Abrasives related categories
 | Depressed Center Wheels for Grinding
GOLD Aluminum Oxide or Silicon Carbide AbrasiveApplications Aluminum Oxide Abrasive
A24 - The choice for grinding all types of ferrous metals and various alloy steels.
Silicon Carbide Abrasive
C24 - Ideal for grinding non-metallic materials. Smooths and finishes concrete and masonry surfaces. TechTip
For maximum performance, run the grinder at the ′′Maximum Operating Speed′′ which is marked on wheel.
It is the user′s responsibility to refer to and comply with ANSI B7.1 |
 | Depressed Center Wheels for Light Grinding and Cutting
GOLD Aluminum Oxide Abrasive
ApplicationAluminum Oxide Abrasive
A24 - The choice for cutting and light grinding all types of ferrous metals and various alloy steels.
These wheels can be used for both cutting and light grinding.
Free of FE-S-CL.
TechTip
For best results, hold your right angle grinder at a : 30° angle with 1/4′′ and 1/8′′ thick depressed center wheels.90° angle with 1/16′′, 3/32′′ .125′′ and 1/8′′ thick depressed center wheels.15° angle with saucers and Type 29 wheels.
It is the user′s responsibility to refer to and comply with ANSI B7.1 |
 | Reinforced Cut-off Wheels for Portable Machines
GOLD Reinforcement Aluminum Oxide AbrasiveTechTip
Reinforced cut-off wheels are designed to resist breakage caused by severe cross-bending and are required on any operation where the work is not securely clamped. |
 | Reinforced Cut-off Wheels for Stationary Machines
Gold Reinforcement Aluminum Oxide AbrasiveApplication
Stationary cut-off wheels are used on fixed base machines. TechTip Use Long Life chop saw wheels on machines rated 15 amps or higher.Use Fast Cut chop saw wheels on older, lower powered machines. |
 | Reinforced Cut-off Wheels for Chop Saws
Gold Reinforcement Aluminum Oxide AbrasiveApplication
For use on table-top machines. Ideal for cutting light tubing, angle iron, exhaust pipes and steel extrusions. |
 | Portable Snagging Cup Wheels
Snagging wheels provide consistent, quality performance in foundries, welding shops, fabrication facilities, steel mills and shipyards. |
 | Mounted Points
Premier Red Zirconia Alumina Abrasive
Application
30 grit: deburring, removing weld beads, smoothing and blending welded areas.TechTip
For best suited point performance, always run the mounted point at the maximum allowable speed according to ANSI B7.1. New speeds as defined by ANSI B7.1-2000.
It is the user′s responsibility to refer to and comply with ANSI B7.1
All shapes are supplied with 1/4′′ spindles. |
 | Bench and Pedestal Wheels
Aluminum Oxide AbrasiveApplication
Ideal for removing burs on steel parts as well as sharpening high speed steel cutting tools.
Reducing bushings included. |
 | Resin Fibre Discs
Aluminum Oxide Resin Fibre
Application
The economical choice for rust, bare metal, weld and stainless steel. |
 | Flex-Loc TR and TS Discs
Aluminum Oxide Resin Cloth
Application
For light to medium pressure grinding and deburring, as well as blending and finishing.
TR: Compatible with 3M Roloc attachment system.
TS: Compatible with Standard Abrasives Quick Change attachment system. |
 | Stick-On Discs
ApplicationsIdeal for sanding paints, primers, plastics, and fiberglass was well as whitewood sanding, clean-up and repair.Hand and machine sanding metal primer coasts and between finish coats. Also for whitewood between wash, sealer and lacquer coats.Ideal for stripping all paints and rust, as well as blending welds.Ideal for sanding all ferrous metals. |
 | Vaccum Stick-On Discs
PREMIER RED Aluminum Oxide Dri-Lube Resin Paper Open Vaccum Stick-On
100 discs per rolls.Application
Best choice for sanding all paints, primers, plastics and fiberglass. Also suited for sealer and wash coats in wood furniture. |
 | Grip-On Discs
CARBO GOLD Aluminum Oxide Dri-Lube Resin Paper Open Grip-On Individual Discs
Application
Ideal for sanding paints, premiers, plastics and fiberglass, as well as whitewood sanding, clean-up and repair. |
 | Vaccum Grip-On Discs
CARBO GOLD Aluminum Oxide Dri-Lube Resin Paper Open Vaccum Grip-On
Application
Ideal for sanding paints, premiers, plastics and fiberglass, as well as whitewood sanding, clean-up and repair. |
 | Flap Wheels
Aluminum Oxide Resin ClothApplication
Deliver a consistent finish with a uniform rate of cut. For blending stainless steel, removing flash and parting lines. |
 | Flap Discs
PREMIER RED Zirconia Alumina Resin ClothApplication
Ideal for metal grinding and polishing, especially for weld bead grinding on fine carbon and stainless steel. Tech Tip : Use one grit size coarser than fibre discs, except in 36 grit.Operate flap discs at a 15° - 25° angle; more severe angles will weaken flap edges.
It is the user′s responsibility to refer to and comply with ANSI B7.1 |
 | Portable File Belts
Aluminum Oxide Resin Cloth
Application
Designed for all metal working, finishing and contour and shape sanding applications requiring flexibility and tray resistance. |
 | Portable Belts
Aluminum Oxide Resin Cloth
Application
Ideal for sanding metal and all types of wood. |
 | Stationary Belts
Aluminum Oxide Resin Cloth
Application
Ideal for operations requiring a belt specification that does not generate heat, but is capable of sanding a variety of materials. Closed coat for fast metal removal. |
 | Narrow Belts
Aluminum Oxide Resin Cloth
Application
General purpose belt for sanding ferrous and non-ferrous materials. |
 | Wide Belts
Aluminum Oxide Resin Cloth Open
Application
Includes of finishing of wood and non-ferrous metals. |
 | Sheets
Size 9′′ x 11′′ Sheets
ApplicationsFor hand and machine sanding of paint, primer, plastics and fiberglass, as well as whitewood clean-up and repair.Ideal for removing surface imperfections in acrylic lacquers, enamels, urethanes and clearcoats. Use wet for best results.Ideal for dry sanding of paint primers and light metalsIdeal for producing very fine finishes in wet applicationsExeptional finishing in wet applicationsIdeal for hand sanding, deburring, polishing and removing cutting tool marks on all metal parts.Used for removing light burrs and cleaning and polishing metals.Ideally suited for floor sanding, drywall, ceramics and wet deck sanding. |
 | Fibratex Depressed Center Wheels
Surface Strip Depressed Center Wheels
Application
An open web construction allows cleaning and conditioning of a multitude of materials quickly and easily, with very little loading. Excellent for removal of surface rust and residue, corrosion, light weld splatter, dirt, mill scale and other similar surface contaminants.Major applications include: Preparing surfaces before weldingCleaning and conditioning after weldingSurface preparation before coatings are appliedPaint and epoxy coating removal |
 | Fibratex Discs
Application
Deliver a consistent finish when used to clean, deburr, blend or finish all types of metal, wood and plastic. Can also be used for the removal of light rust, oxidation and coatings. |
 | Fibratex Belts
Surface Blending BeltsApplication
Deliver a consistent finish when used to clean, deburr, blend or finish all types of metal, wood and plastic. Can also be used for the removal of light rust, oxidation and coatings.
Tech Tip :
For removing 60 to 120 grit grindlines - use coarse grit (brown)For removing 120 to 180 grit grindlines - use medium grit (maroon)For removing 180 to 320 grit grindlines - use very fine grit (blue)
It is the user′s responsibility to refer to and comply with ANSI B7.1 |
 | Knot Wire Wheels
Can be used on portable power tools.
Available in the following wire types:Knot wire for low to medium flexibility and aggressive cutting action. Stainless steel wire for use on stainless, aluminum, and high strength alloys.
Primary application: Cleaning, deburring and scale removal. |
 | Pipeline Brushes
Excellent for use in the pipeline industry.
Available in the following wire types:Knot wire provides aggressive action in the removal of bead scale, weld flash, or splatter. Regular twist and stringer bead twist for higher impact action. Stainless steel wire available in stringer bead twist for use on stainless, aluminum, and high strength alloys.
Primary application: Cleaning, deburring, and scale removal. |
|
Tell your suppliers you found them on ThomasNet
