Tapes: Industrial related categories
 | Pipe Wrap/Surface Protection Tape, PWT-10H-333 yards
Heavy-duty SPVC pipe wrap/surface protection tapes are highly resistant to sun, water, oil, acids, alkalies and corrosive chemicals. Bacteria and fungus resistant. Abrasion resistant. Provides electrical protection. Protects pipe joints, conduit couplings for overhead or direct buried applications. Application temperature: 32°F. Water absorption rate (maximum): 0.290 (25°C, 24 hours). White SPVC pipe wrap. 10 mil. 1.5 inch (38.1mm) neutral core for HVAC industry |
| Film Tape, LDPE-5R-36 yards
Low density polyethylene film tape. 5.5 mil. Synthetic rubber based adhesive. Its tough polyethylene backing offers good abrasion and tear resistance. Low tack adhesive for surface protection applications. Clean removal off most surfaces. Should be tested before ordering. 3 inch neutral core. Static shear at 23°C (3 Kg. weight) >40 hours to SST. Polyethylene splicing; patching/repairing poly sheeting in boating and RV industry; electroplate masking; surface protection; color coding; wire identification; packaging; etc. |
| Filament Reinforced Strapping Tapes, FIL-890-60 yards
Uni-directional filament 6.0 mil. Fiberglass reinforced polypropylene. 190# Tensile. Clear synthetic rubber based adhesive. Adhesion: 93 oz/inch. Elongation: 5%. Industrial grade filament tape for strapping, bundling and palletizing. 3 inch neutral core. Jumbos available. |
| Filament Reinforced Strapping Tapes, FIL-835 B/D-60 yards
Bi-directional filament. 5.1 mil. Fiberglass reinforced polypropylene. 220# Tensile in both directions. Clear synthetic rubber adhesive. Adhesion: 74 oz/inch. Elongation: 6%. High strength, bi-directional filament tape for extremely demanding strapping, bundling and palletizing applications. High tear resistance makes it ideal for tabbing/seaming in metal fabricating industry. 3 inch neutral core. Jumbos available. |
| Polyester Splicing & Printed Circuit Board Tape, MYP-3US-72 yards
Color: Dk. Blue, Lt. green or white 3 mil total - 1 mil Polyester film with 2 mils of a Silicone Adhesive system. Resists fumes and chemicals, and leaves minimum residue on removal. Allows visibility of circuitry after masking. Film will not break or split during application or removal. A protective tape, designed to perform well in all phases of masking operations during printed circuit board production. Industry standard plater′s tape. Protects surfaces from splashes and chemical fumes in tin/lead stripping and gold tab plating. Adhesion: 25 oz/inch. Tensile strength: 23 Ibs/in. Elongation: 100%. Temperature range: -50° to +350°F. 3 inch plastic core. |
| Aluminum Foil Tapes, AF-20SW-60 yards
2 mil self wound dead soft malleable Aluminum Foil coated with acrylic adhesive. Malleable foil conforms well to irregular surfaces. Excellent harness wrap tape. Designed for non-critical applications such as sealing out dust and moisture, masking and duct sealing. Can be used for heat reflection in the appliance industry and as a mask for electroplating. This linerless product saves time and labor in stripping of release liner and produces less waste. Total thick ness: 3.25 mils. Adhesion to steel: 40 oz/in. Tensile: 24 Ibs/in. Elongation: 5%. Temperature range: -30°F to 325°F. 3 inch neutral core. |
| Aluminum Foil Tapes, AF-50SW-60 yards
5 mil heavy duty self wound dead soft aluminum foil coated with an aggressive acrylic adhesive system designed to stick firmly to its own backing. Malleable foil conforms well to irregualr and curved surfaces. Excellent performance at both low and high temperatures. Can be applied at low temperatures. Product offers a thicker gauge foil and is excellent for heat reflection and for use in the appliance industry. Total thickness: 7.0 mil. Adhesion to steel: 55 oz/in. Tensile: 50 lbs/in. Elongation: 10%. Temperature range: -30°F to +325°F. 3 inch core. |
 | Copper Foil Tapes, CFL-5A-36 yards
1 oz rolled copper foil (1.4 mil.) Provides excellent solderability and conformity. Its aggressive acrylic adhesive system creates a superior bond. 60# release liner. Used for REI/EMI shielding applications in the electrical/electronics industry. Annealed and non/tarnishing. Flammability File #130121, UL 510, Section 4. Applications: EMI/RFI shielding of small electromagnetic components (i.e Transformer/reactor coils) and cable splices; repairing, modifying & prototype designing of wining boards, supplementary shielding of joints/seams; flat conductor assemblies. |
| Double Coated Ultra High Bond Acrylic Tapes, DC-UHB45-36 yards
This structural grade tape is comprised of an integral core of solid polymer, coated on both sides with a uniform high-tack acrylic adhesive, carried on a 7 mil. white polyethylene release liner. Provides a superior, permanent bond between a wide variety of substrates, including glass, some plastics, composites, sealed wood, metals and painted metals. Withstands a wide range of weathering and temperature conditions without losing adhesion. Solid acrylic core gives tape superior strength: it can be easily applied and cleanly cut, yet is flexible, moldable, compressible & conformable to intricate shapes. Tape will bond to most surfaces, but thorough evaluation is recommended when bonding low energy surface material such as as PVC, ABS, PE, PP. Not recommended for bonding Teflon®, Tedlar“, Silicone or EPDM. 3 inch Plastic Core- Solid core (superior strength, easily applied & cut)
- Flexible, moldable, compressible & conformable
- Maintains adhesion at sub-zero temperatures
- Non-standing, will not harden/become brittle with age
- Isolates and dampens vibration and shock
- DC-UHB45 approved for certain GM, Ford and Chrysler specifications
|
| Double Coated Ultra High Bond Acrylic Tapes, DC-UHB60-36 yards
This structural grade tape is comprised of an integral core of solid polymer, coated on both sides with a uniform high-tack acrylic adhesive, carried on a 7 mil. white polyethylene release liner. Provides a superior, permanent bond between a wide variety of substrates, including glass, some plastics, composites, sealed wood, metals and painted metals. Withstands a wide range of weathering and temperature conditions without losing adhesion. Solid acrylic core gives tape superior strength: it can be easily applied and cleanly cut, yet is flexible, moldable, compressible & conformable to intricate shapes. Tape will bond to most surfaces, but thorough evaluation is recommended when bonding low energy surface material such as as PVC, ABS, PE, PP. Not recommended for bonding Teflon®, Tedlar“, Silicone or EPDM. 3 inch Plastic Core- Solid core (superior strength, easily applied & cut)
- Flexible, moldable, compressible & conformable
- Maintains adhesion at sub-zero temperatures
- Non-standing, will not harden/become brittle with age
- Isolates and dampens vibration and shock
- DC-UHB45 approved for certain GM, Ford and Chrysler specifications
|
| Double Coated Ultra High Bond Acrylic Tapes, DC-UHB80-36 yards
This structural grade tape is comprised of an integral core of solid polymer, coated on both sides with a uniform high-tack acrylic adhesive, carried on a 7 mil. white polyethylene release liner. Provides a superior, permanent bond between a wide variety of substrates, including glass, some plastics, composites, sealed wood, metals and painted metals. Withstands a wide range of weathering and temperature conditions without losing adhesion. Solid acrylic core gives tape superior strength: it can be easily applied and cleanly cut, yet is flexible, moldable, compressible & conformable to intricate shapes. Tape will bond to most surfaces, but thorough evaluation is recommended when bonding low energy surface material such as as PVC, ABS, PE, PP. Not recommended for bonding Teflon®, Tedlar“, Silicone or EPDM. 3 inch Plastic Core- Solid core (superior strength, easily applied & cut)
- Flexible, moldable, compressible & conformable
- Maintains adhesion at sub-zero temperatures
- Non-standing, will not harden/become brittle with age
- Isolates and dampens vibration and shock
- DC-UHB45 approved for certain GM, Ford and Chrysler specifications
|
| Cloth Duct Tapes, CDT-80F-60 yards
Contractors grade duct tape 12 mil. 80 mesh. High tensile Polyethylene-coated cloth with a natural rubber resin adhesive. It is a superior performance duct tape specifically designed for the high demand of contractor applications. Product has excellent shear values to surface and backing. It has good conformability and excellent resistance to tear. Used in HVAC industry to provide an excellent seal for thermal insulation and air conditioning ducts, used as a moisture barrier for both indoor and outdoor applications. Also used in asbestos abatement applications; as a quality waterproof pack aging tape for export shipments; for splicing, vinyl repair, protecting, and bundling. Adhesion to steel: 55 oz/in. Tensile strength: 26.4 Ibs/in. Elongation at break: 15%. Temperature range: 32°F to 150°F. 3 inch neutral core/carton. Colors: Fluorescent Green, Orange, Pink, Yellow. |
| Double Coated PVC Tapes, DC-4414W-36 yards, white
White PVC tape. 5.5 mil exclusive of liner, 1.5 mil white PVC film coated on both sides with a solvent based acrylic adhesive. Gold siliconized paper liner. The adhesive system of this double coated tape is extremely aggressive, and will bond well to nearly all materials: even to difficult surfaces like foams, PE and PP films. It has excellent temperature, UV, aging, and water vapor resistance. Used for secure attachment of extruded plastic profiles in furniture and general industries. Used extensively for mounting of signs and large format graphics. Recommended for bonding trims in automotive and other industries. Adhesion (1 minute dwell): 80 oz/in. Temperature resistance: -40F up to 158F. 3′′ neutral core/carton. |
|
Tell your suppliers you found them on ThomasNet
