Gages: Oil related categories
 | Level Gages Round Nylon - Elbow & Straight
Level Gages Round Nylon - Elbow & Straight are made for applications requiring horizontal inlets.
UNION COUPLING GAGES are made for applications requiring horizontal inlets and where clearance from obstructions do not permit rotating the gage for mounting. STRAIGHT LEVEL GAGES are made for applications requiring vertical inlet and permit direct mounting for quick response of fluid level.
These gages are made of tough, transparent, trogamid nylon bodies. They allow visual observation of liquid level and liquid clarity from all sides and angles. The transparent sights are compatible with many fluids, and they will retain their clarity through various temperature changes. The tough trogamid nylon can withstand a tremendous amount of duress, thus eliminating the hazards of glass breakage experienced on conventional designs.
The gages are used on tanks, reservoirs, hydraulic equipment, presses, large motor bearings, pillow blocks, and in other applications where it is necessary to guard against a low liquid level.
® Viton is a registered trademark of Dupont Dow Corp.
Patent Number: 6,532,815 |
 | Level Gages Flush Flexible
Level Gages Flush Flexible have a plastic sight which can readily follow the contour of curved surfaces, allowing maximum low liquid level readings, eliminating the necessity of special designs. These gages can be mounted flush against the outside surface of a liquid reservoir. This line of gages offers maximum visibility at low cost.
Liquid level gages for flush mounting are used for a multitude of applications, such as on tanks, reservoirs, packaged hydraulic equipment, large steel mill pumps, hydraulic presses, and for any other application where it is desirable to indicate liquid levels.
The plastic sights used are of clear, heavy walled, vinyl tubing and are shatterproof. They offer excellent chemical resistance to most fluids.
These gages are used to determine the liquid level inside a metal tank by visual observation of the level in a transparent sight. The clarity and condition of the liquid can also be checked. Models with a thermometer will also show the temperature of the liquid as well.
Back mounting gages are used on tanks permitting access to the inside in order to fasten the nuts on the mounting studs, inserted in drilled holes in reservoirs. Front mounting gages are used on reservoirs which do NOT permit access to the inside, therefore, the tank must have two tapped holes, 1/2 - 20, N.F. to receive the mounting studs which are fastened from the outside. |
 | Level Gage Flush Rigid Plastic
Level Gage Flush Rigid Plastic can be mounted flush against the outside surface of a liquid reservoir with only a small amount of protrusion.
Liquid level gages for flush mounting are used for a multitude of applications, such as on tanks, reservoirs, packaged hydraulic equipment, large steel mill pumps, hydraulic presses, and for any other application where it is desirable to indicate liquid levels.
Liquid level gages are used to determine the liquid level inside a metal reservoir by visual observation of the level in a transparent sight. The clarity and condition of the liquid can also be checked. Models with a thermometer will also show the temperature of the liquid.
Break resistant level gages show the liquid level clearly from all sides. These gages are made of clear, transparent, almost unbreakable Trogamid nylon which can be furnished in many heights.
Back mounting gages are used on tanks permitting access to the inside in order to fasten the nuts on the mounting studs, inserted in drilled holes in reservoirs. Front mounting gages are used on reservoirs which do NOT permit access to the inside, therefore, the tank must have two tapped holes, 1/2 - 20, to receive the mounting studs, which are fastened from the outside. Many special gages have been developed for customer′s specific applications.
® Viton is a registered trademark of Dupont Dow Corp.
Patent Number: 6,532,815 |
 | Level Gages Flush Broad Face Nylon
Level Gages Flush Broad Face Nylon are used for distant viewing of the level and clarity of the liquid. These tough, rugged gages are offered for flush mounting only, in heights up to 36 inches.
This gage is used on tanks, reservoirs, packaged hydraulic units, and in many other applications where it is necessary to check liquid levels for the protection of costly equipment.
The unit consists of an almost unbreakable plastic sight, compatible with most oils and holds a 11/2 inch wide column of liquid. It is held between top and bottom enclosures with two internal tie rods which compress the necessary seals. High and Low level marking are internally mounted across the tie rods.
A white reflector for increasing visibility of the liquid
column is held with two brackets. Hollow mounting bolts
provide large passages for liquid to enter the gage and to
vent displaced air back into the tank, effecting quick level
response.
Back mounting gages are used on tanks permitting access to the inside in order to fasten the nuts on the mounting studs, inserted in drilled holes in reservoirs. Front mounting gages are used on reservoirs which do NOT permit access to the inside, therefore, the tank must have two tapped holes, 1/2-20, to receive the mounting studs which are fastened from the outside. |
 | Drum gage with Faucet
Drum gage with Faucet determines level and condition of oils, solvents, chemicals, water and any other fluids stored in steel drums. Fits standard 55 gallon drums. Provides instant visual checks with extreme accuracy to aid in measurement and inventory control. Ideal for indoor or outdoor use.
Channel body is made of rigid steel, plated to resists rust. Clear gage glass is housed within channel providing maximum protection. Brass faucet resists rust and corrosion and automatically shuts off when release, thus preventing unwanted waste. A means in which the faucet can be locked is provided. |
 | Short Elbow Steel Gages
Short Elbow Steel Gages are made of tough, plated steel bodies which allow visual observation of liquid level and liquid clarity.
The glass sights are compatible with many chemicals, and they will retain their clarity through various temperature changes. The tough steel channel gage will protect against glass breakage.The gages are used on tanks, reservoirs, hydraulic equipment, presses, large motor bearings, pillow blocks, and in other applications where it is necessary to guard against a low liquid level. |
 | Long Elbow Steel Gages
Long Elbow Steel Gages are made of tough, plated steel bodies which allow visual observation of liquid level and liquid clarity.
The glass sights are compatible with many chemicals, and they will retain their clarity through various temperature changes. The tough steel channel gage will protect against glass breakage.The gages are used on tanks, reservoirs, hydraulic equipment, presses, large motor bearings, pillow blocks, and in other applications where it is necessary to guard against a low liquid level. |
 | Union Coupling Steel Gages
Union Coupling Steel Gages are made for applications requiring horizontal inlets and where clearance from obstructions do not permit rotating the gage for mounting. |
 | Straight Level Steel Gages
Straight Level Steel Gages are made for applications requiring vertical inlet and permit direct mounting for quick response of fluid level. These gages are made of tough, plated steel bodies which allow visual observation of liquid level and liquid clarity.The glass sights are compatible with many chemicals, and they will retain their clarity through various temperature changes. The tough steel channel gage will protect against glass breakage.
The gages are used on tanks, reservoirs, hydraulic equipment, presses, large motor bearings, pillow blocks, and in other applications where it is necessary to guard against a low liquid level. |
 | Short Elbow Brass Gages
Short Elbow Brass Gages are for applications requiring horizontal inlets with minimal clearance for mounting. |
 | Long Elbow Brass Gages
Long Elbow Brass Gages are for applications requiring horizontal inlets which need additional clearance. |
 | Union Coupling Brass Gages
Union Coupling Brass Gages are for applications requiring horizontal inlets. They are used in areas where clearance from obstructions do not permit rotating the gage for assembly. The brass level gages for visibly indicating liquid levels are rugged, machined from brass stock and have glass sights which are protected by revolvable shields. A protected vent hole in the cap reduces the possibility of dust, dirt or moisture getting inside the gage. |
 | Elbow Brass Gages with Female Inlet
Elbow Brass Gages with Female Inlet are primarily used for applications requiring horizontal inlets and where a normal pipe nipple is used to extend the gage from the application due to clearance of ounting bolts or other irregularities. |
 | Straight Brass Gages
Straight Brass Gages with shielded sight are for applications requiring vertical inlet and permit direct mounting for rapid transfer of fluid. The brass gages are rugged, machined from brass stock and the sight is protected by a revolvable shield. A protected vent hole in the cap reduces the possibility of dust, dirt or moisture getting inside the gage. |
 | Elbow Brass Gages with 1′′ Thermometer
Elbow Brass Gages with 1′′ Thermometer are made for applications requiring visual indication of both liquid level and liquid temperature. The brass level gages are rugged, machined from brass stock and have glass sights which are protected by revolvable shields. A protected vent hole in the cap reduces the possibility of dust, dirt or moisture getting inside the gages. Temperature is indicated in Fahrenheit and Celsius for the 2′′ thermometer and Fahrenheit for the 1′′ thermometer. The larger dial facilitates easy viewing from a distance. |
 | Elbow Brass Gages with 2′′ Thermometer
Elbow Brass Gages with 2′′ Thermometer are made for applications requiring visual indication of both liquid level and liquid temperature. The brass level gages are rugged, machined from brass stock and have glass sights which are protected by revolvable shields. A protected vent hole in the cap reduces the possibility of dust, dirt or moisture getting inside the gages. Temperature is indicated in Fahrenheit and Celsius for the 2′′ thermometer and Fahrenheit for the 1′′ thermometer. The larger dial facilitates easy viewing from a distance. |
|
Tell your suppliers you found them on ThomasNet