Clinched Edge
Flat Wire Belts are open mesh, flexible belts formed from round edge flat strip steel producing a smooth level conveying surface. Belts are available in three different size mesh openings, two weights, two types of edges, and widths from 4 1/2 inches to 15 feet. |
 | Woven Metal Belt
Available in numerous weaves and constructions contact Customer Service for more information to meet your specific application. |
 | Flat Wire Belts- Other Constructions- Special Edges
Specialized conveying processes frequently require the alteration of basic weaves and meshes to accommodate and add retaining edges, flights, and chain driven edges. There are thousands of different constructions possible in this specialized field of belt design and application. |
 | Flat Wire Belts- Other Constructions- Flights
Specialized conveying processes frequently require the alteration of basic weaves and meshes to accommodate and add retaining edges, flights, and chain driven edges. There are thousands of different constructions possible in this specialized field of belt design and application. |
 | Flat Wire Belts- Other Constructions- Chain Driven
Specialized conveying processes frequently require the alteration of basic weaves and meshes to accommodate and add retaining edges, flights, and chain driven edges. There are thousands of different constructions possible in this specialized field of belt design and application. |
 | Heavy Duty Industrial V-Belts
BELTS INCLUDE:- AX, BX, CX, DX Cog Belts
- AP, BP, CP Section Belts
- 3VX, 5VX, 8VX, Power Wedge Cog Belts
- SPZX, SPAX, SPBX, SPCX Metric Power Wedge Cog Belts
- 3V, 5V, and 8V Super Power Wedge Belts
|
 | Synchronus/Timing Belts (Toothed Belts)
BELTS INCLUDE:- 3M, 5M, 8M, 14M, 20M Synchronous Belts
- XL, L, H, XH, XXH Synchro Cog Timing Belts
- DXL, DL, DH Dual Timing Belts
|
 | Light Duty FHP V-Belts
BELTS INCLUDE:- 2L, 3L, 4L, and 5L FHP V-Belts and Wrapped Molded FHP V-Belts
- 38X, 48X, 58X Xtra Duty V-Belt
|
 | Banded Belts
BELTS INCLUDE:- RBX, RCX, RDX, Gold Label Cog-Band
- R3VX, R5VX Wedge Band Raw Edge
- R3V, R5V, and R8V Wedge Band Wrapped
- RBP, RCP, RDP Super Vee-Band
|
 | Thoro-Twist V-Belting
- Perfect for use with V-Belt drives that have no take-up adjustment capability
- Ideal as an emergency replacement belt
- Strong, flexible, fabric reinforced urethane construction
|
 | Linear Drives
Open ended polyurethane timing belts are designed for linear drive applications, in which rotary motor motion is translated into linear movement. - High speed, up to 80 m/s
- High spring rate
- Any length available
- Various polyurethane materials available
|
 | Conveying
Polyurethane timing belts can be spliced and welded endless from open ended roll stock. The timing belts are joined together in a heat welding process. Virtually any length is possible and can be determined in one tooth increments. Preferred for conveying belts, profiled belts, covered belts and general purpose applications.- Can be profiled and machined
- Any length available
- Many facings are offered
- Various polyurethane materials available
|
 | High Carbon Steel
Polyurethane timing belts are available with several different types of tension members, these include high carbon steel, Kevlar, Stainless Steel, and Hi-Flex Steel. High Carbon steel tension members offer the following:- standard tension member
- mild corrosion resistance
- high spring rate
|
 | Kevlar
Polyurethane timing belts are available with several different types of tension members, these include high carbon steel, Kevlar, Stainless Steel, and Hi-Flex Steel. Kevlar tension members offer the following:- excellent chemical and corrosion resistance
- non-metallic
- also available with Food Grade Urethane materials
|
| Hi-Flex Steel
Polyurethane timing belts are available with several different types of tension members, these include high carbon steel, Kevlar, Stainless Steel, and Hi-Flex Steel. Hi-Flex Steel tension members offer the following:- extended belt life (frequent bending and/ or small pulley diamters)
- mild corrosion resistance
- high spring rate
|
 | Covers
Polyurethane timing belts are available with many different cover options. These include but are not limited to:- Linatex-Red Natural Rubber material 35 Durometer for such applications as the glass industry, extruders and conveyors
- Supergrip-Blue/Green PVC material 30 Durometer for diagonal, incline, and rising applications
- PVC Blue- 40 Durometer PVC for paper and wood conveying applications
- Linatrile-Orange Nitrile 55 Durometer material for chemical and oil contact conveying
- PVC White-40 Durometer white PVC for food and pharmuceutical applications, FDA approval for surface contact with foods.
Please consult Customer Service for specific application requirements. |
 | Profiles
Polyurethane timing belts can have a wide range of profiles welded or screwed onto them. Please consult Customer Service for your specific application requirements. |
 | Timing Conveyor Belt
- Available in urethane steel and urethane kevlar construction
- Available truly endless or spliced and welded
- Metric and American pitches
- Special Belt backings and covers available
- Special profiles available
- Accessories include pulleys, tenshioners and clamps
|
 | Rough Top Conveyor Belting
Dunham Rubber has an extensive selection of rough top conveyor belting for lagging pulleys, incline/decline conveying applications and general product conveyance. |
 | Spiral Link Conveyor Belt
- 150 P.I.W. Rating
- Available in:
- Smooth carboxylated nitrile
- Rough top carboxylated nitrile
- Brown nitrile rough top
- Gum rough top
- Tan Diamond Top
- White tyler wire
- Black smooth MOR
- White smooth nitrile
- Polyolefin
- Silicone
- No metal lacing
- V-Guiding available
- Field repair easily done
- Used in Magnetic conveyors and weigh scales
|
 | Laced Belts
- Clipper & Flexco:
- Steel
- Stainless Steel
- Recessed
- Hidden
- Flap over
- Plastic (Spiral & Rivet)
|
 | Endless
- Skived Endless
- Finger Endless
- Finger over Finger Endless
- Lap Endless
- Sewn
|
 | Sidewalls
- Available in Rubber Corrugated, PVC Corrugated, and Urethane Corrugated
- Gum Drop Edging
- PVC and Urethane Straight
- Available-Solid, Siped, Indents, per Drawing
|
| Novitane Belt (Food Grade)
All food grade belt specifications meet FDA requirements and are approved by USDA for direct contact with meat and poultry. |
 | Novitane Belt (Industrial Grade)
Parts with sharp edges, rotary and dicing knifes, oil, dirt and solvents are just a few of the harmful applications your conveyor belting faces every day. Novitane belting is ideal for these applications as it is specially formulated for durability and long life. Metal stamping plants, lumber mills, corrugated box and paper mills, even foundry operations-you name the industry where severe abrasion, cutting and gouging are the norm and Novitane has belted it successfully. It also resists contamination from oils, chemicals, a wide variety of solvents, and resists ozone and oxidation. |
| Novitane Belt (Industrial Grade)
What makes NOVITANE so tough? A specially formulated compound combined with single-unit construction that′s achieved through a unique process called synchronous casting. As the cover of the belt is cast, the fabric is saturated and penetrated simultaneously with polyurethane. Since there are no plies to separate, many of the problems which can lead to less-than-ideal belt life are simply eliminated.
|
 | Super II Raw-Edge V-Belt
The Super II Raw Edge V-Belt offers greater strength, longer life, better heat dissipation, better grip for controlled slippage and greater flexibility. These belts are designed for the toughest, heavy-duty industrial applications. The unique raw-edge belt sidewalls grip pulleys better to minimize belt slip, noise and drive vibration. These belts are excellent lawn and garden equipment replacement belts, for engine to deck, engine to transmission and mower deck belt applications. We supply aftermarket replacement belts for a wide range of lawn and garden equipment. Call us or e-mail us today with your specific application requirements. |
 | Antimicrobial Food Processing Belt
Conveyor belting specifically designed for food production and processing applications. These belts are produced with an additive that prevents microrganism growth from occurring. These belts are FDA and USDA compliant. |
 | Plastic Modular Belt & Chains
Plastic modular belting is ideal for many industries and multiple applications within certain industries. Key industries include: Meat (Beef and Pork) processing, Poultry, Fish processing, Bakery, Fruit and Vegetable processing, Tire Manufacturing, Corregated, Beverages / Bottling and Can Manufacturing.
Specific process applications within these industries include; cutting lines, deboning lines, pack and packaging, elevator applications, metal detector, trim lines, cold discharge, general conveyance, freezing, draining, washer infeeds, coating and glazing lines, raw dough handling, pan handling, control and sorting table, palletizing / depalletizing, sterilization, dip tank, 90º Incline holding conveyor, scaling, cooling incline, down stacker, transfer cart, 90º transfer, strap feed, mass conveyance cans, pasteurizers / warmers, accumulation tables and vacuum applications. |
 | TPU Belts for Food Processing
Thermoplastic urethane belting is available for a wide range of food applications, these include but are not limited to bakery, biscuit and snacks, meat and poultry processing, confectionary, fruit and vegetable processing.
Belting products within this section are particularly suitable for applications with extreme conditions such as narrow transfer points, low temperatures or high abrasion. Some products are available in seamless widths beyond 4 meters.
|
 | Scrap Conveyor Belt
Dunham Rubber offers belting for scrap conveyor and haul-off application requirements. Please contact customer service by e-mail or toll free 800-876-5340 with any questions. |
 | Counter-Ejector Belts
Dunham Rubber offers several styles of belting for counter-ejector applications. Please contact customer service be e-mail or toll free 800-876-5340 to discuss your specific application and requirements. |
 | Textile Apron/Picker Belt
Dunham Rubber can supply textile aprons, picker teeth belts to your specifications. Please contact Customer Service toll free 800-876-5340 to discuss your application. |
 | Novitane® Die Cutting Belts
Dunham Rubber supplies Novitane® Die Cutting Belts. Specially formulated 85, 95 and 100 durometer Shore A hardness cutting surfaces are designed to provide significant cut resistance and cost effective service life. The polyurethane saturated belt carcass provides a low coefficient of friction on the bottom surface, making the belt ideal for slider bed applications. The 120 PIW and 150 PIW fabrics are available in widths up to 96′′ and the 200 PIW fabric is available in widths up to 76′′ without a longitudinal splice. |
|
Tell your suppliers you found them on ThomasNet
