Thermal Wire and Cable′s FEP Teflon 300V Teflon insulated conductors produce very little smoke when burned and are chemically inert to nearly all industrial chemicals and solvents. As a primary insulation FEP couples superior dielectric properties, heat resistance and durability. Its flexible nature and small diameter profile provides for easy, economical installations. Fully pigmented insulation in bright colors aids in positive identification. Tin electro-plated copper strands are available as the standard conductor. Compared with other high temperature cables that are augmented with a braid, Thermal wire and cable FEP lead wires leave behind no fiberglass chards and contaminating residue.

Thermal Wire and Cable′s FEP Teflon 300V Teflon insulated lead wire slide rather tear, yet its abrasion resistance helps eliminate cut-through and other damage that can occur during installation and use.

Thermal Wire and Cable′s FEP Teflon 300V lead wires are 20% smaller in diameter than braided cables allowing more circuits per conduit.

Available in 30 AWG -10 AWG. 600 Volt also available (SDT 200 600V). Certain colors may require minimum orders. Larger sizes available please consult sales department. Teflon is a registered trademark of the Du Pont Corporation.

Conductor options : Standard conductor material is tin-plated copper #18 and larger. Solid or stranded Grade A (Nickel 200), Topcoat, Prebond, or other conductor options available.

SDT-200 Tefzel 750® lead wire produces very little smoke when burned, is chemically inert to nearly all industrial chemicals and solvents. As a primary insulation, Tefzel 750® couples superior dielectric properties, is abrasion resistant, heat resistant and its durability is second to none. Its flexible nature and small diameter profile provides for easy, economical installations. Fully pigmented insulation in bright colors aids in positive identification.

Compared with other high temperature cables that are augmented with a braid, Thermal Wire and Cable SDT-200 insulated lead wire will slide rather than tear, yet its abrasion resistance helps eliminate cut-through and other damage that can occur during installation and use. SDT-200 leaves behind no residual glass chards to contaminate the surrounding area.

Thermal Wire and Cable′s SDT-200 lead wires are 20% smaller in diameter than braided cables allowing more circuits per conduit.

Available in 36 AWG-4/O. Larger sizes available, please consult sales department. Teflon is a registered trademark of the Du pont Corporation. Nickel-Plated copper is standard 24-20 AWG

*Please specify color : 1-tan, 2-red, 3-orange, 4-yellow, 5-green, 6-blue, 7-purple, 8-gray, 9-white. Stripe color example : -100 tan base color with two black stripes.

Intended Use : Internal Wiring of Appliances. UL Recognized CSA Certified
Conductor options :Solid or stranded pure nickel.Nickel-Plated copper 24-20 AWG

** Ampicity based on single conductor in free air @ 40°C. Please concern Articlec 310 of National Electronic code for futher ampicity and application information.