Hoists related categories
 | Chester Hoist Electric Chain Hoists
Chester Electric Low Headroom Chain Hoists are designed for those applications where headroom is limited. Engineered around proven designs, these hoists provide smooth, quiet trouble free operation in a variety of Class III applications. The units are equipped with worm drive gear reducers, case hardened load chain and are available in capacities from 1 through 25 tons. Choices of lug mounted, push/pull, hand geared or motorized trolley drives are available to meet a variety of applications.
Standard features include 5 or 6 pocket load wheels, durable self-locking worm drive transmissions, sturdy steel construction, direct acting motor brakes and two precision bearings per trolley wheel. Standard controls include reversing contactors, 115V control transformers and terminal blocks in a Nema 12 enclosure. Standard units are supplied with redundant paddle type and geared limit switches for both upper and lower hook travel. Standard voltage is 230/460 Volt, 3 phase. Each unit is custom built for the specific beam specified on the order.
This hoist design permits adaptation to a variety of applications and can be custom built to meet the end user′s specific needs. Units can be supplied to fit a variety of beams including I-beams, wide flange beams and patented track. Special control enclosures and motors can be provided for hostile or hazardous environments including explosion proof applications. Trolley options include, push/pull, hand geared or a variety of motorized speeds. Push button pendants and control circuits can be designed to meet the exact requirements of the customer. Common control circuit options include, nonstandard voltages, fuses, TOLs, current load limiters, trolley soft starts, two speed or variable speed operation, inching circuits, encoders and additional limit switches for hoist and trolley travel. Special finishes including plating and corrosion resistant paints are available. Please contact our experts with your specific requirements. |
 | Chester Hoist Pneumatic Chain Hoists
Most Chester Electric Wire Rope or Electric Chain Hoists and Tractors can be equipped for air operation . Our standard air package includes vane or piston motors and brakes with modulating valves for infinitely variable hoist motion. Single speed trolley or Tractor motion is standard using vane motors and our standard worm gear reducers. Standard controls include a two or four lever pendant. Chain hoists are supplied with limit valves for both up and down hook travel. Wire Rope hoists are supplied with upper limit valves only. Please contact our experts with your specific requirements. |
 | Coffing EC Electric Chain Hoist Hook and Lug Suspension
High performance hoists engineered for heavy duty industrial service. Designed for safety, the
EC incorporates mechanical load brake, motor brake, and overload clutch as standard.
• CAPACITIES & LIFTS - Rated loads from 1/4 to 5 Tons, with 10, 15, and 20-foot standard lifts. Other lifts available. Standard push button drop is 4-feet less than lift.
• VOLTAGE & MOTOR OPTIONS - 115/230, 208 - single phase; 230/460, 208, 220/380, 575 - three phase. 60 hertz standard,50 hertz available. Two-speed motors available (3 to 1 speed ratio).
• SUSPENSION OPTIONS - Rigid or swivel top hook, lug, plain, geared,and motorized trolley available.
• SMALL FRAME DESIGN - Features housings of cast aluminum alloy construction for minimum weight. Engineered and designed for use with motors up to 1 HP.
• LARGE FRAME DESIGN - Features load bearing housings of ductile iron construction for maximum strength. Non-load bearing housings of cast aluminum alloy for minimum weight. Engineered and designed for use with higher torque 2 and 3 HP three phase motors.
• DURABLE CONSTRUCTION - Built in compliance with ASME/ANSI B30.16 and CSA standards.
• ACCESSORIES & OPTIONS - Full line of accessories available, including Variable Frequency Drives.
• LIFETIME WARRANTY
|
 | Coffing JLC Electric Chain Hoist Hook and Lug Suspension
Designed for industrial duty performance. Compact in size, the JLC features a multiple disc motor brake, overload clutch, and chain end stop for safety.
• CAPACITIES & LIFTS - Rated loads from 1/8 to 2 Tons, with 10, 15, and 20-foot standard lifts. Other lifts available. Standard push button drop is 4-feet less than lift. CSA approved.
• VOLTAGES - 115/230 - single phase; 230/460, 208, 380, 415, 575 - three phase, 60 hertz standard, 50 hertz available.
• TWO-SPEED HOIST MODELS - Optional with 3 to 1 speed ratio, three-phase, single voltage only.
• LIMIT SWITCHES - Adjustable to regulate upper and lower load travel. Brass nuts standard for improved repeatability and chain positioning.
• OIL BATH TRANSMISSION - Precision machined alloy steel gears run in oil bath for longer, quieter operation.
• NEMA 3R PUSH BUTTON STATION - Ergonomic design fits operator’s hand for thumb or two-handed operation. 24 Volt Control for operator safety. 115 Volt Control available upon request.
• FRAME - Compact aluminum housing for portability and ease of installation.
• ACCESSORIES - Full line of accessories available, including Variable Frequency Drives.
• CHAIN CONTAINER - Standard on lifts up to 20 ft. single chain / 10 ft. double chain
• LIFETIME WARRANTY |
 | Coffing ED Extended Duty Electric Chain Hoist
For Special Applications
• Capacity 1/2 - 2 Ton
• Standard lift is 10 feet.
• Totally enclosed, fan-cooled motor for extended
operation.
• Highly adaptable for automated plating, heat treating, steel warehouse, foundry, and machine shop use. |
 | Coffing EC Turnover Electric Chain Hoist
For Special Applications
• Capacity 1/4 - 4 Ton
• Standard lift is 15 feet.
• Heavy-duty, specially modified electric chain
hoist with two load hooks.
• Completely inverts virtually any shape load with use of simple slings and successively repositioned load hooks. |
 | Shaw-Box 700 Series Size 2 Single Reeved Hoists with Motor Driven Trolleys
SHAW-BOX 700 Series wire rope hoists are
designed and manufactured for heavy-duty service,
This workhorse is built to deliver, day-in and day-out,
under tough operating conditions. 700 Series
hoists are built to take even the most demanding job
cycles in stride, yet can be relied upon to handle your
most delicate loads with precision control.
Their compact design, with
high hook lift and closer end
approaches, maximizes hook
coverage within an existing
facility, reducing or eliminating
the need for costly rebuilding or
remodeling. 700 Series.hoists
achieve an unusually high hook
lift, without resorting to design compromises.
This line offers the greatest range of lifting
speeds, controls, headroom and mounting options of any
hoists on the market today. 700 Series hoists are available
in both electric and air powered models. Options include
standard and low headroom, deck and base mounted
models, with a choice of single reeving or true vertical lift.
The lug is integral with the all-steel, one-piece welded frame, and is designed for stationary mounting from an
overheads tructure or with any of our trolley options. |
| Shaw-Box 700 Series Size 2 Deck Mounted, Standard Headroom Single Reeved
SHAW-BOX 700 Series wire rope hoists are
designed and manufactured for heavy-duty service,
This workhorse is built to deliver, day-in and day-out,
under tough operating conditions. 700 Series
hoists are built to take even the most demanding job
cycles in stride, yet can be relied upon to handle your
most delicate loads with precision control.
Their compact design, with
high hook lift and closer end
approaches, maximizes hook
coverage within an existing
facility, reducing or eliminating
the need for costly rebuilding or
remodeling. 700 Series.hoists
achieve an unusually high hook
lift, without resorting to design compromises.
This line offers the greatest range of lifting
speeds, controls, headroom and mounting options of any
hoists on the market today. 700 Series hoists are available
in both electric and air powered models. Options include
standard and low headroom, deck and base mounted
models, with a choice of single reeving or true vertical lift.
The lug is integral with the all-steel, one-piece welded frame, and is designed for stationary mounting from an
overheads tructure or with any of our trolley options. |
 | Shaw-Box 800 Series Air Hoists
SHAW-BOX Series 800 Wire Rope Air Hoists use the same mechanical parts as the Wire Rope Electric Hoists. The electric motor, controls and push button of the electric hoist are replaced by an air motor, control valve and pendant control assembly for the air hoist. A motor brake is also available as an option.
• Powerful 8 blade crane type vane air motor is especially desinged for high torque operation.
• Pendant throttle control. Two lever handle meters the air for precise variable speed control. Pendant handle and 3 hose assembly supported by steel strain relief cable.
• Block operated upper limit switch standard. Two position geared limit switch available as an option.
• Three reduction helical and spur gearing, precision cut and heat treated.
• Lubrication is oil splash type in sealed gear case.
• Weston type mechanical load brake holds the load and provides controlled lowering.
• Anti-friction bearings throughout.
• Deep grooved, large diameter rope drum which stores rated lift of hoist without overwrap.
• Shrouded lower block with full swiveling forged steel hook with hook latch.
• Air mufflers standard.
• Spark-Resistant feature is an available option.
|
 | CM Lodestar Electric Chain Hoist
The balanced, integrated, proven design of the Lodestar has made it the most popular electric chain hoist in the industry. Lodestar gives you more value for your money including:
• Quick change voltage board-change from low voltage to high voltage by simply repositioning receptacle
• Up to 3 ton capacities for heavy-duty industrial applications
• Gear train lifetime lubricated with non-oxidizing grease
• Precision machined and hardened liftwheel with hardened chain guides for precise chain liftwheel fit
• Gearing designed for exceptionally long life and quiet operation
• H4 duty standard
• Rugged control station (NEMA 4X)
• Hoist duty motor, standard Protector overload device and standard screw type limit switches
• Hardened, forged steel, latch type hooks and Hoistaloy load chain for long, dependable service
• Easy to install and maintain
• No special tools required to disassemble
• Lifetime warranty
• Each hoist thoroughly inspected and tested to over 125% of rated load prior to shipment
• Meets ASME B30.16
• Metric rated
• Made in U.S.A.
Special applications
• Harsh environment hoists available for severe duty of plating, galvanizing and washdown applications
• Hoists with climbing capability available for temporary rigging or lifting applications — must be used in inverted position only
• Hoists with creep control allow precise positioning through field adjustment within the time delay range of .05 sec. to 3 sec.
• Articulating suspension 3 ton only |
 | CM Lodestar XL Electric Chain Hoist
Columbus McKinnon introduces an expanded
line of Lodestar XL electric chain hoists for lifting applications from 2 to 71⁄2 tons. The new offering provides heavy-duty hoists featuring faster speeds, less reeving, and higher capacities than traditional chain hoists. Workers in automotive plants, heavy equipment manufacturing, paper mills, and related rugged work environments will experience the same dependability and versatility that they have relied on for many years.
The NEW features of the Lodestar XL Electric
Chain Hoist include:
• Lifting capacities up to 7 1⁄2 tons
• Increased lifting speeds throughout the line
• Double reeved units with 3-5 ton lifting capacities
• Maximum lifting speed of 30 feet per minute
A glimpse of the many features of the Lodestar XL that have honed its reputation for durability and long life:
• Heavy-duty, multiple disc braking system
• Forged ten-pocket oblique-lay liftwheel for smooth chain operation, constant chain speed, and reduced chain wear
• Gearing operated in oil bath for increased lifting life and quiet operation
• Rated H-4, heavy-duty
• Standard overload protector
• Screw-type limit switches
• Thermally protected motor
• Factory tested at 125% of rated capacity
• Made in U.S.A. |
 | CM Shopstar Electric Chain Hoist
The ShopStar electric chain hoist features rugged construction and high H4 duty cycle. It keeps lifting and lifting, up to 1,000 pounds and 300 motor starts per hour. Additional features and benefits include:
• H4 duty cycle (300 motor starts/hour)
• Easy installation and maintenance
• Standard protector overload device
• 10 pocket oblique lay liftwheel provides longer chain wear
• Epoxy powder coat finish
• 61⁄2 ft. power cord with molded 3 prong plug on 115 volt units
• NEMA 4 industrial rated control station
• Optional impact-resistant chain container available
• Gear train lifetime lubricated with non-oxidizing grease
• CM Hoist Alloy Load Chain (zinc plated optional)
• Thermally protected hoist duty motor
• Dual braking system — D.C. plus regenerative
• Rugged cast aluminum alloy hoist frame
• 5:1 design factor
• Small, compact design for commercial & industrial applications
• Rigid hook suspension prevents tangling of power cord
• Hardened forged steel latch style lower hook rotates 360°
• Totally enclosed non-ventilated
hoist frame protects motor from environmental contamination
• True vertical lift
• Precision bearings used throughout hoist
• Lifetime warranty
• Made in U.S.A. |
 | CM Valustar Electric Chain Hoist
Designed specifically for general commercial applications.
This compact, lightweight hoist features:
• Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear
• Standard lift 10, 15 & 20 ft.
• 5 ft. power cord length
• Heavy-duty caliper type AC brake
• Rugged NEMA 4 control station, 115 volt control circuit
• Easy to install and maintain
• Hoistaloy load chain for smooth operation and maximum chain life
• Efficient regenerative braking system to avoid heat generation in power train
• Enclosed hoist duty motor
• Gear train lifetime lubricated with non-oxidizing grease
• Latch type hooks
• Hook suspension standard
• Fully machined and heat treated gear train
• Standard overload Protector device
• H3 duty-1 phase; H-4 duty-3 phase
• One-year warranty
• Metric rated
• Made in U.S.A. |
 | CM Powerstar Electric Chain Hoist
Designed specifically as an alternative to wire rope hoists for high speed lifting of loads from 2 to 20 tons in a space saving chain hoist.
• H-4 or better rated duty cycle
• Designed for heavy-duty industrial applications from 2 to 20 ton capacities
• Liftwheel has machined chain pockets and is heat treated alloy steel for maximum strength and wear resistance
• Efficient regenerative braking system avoids heat generation in power train
• Motors up to 7 1/2 h.p. provide a wide range of lifting speeds
• Single or two speed controls. Two speed models operate on 3:1 speed ratio
• Standard adjustable upper and lower screw limit switches
• Standard overload Protector device
• Hoistaloy load chain can be easily inspected for wear and abuse
• True vertical lift
• Factory tested to 125% of rated capacity prior to shipment
• Metric rated except for 10 & 20 ton capacities
• Rugged aluminum alloy hoist frame
• Chain guide surrounds liftwheel
• Machined and hardened steel Helical gears used throughout hoist for optimum performance and mechanical efficiency.
• Extensive use of life-lubricated bearings plus sealed oil bath power train reservoir for minimum maintenance.
• Dual braking system
• Heavy duty, industrial single speed controls include magnetic reversing contactor which operates on 115 volts provided by a control transformer.
• Totally enclosed, ball bearing, 30 minute rated, thermally protected, hoist duty motor is standard.
• Push button control is weatherproof
(NEMA 4 rated).
• Drop of push button control is 4 ft. above hook at lowest position, unless otherwise specified.
• External push button chain strain relief is standard.
• Power cord length is 2 1/2 ft. unless otherwise specified.
• Trolley design permits easy adjustment for installation on a broad range of beam flange widths.
• Trolley wheels have double row, tapered roller bearings plus machined and hardened universal treads to permit operation on American Standard or flat flanged sections interchangeably.
• Spur gearing used in all motorized trolleys for improved efficiency and durability.
• Drop of hand chain on geared trolleys is 2 ft. above hook at lowest position, unless otherwise specified.
• Designed to be maintained “on the beam.”
• Up to 600 lineal feet of chain
• Weatherproof (NEMA3R)
• Lifetime warranty
• Made in U.S.A. |
 | CM Lodestar Air XL Pneumatic Chain Hoist
Columbus McKinnon introduces a new line of Lodestar Air XL chain hoists for lifting applications from 2 to 71⁄2 tons. The offering provides heavy-duty hoists featuring variable speeds and higher capacities than traditional air chain hoists. Workers in automotive plants,
heavy equipment manufacturing, chemical plants,
refineries, and related rugged work environments will experience the same dependability and versatility that they have relied on from CM products for many years.
The features of the Lodestar Air XL Chain Hoist includes:
• Lifting capacities up to 71⁄2 tons
• Variable lifting speeds
• Maximum lifting speed of 31 feet per minute
• Forged ten-pocket oblique-lay liftwheel for smooth chain operation, constant chain speed, and reduced chain wear
• Standard overload protector
• Clutch acts as upper and lower limits
• Six-vane rotary air motor
• Pendant controls provide precise load spotting
• Air actuated motor brake for positive load control
• Factory tested at 125% of rated capacity
• Spark resistant models available
• Lifetime warranty
• Made in U.S.A.
• Standard Lift: 10 ft.
• Air inlet size: 1˝ NPT
• Air supply hose size: 1˝ I.D. min.
• Consumption:175 CFM at 90 PSI
• Exhaust:11/4˝ NPT
|
 | CM ShopAir Chain Hoist
Compact, powerful, and precise for assembly and manufacturing applications up to 1,000 pounds.
The CM ShopAir combines superior lifting speeds, rugged design, and precise load spotting in a portable air chain hoist. As a workstation hoist or a production line hoist, the ShopAir is the ideal choice.
CAPACITIES: 250 to 1,000 Lbs.
NORMAL OPERATING PRESSURE: 90 PSI (6.2 bar)
AIR CONSUMPTION: 34 cu.feet/min.
• Standard ProtectorTM overload device.
• 10-pocket, oblique lay liftwheel provides longer chain life.
• Epoxy powder coat finish provides a durable exterior.
• Durable reduction gearing means reliable operation
• Variable flow, two lever pendant for precise load spotting.
• Threaded external exhaust for piping away exhaust in clean room or painting applications.
• Small, compact design for commercial & industrial applications.
• Industrial duty air motor for tough applications.
• Gear train is lifetime - lubricated with non-oxidizing grease.
• Hardened forged steel, latch -type lower hook rotates 360°.
• Hardened forged steel, rigid latch - type upper hook.
• Rugged cast aluminum alloy hoist frame.
• Alloy load chain.
• Maximum pendant drop - 36 ft.
• Lifetime warranty against defects in materials and workmanship.
• Made in U.S.A.
|
 | CM Airstar Chain Hoist
Designed for general commercial applications where variable speed pneumatic power is preferable. Rated for 1/4, 1/2 and
1 ton capacities, this compact, lightweight hoist features:
• Hoistaloy load chain for heavy duty or stainless
steel chain for spark resistant, medium duty loads
• Positive action, heavy-duty shoe type brake
that holds the load
• Multi-vane rotary air motor for high torque,
smooth operation
• Accurately machined heat treated alloy steel
spur gears
• Spark resistant models available for hazardous
environments
• Pull cord or pendant throttle control available
• Pull cord control hoists provide a lightweight,
economical hoist for accurate control of loads
• Optional pendant throttle control hoists offer
ergonomic, one-hand control for ease of operation
• Hook or lug suspension available
• Inlet air swivel with built-in strainer provides
free hoist movement
• Aluminum frame and end cover contributes to the
lightweight, easily portable, and rugged design
• External brake adjustment
• Limit stops prevent over-travel in upper and
lowering directions
• Equa-torque gearing of alloy steel, heat treated
spur gears are accurately machined to provide a close meshed, compact gear reduction
• Tapped exhaust port 1/2 NPTF... for cleanroom
applications or to add a supplemental muffler
in addition to the built-in muffler for even
quieter operation
• Lifetime warranty
• Metric rated
• Made in U.S.A. |
 | CM Airstar 6 Air Hoist
Designed for general industrial applications where variable speed pneumatic power is preferable. Rated for loads of up to 3 tons.
This compact, lightweight hoist features:
Rated Loads: 1, 2, and 3-ton (Spark resistant models are rated at 1/2, 1 and 2 ton)
Air Pressure
Recommended: 90 PSI
Air Consumption: 70 SCFM (full load-full speed) slow speed
model 80 SCFM (full load-full speed) fast speed model
Pendant Control Hose: 6 foot pendant hose standard for 10 foot lift hoist, longer hose assemblies up to 36 foot available.
Lift: 10 foot lifts are standard. Longer lifts are an optional extra.
Net Wt. (Basic Hoist): 100 pounds
Suspension: Hook or lug
Air Inlet Size: 3/4 NPTF
Air Supply Hose Size: 3/4 I.D. min.
• Hoistaloy load chain for heavy duty or stainless steel chain for spark resistant, medium duty loads
• Lightweight aluminum frame and cover
• Positive action, spring biased Weston-type load brake holds the load, provides exacting load spotting and control
• Multi-vane rotary air motor with eight vanes
for high torque, smooth operation, positive starting
• Precision cut heat treated helical and spur gear
combination for quiet, efficient operation
• Pendant throttle handle is full flow design for
precision throttle capabilities
• Spark resistant models available for hazardous
environments
• Hook or lug suspension available
• Standard overload protector device
• Internal Muffler-reduces sound level
• Throttle Valve—precision throttle valves meter the air for smooth operation
• Chain container optional
• Lifetime warranty
• Metric rated
• Made in U.S.A. |
 | CM TMM-140 Manipulator
300 Lb./140Kg Air Manipulator Hoist
The CM TMM-140 is ideal for workstation applications. Lightweight and portable, the unit weighs less than 20 pounds and operates at 100% (A5) duty cycle.
• Smooth operator - Efficient rotary vane motor provides high uniform torque for quick response, and smooth, quiet operation.
• Easy to use - Handle-mounted pendant control for one-handed operation and load positioning.
• Variable speeds - Precise and infinite speed control for accurate load spotting.
• Wire rope design - Self-winding lifting cable stores conveniently inside unit.
• Suspension - Swivel top and bottom hooks with hook latches standard, for portability and quick installation.
• Disc brake - Secures load and eliminates drift when pendant is released.
• Note - A 3/8′′ NPT air filter-regulatorlubricator
is needed for effective operation. Spark resistant features are not available.
Ideal Applications Include:
• Assembly lines
• Machine shops
• Cleaning and/or dipping operations
• Manufacturing plants
• Power generating stations
• Shipping departments
• Chemical facilities
• Fabricating shops
• Repetitive lifting applications
• Auto and truck repair
• Handling fixtures and dies
|
 | CM Hurricane 360 Hand Chain Hoist
The New CM Hurricane unleashes a full circle of flexibility for lifting and pulling.
• Standard Load Limiter - For simple, automatic overload protection.
• Improved Braking Power - With its braking system, the CM Hurricane is exceptionally quiet, and improves operational safety and serviceability.
• Powder Coated Finish - For corrosion protection.
• Heat Treated Steel Gearing - All internal gears and pinions are heat treated steel for high srength and lng life.
• Chain Guide and Stripper - Assures load chain alignment.
• Precision 4-Pocket Liftwheel - Fully machined for better hain fit and reduced wear allowing for accurate movement of the load chain.
• Hardened Steel Chain - Alloy steel load chain assures high strength and long wear life.
• Minimal Maintenance - Easily disassembled, requiring no special tools.
• Meets ASME B30.16 - And European CE Standard
• 5-Year Warranty - Against defects in materials
and workmanship. |
 | CM Cyclone Hand Chain Hoist
One of the most popular and reliable hoists ever designed, the Cyclone combines superior engineering, efficiency and durability. Available in a variety of capacities from 1/4 ton to 10
tons, Cyclone features:
• Most interchangeability of parts in the industry
• Standard Load Limiter for simple, automatic
overload protection
• Enclosed contoured Weston-type automatic brake for positive load control
• High-efficiency spur gearing for greater lift with minimum effort
• Rugged Hoistaloy chain for added strength and durability
• Fully machined, forged liftwheel pockets for easier lifting and smooth free chaining
• High-strength aluminum alloy castings in frame and covers
• Inspected over 75 times to meet or exceed HMI and ASME/ANSI performance and safety standards
• Standard hand chain drop is 2 feet less than lift, (example: 8 foot lift hoist has 6 foot hand chain drop)
• Lifetime warranty
• Metric rated
• Made in U.S.A.
Options Include:
• Fabric chain bags
• Metal chain containers
• Zinc-plated load and hand chain
• Unwelded hand chain
• Latchlok hooks
• Bronze hooks
• Bullard hooks
• Eye-type suspension |
 | CM Cyclone Army Type Hand Chain Hoist
Same quality and performance as the Cyclone in a compact, low headroom integral trolley mount. Ideal for applications requiring a moveable hoist including:
• Rugged steel loadbars connected directly to hoist frame
• Reduced headroom, side clearances and end approach for easy maneuvering of heavy loads in tight places
• Standard Load Limiter automatic overload protection
• Plain and geared trolley mounts in capacities from 1/4 to 12 tons
• Universal tread trolley wheels for operation on sloped or flat flanged beams
• Standard hand chain drop 2 feet less than lift (example: 8 foot lift hoist has 6 foot hand chain drop)
• Chain containers, zinc-plated load and hand chain, aluminum unwelded hand chain, Latchlok hooks, bronze hooks, bullard hooks, larger beam trolleys, trolley guards, and units without Load Limiter optional, depending on capacity
• Lifetime warranty
• Metric rated
• Made in U.S.A. |
 | CM Cyclone Low Headroom Hand Chain Hoist
Cyclone and trolley all in one unit for low headroom applications features:
• Crowned tread and flanged wheels to minimize rolling friction
• Simple, efficient design
• Reduced headroom, side clearances and end approach for easy maneuvering of loads in tight places
• Plain trolley mounts in capacities from 1/2 to 6 tons
• Geared trolley mounts in capacities from 1 1/2 to 6 tons
• Standard hand chain drop 2 feet less than lift
(example: 8 foot lift hoist has 6 foot hand chain drop)
• Chain containers, zinc-plated load and hand chain, aluminum unwelded hand chain, Latchlok hooks, bronze hooks, bullard hooks, larger beam trolleys, trolley guards and units without Load Limiter optional,depending on capacity
• Standard Load Limiter/automatic overload protection
• Lifetime warranty
• Metric rated
• Made in U.S.A. |
 | CM Series 602 & 603 Mini Ratchet Lever Hoist
Mini-Ratchet Lever Hoists lift up to 1100 lbs. plus the convenience of toolbox storage. The CM Series 603 & 602 Mini- Hoists are the most compact ratchet lever hoists in the market, perform just like the larger models, plus come standard with these great features:
• Plated load chain is standard.
• Weston-type load brake.
• Rubber hand grip for better comfort and security.
• Lightweight design for ease of portability. Use in confined conditions with one-hand operation.
• Forged upper and lower hooks with latches standard.
• Impact resistant, all-steel frame, gear case and cover.
• Hardened link-type alloy steel load chain for strength and long wear.
• Free wheeling feature serves to quickly attach the load.
• Metric rated.
|
 | CM Series 653 Lever Operated Hoist
Ideal for construction and industrial applications
The Series 653 lever operated hoist is a high quality, rugged, steel tool for close quarter pulling, stretching, and hoisting applications.
Its characteristic short handle, along with minimal lever pull effort, make this tool ideal for a broad range of applications.
• Capacities from 3/4 to 6 tons
• Impact resistant, stamped steel frame, gear case and cover for durability and light weight.
• Powder coated finish for added corrosion protection.
• Hardened steel load sharing gears.
• Double pawl arrangement for assured load control.
• Two chain guide rollers for positive chain engagement.
• Weston type braking system for positive load control and positioning.
• Simple one-handed, free chaining for fast load attachment.
• Hardened steel chain for strength and long wear life.
• Forged upper and lower hooks with heavy cast steel latches.
• Rubber handle grip for added operator comfort.
• Minimal maintenance with no special tools required.
• 5-year warranty against defects in materials and workmanship.
• Metric rated.
• Meets ASME B30.21 – Manually Lever Operated Hoist Standard and European CE Standard.
• Designed and manufactured by Columbus McKinnon Corporation. |
 | CM Rigger Lever Operated Hoist
Designed for moderate commercial applications, this lightweight, compact tool stores easily and features:
• Flexible, non-binding CM load chain
• Forged upper and lower hooks with latches standard
• Free-wheeling chain for fast attachment
• Clover leaf chain guides and stripper seat chain in liftwheel reduce chance of jamming
• Unlimited lift by ordering any length chain
• Ratchet, driving pawl and holding pawl for load control
• One lever used to change from lifting to lowering and back to lifting
• Easy maintenance
• One-year warranty
• Metric rated
• Made in U.S.A. |
 | CM Wire Rope Lever Hoist
Engineered for Reliable Operation
• Handle Designed for Overload Protection—Handle
bends to warn of hazardous condition and prevent
dangerous overload.
• Hooks with Hook Latches—360° swiveling hooks
equipped with latches for positive load engagement.
• Meets ANSI Standard B30.21.
• Tested to 125% of Capacity.
• Made in U.S.A.
Portable and Durable
• Lightweight and Rugged—Special cast aluminum alloy housings.
• Heavy Duty Cable—Utilizes preformed and
galvanized 7 x 19 (133 strand) extra flexible
aircraft cable.
• Corrosion Resistant—All stainless steel springs
and shafts.
• Reduced Wear—All rotating shafts are mounted
on bronze bushings.
Easy to Operate
• Self-storing Cable Drum—Provides compact operation.
• Fast Cable Take-up—Winding wheel provided
for quick take-up or positioning of cable.
• Easy Load Positioning—Utilizes a double interlocking pawl system for precise load adjustment.
• Positive Load Holding in All Environments—Provided by double interlocking pawl mechanism.
• Open Construction—Allows for easy cleaning
and inspection.
Special Model Features
• All models are available with Bullard-type hooks.
• CM430CDPA equipped with oversized slip hooks— ideal for opening and closing boxcar doors. |
 | Yale Y80 Series Electric Monorail Wire Rope Hoists
Yale Y80 Series hoists are available in two basic models: single reeved and true vertical lift, with either air or electric power.
The heavy-duty wire rope and drum-type hoist line has a steelmounting lug integral with the one-piece welded frame, and is designed for stationary mounting from an overhead structure, or with any of our monorail trolley options. Standard features of this rugged hoist line include a heavy welded steel frame, powerful drive motor, totally enclosed oil-bath lubricated drive train, and dual brake reliability.
Yale® Y80 Series wire rope hoists are ideally suited for virtually any lifting application of up to five tons. Their modular design and versatility provide a wide range of capacities, lifts, hoisting speeds, and control options, making it possible to select the most efficient hoist for the job without wasted capacity or overkill.
The compact design and closer end approaches of the standard
Y80 Series hoist allows an unusually high hook lift, as compared to
many so-called low headroom hoists, without resorting to design
compromises. Y80 Series hoists maximize hook coverage within an
existing facility, reducing or eliminating the need for costly
rebuilding or remodeling. |
| Yale Y80 Series Air Hoists
Y80 Series wire rope hoists are ideally suited for virtually
any lifting application of up to five tons. Their modular
design and versatility provide a wide range of capacities,
lifts, hoisting speeds, and control options, making it possible
to select the most efficient hoist for the job without wasted
capacity or overkill.
The compact design and closer end approaches of the
standard Y80 Series hoist allows an unusually high hook
lift, as compared to many so-called low headroom hoists,
without resorting to design compromises. Y80 Series
hoists maximize hook coverage within an existing facility,
reducing or eliminating the need for costly rebuilding or
remodeling.
Y80 Series hoists are available in two basic models: single
reeved and true vertical lift. The heavy-duty wire rope and
drum-type hoist line has a steel mounting lug integral with
the one-piece welded frame, and is designed for stationary
mounting from an overhead structure, or with any of our
monorail trolley options. Standard features of this rugged
hoist line include a heavy welded steel frame, powerful
drive motor, totally enclosed oil-bath lubricated drive train,
and dual brake reliability.
|
 | Yale Model KALC Air Hoists
These YALE KALC Air Hoists are precision built chain type hoists which are built in three capacity sizes: 1, 2, and 3 ton. All models use coil type load chain and have pendant throttle controls. There are model variations with hook or lug type suspensions. Hoists are also provided in spark resistant models and corrosion resistant models.
|
 | Yale Model YAL Air Hoists
Capacities from 1/4 to 1 ton for standard models,
and 3/8 to 3/4 ton for spark resistant.
The Yale Model SAL Air Hoists are precision, air operated link type chain hoists. Each unit is supplied with a pendant throttle control station for controlling the lifting and lowering speeds and an upper latch type hook for suspending the hoist from a fixed support or trolley.
•Standard Protector overload device.
•10-pocket, oblique lay liftwheel provides longer chain life.
•Epoxy powder coat finish.
•Variable flow, two lever pendant for precise load spotting.
•Threaded external exhaust for piping away exhaust in clean room or painting applications.
•Small, compact design for commercial & industrial applications.
•Industrial duty air motor for tough applications.
•Hardened forged steel, latch-type lower hook rotates 360 degrees.
•Hardened forged steel, rigid latch-type upper hook.
•Rugged cast aluminum alloy hoist frame.
•Alloy load chain.
•Gear train is lifetime-lubricated with non-oxidizing grease.
•Lifetime warranty against defects in materials and workmanship.
•Made in USA. Overloading and improper use can result in injury. |
 | Yale ACL Air Chain Hoists
Models are available in capacities from 1/4 to 6 ton. This hook mounted hoist is lightweight and portable. Pull cord control is standard with optional twist type pendant. |
 | Yale TMM-140 - Air Manipulator Hoist
The TMM -140 is an ideal workstation hoist. Lightweight
and portable, the unit weighs less than 20 pounds and
operates at 100% duty cycle.
• Capacity: Rated loads 300 lbs./140 kg.
• Efficient rotary vane motor provides high uniform
torque for quick response and smooth, quiet operation.
• Handle-mounted pendant control for one-handed operation
and load positioning.
• Precise and infinite speed control for accurate load spotting.
• Self-winding lifting cable stores conveniently inside unit.
• Swivel top and bottom hooks with safety latches
standard, for portability and quick installation.
• Secures load and eliminates drift when pendant is released.
• A 3/8” NPT air filter-regulator-lubricator is needed for effective
operation. Spark resistant features are not available.
• Lifetime Warranty
• Ideal Applications
- Assembly Lines
- Machine Shops
- Cleaning and/or Dipping Operations
- Manufacturing Plants
- Power Generating Stations
- Shipping Departments
- Chemical Facilities
- Fabricating Shops
- Repetitive Lifting Applications
- Auto/Truck Repair
- Handling Fixtures and Dies |
 | Yale Model XL Air Hoists
Continuous Duty Service
Yale XL Model - 2 to 7 1/2 Tons
Air Chain Hoists features continuous duty service for precise, infinitely variable
speed and accurate load spotting. Ideal for use in hazardous areas where
electricity is not an option.
• Capacities & Lift - Rated loads from 2 to 7 1/2 Tons.10-foot lifts
are standard. Longer lifts are available.
• Speeds - 9 to 31 feet per minute (FPM) at 90 PSI air operating pressure.
• Controls - Pendant controls provide precise load spotting.
• Hook and lug suspension available. Lug suspension is for use with plain,
geared and air motor drive trolleys.
• Motor - 6-vane air motor produces high, uniform torque for smooth,
easy lifting.
• Spool Valve - Precision spool valves meter air for smooth starts.
• Brake - Air actuated motor brake for positive load control.
• Transmission Gears - Precision machined steel run in oil bath
for longer quieter operation.
• Forged Ten-pocket Oblique-lay Liftwheel - For smooth chain operation,
constant chain speed, and reduced chain wear.
• Overload Clutch - Protects hoist, operator, and supporting structures
from damaging overloads. Clutch acts as upper and lower travel limits.
• Spark Resistant Models - For hazardous environments, includes
copper plated hooks and lower bottom blocks, stainless steel hook
latch, and plated load chain.
• Lifetime Warranty |
 | Little Mule LMSC Ratchet Lever Hoists
For Heavy Duty Construction and Industrial Applications
Rugged and Lightweight
• Rated loads of 3/4, 1 1/2, 3 and 6 tons, with 5, 10, 15, and 20 foot lifts.
• Impact resistant stamped steel housing withstands years of rigorous use.
• Compact design makes the LMSC extremely portable and easy to rig.
• Through hardened load chain provides high strength and resists wear.
Easy To Operate
• Low handle effort is provided by double reduction gearing and short handle with cushioned, ergonomic grip. The result is easy operation with minimal handle effort.
• 360° rotating handle provides versatile rigging options when used in confined spaces.
• State-of-the-art free wheeling mechanism allows quick and easy one-handed take-up and positioning of slack chain.
Engineered For Reliable Operation
• Optional load limiter alerts operator of a possible overload by allowing the handle to rotate without lifting the higher-than-rated load.
The load limiter can be field-installed.
• Enclosed screw and disc-type load brake stays clean and dry for positive load holding and positioning. Latches on hooks assist load hookup.
• Meets or exceeds minimum 4:1 design factor and all requirements of ASME/ANSI Standard B-30.21. All units tested at 125% of rated load. |
 | Little Mule LMR Ratchet Lever Hoists
Aluminum Construction Low Handle Effort
Rugged and Lightweight
• Rated loads of 3/4, 1, 1 1/2, and 3 tons, with 5, 10, 15, and 20 foot lifts.
• Unit and handle made from high strength ductile aluminum alloy. Compact design increases portability and rigging efficiency.
Easy & Reliable Operation
• Double reduction gearing and short handle provide lowest handle effort in the Little Mule line.
• Provides versatile rigging options when used in confined spaces.
• State-of-the-art free wheeling mechanism allows quick and easy one-handed take-up and positioning of slack chain.
• Meets or exceeds minimum 4:1 design factor and all requirements of ASME/ANSI Standard B-30.21. All units tested at 125% of rated load.
Special Model Features
• Enclosed self-adjusting screw-and-disc type load brake stays clean and dry - eliminating drift and backlash for positive load control. 25° minimum lever stroke allows “micro-inching”
load positioning.
• Hardened steel load chain provides high strength and resists wear. Alloy steel spur gearing is heat-treated for long life and is
lifetime lubricated.
|
 | Little Mule TB602 & TB603 Mini-Lever Hoists
Handy Mini-Hoist - Easy Tool Box Storage
Compact Package with Great Standard Features
• Rated loads of 550 Lbs. (TB-602)and 1100 Lbs. (TB-603)
• Plated load chain is standard.
• Weston-type load brake.
• Rubber hand grip for better comfort and security.
• Forged upper and lower hooks with latches standard.
Tough Construction — Easy Operation
• Impact resistant, all-steel frame, gear case and cover.
• Hardened link-type steel load chain for strength
and long wear.
• Lightweight design for ease of portability. Use in confined conditions with one-hand operation.
• Free wheeling feature serves to quickly attach
the load.
• Metric rated
The uses are endless. Performs just like the larger hoists, but small enough to fit in a hard hat! |
 | Little Mule Cable Hoists
Designed for Reliability, Durability & Versatility
Single & Double Line Cable Hoists • 1000 - 4000 lbs
Engineered for Reliable Operation
• Handle Designed for Overload Protection—Handle bends to warn of hazardous condition and prevent dangerous overload.
• Hooks with Latches—360° swiveling hooks equipped with latches for positive load engagement.
• Positive Load Holding in All Environments—Double interlocking pawl mechanism assures one pawl is engaged at all times.
• Meets or exceeds minimum 4:1 design factor and all requirements of ASME/ANSI Standard B-30.21. All units tested at 125% of rated load.
Portable and Durable
• Lightweight and Rugged—Special cast aluminum and zinc alloy housings.
• Heavy-Duty Cable—Utilizes preformed and galvanized, extra flexible aircraft cable.
• Corrosion Resistant—All stainless steel springs and shafts.
• Reduced Wear—All rotating shafts are mounted on
bronze bushings.
Easy to Operate
• Self-Storing Cable Drum—Provides compact operation.
• Easy Load Positioning—Utilizes a double pawl system with multiple pawl stops for precise load adjustment.
• Fast Cable Take-Up—Winding wheel provided for quick take-up or positioning of cable.
• Open Construction—Allows for easy cleaning and inspection.
• Made in U.S.A.
Special Model Features
• 430CDPA equipped with oversized slip hooks—Ideal for opening and closing boxcar doors.
• Stainless Steel Cable Available—Suitable for marine environments. |
 | Little Mule FLC Electric Chain Hoists
Industrial Duty — Market’s Best for Performance & Value • 1/4 - 2 Ton
Versatile Operation
• Rated loads from 1/4 to 2 Ton Metric Rated.
Standard lifts of 10, 15 and 20 feet. Other lifts
available. CSA approved.
• Voltages — 115/230 - single phase; 230/460, 208, 575 - three phase, 60 Hertz Standard, 50 Hertz available.
• IEC style controls meet or exceed electrical codes.
• H4 Duty Rating — Handles heavy duty work
environments
• Made in U.S.A.
Special Model Features
• Five -Pocket Load Sheave increases chain and sheave engagement 25% over hoists with conventional load sheaves. Provides smoother lifting and reduces chain wear.
• Adjustable limit switches regulate upper and lower load travel. Brass nuts standard for improved repeatability and chain positioning.
• Mechanical Overload Protection Device — Helps protect hoist, operator, and supporting structures form damaging overloads, chain jamming and reverse phasing.
• Multiple Disc Motor Brake — Heavy duty design for reliable operation. Direct acting for positive load holding and spotting.
• Molded quick connect standard chain container prevents slack chain from interfering with operator. 20 Ft. lift single reeved, 10Ft. lift double reeved.
• One Chain Size — All models reduce inventory.
• Top Suspension — Quick-change from hook mount
to lug mount.
• Weather Resistant — Hoist is NEMA 3R enclosure. |
 | Little Mule SLM Electric Chain Hoists 3 Phase
The Perfect Shop Hoist — Easy to Use, H4 Duty • 250 - 1000 Lbs.
The SLM is about 12′′ in length and weighs less than 35 lbs.
Easy to Use
• Small, compact design - commercial & industrial applications.
• Lightweight and portable. Easy installation and maintenance.
• H4 duty cycle (300 motor starts/hour).
• Made in U.S.A.
Special Model Features
• Friction-type overload device prevents lifting excessive overloads.
• 10-pocket oblique lay liftwheel provides longer chain life and extended service.
• NEMA 4 industrial-rated pendant control.
• Lifetime, grease-lubricated gear train—less maintenance.
• Alloy load chain (zinc plated optional).
• Thermally protected motor prevents damage from
possible overheating.
• D.C. braking system for positive load control.
• Durability — Epoxy powder-coat finish on rugged cast aluminum alloy frame. |
| Little Mule SLM Electric Chain Hoists Single Phase - Contactor in Pendant
The Perfect Shop Hoist — Easy to Use, H4 Duty • 250 - 1000 Lbs.
The SLM is about 12′′ in length and weighs less than 35 lbs.
Easy to Use
• Small, compact design - commercial & industrial applications.
• Lightweight and portable. Easy installation and maintenance.
• H4 duty cycle (300 motor starts/hour).
• Made in U.S.A.
Special Model Features
• Friction-type overload device prevents lifting excessive overloads.
• 10-pocket oblique lay liftwheel provides longer chain life and extended service.
• NEMA 4 industrial-rated pendant control.
• Lifetime, grease-lubricated gear train—less maintenance.
• Alloy load chain (zinc plated optional).
• Thermally protected motor prevents damage from
possible overheating.
• D.C. braking system for positive load control.
• Durability — Epoxy powder-coat finish on rugged cast aluminum alloy frame. |
| Little Mule SLM Electric Chain Hoists Single Phase - Contactor in Hoist
The Perfect Shop Hoist — Easy to Use, H4 Duty • 250 - 1000 Lbs.
The SLM is about 12′′ in length and weighs less than 35 lbs.
Easy to Use
• Small, compact design - commercial & industrial applications.
• Lightweight and portable. Easy installation and maintenance.
• H4 duty cycle (300 motor starts/hour).
• Made in U.S.A.
Special Model Features
• Friction-type overload device prevents lifting excessive overloads.
• 10-pocket oblique lay liftwheel provides longer chain life and extended service.
• NEMA 4 industrial-rated pendant control.
• Lifetime, grease-lubricated gear train—less maintenance.
• Alloy load chain (zinc plated optional).
• Thermally protected motor prevents damage from
possible overheating.
• D.C. braking system for positive load control.
• Durability — Epoxy powder-coat finish on rugged cast aluminum alloy frame. |
 | Little Mule LMES Electric Chain Hoist
Easy Hoisting — Compact and Portable • 500 & 1000 Lbs.
Easy to Use
• Rated loads 1/4, and 1/2 ton. 10, and 20 foot lifts standard.
• Rated for light-duty operation; intermittent duty applications.
• Voltage - 115/1/60
• Rigid top hook and swivel bottom hook with latches standard.
• Provided with grounded 3-prong plug for easy installation in any standard 115-volt outlet.
• Made in U.S.A.
Rugged and Portable
• Lightweight and compact to provide strength and portability. Weighs less than 25 lb.
• Hardened steel, self-locking Helicon® gears work as a brake to hold load even if power is interrupted. Permanent lubrication of gears minimizes maintenance.
• State-of-the-art free wheeling mechanism allows quick and easy one-handed take-up and positioning of slack chain.
• Manganese alloy load chain is heat treated for high strength.
Special Model Features
• Upper and lower limit switches regulate load travel.
• Heat treated steel alloy load sheave provides smooth lifting.
• Includes durable, fabric chain container.
• Overload sensor protects against jamming and dangerous overloads. Red light on underside of unit alerts operator if overload is attempted.
• Ergonomically designed push button fits operator’s hand for easy operation. |
 | Little Mule CM ShopAir Chain Hoist
Compact, Powerful, and Precise
• Standard ProtectorTM overload device.
• 10-pocket, oblique lay liftwheel provides longer chain life.
• Rugged cast aluminum alloy hoist frame and Epoxy
powder coat finish provides a durable exterior.
• Durable reduction gearing means reliable operation.
• Variable flow, two lever pendant for precise load spotting.
• Threaded external exhaust for piping away exhaust in clean room or painting applications.
• Industrial duty air motor for tough applications.
• Gear train is lifetime - lubricated with
non-oxidizing grease.
• Hardened forged steel, latch -type lower
hook rotates 360°.
• Hardened forged steel, rigid latch - type upper hook.
• Alloy load chain.
• Maximum pendant drop - 36 ft.
• Made in U.S.A.
CAPACITIES: 250 to 1,000 Lbs.
NORMAL OPERATING PRESSURE: 90 PSI (6.2 bar)
AIR CONSUMPTION: 34 cu.feet/min. |
 | Little Mule CM AirStar Chain Hoists
Compact, lightweight variable speed pneumatic powered hoist.
• Hoistaloy load chain for heavy duty or stainless steel chain for spark resistant, medium duty loads
• Positive action, heavy-duty shoe type brake that holds the load
• Multi-vane rotary air motor for high torque, smooth operation
• Pull cord control hoists provide a lightweight, economical hoist for accurate control of loads, while pendant throttle control offer ergonomic, one-hand control for ease of operation
• Inlet air swivel with built-in strainer provides free hoist movement
• External brake adjustment
• Limit stops prevent over-travel in upper and lowering directions
• Equa-torque gearing of alloy steel, heat treated spur gears are accurately machined to provide a close meshed, compact gear reduction
• Tapped exhaust port 1/2 NPTF for cleanroom applications or to add a supplemental muffler in addition to the built-in muffler for even quieter operation
• Metric rated
• Made in U.S.A.
• Air Consumption: 48 SCFM at 90 PSI (recommended)
• Air Inlet: 3/8 NPTF, Air Supply Hose: 1/2 I.D. min.
|
| Coffing EC Electric Chain Hoist Trolley Suspension
COFFING ECT, ECGT, and ECMT Models - Plain, geared
and motorized trolley suspensions with all the features of basic EC models for added flexibility in a variety of applications.
• PLAIN TROLLEY - For manual positioning of hoist and load.
• GEARED TROLLEY - For more precise positioning of hoist and load. Standard hand chain drop is 2-feet less than lift.
• MOTORIZED TROLLEY - For faster positioning of hoist and load over longer distances. 35 or 75 FPM speeds standard with optional speeds of 18, 24, 50, 100, and 150 FPM.
• VOLTAGES - 115/230, 208 - single phase; 230/460, 208, 220/380, 575 - three phase. 60 hertz standard, 50 hertz available.
• TWO-SPEED MOTORIZED TROLLEY MODELS - Optional with 3 to 1 speed ratio, three-phase, single voltage only.
• WRAP-AROUND SIDE PLATES - Act as safety lugs and as bumpers to protect wheels. Available to fit American Standard I-Beams, wideflange,
and patented track beams. Specify track type and beam size.
• PRECISION TROLLEY WHEELS - Machined, cast iron wheels with sealed, lifetime lubricated ball bearings for extended trolley life.Motorized trolley wheels heat treated for added durability. Bronzeand stainless steel wheels optional.
• TWO TROLLEY DESIGNS - 4-wheel design on 1/4 - 3 ton negotiates 48” minimum radius curve, including patented track applications. 8-wheel design on 4 and 5 ton reduces beam flange stress.
• ACCESSORIES & OPTIONS - Full line available to meet a variety of applications.
• LIFETIME WARRANTY |
| Coffing JLC Electric Chain Hoist Trolley Suspensions
Plain and motorized trolley suspensions with all the features of the basic JLC models for added flexibility in a variety of applications.
• PLAIN TROLLEY - For manual positioning of hoist and load.
• MOTORIZED TROLLEY - For faster positioning of hoist and load over longer distances. 35 or 75 FPM speeds standard - other speeds available. Trolley brake optional.
• VOLTAGES - 115/230 - single phase; 230/460, 208, 380, 415, 575 - three phase, 60 hertz standard, 50 hertz available.
• TWO-SPEED MOTORIZED TROLLEY MODELS - Optional with 3 to 1 speed ratio, three-phase, single voltage only.
• WRAP-AROUND SIDE PLATES - Act as safety lugs and as bumpers to protect wheels. Available to fit American Standard I-Beams, wideflange, and patented track beams.
• PRECISION TROLLEY WHEELS - Machined, cast iron wheels with sealed, lifetime lubricated ball bearings for extended trolley life. Motorized trolley wheels are heat treated for added durability, with bronze and stainless steel wheels optional.
• TROLLEY DESIGN - 4-wheel design negotiates 48” minimum radius curve, including patented track applications (60” for JLCET 2-Ton only). Specify track type and beam size.
• LIFETIME WARRANTY |
 | Yale Global King Monorail Hoists & Trolleys
Capacities: 1 to 15 ton
Yale Global King monorail wire rope hoists are built for the world market and combine over 130 years of experience with the latest in manufacturing and materials technology, rigid design standards and the best quality components available to create a feature-filled, rugged, easily maintained hoist line.
All Yale Global King monorail hoists are metric capacity rated, low headroom, heavy-duty, built to meet and exceed either FEM 2m or 3m duty (similar to ASME H4 or H4+ duty) providing long life in heavy applications with the higher lifting speeds and precise positioning control demanded by industry worldwide.
|
 | Yale Global King Top-Running Trolley Hoists
Some of the many standard features of the Yale Global King Double Girder Trolley:
•Built to meet and exceed either FEM 2m or 3m duty (similar to ASME H4 Or H4+ duty) providing long life in heavy applications.
•Low headroom design provides maximum hook travel.
•Deep grooved rope drum with a standard rope guide.
•200% torque DC hoist motor brake provides quick, positive stops and load holding.
•All Controls housed in NEMA 4/12 enclosure with easily accessible components.
•Geared upper and lower control circuit hoist limit switch.
•Triple reduction, helical, oil-bath lubricated hoist gearing in a cast aluminum gear case.
•Trolley trucks are a heavy-duty steel weldment fabricated from structural steel shapes for maximum positive alignment of the components.
•Trolley wheels are flat-tread, machined steel, hardened to run on ASCE or square bar rail.
•High impact bumpers are standard on all four corners. |
 | Shaw-Box World Series Monorail Hoists & Trolleys
Shaw-Box World Series monorail wire rope hoists are built for the world market and combine over 130 years of experience with the latest in manufacturing and materials technology, rigid design standards and the best quality components available to create a feature-filled, rugged, easily maintained hoist line.
All Shaw-Box World Series hoists are metric capacity rated, low headroom, heavy-duty, built to meet and exceed either FEM 2m or 3m duty (similar to ASME H4 or H4+ duty) providing long life in heavy applications with the higher lifting speeds and precise positioning control demanded by industry worldwide. |
 | Shaw-Box World Series Top Running Trolley Hoists
The Shaw-Box World Series wire rope hoist was created for the world market and
combines over 130 years of experience with the latest in manufacturing and materials
technology, rigid design standards and the best quality components available to create
a feature-filled, rugged, easily maintained hoist.
The World-Series hoist is metric capacity rated, low headroom, heavy-duty, built to meet
and exceed either FEM 2m or 3m duty (similar to ASME H4 or H4+ duty) providing
long life in heavy applications with the higher lifting speeds and precise positioning
control demanded by industry worldwide.
|
| Shaw-Box 700 Series Size 2 Double Reeved Hoists with Motor Driven Trolleys
SHAW-BOX 700 Series wire rope hoists are
designed and manufactured for heavy-duty service,
This workhorse is built to deliver, day-in and day-out,
under tough operating conditions. 700 Series
hoists are built to take even the most demanding job
cycles in stride, yet can be relied upon to handle your
most delicate loads with precision control.
Their compact design, with
high hook lift and closer end
approaches, maximizes hook
coverage within an existing
facility, reducing or eliminating
the need for costly rebuilding or
remodeling. 700 Series.hoists
achieve an unusually high hook
lift, without resorting to design compromises.
This line offers the greatest range of lifting
speeds, controls, headroom and mounting options of any
hoists on the market today. 700 Series hoists are available
in both electric and air powered models. Options include
standard and low headroom, deck and base mounted
models, with a choice of single reeving or true vertical lift.
The lug is integral with the all-steel, one-piece welded frame, and is designed for stationary mounting from an
overheads tructure or with any of our trolley options. |
| CM Lodestar Electric Chain Hoist for Series 635
The balanced, integrated, proven design of the Lodestar has made it the most popular electric chain hoist in the industry. Lodestar gives you more value for your money including:
• Quick change voltage board-change from low voltage to high voltage by simply repositioning receptacle
• Up to 3 ton capacities for heavy-duty industrial applications
• Gear train lifetime lubricated with non-oxidizing grease
• Precision machined and hardened liftwheel with hardened chain guides for precise chain liftwheel fit
• Gearing designed for exceptionally long life and quiet operation
• H4 duty standard
• Rugged control station (NEMA 4X)
• Hoist duty motor, standard Protector overload device and standard screw type limit switches
• Hardened, forged steel, latch type hooks and Hoistaloy load chain for long, dependable service
• Easy to install and maintain
• No special tools required to disassemble
• Lifetime warranty
• Each hoist thoroughly inspected and tested to over 125% of rated load prior to shipment
• Meets ASME B30.16
• Metric rated
• Made in U.S.A.
Special applications
• Harsh environment hoists available for severe duty of plating, galvanizing and washdown applications
• Hoists with climbing capability available for temporary rigging or lifting applications — must be used in inverted position only
• Hoists with creep control allow precise positioning through field adjustment within the time delay range of .05 sec. to 3 sec.
• Articulating suspension 3 ton only |
| CM Powerstar Electric Chain Hoist with Plain or Geared Trolley
Designed specifically as an alternative to wire rope hoists for high speed lifting of loads from 2 to 20 tons in a space saving chain hoist.
• H-4 or better rated duty cycle
• Designed for heavy-duty industrial applications from 2 to 20 ton capacities
• Liftwheel has machined chain pockets and is heat treated alloy steel for maximum strength and wear resistance
• Efficient regenerative braking system avoids heat generation in power train
• Motors up to 7 1/2 h.p. provide a wide range of lifting speeds
• Single or two speed controls. Two speed models operate on 3:1 speed ratio
• Standard adjustable upper and lower screw limit switches
• Standard overload Protector device
• Hoistaloy load chain can be easily inspected for wear and abuse
• True vertical lift
• Factory tested to 125% of rated capacity prior to shipment
• Metric rated except for 10 & 20 ton capacities
• Rugged aluminum alloy hoist frame
• Chain guide surrounds liftwheel
• Machined and hardened steel Helical gears used throughout hoist for optimum performance and mechanical efficiency.
• Extensive use of life-lubricated bearings plus sealed oil bath power train reservoir for minimum maintenance.
• Dual braking system
• Heavy duty, industrial single speed controls include magnetic reversing contactor which operates on 115 volts provided by a control transformer.
• Totally enclosed, ball bearing, 30 minute rated, thermally protected, hoist duty motor is standard.
• Push button control is weatherproof
(NEMA 4 rated).
• Drop of push button control is 4 ft. above hook at lowest position, unless otherwise specified.
• External push button chain strain relief is standard.
• Power cord length is 2 1/2 ft. unless otherwise specified.
• Trolley design permits easy adjustment for installation on a broad range of beam flange widths.
• Trolley wheels have double row, tapered roller bearings plus machined and hardened universal treads to permit operation on American Standard or flat flanged sections interchangeably.
• Spur gearing used in all motorized trolleys for improved efficiency and durability.
• Drop of hand chain on geared trolleys is 2 ft. above hook at lowest position, unless otherwise specified.
• Designed to be maintained “on the beam.”
• Up to 600 lineal feet of chain
• Weatherproof (NEMA3R)
• Lifetime warranty
• Made in U.S.A. |
| CM Powerstar Electric Chain Hoist with Motor Driven Trolley
Designed specifically as an alternative to wire rope hoists for high speed lifting of loads from 2 to 20 tons in a space saving chain hoist.
• H-4 or better rated duty cycle
• Designed for heavy-duty industrial applications from 2 to 20 ton capacities
• Liftwheel has machined chain pockets and is heat treated alloy steel for maximum strength and wear resistance
• Efficient regenerative braking system avoids heat generation in power train
• Motors up to 7 1/2 h.p. provide a wide range of lifting speeds
• Single or two speed controls. Two speed models operate on 3:1 speed ratio
• Standard adjustable upper and lower screw limit switches
• Standard overload Protector device
• Hoistaloy load chain can be easily inspected for wear and abuse
• True vertical lift
• Factory tested to 125% of rated capacity prior to shipment
• Metric rated except for 10 & 20 ton capacities
• Rugged aluminum alloy hoist frame
• Chain guide surrounds liftwheel
• Machined and hardened steel Helical gears used throughout hoist for optimum performance and mechanical efficiency.
• Extensive use of life-lubricated bearings plus sealed oil bath power train reservoir for minimum maintenance.
• Dual braking system
• Heavy duty, industrial single speed controls include magnetic reversing contactor which operates on 115 volts provided by a control transformer.
• Totally enclosed, ball bearing, 30 minute rated, thermally protected, hoist duty motor is standard.
• Push button control is weatherproof
(NEMA 4 rated).
• Drop of push button control is 4 ft. above hook at lowest position, unless otherwise specified.
• External push button chain strain relief is standard.
• Power cord length is 2 1/2 ft. unless otherwise specified.
• Trolley design permits easy adjustment for installation on a broad range of beam flange widths.
• Trolley wheels have double row, tapered roller bearings plus machined and hardened universal treads to permit operation on American Standard or flat flanged sections interchangeably.
• Spur gearing used in all motorized trolleys for improved efficiency and durability.
• Drop of hand chain on geared trolleys is 2 ft. above hook at lowest position, unless otherwise specified.
• Designed to be maintained “on the beam.”
• Up to 600 lineal feet of chain
• Weatherproof (NEMA3R)
• Lifetime warranty
• Made in U.S.A. |
|
Tell your suppliers you found them on ThomasNet
