Hinges: Garage Door related categories
 | Concession Hinges
Both leaves pierced with 0.203 inch diameter holes 2 inch centers, inline, 1/2 inch from edge.
|
 | Preformed Hinges
The preformed hinge is available in two leaf thicknesses and two pin diamteres, which are identified as Medium Duty and Heavy Duty. Each style is offered in steel, T304 stainless steel and T316 stainless steel.
Designed specifically to be used on the traditional ′′NEMA′′ style electrical enclosure. Both the formed and unformed leaves are configured to provide the proper spacing and location for the assembly of the door to the enclosure. The construction of the hinge incorporates .062 inch paint clearance and the pin is removable. |
 | Loose Joint Hinges
Hinge leaf material - Cold Rolled Steel.
Hinge pin material - Steel.
Loose joint hinges, variably referred to as slip, separable, or take-apart hinges, have always been catalogued as right or left hand hinges. Because applications may vary, this has caused errors in specification as to which is right or left hand. To simplify the selection of all loose joint hinges, we have identified each hinge by type . A mortise type hinge available.
Other gauges, widths, lengths, and pin materials can be made to order. |
| Pins for Continuous Hinges
Some Continuous Hinges are stocked with removable Pins. When necessary, these pins are available as separate item and can be purchased with different alloy pin to install in a particular hinge. |
 | Stanley Continuous Hinges, Nickel Plated
311 Hinges - Countersunk holes 2′′ center to center No. 4 flat head screws.
314 Hinges - Countersunk holes 2′′ center to center No. 8 flat head screws.
Plain unfinished Hinges available without holes: Prefix ′′NH′′ to Part Number. |
| Stanley Continuous Hinges, Plain Steel
311 Hinges - Countersunk holes 2′′ center to center No. 4 flat head screws.
314 Hinges - Countersunk holes 2′′ center to center No. 8 flat head screws.
Plain unfinished Hinges available without holes: Prefix ′′NH′′ to Part Number. |
| Stanley Continuous Hinges, Solid Aluminum
311 Hinges - Countersunk holes 2′′ center to center No. 4 flat head screws.
314 Hinges - Countersunk holes 2′′ center to center No. 8 flat head screws.
Plain unfinished Hinges available without holes: Prefix ′′NH′′ to Part Number. |
| Stanley Continuous Hinges, Solid Brass
311 Hinges - Countersunk holes 2′′ center to center No. 4 flat head screws.
314 Hinges - Countersunk holes 2′′ center to center No. 8 flat head screws.
Plain unfinished Hinges available without holes: Prefix ′′NH′′ to Part Number. |
| Stanley Continuous Hinges, Solid Stainless
311 Hinges - Countersunk holes 2′′ center to center No. 4 flat head screws.
314 Hinges - Countersunk holes 2′′ center to center No. 8 flat head screws.
Plain unfinished Hinges available without holes: Prefix ′′NH′′ to Part Number. |
| Stanley Continuous Hinges, Bright Brass
311 Hinges - Countersunk holes 2′′ center to center No. 4 flat head screws.
314 Hinges - Countersunk holes 2′′ center to center No. 8 flat head screws.
Plain unfinished Hinges available without holes: Prefix ′′NH′′ to Part Number. |
 | Stanley 600 Series Pinned Continuous Steel Hinges
Features:
640 Series cold rolled steel hinges are prime painted
650 series cold-rolled 304 stainless steel hinge is buffed to a satin lustre (BHMA 630, US 32D)
Fabricated from 14-gauge cold-rolled steel or 304 stainless steel to provide superior strength compared to aluminum.
Concealed Teflon-coated stainless steel pin and twin self-lubricating nylon bearings at each knuckle.
UL and ULC listed for fire-rated 4 inch x 8 inch single doors and 8 ft. x 8 ft. pairs of doors and frames up to three hours, allowing use in rated fire walls with no additional studs or hinge parts.
Cycle tested to 1.5 million.
Standard Lengths are 7 feet and 8 feet.
Available in lengths from 7 ft. to 10 ft. and easily cut for special applications.
600 lb. door carrying capacity provides support for all types of doors.
|
 | Stanley Aluminum Continuous Geared Hinge
- Anti Spinning Through Fastener
- Snap in Cover Fastening
- Bearing : Engineered Polymer with PTFE
- Life Span® hinge covered by a limited lifetime warranty
- Meets or Exceeds ANSI/BHMA A156.26-1996 Grade1
- UL 634 for CE and CS hinge options
- UL 10B for 3 hour fire rating
|
 | Standard Weight Half Mortise
- For medium weight or average frequency doors hung on channel iron frames.
- Equipped with two permanently lubricated non-detachable ball bearings and reversible pins and tips.
- Pins in nonferrous hinges are stainless steel.
- Steel hinges are polished and plated to insure a fine durable finish.
- A back plate is recommended for use with these hinges.
- Equipped with reversible pins and tips.
- Packed with machine screws and grommet nuts for 13/4′′ (44 mm) doors.
|
 | Heavy Weight Full Surface
- For heavy or high frequency doors with edge rails that won′t hold screws, hung on channel iron frames
- Equipped with four permanently lubricated non-detachable ball bearings and reversible tips and pins
- Heavy weight gauges increase available bearing surface area for maximum friction reduction
|
 | Standard Weight ′′Swing Clear′′ Hinge Reversible Pins and Tips
- Ideal for remodeling or new construction
- available for full mortise application on square edge doors
- Designed or replace existing 3 1/2′′ or 4′′ hinges for swing clear openings
- Designed to swing doors completely clear of the opening when door is opened 95 degrees
- Specify finish desired when ordering : grey prime coat, zinc, satin chromium, bright chromium, satin bronze
|
 | Standard Weight ′′Swing Clear′′ Ball Bearing Hinge
- Ideal for remodeling or new construction
- Specify FBB248 for Full mortise application on square edge doors
- Specify FBB258 for full mortise application on bevel edge doors
- Designed to swing doors completely clear of the opening when door is opened 95 °
- Specify finish desired when ordering: Grey Prime Coat, Zinc, Satin Chromium, Bright Chromium, Satin Bronze
|
 | 550 Chest Hinges
Tight Pin. Countersunk Holes.
Designed for chests, cabinets, storage boxes, etc. Hinges and screws are semi-concealed when hinge is closed. |
 | Heavy Weight Half Surface Hinges
FBB163 (ANSI A8411) Steel - polished and plated or phosphated and primed for painting.
For heavy or high frequency wood doors with edge rails that won′t hold screws, hung in hollow metal frames.
Equipped with four permanently lubricated non-detachable ball bearings.
Heavy weight gauges increase available bearing surface area for maximum friction reduction.
Equipped with sleeve bearings for lateral support and reversible pins and tips. |
 | Semi-Concealed Hinges
Designed as a semi-concealed, loose-pin hinge for 3/4′′ flush cabinet doors and shutters made of plywood. Used when end fastening would not be practical.
Removable pin allows hinge to be reversed for right- or left-hand applications.Both hinge leaves are concealed when the door is closed. |
 | Cabinet Hinges
- With removable pins
- The 1 1/2′′ (38.1 mm) size is three knuckle, the rest are five knuckle hinges
- For doors of cabinets, bookcases, china closets, etc.
- For full mortise type application
|
 | Non-Mortise Hinges
- Steel construction for added strength
- Easy installation - No mortising required
- Attractive bright brass finish
- 3′′ furnished with #6 x 3/4′′ screws
- 3 1/2′′ and 4′′ furnished with #8 x 1′′ screws
|
 | Cabinet Spring Hinge
- Steel, plated, highly rust resistant
- Use for flush surface application
- Spring action for self-closing doors
- For use on cabinet doors, utility closet doors, office gates.
|
 | Adjustable Tension Screen Door Spring Hinges
For use to provide a strong closing action on light to medium weight wood screen doors2152 for use in half surface applications - use 2154 in full surface installationsSpring tension is fully adjustable Non-removable fast spun pin designCan be used in either right hand or left hand applicationsHinges supplied complete with adjusting rod and stop pinsYou must specify desired finish when ordering.Designs and Specifications are for reference only and are subject to change without notice. |
 | Heavy Weight Ball Bearing
- For heavy doors or doors where high frequency is expected, such as entrance doors to office buildings, stores, public buildings and corridor entrance doors to offices
- All hinges have template screw hole location for use on either wood or hollow metal doors and frames
- Equipped with four permanently lubricated non-detachable ball bearings
- Equipped with easily seated, non-rising pins
- Pins in nonferrous hinges are stainless steel
- Steel hinges are highly polished and buffed, then plated to insure a fine durable finish or phosphated and prime coated for painting
- Heavy weight gauges increase available bearing surface area for maximum friction reduction
- Equipped with sleeve bearing for lateral support
|
 | Solid Brass Broad Hinge
- Finely finished solid brass fast spun pin hinge for use on small boxes, chests and cabinets
- Wide leaves for broad width applications
- Lacquered to resist tarnishing
|
 | Broad Hinges - Zinc Plated
- For general utility work not recommended for use on regular weight doors
- Furnished on order, at additkinal cost, without holes; swaged or not swaged for metal work
- Made of wrought steel; all sizes have five knuckles
|
 | Extra Heavy Full Surface Hinges
- For window grilles, steel shutters, iron gates or for general utility heavy duty requirements
- Made of extra heavy wrought steel, not swaged, for surface application, with fast spun pins
- Furnished on order, at additional cost, swaged for full mortise application, with screw holes
- Hinges as regularly furnished (not swaged) measure slightly less in width - approximately 1/8′′
- All sizes have five knuckles
|
 | Diecast Block Hinges
Block hinges are a neat, convenient method for hanging doors on metal cabinets, electrical enclosures, etc. Non-handed, the upper part simply lifts onto a fixed steel pin.
Four sizes are available, and they are supplied in chromium-plated, black, or raw metal finish (suitable for painting after assembly). |
 | Loose Joint Broad Hinges
The pin in one hinge of each pair is longer than the other one making it easier to hang or lift off doors. |
 | Lift-off Concealed-Fix Diecast Hinges
Lift-off hinges providing improved appearance and greater security by use of concealed fixing studs. secured from inside. These are robust hinges intended for large enclosure doors, interior or exterior use. Left-hand and right-hand.
Doors lift-off fixed pin in bottom half of hinge. Use LH and RH together (opposed) when door is required to be permanently fixed.
Fixing by two threaded studs M8 x 12 mm, cast-in each leaf.
Black powder-coated finish.
Zinc alloy diecast, with 8 mm stainless steel pin. |
 | Moulded Lift-Off Hinges
Made of Acetal Nylon With 303 Stainless Steel Pin For All Types of Panels And Enclosures
Totally corrosion-resistant for indoor/outdoor use.
Competitively priced.
Self-lubricating, will not bind-up or seize.
Attractive modern design with matt textured finish,
More ductile and less brittle than diecastings.
Self-color, will not scratch or peel.
Good load-carrying properties |
|
Tell your suppliers you found them on ThomasNet
