Pumps related categories
 | Aurora 130 Series Turbine
Single Stage Close Coupled Regenerative Turbine Pump. Bronze Ring Construction, Crane T21 Mech. Seal Car/NI/BUNA/SS.
|
 | Albany G & H Series Helical Gear Pumps
Helical Gear Pump. Pedestal Mount. Self Priming. Close grain Cast Iron housing, polished steel shaft, full face thrust bearings in bonze, carbon or cast iron. BUNA, Viton or Teflon mechanical seal.
FEATURES:
Helical Gears for smooth, quiet running.
Self Priming due to close manufacturing tolerences.
Suction lift of up to 20 feet
Can be close coupled or base mounted with pump-motor unit.
Pump housings are of close grain cast iron.
3 Section doweled design insures alignment, efficiency and ease of field service.
Shafts are of ground and polished steel.
Full face thrust bearings are available in bronze, carbon, and cast iron.
Mechanical seals are of Buna, Viton, and Teflon.
EASY MAINTENECE :
The 3-Section design of the Albany Pump combined with the unique slide fit of the bearings makes disassembly of the pump and replacement of individual components easy and simple.
By-pass model pumps ( integral relief valve ) can be converted to plain pumps ( no by-pass ) by interchanging pump covers ( and vice-versa ). The various bearings available can be interchanged in the field to suit the application requirement.
PERFORMANCE:
G Series ( 0-250 PSI )
|
 | CENTRAN G2 Magnetic Drive Centrifugal Pumps
Centrifugal pump without motor.
Notes WR:
Liquid temperature range 23ºF to 176ºF
Specific gravity up to 1.8
Ambient temperature range 14ºF to 104ºF
Notes GF and GX:
Liquid temperature range -22ºF to 230ºF
Specific gravity up to 1.8
Ambient temperature range -4ºF to 104ºF
|
 | CENTRAN G3 Magnetic Drive Centrifugal Pumps
Centrifugal pump without motor.
Notes WR:
Liquid temperature range 23ºF to 176ºF
Specific gravity up to 1.8
Ambient temperature range 14ºF to 104ºF
Notes GF and GX:
Liquid temperature range -22ºF to 230ºF
Specific gravity up to 1.8
Ambient temperature range -4ºF to 104ºF
|
 | Fairbanks Morse 7000 Series Propeller Pumps
High Flow, Low Pressure Fluid Transfer
Features
Propeller
Cast iron or Fabricated Steel Discharge Head
Above or below ground discharge
Various Material Options
Collet or Key Drive
Tull Testing Available
Sealed Lower Bearing
Options
Startup Services and Freight
Travel Expenses for Startup Technician are EXTRA
Taxes, Permits and Other Fees NOT Included
Contact Inside Sales for Sizing Help
|
 | Fairbanks Morse Recessed Impeller Pumps
For solids handling applications - raw sewage, return activated sludge, waste activated, mixed liquor and process liquids.
FEATURES / NOTES
Super XT™ Ni-Hard is harder (nominal 730 BHN) than competitor′s
Class I Ni-Hard (650 BHN)
Shaft Sleeve Options - ceramic, Hardmetal.
NoseCone™ kit for impeller to prevent erosion, corrosion and abrasion.
Packaging Options for mounting (belt drive, direct drive, motors, etc.) available.
Chopper Pump Option Available.
Handles solids concentrations up to 3%
One or Multi Year factory warranty against materials and workmanship.
Startup Services and Freight
Travel Expenses for Startup Technician are EXTRA
Taxes, Permits and Other Fees NOT Included
Contact Inside Sales for Sizing Help
|
|
Tell your suppliers you found them on ThomasNet
