Mobil Vacmul 2105 Vacmul A6 was developed for machining higher tensile ferrous and non-ferrous alloys under heavy duty conditions in turning, tapping, screw cutting and gear cutting operations, particularly where heavy feed rates at slower cutting speeds are applied, and it is recommended for the flute grinding of twist drills.
Vacmul A6 is also suitable as a dual and triple purpose oil. In addition to serving as a cutting fluid, it may be used for the hydraulic system and/or the lubrication system of the machine tool where leakage and contamination of the cutting fluid and lubricant can occur.
Vacmul 2105 is primarily recommended as a drill flute grinding oil and for all arduous form grinding operations. In these operations high temperatures are generated at the work-piece/wheel cutting surfaces. Vacmul 2105 prevents overheating, distortion and dimensional inaccuracies when grinding at fast rates. Superior surface finish is obtained.
Vacmul 2105 can be used as a general purpose cutting oil on automatics, gear cutting and all operations where a non-corrosive oil is required for machining ferrous and non-ferrous metals.
Mobilmet 700 Series Mobilmet 760 Series are extra high performance oil based cutting oils. They are chlorine-free and are intended for severe cutting operations especially on difficult to machine steels. They are corrosive to copper and its alloys. In comparison with other leading premium cutting oils, Mobilmet 760 Series oils have demonstrated superior surface finish, extended tool life and control of built-up edge. Their light colour enables the work area to be seen at all times. Closer tolerances are consistently achieved. The oils are formulated to prevent the formation of oil mist in the vicinity of the machine tool, thus contributing to a safer and more pleasant working environment.
With the benefit of comprehensive development testing using modern machining equipment, plus extensive customer evaluations, Mobilmet 760 Series products, have become the products of choice for many machine shops.
Tell your suppliers you found them on ThomasNet
