Batteries: Emergency Lighting & Standby Power related categories
 | SBS (Sealed) Ni-Cd Rechargeable Batteries
Whether your application is for an emergency lighting system or cordless power tool, SBS can design the best battery package for your device and develop inventory, consignment & JIT delivery programs to meet your manufacturing requirements. SBS can assist you in selecting the proper chemistry & cell design for your particular needs. Perhaps your device needs more power, a faster recharge or a lower self-discharge. Rather than selecting from a limited inventory of items, SBS can custom manufacture a battery solution for your needs often less expensively than your existing ′′off the self, one size fits most battery′′. SBS can performance tune a battery package exclusively for you so that your product can obtain a compeititve or preferential position within its market. Not satified with providing just a superior product, SBS coordinates warehousing, 3PL, run rates, minimum on-hand quantities & re-order points with your inventory management system. Typicaqlly our prototypes can be produced within 72 hours of your design submission. SBS maintains a high level of expertise in chemistry ranging from lead-acid, nickle-metal hydride, nickle-cadmium, polymer to thyniol-chloride. We generally produce prototypes within 72hrs of your request & can begin production upon your approval. |
 | SBS Valve Regulated Ni-Cad Batteries VRPP Series
VRPP (valve regulated pocket plate) batteries were designed to meet the needs of applications requiring the traditional high reliability of nickel cadmium pocket plate cells without the need to top-up with water. The VRPP battery works on the oxygen recombination principle and therefore has a much reduced water consumption. The level of recombination of these cells is 85-95%. Normal vented type cells will have only a 30-35% recombination efficiency. When the VRPP cells are properly float charged (between 1.41-1.43vpc) they will not need to be topped off with water for nearly 20 years. If the levels do become low during the life of the battery there are provisions to add water to the cells. The VRPP batteries are available in 1.2V single cells or 2.4V or 3.6V multi-cell blocks. SBS’s VRPP batteries are supplied with the electrolyte, intercell connectors, related hardware and accessories required for normal operation and maintenance |
 | SBS UPS Series Batteries
The High Rate “HR” series batteries employ thin plate technology. These AGM Valve Regulated Lead Acid (VRLA) batteries are designed for high rate discharges were a sealed battery is needed. The UPS Series is similar to the Dynnasty MaxRate(MR), the Power Battery TC12, & Enersys Datasafe HX (Hawker). The UPS series is designed to be used with any conventional UPS system such as Powerware, Liebert, Mitsubishi, APC & MGE. A 10 yr warranty is offered with the first 3 years at 100%. We also produce intermediate capacity sizes so that you do nopt need to pay for more runtime than you require. There are 16 - 12v sizes ranging from 24wpc to 800wpc & 2 - 6v sizes from 720wpc to 770wpc. The nature of UPS installations has compelled us to make flame retardant polypro cases a standard feature at no increase in price, not an optional price adder. For other SLA battery applications, review our AFT top access, our AGM front access telecom or the S Series general purpose SLA batteries. |
 | SBS S Series Batteries
The sealed construction of the SBS ′S′ Series VRLA battery allows trouble-free, safe operation in any position. There is no need to add electrolyte since absorbant glass mat (AGM) technology is used to suspend the elctrolyte. Gases generated during charging are recombined in a unique “Oxygen Cycle” that virtually eliminates water evaporation while reducing any hydrogen gas production to levels that are within all domestic & international safety standards. The S Series are general purpose designed to serve in emergency lighting, broadband, telecommunications, security, switchgear, control systems as well as mobility applications. The S series is backed by a 10 year pro-rated warranty & is produced in 12v & 6v jars from 1.3 to 200A/hr capacities. The S Series also utilizes pure lead-tin in a calcium alloy resulting in an improved performance accross its useful service life at no additional cost. |
 | Railway & Transportation Signaling Batteries
Storage Battery Systems offers a wide variety of railway, transportation & signalling batteries, battery system and chargers for engine starting, emergency braking, lighting, HVAC, radio communications, access control and as prime mover power solutions for the transportation industry. These include charging & battery systems for mass transit, rolling stock, street traffic control & line-yard signaling. Whether remotely deployed under extreme conditions such as a siding signal-switch or within the communications center as computer power back-up, the SBS solution will deliver the performance and service life required from your most demanding applications. Contact us for specifying, applications engineering and quotations. |
|
Tell your suppliers you found them on ThomasNet