Oil Separators related categories
 | EndurAir™ - Rotary Screw Air Compressors (5–20 HP, 60Hz)
Load/No Load Control
Compact
The EndurAir Series is more reliable, economical and compact—perfect
for point-of-use placement in even the most rugged conditions.
Durable
With tens of thousands of Enduro airends in operation worldwide, we’re not just talking about durability, we’ve proven it. The air end
has been in the marketplace for years with failure rates well below world class standards.
Performance Driven
This load/no-load compressor is managed by a new microprocessor controller. It monitors and regulates the number of starts per hour
and controls the unloaded periods. In short cycling situations, the starts are delayed—minimizing energy consumption and optimizing
performance of the compressor.
Efficient
A newly designed inlet valve for this “tried and true” compressor optimizes electrical consumption whether the compressor is fully loaded or unloaded.
Service Friendly
The design of the EndurAir makes general maintenance a snap and ensures minimal downtime. One-piece removable side and rear panels
provide easy access to critical service points—including the drive belts, pulleys and the spin on oil filter and oil separator.
Proven Results
Gardner Denver product development is a balance of technology, efficiency and performance—all focused on meeting your demand for compressed air. |
 | RNC Series - Refrigerated Air Dryers (10–3000 scfm)
Global Air Treatment
RNC Series refrigerated air dryers are engineered to benefit you today and tomorrow from the tradition of durability that is Gardner Denver.
Quality components and engineering excellence meld to ensure you of a stable 38°F +/-4°F
pressure dew point. These exclusive compressed air preparation packages combine reliability, cutting-edge design, and innovative packaging into a single space saving unit. The air quality delivered from an RNC Series dryer may define the difference between moderate and superior results from your plant’s processes or systems.
RNC Series dryers benefit you with:
1. Four levels of Intelligence Controller (I-Controller) packages to allow you to
customize the RNC Series dryers to meet your specific requirements.
2. Select Heat Exchanger arrangements to ensure you get the right combination
of value and efficiency in every size.
This secures your investment today and tomorrow with energy efficiency.
3. Combination Separator/Filter that incorporates our 99% efficient 3 micron
Grade B elements. This ensures you of consistent water removal (especially under low flow conditions). |
 | RSD Series - Energy Saving Refrigerated Air Dryers (800–3000 scfm)
Global Air Treatment
Many years ago, Gardner Denver set the standard for energy efficient rotary screw air compressors. The goal was to combine the rugged simplicity of the screw compressor with the energy efficiency of the big old reciprocating compressors. We called the new technology the TurnValve™ and introduced it with the Electra-Saver® Air Compressors. Now, almost half a century later, the legendary Electra-Saver® is still one of the most energy efficient designs your money can buy for plants with changing air demands.
Today, Gardner Denver continues that tradition of providing energy saving solutions to help you increase profits and reduce power costs. Challenges for energy efficiency and dew point stability are answered with a technological breakthrough in energy efficient refrigerated air dryer design. We call this energy saver the RSD Series and it is unlike any energy efficient compressed air dryer technology you have ever seen. Only the RSD Series Digital Scroll Refrigerated Air Dryers offer you.
Dew Point Stability: 38°F from 0%-100% of rated flow
Energy Savings: up to 91% power reduction
Simplicity: less moving parts for maximum reliability
Notes:
a. All models utilize R404a refrigerant with Digital Scroll compressors.
b. All models utilize a standard electric demand drain.
c. Second electric demand drain is standard when optional integrated Grade E oil removal filter is selected.
d. Maximum Operating Pressure 200 psig (14 bar), Maximum inlet temperature: 120°F (49°C).
All models are UL/CSA certified. |
 | CTS Series - Eliminator II, Oil Water Separators
The new CTS Eliminator II has been designed as an effective and reliable means of treating lubricant contaminated compressor condensate.
Compressed air is discharged at elevated temperatures in a saturated condition. Any cooling which takes place through aftercoolers, dryers, or
pipelines cause the water vapor to condense into a liquid form, which then mixes with any oil carryover of a machine. This contaminated condensate cannot
be disposed of into sewer systems, or onto the ground, without being properly treated.
|
 | HPR Series - Non-cycling Refrigerated Air Dryers 5 to 500 scfm
Refrigerated Compressed Air Dryers
Dry Compressed Air - Pure & Simple
HPR Series Refrigerated Air Dryers Improve Productivity
Hankison delivers the right solutions for compressed air treatment. HPR Series non-cycling refrigerated compressed air dryers offer the right combination of technology and simplicity to keep your air system at a dry, 38°F (+3°C) pressure dew point, from 5 through 500 scfm. All HPR Series dryers are built for durability, in a space-saving design. Sturdy sheet steel is formed and protected by an epoxy-based powdercoat finish. Reliable reciprocating refrigeration systems use environmentally friendly R-134a refrigerant. R-134a is known for its ability to maintain stable temperatures to protect the integrity of the 38°F (+3°C) pressure dew point. HPR Series can handle the pressure.
Models HPR5-10 through HPR50 Feature:
Integral Moisture Separator
Timer operated drain with isolation valve/strainer (float drain on HPR5-10
Models HPR5-10 and HPR15 designed to adapt to legacy Hankison HVAC installations
On/off switch illuminates when the compressor is on
Models HPR75 through HPR500 Feature:
Integral 304 stainless steel heat exchanger, mesh demister and moisture separator for long life
Timer operated drain includes isolation valve/strainer to protect valve from rust and scale
Panel mounted drain timer controls (HPR200-500)
LED style dew point indicator (HPR200-500)
Panel filter captures ambient dirt and dust to keep condenser clean (HPR100-500)
Hankison provides customers with reliability and clean, dry compressed air at an affordable price. No fancy bells and whistles - just dry air, pure and simple.
|
 | HES Series ColdWave™ - Stable 38°F (3°C) dew points
ColdWave™ Energy Savings Refrigerated Dryers
The HES Series features groundbreaking technologies for the refrigerated compressed air dryer industry.
Digital Evaporator Technology continues the Hankison tradition of stable 38°F (3°C) dew points. Unlike anything in the industry, the HES Series, with patented Digital Evaporator Technology, offers energy saving advantages over traditional non-cycling, cycling and variable speed designs. Hankison technology platforms of heat exchangers, filtration and refrigeration are CSA and UL certified, represent the best value solution available for heavy-duty air demand profiles.
Rapid Return-On-Investment (ROI)
The HES Series is designed to provide a rapid return on investment by:
Reducing the dryer′s energy consumption down to 9% (91% savings) at 0% load
Precise matching of average air flow (heat load) with the required input kW power...No More...No Less
Qualifying for energy rebates offered by utility companies
Maintaining a stable 38°F (3°C) dew point with no dew point spikes
The HES Series Refrigeration System
Patented Digital Evaporator Technology controls the actions of the three core components in the refrigeration system (Digital Evaporator, Digital Control board, Digital Scroll refrigeration compressor) to provide true load-matching energy savings while maintaining a very stable 38°F (3°C) dew point.
Air Treatment Station Features:
HF Series Grade 9 Coalescing Separator/Filter
Integrated HF Series Grade 5 Cold Coalescing Oil Removal Filter (optional)
Dedicated Electronic demand drain(s) for the integrated separator/filter and for the optional oil removal filter
RS-232 Communication Port Space savings with dryer (no pre-filter required) and after-filters all in one cabin
Hankison crafts quality refrigerated dryers engineered to match the specific air demands of your compressed air system.
|
 | HIT Series - Air Dryers, High Temperature Air to 180°F, 82°C
High Inlet Temperature Refrigerated Dryers
A Hankison HIT Series Dryer is Designed and Built to Run Reliably for Years
HIT (High Inlet Temperature) refrigerated compressed air dryers are compact with highly efficient heat exchangers, no internal mesh to foul. Heat exchange efficiency is increased by creating helix flow paths in counterflow arrangement. The two stage separator/filter removes condensed oil and water over a wide range of flows. A reliable condensate drain - air operated - automatically discharges water and oil from dryer without air loss and no timer to adjust. Our automatic refrigeration temperature control system maintains precise chilled air temperature that never needs to be adjusted for load, ambient or seasonal changes. No freeze ups! A Hermetic refrigeration system requires no maintenance & no adjustments - it operates as reliably as your home refrigerator.
Since 1948, industry leaders around the globe have relied on Hankison to deliver the right solutions for compressed air treatment. Hankison′s HIT Series dyers deliver cool, dry and clean air for your compressed air system in one, compact easy-to-use package.
Cools, accepts high temperature air to 180°F, 82°C directly from your air compressor, no separate aftercooler and separator required
Dries, removes moisture, eliminates troublesome water from downstream air lines and equipment
Cleans...an integral 3 micron filter removes solid contaminants and 60% of oil aerosols. (For virtually oil free air, Hankison high efficiency oil removal filters are available.)
|
|
Tell your suppliers you found them on ThomasNet