Presses: H-Frame Hydraulic related categories
 | H-Frame Presses
- Quality welded frame for maximum strength and long life
- Exclusive “Hydra-Lift” bed for effortless adjustment of the vertical daylight (10 ton models are manual)
- Roller head design is standard to allow movement and locking of the cylinder from side to side (10 ton, 25 ton and 30 ton are manual)
|
 | H Frame 25 Tons Press
Press bed height easily adjustable with winch′s bed will not drop when handle is released.Choice of power sources for rapid cylinder advance: two-speed hydraulic hand pump, electric/hydraulic or air/hydraulic.Pump Electrical Specifications
PE17 Series – 1/2 HP, 115 volt, 60 cycle, single phase.
PE21 Series – 1 hp, 115 volt, 60 cycle, single phase.
Both pumps available in 230 volt, 50 cycle |
 | H Frame 55 Ton Press
Movable work head for full off-center pressing at full rated capacity across width of upper frame without buckling or bending.Maximum “daylight” is 42′′ x 36′′, making positioning of even bulky work pieces easy.Height of press bed is easily adjusted with winch; friction brake prevents bed from dropping and handle from spinning upon release.55 ton cylinder has chrome plated piston rod and wiper seals to keep out corrosion and contamination in a shop environment.Presses with single-acting cylinder offer choice of 2-speed hand operated, electric/hydraulic, or air/hydraulic pump. Models with double-acting cylinder have an electric/hydraulic pump.Press model equipped with remote control enables operator to view work from all sides with fingertip control of cylinder piston travel.Press can be used horizontally for special applications with user supplied support legs.Pump Electrical Specifications
PE17 Series - 1/2 HP, 115 volt, 60 cycle, single phase. Also available in 230 volt, 50 cycle.
PE21 Series - 1 HP, 115 volt, 60 cycle, single phase. Also available in 230 volt, 50 cycle.
PQ60 Series - 2 HP, 230 volt, 60 cycle, single phase. Also available in 230 volt, 50 cycle. |
 | H Frame 100 Ton Press
Cylinder work head glides across upper frame on rollers, locks in place for off-center pressing jobs. Press may be used horizontally for special pressing applications with user supplied supports.Press bed is raised and lowered by winch which locks in place for insertion of bed retaining pins. Upper bolster can be lowered 8′′ for
convenient positioning on repetitive jobs.Generous “daylight” of 42′′ x 50′′ accommodates bulky work pieces, uprights are placed for easy side entry of bars or shafts for straightening or bending.Choice of single or double acting cylinder. Hydraulic pump options include: 2-speed hand pump with large 2 gallon reservoir, PE172 electric/ hydraulic pump or “PQ” series “Quiet” electric/hydraulic pump with low noise level.Pump Electrical Specifications
PE17 Series - 1/2 HP, 115 volt, 60 cycle, single phase. Also available in 230 volt, 50 cycle, add suffix “-220” to order no.
PQ60 Series - 2 HP, 230 volt, 60 cycle, single phase. Available in 115 volt, 60 cycle and 230 volt, 50 cycle.
PQ120 Series - 3 HP, 460 volt, 60 cycle, three phase. Available in 220/380 volt, 50 cycle.
|
 | H Frame 150 and 200 Ton Press
Standing 7 1/2 feet tall, these giants handle the really big jobs. May be used horizontally for special pressing applications with user-supplied supports.
Work head has wide horizontal travel; rugged press frame withstands load of rated capacity across full width of frame.
Winch mechanism provides easy positioning of press bed, locks in place for insertion of retaining pins. Upper bolster can be lowered 11′′ for convenient positioning on repetitive jobs.
Uprights are placed for easy side entry of bars or shafts for straightening or bending.
Fast cylinder approach is provided by PQ1204S “Quiet” electric/hydraulic pump. Has remote control hand switch, enabling operator to view work from all sides with fingertip control of cylinder piston travel.
Pump Electrical Specifications
PQ120 Series - 3 HP, 460 volt, 60 cycle, three phase.
Also available in 220/380 volt, 50 cycle |
|
Tell your suppliers you found them on ThomasNet