Anchors related categories
 | LIEBIG Safety Bolt - Type LSN (Nut and Stud)
- The two-coned Safety Bolt guarantees cylindrical expansion and optical installation control via a domed washer.
- Approved for use in the bending/tension, and compression zone.
- Suited for drill-through and drop-in method.
- All anchor bolts are made of HIGH tensile steel - quality A 325 (ASTM). Minimum tensile strength: 116,000 psi.
|
 | Thunder® Stud
- Listed by Underwriters Laboratories (UL), International Conference of Building Officials (ICBO), and Board of Standards and Appeals (BSA).
- Meets or exceeds U.S. Government G.S.A. Specifications: FF-S-325 Group 11, Type 4, Class 1.
- Grades 304, 316 Stainless available upon request.
- Special lengths available upon request.
- For technical information, please call or request a factory catalog.
|
 | Wej-it Anchor Bolts
- Time-tested, proven reliability.
- Bolt size = Hole size.
- Works first time, every time.
- Exclusive ′′Positive Wedge Connection′′.
- Fully assembled and ready to use.
Length Selection Guide
Minimum embedment (A)
+ Material Thickness +(B)
+ 1 1/2 x Bolt Diameter +(C)
= Total length =(D). - For technical information, Please call or request a factory catalog.
|
 | Sleeve Type Anchors
- All steel construction for long lasting performance.
- Use in concrete, block, brick, or stone.
- Pre-assembled anchor is ready to use.
- Removable after use.
- Hex nut, acorn nut, stud bolt, and flat head available.
- No hole spotting.
- No special installation tools required.
- GSA: FF-S-325, Group 2, Type 3, Class 3 .
|
 | Screw Anchors
- Use in concrete, brick, or stone.
- Setting Tool provided free in each box of anchors.
- Fits into irregular holes.
- Available in open bottom only.
- Sleeve expands into irregularities of hole.
- 3/8 - 7/8 inch U.L. Listed Pipe Hangers.
- GSA: FF-S-325, Group 2, Type 2, Class 1.
|
 | Drop-In Anchors
- Used in medium- to heavy-duty applications.
- Used in solid media such as concrete and stone.
- Setting tool provided with each 100 anchors.
- Used in overhead applications.
- Applications include hanging pipe, duct work, machinery, etc.
- Drop-ins are available in 304 stainless steel on special order. Important Note : Due to the exacting nature of the Drop-in′s expansion requirements, the appropriate setting tool must be used for each size and type. Failure to use the correct tool could result in a fastening failure.
- GSA: Spec FF-S-325, Group VIII, Type 1.
- DOT Approvals on file. Utility Approvals on file.
|
 | Lag Screw Expansion Shield
- Use in concrete, mortar, or stone.
- Rustproof.
- Heavy external corrugations assure powerful gripping action.
- GSA: FF-S-325, Group 2, Type 1, Class 1 and 2.
|
 | Loxin Expansion Shield
- Use in concrete, brick or stone.
- Shield expands as bolt is tightened.
- GSA: FF-S-325, Group 2, Type 2, Class 2, Style 1.
|
 | Selfdrill Shield
- All steel construction for long lasting performances.
- Installed manually or by power hammer.
- With appropriate chuck, drills own hole in concrete, brick or stone.
- Heavy duty.
- Vertical slots for uniform expansion.
- Reduces drilling time and labor.
- GSA: FF-S-325, Group 3, Type 1, Approved I.C.B.O.
|
 | P.D. Concrete Inserts
- For preplanned concrete fastening.
- Rustproof.
- Use with steel or wooden forms
Steel Forms
Star P.D. Concrete Insert can be secured directly to steel form with a standard machine screw or bolt. Machine screw or bolt is easily removed when form is stripped.
Wood Forms
Star P.D. Concrete Insert can be easily secured to wood form with one stronghold nail. P.D. Adapter Plug is easily removed after form is stripped. |
 | Conical Plastic Anchors
- For hollow or solid wall, ceiling or floor applications.
- Unique Star formula makes our Plastic Anchor superior in extreme hot or cold environments.
- Quick and easy to use.
- Inexpensive installation.
|
 | Hammer Drive Anchors
- Use in concrete, block, brick or stone.
- No hole spotting.
- Fast and easy to use.
- One piece, pre-assembled construction.
|
 | Hollow Wall Anchors
- Greater holding power than nails or screws in hollow walls.
- Use in wallboard and paneling.
- Nut has more threads than similar anchors of other brands, for superior holding power.
- Securely fasten mirrors, pictures, etc.
- Fixtures can be removed or replaced without disturbing the anchor.
- Available with Hex Washer Slotted Screws for power driven installations.
- GSA: FF-B-588-C, Type III.
|
 | Drive Hollow Wall Anchors
- Use in wallboard, plaster and paneling.
- No pre-drilling required.
- Drives into walls in seconds.
- Saves labor.
- Securely fasten mirrors, pictures, etc.
|
 | Self-Drilling Hollow Wall Anchor (Buildex EZ Ancor)
Scru ′N′ Grip is injection molded of engineered plastic or long lasting Zamak. Its unique, slim design allows the fastener to make a small hole that does not disrupt the consistency of the drywall. The anchor has a tri-cutting drill point that drills a clean hole and prevents paper damage. The deep cutting threads provide strong engagement and resist stripping out. The tapered, oversized head seals the hole with a flush mount. Type Scru ′N′ Grip™ Plastic No. 8. |
 | Plastic Toggle Screw Anchors
- Fast and easy to use.
- Use screw sizes from No 8 to No 12.
- Always works regardless of wall thickness or material.
- Requires one drill size - 5/16 inch.
Size Range :
Hollow walls of 3/8, 1/2, 5/8 inch thicknesses.
All solid walls.
All shallow walls. |
 | Nylon Anchors (Tap - Its)
- No hole spotting.
- Quick, easy and economical to use.
- Excellent thermal and insulating qualities.
- Resistant to chemicals and fungus.
- Can be used in hollow or solid applications.
- Available in flat and truss heads.
|
|
Tell your suppliers you found them on ThomasNet