Exceeds SAE 100R4 Construction: AQP Elastomer tube, reinforcement consisting of helical wire between two textile braids and blue AQP elastomer cover. Application: Suction and transfer applications for petroleum and phosphate ester hydraulic fluids, fuel, lubricating oils, gasoline, water and many other industrial fluids.  Due to its flexibility, light weight construction and almost universal fluid compatibility permits extensive use in chemical plants and tank truck applications.

Exceeds SAE 100R6 Construction: AQP elastomer tube, textile braid reinforcement, AQP elastomer cover. Application: Low pressure return lines in hydraulic systems.

Aeroquip FC498 AQP hose is specifically designed for low pressure valve and cylinder return line applications.  The superior performance of the AQP elastomer permits continuous operating temperatures to 302ºF and greatly exceeds the intermittent temperature capabilities of other SAE 100R6 hose.

The AQP elastomer tube in FC498 hose withstands long exposure to an extensive array of industrial fluids and is compatible with water, air, gasoline, fuel, petroleum-based and fire resistant hydraulic fluids and lubricating oils.  FC498 hose resists temperature extremes (-40ºF to +302ºF), oxidation, ozone and the effects of shelf aging.

Construction: AQP elastomer tube, textile braid reinforcement, AQP elastomer cover. Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and is not approved for air brake applications.

Fire resistant Hose Meets USCG AI Requirements.

FC234 AQP hose offers positive fire resistance in critical applications, including marine diesel and gasoline fuel systems.  FC234 hose offers flame-resistant performance without using firesleeve-covered hose.

Construction: AQP elastomer tube, brass plated steel wire reinforcement, braided refractory insulation and blue AQP elastomer cover. Application: Diesel fuel, gasoline, hot lube oil and water.

FC234 Crimp Fittings

FC355 Crimp Fittings

Available in sizes 1′′ through 6′′. Standard 50′ sections. Operating temperature range is -40 degrees F to 180 degrees F.
• Jacket is 100% woven polyester
• Lining is single ply extruded synthetic rubber

Applications include:
• Open ended discharge, wash down
• Not suitable for fire protection
• Contractor Hose

Please consult customer service for specific requirements.

3/4′′ ID SAFETY YELLOW 300 PSI hose X 50′ Long pre-assembled with Chicago style couplers on each end. Call customer service today at 800-876-5340 for a price.

Constructed of virgin grade fluoropolymer with a series 300 stainless steel wire braid reinforcement. Also available with a silicone or rubber jacket and configured as a Flare-Through hose assembly.

Made of virgin grade FEP fluoropolymer, APFRC is overbraided with a tightly-woven fabric and double spiral steel wire to dramatically enhance its pressure-carrying capability. Its extremely smooth core offers excellent chemical resistance and is made with ingredients that meet USP Class VI standards. An outer jacket of EPDM rubber provides enhanced durability and seals the hose against dirt, chemicals, or other external damage.

APFRC is now also available in a more flexible version. APFRC-W-FLX offers the same physical properties as the original version, however, a noticeable difference is seen in larger I.D. sizes in tight-fitting applications where added flexibility is required.

Lightweight flexibility, durable cleanliness, and crush resistance are what AdvantaPure APBWF Food Hose is all about. The butyl rubber core offers excellent purity that is suitable for all types of food applications including potable water, alcoholic liquids (under 92% concentration), beer, non-alcoholic beverages, juices, oily and fatty foods, milk, and dairy products.

APBWF Food Hose complies with FDA standards for use with food contact surfaces and meets all requirements for 3A.

Fluropolymer FEP, PTFE and Rubber Covered FEP hoses can be assembled and certified in a variety of configurations. Some of these include; Male Pipe X Male Pipe, Male Pipe X Female JIC, Female JIC X Female JIC, Flange X Flange, Cam & Groove X Cam and Groove and Sanitary X Sanitary. Not all fitting combinations are available with every hose, please consult Customer Service toll free 1-800-876-5340 to discuss your particular application requirements.

Dunham Rubber is proud to be a NAHAD listed member for Hydraulic Hose, Industrial Hose and Fluoropolymer Hose assemblies.  This means that Dunham Rubber fabricates our Hydraulic hose assemblies, Industrial hose assemblies and our Fluoropolymer hose assemblies in accordance to generally accepted best practice guidelines in the hose industry. 

The value to the customer is the peace of mind knowing that hose assemblies from Dunham Rubber are fabricated to meet a high quality standard for hydraulic, industrial and fluoropolymer assembly guidelines.  NAHAD hose assembly guidelines (HAG) are the standard for hose fabrication in the industry and Dunham Rubber is excited to be a listed member.  Call today toll free 1-800-876-5340 or e-mail us at mail@dunhamrubber.com to discuss your hose fabrication requirements.

Available in sizes 1-1/2′′ through 12′′ ID in standard 20′ lengths. Highly flexible and permits full airflow, even w/ 90 degree bends. Wire-reinforced polypropylene construction allows hose to maintain its shape. Joining two pieces of Extendo-Duct is easy. Just twist the end of one hose into the end of another. No fittings, menders, or couplings needed. Inert polypropylene material produces no off-gassing and is resistant to a wide variety of chemical fumes, making Extendo-Duct ideal for clean room and chemical fume exhaust applications. Extendo-Duct is suitable for use in temperatures ranging from -4 degrees F to 175 degrees F. Applications Include: Ducting for air-conditioning, spot cooling and heating systems. Room air exhaust conveying and ventilation. Dust collection. Fume Removal. OEM equipment applications.

Aeroquip FC849 4000 PSI Constant Pressure hose is tested to over 500,000 impulse cycles! Available in sizes -4 through -12, Available in BRUISER™ Cover (FC849B), 4000 PSI in all sizes, 1/2 SAE Bend Radius, 100R12 Spiral Performance, TTC Fittings available.

Application: Industrial and hydraulic system applications with petroleum and water-based fluids.  Recommended for use on construction, forestry, and other off-highway vehicles.

Construction: Synthetic rubber tube with two layers of wire braid reinforcement and abrasion resistant synthetic rubber cover.

Opperating Temperature Range: -40ºF to +212ºF
 

4000 PSI maximum operating pressure in all sizes.  When tested under demanding impulse conditions at 302ºF, FC324 AQP spiral hose lasted twice as long as the leading SAE100R12 spiral hose.

 Construction: AQP elastomer tube, 4 spiral wire reinforcement and a blue AQP elastomer cover.

Application: Hydraulic system service with petroleum, fire-resistant, and water-base fluids, fuel, and lubricating systems.

Operating Temperature Range: -40ºF to +300ºF