The ENVIRO is designed to separate oil from condensate, which has been extracted from compressed air systems up to 1.8 m3/min or 65 cfm. Small or low cost compressed air systems require low cost separation solutions. The ENVIRO has been designed specifically for such economy applications.
The PURO is designed to separate oil from condensate, that is extracted from compressed air systems. The PURO condensate separator covers compressor capacities up to 8m/min (300 cfm). Polypropylene has the perfect effect on oil. It attracts oil and captures it, almost as if it draws oil like a magnet. That simplicity and our technology are at the root of the PURO′s efficiency to clean virtually all types of condensate (emulsified or not). The typical output oil residue value is less than 10 ppm. All PURO models can accept condensate discharge from intelligent drains, timer drains, float drains and manual drains. Additional condensate can also be manually added.
Features * No de-rating or over-sizing (no complicated sizing charts required) * Will handle and separate mineral oil, synthetic oil and stabile emulsions * Is applied on capacity of compressed air systems up to 8m/min (300 cfm) * Does not incorporate/require a condensate settling tank. * TEST valve for sampling purposes. * Simple to install * Easy to maintain * Rugged PE housing * Small compact design * Can be shipped via UPS
The Grand is designed to separate oil from condensate, that is extracted from compressed air systems. The Grand condensate separator covers compressor capacities up to 35m3/min (1250 cfm). Polypropylene has the perfect effect on oil. It attracts oil and captures it, almost as if it draws oil like a magnet. That simplicity and our technology are at the root of the PURO′s efficiency to clean virtually all types of condensate (emulsified or not). The typical output oil residue value is less than 10 ppm.
Features * No de-rating or over-sizing (no complicated sizing charts required) * Will handle and separate mineral oil, synthetic oil and stabile emulsions * Is applied on capacity of compressed air systems up to 35m3/min (1250 cfm) * Does not incorporate/require a condensate settling tank. * TEST valve for sampling purposes. * Simple to install * Easy to maintain * Rugged PE housing * Small compact design * Can be shipped via UPS
Add the Xtender to the PURO GRAND to achieve the desired capacity requirements. The PUROGRAND Xtender condensate separator covers a compressor capacity up to 70m3/min (2500 cfm) with a typical output oil residue value is less than 10 ppm. The PURO GRAND Xtender can be installed in an in-line configuration or in a corner set-up.
Features * No de-rating or over-sizing (no complicated sizing charts required) * Will handle and separate mineral oil, synthetic oil and stabile emulsions * Is applied on capacity of compressed air systems up to 70/min (2500 cfm) * Does not incorporate/require a condensate settling tank. * TEST valve for sampling purposes. * Simple to install * Easy to maintain * Rugged PE housing * Small compact design * Can be shipped via UPS
The Midi is designed to separate oil from condensate, that is extracted from compressed air systems. The Midi condensate separator covers compressor capacities up to 20m3/min (750 cfm). Polypropylene has the perfect effect on oil. It attracts oil and captures it, almost as if it draws oil like a magnet. That simplicity and our technology are at the root of the PURO′s efficiency to clean virtually all types of condensate (emulsified or not). The typical output oil residue value is less than 10 ppm.
Features * No de-rating or over-sizing (no complicated sizing charts required) * Will handle and separate mineral oil, synthetic oil and stabile emulsions * Is applied on capacity of compressed air systems up to 20m3/min (750 cfm) * Does not incorporate/require a condensate settling tank. * TEST valve for sampling purposes. * Simple to install * Easy to maintain * Rugged PE housing * Small compact design * Can be shipped via UPS
PURO Mini - Oil/Water Separator The PURO MINI is designed to separate oil from condensate that is extracted from compressed air systems. The PURO MINI condensate separator covers compressor capacities up to 125 CFM.
The separation method of the PURO MINI is the same as its larger family members and therefor offers true condensate separation values for the smaller compressor applications.
Product features: Separation of mineral lubricants Separation of synthetic lubricants Any type of drain can be applied
The PURO Mini is designed to separate oil from condensate, that is extracted from compressed air systems. The PURO Mini condensate separator covers compressor capacities up to 3.5m/min (125 cfm). Polypropylene has the perfect effect on oil. It attracts oil and captures it, almost as if it draws oil like a magnet. That simplicity and our technology are at the root of the PURO′s efficiency to clean virtually all types of condensate (emulsified or not). The typical output oil residue value is less than 10 ppm. All PURO models can accept condensate discharge from intelligent drains, timer drains, float drains and manual drains. Additional condensate can also be manually added.
Features * No de-rating or over-sizing (no complicated sizing charts required) * Will handle and separate mineral oil, synthetic oil and stabile emulsions * Is applied on capacity of compressed air systems up to 3.5m/min (125 cfm) * Does not incorporate/require a condensate settling tank. * TEST valve for sampling purposes. * Simple to install * Easy to maintain * Rugged PE housing * Small compact design * Can be shipped via UPS
Tell your suppliers you found them on ThomasNet
