Burners: Gas related categories
 | BBG Gas Beta Burner
Hauck′s BBG Gas Beta Burner is designed for exceptionally long life in continuous or intermittent operation in furnace, kiln and dryer environments. The BBG is well suited for applications operating under backpressure. Burner capacities range from 2.2 million to more than 87 million Btu/hr (645 to 25,500 kW). Preheated air versions are available up to 900°F (480°C). The BBG is designed to operate on any clean industrial fuel gas with a higher heating value of 500 Btu/scf (19.7MJ/nm³) or greater with ambient or preheated combustion air. Available with a converging alloy tile for ambient combustion air only for temperatures up to 1800°F (980°C), and converging or diverging refractory tiles for temperatures up to 2800°F (1540°C). |
 | Ecomax® Direct-Fired Self-Recuperative Metallic Gas Burner
Hauck and LBE are jointly offering the Ecomax® direct-fired self-recuperative metallic gas burners for high temperature furnace applications in the US market. Equipped with an eductor system, the burner is capable of 100% exhaust gas removal. The high temperature alloy recuperator is designed to allow for maximum combustion air preheat which results in efficiencies up to 70% for maximum fuel savings. Capable of firing any clean industrial fuel gas with a higher heating value of 500 Btu/scf (19.7 MJ/nm3) or greater, the Ecomax® is available in five sizes with capacities from 57,000 to 945,000 Btu/hr (15 to 250 kW) for process temperatures up to 2100°F (1150°C). Higher temperature and low NOx emissions versions are available. |
 | ISER Single Ended Recuperative Burner for Immersion Firing
Hauck′s ISER immersion burner represents the latest burner technology for liquid aluminum and zinc heating with high thermal efficiency, durability, and reduced NOx emissions. The design incorporates Hauck′s highly successful SVG burner technology for excellent turndown capabilities, proven performance, and reliable direct spark ignition. The burner combustor/recuperator is made of silicon carbide, providing long component life. |
 | NMG Nozzle Mix Gas Burners
Designed for applications requiring a general purpose long life, low maintenance gas burner. Performs equally well firing on-ratio, with excess fuel or with excess air. NMG-H model utilizes preheated air to 800°F. All models can be converted for oil and gas firing. Mounting plate and tile included with burner. NMG capacity range: 224,000 to 25 million Btu/hr @ 16 oz. |
 | PBG Packaged Gas Burners
Designed for simple installation and factory set for ease of operation, the Hauck packaged gas burner can be used for many process heating applications. With a nominal 40 to 1 thermal turndown capability, it is an ideal choice for heat processes that require rapid heat ramp rates with no temperature overshoot. The PBG has all of the necessary components for a high turndown combustion system in one assembly. |
 | RKG Radiant Cone Gas Burner
The Hauck RKG radiant cone burner is designed for applications requiring even heat distribution with a short flame length. The short flame allows the burner to be placed close to the load. The RKG burner is available in six sizes, with a capacity range of 177,000 to 2.3 million Btu/hr (47 to 611 kW). RKG hot air versions are available for preheated air up to 800°F (425°C). |
 | WHG Wall Hugger Gas Burner
The Hauck WHG wall hugger burner is designed for applications requiring even heat distribution with no flame impingement. The flame hugs the wall, allowing the burner to be placed close to the load. The WHG burner is available in six sizes, with a 16 osig (6,900 Pa) capacity range of 175,000 to 2.3 million Btu/hr (47 to 611 kW). WHG hot air versions are available for preheated air up to 800°F (425°C) |
 | WHG Package Wall Hugger Gas Fired Burner
Specially designed for single burner roof fired applications, the WHG Package has all the benefits of the Hauck WHG burner in a complete combustion unit. Particularly well-suited to replace electric heating elements in small aluminum holding furnaces. Capacities range from 333,000 to 1,063,000 Btu/hr (88 kW to 281 kW). Capacities @ 10% excess air and blower motor operation @ 75Hz. |
 | BBC Gas/Oil Combination Beta Burner
Hauck′s BBC Gas/Oil Combination Beta Burner is designed for exceptionally long life in continuous or intermittent operation in furnace, kiln and dryer environments. The BBC is well suited for applications operating under back pressure. Burner capacities range from 2.5 million to more than 100 million Btu/hr (730 to 29,300 kW). Preheated air versions are available up to 900°F (480°C). The BBC is designed to operate with all types of industrial fuel oils, including heavy oils, and with all industrial fuel gasses with or without preheat. The burner can fire with diverging tiles or converging tiles for shorter, higher velocity flames. |
 | SVG Super Versa Tile Gas Burner
Hauck′s modern SVG Super Versatile Gas Burners are designed for applications that benefit from intensive combustion gas recirculation, increased efficiency, improved temperature uniformity, and substantially reduced emissions. Offered in three separate series. The 100 series has full capacity at 16 osig (6,900 Pa) while the 200 series reaches the same capacity at an air inlet pressure of 8 osig (3,450 Pa). The ′E′ series has the rating of the 200 series with metric air and gas connections. Available in a variety of tile materials and configurations, the SVG burner family includes medium and high velocity models. SVG burners reliably and dependably fire any clean industrial fuel gas over a wide operational range from excess air to excess fuel. |
 | TriOx Triple Air Staged Ultra Low NOx Burner
Hauck’s TriOx burner is ideally suited for aluminum furnaces, steel reheat furnaces, thermal fluid heaters, and other high temperature heat processes requiring ultra low NOx emissions. The burner’s three-staged air injection maximizes production efficiency while minimizing NOx and CO emissions. Low excess air operation (5%) results in outstanding fuel efficiency. The TriOx fires any clean industrial fuel gas with a higher heating value of 500 Btu per cubic foot (19.7 MJ/nm³) or greater with ambient or preheated combustion air. |
 | EJC EnerJet High Velocity Gas/Oil/Combination Burners
The Hauck EJC burner promotes high velocity recirculation of heated gases for temperature uniformity and efficiency. It will burn any clean industrial fuel gas, No. 2 fuel oil, or a combination of gas and oil with the same performance characteristics on oil as on gas. Turndown, excess air and excess fuel are excellent on either fuel. The EJC is available in four sizes from 370,000 to 3,700,000 Btu/hr (108 to 1,080 kW). Also available in preheated air versions to 800°F (425°C), and in medium velocity versions. |
 | ECO-Star II Packaged Low NOx Multi-Fuel Burner
The Eco-Star II continues Hauck′s high quality commitment to the latest generation of combustion alternatives for industry. Maintaining the same excellent burner stability as its EcoStar predecessors, the Eco-Star II offers design and performance advantages while still being service accessible and simple to install. This burner supports a variety of liquid and gaseous fuels offering flexibility for optimizing fuel costs. The EcoStar II is available with low pressure atomization for light fuel oil or LP, or high pressure compressed air atomization for heavy fuel oils or installations located at high elevations. Emissions of NOx, CO and VOCs are minimized with proven, state of the art technologies. |
 | NMC Nozzle Mix Gas/Oil Combination Burners
The Hauck NM nozzle mix burners are designed for applications requiring a general purpose, long life, low maintenance burner. Fires most gaseous fuels, No. 2 oil or gas/oil combination. Preheated air models to 800°F (425°C). |
 | STARJET Open-Fired Multi-Fuel Burner
The StarJet burner is one of Hauck′s most durable and efficient burners. The StarJet provides flame stability over its wide operating range eliminating the need for refractory ignition tiles or combustion chambers. The burner fires all commercial grades of fuel oil, natural gas, or LP gas. Liquid fuels require the use of a 36 osig blower. As a combination burner, the StarJet will burn any two fuels in combination-with the exception of liquid LP gas and fuel oil. With fuel efficiency and superior performance, the StarJet burner delivers. |
 | SVC Super VersaTile Combination Burner High Velocity Square Refractory Tile
The SVC Super VersaTile Combination burner is designed for applications that require dual fuel flexibility without sacrificing the advantages of combustion gas recirculation, increased efficiency and improved temperature uniformity resulting from high exhaust gas exit velocity. Designed to fire on light fuel oil through No. 2 or any clean industrial fuel gas, the SVC is available in sizes ranging from 400,000 to more than 2,200,000 Btu/hr (117 to 645 kW). |
 | 780 PAC-L Series Self-Proportioning Combination Gas Oil Burners
The Hauck 780 PAC-L Series Burners are self-proportioning, Combination gas-oil fired burners designed for highly efficient operation using low pressure atomizing air. The 780 PAC series can be fired on No. 2 through No. 6 fuel oil or any clean commercial fuel gas with sealed-in capacities from 200,000 Btu/hr to 14,000,000 Btu/hr. Higher capacities available with induced air. |
 | WRC/WRO Wide Range Burners
Wide Range Burner Units designed for oil or gas/oil firing and both pressurized and nonpressurized applications. The output capacity is twice that of a 780 series burner and turndown range is greatly increased. These advantages are accomplished by supplying controlled combustion air through the burner and around the burner nose. Air flows are separately valved but jointly controlled. Where there is much excess air, such as in air heater, the fuel capacities can be increased by as much as 2.5 times sealed-in stoichiometric capacity. |
 | JAG Jet Air Gas Burner
The Hauck JAG Jet Air Gas Burner is specifically designed for homogenizing and solution heat treating applications. At the heart of the JAG design is the proven reliability of the SVG burner family which provides excellent stability and performance. The integral firing tube provides the flame with complete protection from recirculation air cross velocities typically present in homogenizing and heat treat applications which can result in high carbon monoxide (CO) emissions. In combination with the high exit velocity of the JAG burner, the furnace gas recirculation and flame protection features of the firing tube provide low NOx and CO emissions. The JAG is direct spark ignited and can be flame supervised with a flame rod or UV scanner. The burner’s combustor, firing and recirculation tubes are constructed from temperature resistant stainless steel alloys. Additionally, the modular construction allows for easy installation. |
 | BIC ZIC Gas Burner
The BIC and ZIC burners are suitable for use on gas fired industrial furnaces, ceramic kilns and ovens. Both are appropriate in the iron and steel, non-ferrous metals, precious metals, ceramic, glass and food industries. The BIC and ZIC burners utilize a lightweight tube manufactured from a high quality SiC silicon carbide. The silicon carbide tube is well-suited for installations using ceramic fiber insulation and brick linings. |
 | BIO ZIO Gas Burners
The BIO and ZIO burners are for use on gas fired industrial furnaces, ceramic kilns and ovens. They are for application in the iron and steel, non-ferrous metals, precious metals, ceramic, glass and food industries. The BIO and ZIO burners utilize an alloy burner tube as the combustion chamber. The burner can be extended to suit application requirements. |
 | WHI - Wall Hugger Low NOx Burner
Hauck’s WHI Wall Hugger Invisiflame® burner is designed for applications requiring even heat distribution with no flame impingement AND low NOx emissions. The flame hugs the wall, even at high turndown ratios, allowing the burner to be placed close to the load. The WHI’s three-staged air injection design maximizes production efficiency while minimizing NOx and CO emissions. Low excess air operation (5%) results in outstanding fuel efficiency. The WHI fires any clean industrial fuel gas with a higher heating value of 500 Btu per cubic foot (19.7 MJ/nm3) or greater with ambient or preheated combustion air. |
 | RFG - RadiFlame Radiant Tube Gas Burner
Hauck’s RFG radiant tube burners provide reliable ignition, flame stability and uniform heat distribution in all radiant tubes. The fixed spin plate construction allows for specific and repeatable air flows with a standard flame length relative to the burner’s capacity. RFG burners are available with capacities from 200,000 to 1,200,000 Btu/hr (58 to 317 kW). The RFG fires any clean industrial fuel gas with a higher heating value of 500 Btu per cubic foot (19.7 MJ/nm3) or greater with ambient or preheated combustion air. |
|
Tell your suppliers you found them on ThomasNet