Collectors: Dust related categories
 | PSH SERIES
INDUSTRIAL AIR CLEANERS—
ONE SIZE DOESN’T FIT ALL
Since no single air cleaning technique is able to control
every industrial emissions problem, the engineers at
United Air Specialists (UAS) developed the Smog-Hog®
PSH Series.
This modular system can be constructed in a variety
of sizes to fit your company’s specific dimensional and
application needs. PSH units can be installed indoors
or outside a facility, and use a combination of filtering
processes to precondition and clean even the most
polluted airstreams.
APPLICATIONS
Developed specifically to collect heat-generated organic
vapors and particulate, PSH mist collectors control
hazardous emissions which pose a threat to the environment
and your business. These units are ideal for companies
that need a customized engineered solution for tough
emissions from asphalts, industrial cooking, plasticizers,
manufacturing processes, textiles and rubber. |
 | Models DA, DB and DBM
A simple and
economical solution
for capturing harmful
contaminants.
PRACTICAL AND EFFECTIVE
DA, DB and DBM Media
Bag Dust and Mist
Collectors can help your
plant meet OSHA
requirements for employee
health and safety by
removing contaminants
from the air. Designed as
a simple and economical
solution to collect dry or
wet particles, these systems
collect small, large or
conductive materials. These
multi-purpose units contain
high-efficiency filters ideal
for removing smoke, dust,
oil mist and other pollutants
from a facility.
Offering a practical
and effective solution for
collecting contaminants,
DA, DB and DBM units
come with multiple filtration
options to fit your specific
pollution control needs
such as sub-micronic
substances, oil mist or
odors and gases. The
filters are easy to replace
and clean, and the media
collection surface holds
up to 30% more
contaminants than
comparable products—
which means less frequent
filter changes!
|
 | M660 Oil Mist Collector
The new M660is a self-contained media air cleaning systems designed for source capturing coolant mist applications in industry. The M660 can be ordered in three stage filtration which will effectively remove a broad range of contaminants including mist, smoke, soot, vapors, VOC′s and more at a rate of up to 1300 CFM. |
 | Cartridge Dust Collectors
Contact Dynacom today to learn more about this equipment and Dynacom′s turn-key design and installation services!
800.229.7664 or sales@dynacomonline.com
|
 | Pulse Jet Baghouse Dust Collectors
Contact Dynacom today to learn more about this equipment and Dynacom′s turn-key design and installation services!
800.229.7664 or sales@dynacomonline.com
|
 | Used Dust-Hog SC600 used dust collector (CLICK FOR MORE INFO)
Includes:
- Cleaned and tested
- New filter
- HEPA filter housing (no filter)
- Built-in air compressor (115/1/60)
- Motor starter control panel with cleaning system controls built in
- 600cfm
- 460/3/60
CONTACT FOR QUOTE - 800.229.7664 or sales@dynacomonline.com |
 | Used AQE model M66 used air cleaner
Specs:
- 1500-2500cfm
- 2 HP (230/1/60)
- Metal mesh prefilter and new bag filter (95%)
- Inlet plenum included
CONTACT FOR QUOTE - 800.229.7664 or sales@dynacomonline.com |
 | Used Smog-Hog model SG-4S-HH-M used mist collector (CLICK FOR MORE INFO)
Can be used for the following applications:
- Heavy volume machining mist or oil (coolant or oil)
- Cold heading/forming
- Hydromat
- Plastic smoke
- Rubber smoke
- Asphalt/pitch smoke
Includes:
- 6000cfm with high static capability
- 7.5hp (460/3/60) motor/blower
- Plenum with impingement baffles
- Cleaned and tested filtration components
- Parts replaced as needed
CONTACT FOR QUOTE - 800.229.7664 or sales@dynacomonline.com |
 | Used Dust-Hog/UAS FJL 2 dust collector (Click For More Info)
- 800 cfm
- New filters
- Reverse pulse cleaning system with timerboard and gauge
- Pneumatic filter kit
- 55-gallon drum base arrangement
- 1 HP (480/3/60); includes disconnect (starter not included)
- Two (2) available
CONTACT FOR QUOTE - 800.229.7664 or sales@dynacomonline.com
|
.jpg) | Used Honeyville baghouse dust collector
Can be used for the following applications:
- Woodworking
- Plastics
- Most dry/non-explosive dusts
Note: Please consult NFPA standards for dust collection recommendations for your dust
Includes:
- 4000-7000cfm
- 25hp side-mount blower
- Controls
CONTACT FOR QUOTE - 800.229.7664 or sales@dynacomonline.com |
 | Used Advance Clean Air portable dust collector
Can be used for the following applications:
- Welding
- Grinding
- Coolant mist
- Dry/non-explosive dusts
Includes the following:
- 1000cfm
- 1.5hp (115/1/60)
- 8′′ x 10′L swing arm
- New prefilter & 95% bag filter
CONTACT FOR QUOTE - 800.229.7664 or sales@dynacomonline.com
|
 | Used Donaldson Torit Trunkline T2000 dust collector
Can be used for the following applications:
- Welding
- Grinding
- Most dry/non-explosive dusts
Includes the following:
- 1800cfm
- 5hp (230-460/3/60)
- Magnehelic gauge and pulse cleaning system
- New cartridges
- Two (2) available
CONTACT FOR QUOTE - 800.229.7664 or sales@dynacomonline.com
|
 | Used Micro-Air model OM3500 media air cleaner (Click Here for More Info)
Can be used for the following applications:
- Coolant mist/smoke
- Oil mist/smoke
- Light to medium volume dry/non-explosive dust
Includes:
- New 4′′ prefilter, 95% bag filter, HEPA filter
- Includes 240/3/60 disconnect
- 3hp (230-460/3/60)
- 1000-2000cfm
CONTACT FOR QUOTE - 800.229.7664 or sales@dynacomonline.com
|
 | Used Dust-Hog FJH 80 cartridge dust collector (Click Here for More Info)
Can be used for the following applications:
- Welding
- Grinding
- Bulk powders (follow NFPA recommendations)
- Plastic dust (follow NFPA recommendations)
- More
Specs:
- 30-40,000cfm
- 18080ft2 media
- Abrasive inlets
- (2) 50hp blowers with dampers
- Ductwork connecting unit to blowers
- Drum bases with slide gates
- Cleaning controls
CONTACT FOR QUOTE - 800.229.7664 or sales@dynacomonline.com
|
 | Uni-Wash Wet-Type Dust Collection Systems
Uni-Wash wet-type dust collectors are self-contained, water recirculating type units for removal of most industrial and foundry dusts from exhaust system air. Dirt, lint, grindings, sanding, finishin dust and other contaminants that do not float in water are all thoroughly washed out and trapped as wet sludge.
Along with being able to handle most industrial dust applications, Uni-Wash wet-type dust collectors are specifically recommended by the NFPA for the capture of dusts created in the finishgin of all combustible metals, such as aluminum, titanium, lithium, zirconium, and tantalum. |
|
Tell your suppliers you found them on ThomasNet
