Metals: Corrosion Resistant related categories
 | Aluminum Sheet and Coil - Series 1100-0
1100 grade is commercially pure aluminum. It is soft and ductile and has excellent workability. It is ideal for applications involving intricate forming because it work hardens more slowly than other alloys. It is the most wieldable of aluminum alloys, by any method. It is non heat-treatable. It has excellent resistance to corrosion and is widely used in the chemical and food processing industries. It responds well to decorative finishes which make it suitable for giftware.
1100-0
Mill Finish
Paper Interleaved
AMS-QQ-A-250/1 AMS4001 ASTM B209 |
| Aluminum Sheet and Coil - Series 1100-H14
1100 grade is commercially pure aluminum. It is soft and ductile and has excellent workability. It is ideal for applications involving intricate forming because it work hardens more slowly than other alloys. It is the most wieldable of aluminum alloys, by any method. It is non heat-treatable. It has excellent resistance to corrosion and is widely used in the chemical and food processing industries. It responds well to decorative finishes which make it suitable for giftware.
1100-H14
Mill Finish
AMS-QQ-A-250/1 AMS4003 ASTM B209 |
| Aluminum Sheet - Series 1100-H25
1100 grade is commercially pure aluminum. It is soft and ductile and has excellent workability. It is ideal for applications involving intricate forming because it work hardens more slowly than other alloys. It is the most wieldable of aluminum alloys, by any method. It is non heat-treatable. It has excellent resistance to corrosion and is widely used in the chemical and food processing industries. It responds well to decorative finishes which make it suitable for giftware.
One Side Bright
1100-H25
Paper Interleaved |
| Aluminum Sheet - Series 2024-T3 Alclad
2024 is one of the best known of the high strength aluminum alloys. With its high strength and excellent fatigue resistance, it is used to advantage on structures and parts where good strength-to-weight ratio is desired. It is readily machined to a high finish. It is readily formed in the annealed condition and may be subsequently heat treated. Arc or gas welding is generally not recommended, although this alloy may be spot, seam or flash welded. Since corrosion resistance is relatively low, 2024 is commonly used with an anodized finish or in clad form (′′Alclad′′) with a thin surface layer of high purity aluminum. Applications: aircraft structural components, aircraft fittings, hardware, truck wheels and parts for the transportation industry.
Alclad sheet must be masked before shearing to protect surface finish.
2024-T3 AlClad
Interleaved and Stenciled
AMS-QQ-A-250/5 AMS 4041 |
| Aluminum Sheet - Series 2024-T3 Bare
2024 is one of the best known of the high strength aluminum alloys. With its high strength and excellent fatigue resistance, it is used to advantage on structures and parts where good strength-to-weight ratio is desired. It is readily machined to a high finish. It is readily formed in the annealed condition and may be subsequently heat treated. Arc or gas welding is generally not recommended, although this alloy may be spot, seam or flash welded. Since corrosion resistance is relatively low, 2024 is commonly used with an anodized finish or in clad form (′′Alclad′′) with a thin surface layer of high purity aluminum. Applications: aircraft structural components, aircraft fittings, hardware, truck wheels and parts for the transportation industry.
2024-T3 Bare
Interleaved and Stenciled
AMS-QQ-A-250/4 AMS 4037 |
| Aluminum Sheet - Series 2024-0 Bare
2024 is one of the best known of the high strength aluminum alloys. With its high strength and excellent fatigue resistance, it is used to advantage on structures and parts where good strength-to-weight ratio is desired. It is readily machined to a high finish. It is readily formed in the annealed condition and may be subsequently heat treated. Arc or gas welding is generally not recommended, although this alloy may be spot, seam or flash welded. Since corrosion resistance is relatively low, 2024 is commonly used with an anodized finish or in clad form (′′Alclad′′) with a thin surface layer of high purity aluminum. Applications: aircraft structural components, aircraft fittings, hardware, truck wheels and parts for the transportation industry.
2024-0 Bare
Heat Treatable Interleaved and Stenciled
AMS-QQ-A-250/4 AMS 4035 |
| Aluminum Sheet - Series 2024-0 Alclad
2024 is one of the best known of the high strength aluminum alloys. With its high strength and excellent fatigue resistance, it is used to advantage on structures and parts where good strength-to-weight ratio is desired. It is readily machined to a high finish. It is readily formed in the annealed condition and may be subsequently heat treated. Arc or gas welding is generally not recommended, although this alloy may be spot, seam or flash welded. Since corrosion resistance is relatively low, 2024 is commonly used with an anodized finish or in clad form (′′Alclad′′) with a thin surface layer of high purity aluminum. Applications: aircraft structural components, aircraft fittings, hardware, truck wheels and parts for the transportation industry.
Alclad sheet must be masked before shearing to protect surface finish.
2024-0 Alclad
Heat Treatable Interleaved and Stenciled
AMS-QQ-A-250/5 AMS 4040 |
| Aluminum Sheet and Coil - Series 3003-0
3003 is the most widely used of all aluminum alloys. It is essentially commercially pure aluminum with the addition of manganese which increases the strength some 20% over the 1100 grade. Thus, it has all the excellent characteristics of 1100 with higher strength. It has excellent corrosion resistance. It has excellent workability and it may be deep drawn or spun, welded or brazed. It is non heat treatable. Applications: cooking utensils, decorative trim, awnings, siding, storage tanks, chemical equipment.
3003-0
Mill Finish
Paper Interleaved
AMS-QQ-A-250/2 AMS4006 ASTM B209 |
| Aluminum Sheet and Coil - Series 3003-H14
3003 is the most widely used of all aluminum alloys. It is essentially commercially pure aluminum with the addition of manganese which increases the strength some 20% over the 1100 grade. Thus, it has all the excellent characteristics of 1100 with higher strength. It has excellent corrosion resistance. It has excellent workability and it may be deep drawn or spun, welded or brazed. It is non heat treatable. Applications: cooking utensils, decorative trim, awnings, siding, storage tanks, chemical equipment.
3003-H14
Mill Finish
AMS-QQ-A-250/2 AMS 4008 ASTM B209 |
| Stucco Embossed Sheet and Coil
3003 is the most widely used of all aluminum alloys. It is essentially commercially pure aluminum with the addition of manganese which increases the strength some 20% over the 1100 grade. Thus, it has all the excellent characteristics of 1100 with higher strength. It has excellent corrosion resistance. It has excellent workability and it may be deep drawn or spun, welded or brazed. It is non heat treatable. Applications: cooking utensils, decorative trim, awnings, siding, storage tanks, chemical equipment.
3003-H114
Mill Finish
2-Side Embossed |
| Anodized Aluminum Sheet and Coil
5005 alloy is generally considered to be an improved version of 3003. It has the same general mechanical properties as 3003 but appears to stand up better in actual service. It is readily workable. It can be deep drawn or spun, welded or brazed. It has excellent corrosion resistance. It is non heat-treatable. It is well suited for anodizing and has less tendency to streak or discolor. Applications: cooking utensils, decorative trim, awnings, siding, storage tanks, chemical equipment.
5005-H34
Satin Clear Finish
Paper Interleaved Sheet
Coating Thickness 201R1
201R1 is Exterior Standard No. 1/201 = 0.0002 minimum coating thickness/R1 = Medium Matte |
| Aluminum Sheet and Coil - Series 5052-0
5052 is the highest strength alloy of the more common non heat-treatable grades. Fatigue strength is higher than most aluminum alloys. In addition, this grade has particularly good resistance to marine atmosphere and salt water corrosion. It has excellent workability. It may be drawn or formed into intricate shapes and its slightly greater strength in the annealed condition minimizes tearing that occurs in 1100 and 3003. Applications: Used in a wide variety of applications from aircraft components to home appliances, marine and transportation industry parts, heavy duty cooking utensils and equipment for bulk processing of food.
5052-0
Mill Finish
Interleaved
AMS-QQ-A-250/8 AMS 4015 ASTM B209 |
| Aluminum Sheet and Coil - Series 5052-H32
5052 is the highest strength alloy of the more common non heat-treatable grades. Fatigue strength is higher than most aluminum alloys. In addition, this grade has particularly good resistance to marine atmosphere and salt water corrosion. It has excellent workability. It may be drawn or formed into intricate shapes and its slightly greater strength in the annealed condition minimizes tearing that occurs in 1100 and 3003. Applications: Used in a wide variety of applications from aircraft components to home appliances, marine and transportation industry parts, heavy duty cooking utensils and equipment for bulk processing of food.
5052-H32
Mill Finish
AMS-QQ-A-250/8 AMS 4016 ASTM B209 |
| Aluminum Sheet and Coil - Series 5052-H34
5052 is the highest strength alloy of the more common non heat-treatable grades. Fatigue strength is higher than most aluminum alloys. In addition, this grade has particularly good resistance to marine atmosphere and salt water corrosion. It has excellent workability. It may be drawn or formed into intricate shapes and its slightly greater strength in the annealed condition minimizes tearing that occurs in 1100 and 3003. Applications: Used in a wide variety of applications from aircraft components to home appliances, marine and transportation industry parts, heavy duty cooking utensils and equipment for bulk processing of food.
5052-H34
Mill Finish
AMS-QQ-A-250/8 AMS 4016 ASTM B209 |
 | Aluminum Sheet - 5086-H116
For many years there has been a need for aluminum sheet and plate alloys that would offer, for high strength welded applications, several distinct benefits over such alloys as 5052 and 6061. Some of the benefits fabricators have been seeking are greater design efficiency, better welding characteristics, good forming properties, excellent resistance to corrosion and the same economy as in other non heat-treatable alloys. Metallurgical research has developed 5083 and 5086 as superior wieldable alloys which fill these needs. Both alloys have virtually the same characteristics with 5083 having slightly higher mechanical properties due to the increased manganese content over 5086. Applications: unfired pressure vessels, missile containers, heavy-duty truck and trailer assemblies, boat hulls and superstructures.
5086-H116
Mill Finish
ASTM B209 |
| Aluminum Sheet - 6061-0
6061 is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form (′′Alclad′′) with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required.
6061-0
Heat Treatable Interleaved
AMS-QQ-A-250/11 AMS 4025 |
| Aluminum Sheet - 6061-T4
6061 is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form (′′Alclad′′) with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required.
6061-T4
Interleaved
AMS-QQ-Q-250/11 AMS 4026 |
| Aluminum Sheet - 6061-T6
6061 is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form (′′Alclad′′) with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required.
6061-T6
Interleaved
AMS-QQ-Q-250/11 AMS 4027 |
| Aluminum Sheet -7075-0
7075 is one of the highest strength aluminum alloys available Its strength-to weight ratio is excellent and it is ideally used for highly stressed parts. It may be formed in the annealed condition and subsequently heat treated. Spot or flash welding can be used, although arc and gas welding are not recommended. It is available in the clad (′Alclad′′) form to improve the corrosion resistance with the over-all high strength being only moderately affected. Applications: Used where highest strength is needed.
7075-0 BARE
Heat Treatable, Interleaved and Stenciled
AMS-QQ-A-250/12 AMS 4044 |
| Aluminum Sheet -7075-T6 Bare
7075 is one of the highest strength aluminum alloys available Its strength-to weight ratio is excellent and it is ideally used for highly stressed parts. It may be formed in the annealed condition and subsequently heat treated. Spot or flash welding can be used, although arc and gas welding are not recommended. It is available in the clad (′Alclad′′) form to improve the corrosion resistance with the over-all high strength being only moderately affected. Applications: Used where highest strength is needed.
7075-T6 Bare
Interleaved and Stenciled
AMS-QQ-A-250/12 AMS 4045 |
| Aluminum Sheet - 7075-0 Alclad
7075 is one of the highest strength aluminum alloys available Its strength-to weight ratio is excellent and it is ideally used for highly stressed parts. It may be formed in the annealed condition and subsequently heat treated. Spot or flash welding can be used, although arc and gas welding are not recommended. It is available in the clad (′Alclad′′) form to improve the corrosion resistance with the over-all high strength being only moderately affected. Applications: Used where highest strength is needed.
7075-0 Alclad
Heat Treatable, Interleaved and Stenciled
AMS-QQ-A-250/13 AMS 4048 |
| Aluminum Sheet - 7075-T6 Alclad
7075 is one of the highest strength aluminum alloys available Its strength-to weight ratio is excellent and it is ideally used for highly stressed parts. It may be formed in the annealed condition and subsequently heat treated. Spot or flash welding can be used, although arc and gas welding are not recommended. It is available in the clad (′Alclad′′) form to improve the corrosion resistance with the over-all high strength being only moderately affected. Applications: Used where highest strength is needed.
7075-T6 Alclad
Interleaved and Stenciled
AMS-QQ-A-250/13 AMS 4049 |
| Painted Aluminum Sheet - Series 5052-H291
5052 is the highest strength alloy of the more common non heat-treatable grades. Fatigue strength is higher than most aluminum alloys. In addition, this grade has particularly good resistance to marine atmosphere and salt water corrosion. It has excellent workability. It may be drawn or formed into intricate shapes and its slightly greater strength in the annealed condition minimizes tearing that occurs in 1100 and 3003. Applications: Used in a wide variety of applications from aircraft components to home appliances, marine and transportation industry parts, heavy duty cooking utensils and equipment for bulk processing of food.
5052-H291
Polyester White Coil and Flat Sheet |
 | Aluminum Rectangles - Series 2024
2024 is one of the best known of the high strength aluminum alloys. With its high strength and excellent fatigue resistance, it is used to advantage on structures and parts where good strength-to-weight ratio is desired. It is readily machined to a high finish. It is readily formed in the annealed condition and may be subsequently heat treated. Arc or gas welding is generally not recommended, although this alloy may be spot, seam or flash welded. Since corrosion resistance is relatively low, 2024 is commonly used with an anodized finish or in clad form (′′Alclad′′) with a thin surface layer of high purity aluminum. Applications: aircraft structural components, aircraft fittings, hardware, truck wheels and parts for the transportation industry.
2024-T4 2024-T351
AMS-QQ-A-225/6 AMS 4120 ASTM B211 UNS A92024 |
| Aluminum Rectangles - Series 2024-T351
2024 is one of the best known of the high strength aluminum alloys. With its high strength and excellent fatigue resistance, it is used to advantage on structures and parts where good strength-to-weight ratio is desired. It is readily machined to a high finish. It is readily formed in the annealed condition and may be subsequently heat treated. Arc or gas welding is generally not recommended, although this alloy may be spot, seam or flash welded. Since corrosion resistance is relatively low, 2024 is commonly used with an anodized finish or in clad form (′′Alclad′′) with a thin surface layer of high purity aluminum. Applications: aircraft structural components, aircraft fittings, hardware, truck wheels and parts for the transportation industry
2024-T351
AMS-OQ-A-225/5 AMS 4120 ASTM B211 UNS A92024 |
| Aluminum Rectangles - Series 6061-T6
6061 is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form (′′Alclad′′) with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required.
6061-T6
Stock Lengths 12′ (Sharp Comers)
ASTM B221 AMS 4173 |
| Aluminum Rectangles - Series 6061-T6511
6061 is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form (′′Alclad′′) with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required.
6061-T6511
Stock Lengths 12′ (Sharp Comers)
ASTM B221 AMS 4173 |
| Aluminum Rectangles - Series 6061
6061 is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form (′′Alclad′′) with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required
6061-T6
Stock Lengths 12′ (Sharp Corners)
ASTM B221 AMS4173 |
| Aluminum Rectangles - Series 6063-T5
6063 is commonly referred to as the architectural alloy. It was developed as an extrusion alloy with relatively high tensile properties, excellent finishing characteristics and a high degree of resistance to corrosion. This alloy is most often found in various interior and exterior architectural applications, such as windows, doors, store fronts and assorted trim items. It is the alloy best suited for anodizing applications - either plain or in a variety of colors
6063-T5 6063-T52
Stock Lengths 16′ (Sharp Corners)
ASTM B221 |
| Aluminum Rectangles - Series 6063-T52
6063 is commonly referred to as the architectural alloy. It was developed as an extrusion alloy with relatively high tensile properties, excellent finishing characteristics and a high degree of resistance to corrosion. This alloy is most often found in various interior and exterior architectural applications, such as windows, doors, store fronts and assorted trim items. It is the alloy best suited for anodizing applications - either plain or in a variety of colors
6063-T5 6063-T52
Stock Lengths 16′ (Sharp Corners)
ASTM B221 |
 | Coiled Aluminum Tube
3003 is the most widely used of all aluminum alloys. It is essentially commercially pure aluminum with the addition of manganese which increases the strength some 20% over the 1100 grade. Thus, it has all the excellent characteristics of 1100 with higher strength. It has excellent corrosion resistance. It has excellent workability and it may be deep drawn or spun, welded or brazed. It is non heat treatable. Applications: cooking utensils. decorative trim, awnings, siding, storage tanks, chemical equipment.
3003-0
50′ Coils Soft Annealed All Purpose
ASTM B483 AMS 4065 UNS A93003 |
| Aluminum Furniture Tubing
6063 grade is commonly referred to as the architectural alloy. It was developed as an extrusion alloy with relatively high tensile properties, excellent finishing characteristics and a high degree of resistance to corrosion. This alloy is most often found in various interior and exterior architectural applications, such as windows, doors, store fronts and assorted trim items. It is the alloy best suited for anodizing applications - either plain or in a variety of colors.
6063-T832
Bright surface finish
ASTM B483 UNS A96063 |
| Aluminum Drawn Tubing
6061 is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form (′′Alclad′′) with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required.
6061-T6
AMS 4082
12′ Stock Length |
| Aluminum Round Tubing
6061 is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form (′′Alclad′′) with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required.
6061-T6511 6061-T6
Seamless Extruded Tubing
24′ Stock Lengths
AMS-QQ-A-200/8 (Structural) ASTM B241 (Seamless) |
 | Aluminum Rectangular Tubing
6063 grade is commonly referred to as the architectural alloy. It was developed as an extrusion alloy with relatively high tensile properties, excellent finishing characteristics and a high degree of resistance to corrosion. This alloy is most often found in various interior and exterior architectural applications, such as windows, doors, store fronts and assorted trim items. It is the alloy best suited for anodizing applications - either plain or in a variety of colors.
6063-T52
Extruded Stock Lengths 21 ′′1′′ (Sharp Inside and Outside Corners)
AMS-QQ-A-200/9 |
 | Aluminum Square Tubing - Series 6063-T52
6063 grade is commonly referred to as the architectural alloy. It was developed as an extrusion alloy with relatively high tensile properties, excellent finishing characteristics and a high degree of resistance to corrosion. This alloy is most often found in various interior and exterior architectural applications, such as windows, doors, store fronts and assorted trim items. It is the alloy best suited for anodizing applications - either plain or in a variety of colors.
6063-752
Extruded Stock Lengths 21′ 1′′ (Sharp Inside and Outside Corners)
AMS-QQ-A-200/9 |
| Aluminum Square Tubing - Series 6061-T6
6061 is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form (′′Alclad′′) with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required.
6061-T6
Extruded Stock Lengths 24′ (Sharp Inside and Outside Corners)
AMS-QQ-A-200/8
|
 | Structural Aluminum Pipe - Series 6063-T6
6063 grade is commonly referred to as the architectural alloy. It was developed as an extrusion alloy with relatively high tensile properties, excellent finishing characteristics and a high degree of resistance to corrosion. This alloy is most often found in various interior and exterior architectural applications, such as windows, doors, store fronts and assorted trim items. It is the alloy best suited for anodizing applications - either plain or in a variety of colors.
6063-T6 Schedule 40
20′ Lengths
ASTM B429 UNS A96063 |
 | Structural Aluminum Pipe - Series 6061-T6
6061 is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form (′′Alclad′′) with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required.
6061-T6 Schedule 40
20′ Lengths
ASTM B429 UNS A96063 UNS A96061 |
 | Structural Handrail Pipe
6063 grade is commonly referred to as the architectural alloy. It was developed as an extrusion alloy with relatively high tensile properties, excellent finishing characteristics and a high degree of resistance to corrosion. This alloy is most often found in various interior and exterior architectural applications, such as windows, doors, store fronts and assorted trim items. It is the alloy best suited for anodizing applications - either plain or in a variety of colors.
6063-T6 Schedule 40
Not Stenciled
20′ Lengths
Boxed and Interleaved |
 | Seamless Aluminum Pipe - Series 6061-T6 Schedule 40
6061 is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form (′′Alclad′′) with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required.
6061-T6 Schedule 40
20′ Lengths
ASTM B241 UNS A96061 |
| Seamless Aluminum Pipe - Series 6061-T6 Schedule 80
6061 is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form (′′Alclad′′) with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required.
6061-T6
Schedule 80
20′ Lengths
ASTM B241 UNS A96061 |
| Seamless Aluminum Pipe - Series 6063-T6 Schedule 10
6063 grade is commonly referred to as the architectural alloy. It was developed as an extrusion alloy with relatively high tensile properties, excellent finishing characteristics and a high degree of resistance to corrosion. This alloy is most often found in various interior and exterior architectural applications, such as windows, doors, store fronts and assorted trim items. It is the alloy best suited for anodizing applications - either plain or in a variety of colors.
6063-T6
Schedule 10
20′ Lengths Stenciled
ASTM B241 UNS A96063 |
| Seamless Aluminum Pipe - Series 6063-T6 Schedule 40
6063 grade is commonly referred to as the architectural alloy. It was developed as an extrusion alloy with relatively high tensile properties, excellent finishing characteristics and a high degree of resistance to corrosion. This alloy is most often found in various interior and exterior architectural applications, such as windows, doors, store fronts and assorted trim items. It is the alloy best suited for anodizing applications - either plain or in a variety of colors.
6063-T6
Schedule 40
20′ Lengths Stenciled
ASTM B241 UNS A96063 |
 | Round Leaded Commercial Bronze Rod
Leaded Brasses - Flat, stiff, free-cutting brass for blanking; clock, watch, and instrument frames; wheels and so on. Also used for engraving purposes.
Commercial Bronze, 90% - Rich bronze color. Resists season cracking and corrosion from weathering. For weather strip, costume jewelry, screw shells, primer cups; electric fixtures for outdoor use.
12′ Mill Lengths
Specifications:
CDA 314 ASTM B140
UNS C31400
Nominal Composition:
Copper: 89% Zinc: 9.1% Lead: 1.9% |
| Hex Leaded Commercial Bronze Rod
Leaded Brasses - Flat, stiff, free-cutting brass for blanking; clock, watch, and instrument frames; wheels and so on. Also used for engraving purposes.
Commercial Bronze, 90% - Rich bronze color. Resists season cracking and corrosion from weathering. For weather strip, costume jewelry, screw shells, primer cups; electric fixtures for outdoor use.
12′ Mill Lengths
Specifications:
CDA316 ASTM B140
UNS C31600
Nominal Composition:
Copper: 89% Zinc: 8.1% Lead: 1.9% Ni: 1% |
 | Continuous Cast Bearing Bronze Round Solid Bar
Aluminum Bronze - Malleability, strength and good corrosion resistance to liquids and gasses make this alloy good for bolts and screw products, and components for pole line hardware.
105′′ Stock Lengths
Specifications:
UNS C93200 CDA 932 SAE 660
ASTM B505 (932)
Nominal Composition:
Copper: 83% Tin: 7% Lead: 7% Zinc: 3%
We will cut to any length. |
| Continuous Cast Bearing Bronze Hollow Round Bar
Aluminum Bronze - Malleability, strength and good corrosion resistance to liquids and gasses make this alloy good for bolts and screw products, and components for pole line hardware.
105′′ Stock Lengths
Specifications:
SAE 660 AMS None
ASTM B505 (932)
UNS C93200
CDA932
Nominal Composition:
Copper: 83% Tin: 7% Lead: 7% Zinc: 3%
We will cut to any length. |
| Round Aluminum Bronze Rod
Aluminum Bronze - Malleability, strength and good corrosion resistance to liquids and gasses make this alloy good for bolts and screw products, and components for pole line hardware.
12′ Mill Lengths
Specification:
CDA 642 ASTM B150
UNS C64200
Nominal Composition:
Copper: 91.2% Aluminum: 7%
Silicon: 1.8% |
| Aluminum Bronze Solid Round Bar
Aluminum Bronze - Malleability, strength and good corrosion resistance to liquids and gasses make this alloy good for bolts and screw products, and components for pole line hardware.
Applications: Recommended for heavier duty applications involving wear abrasion and fatigue, such as worm gears and wheels, adjusting nuts, collets, plungers, pump rods, sleeve bearings, valve and guide pin bushings. Aluminum bronze, in extruded and continuous cast rectangular bar, provides maximum metal-to-metal wear resistance for wear plates, guides, support trails, hold-down bars, gibs and wear, liners, fingers, straightening dies, racks, work rest blades, runout table slides, wear strips, shoes, mold inserts and scraper blades.
Standard Lengths: 144′′ and 72′′
Specifications:
CDA 954 ASTM B505
UNS 95400 |
| Aluminum Bronze Plates, Squares and Rectangles
Aluminum Bronze - Malleability, strength and good corrosion resistance to liquids and gasses make this alloy good for bolts and screw products, and components for pole line hardware.
Applications: Recommended for heavier duty applications involving wear abrasion and fatigue, such as worm gears and wheels, adjusting nuts, collets, plungers, pump rods, sleeve bearings, valve and guide pin bushings. Aluminum bronze, in extruded and continuous cast rectangular bar, provides maximum metal-to-metal wear resistance for wear plates, guides, support trails, hold-down bars, gibs and wear, liners, fingers, straightening dies, racks, work rest blades, runout table slides, wear strips, shoes, mold inserts and scraper blades.
Standard Lengths: 144′′ and 72′′
Specifications:CDA 954 UNS 95400 |
| Aluminum Bronze Hollow Round Bar
Aluminum Bronze - Malleability, strength and good corrosion resistance to liquids and gasses make this alloy good for bolts and screw products, and components for pole line hardware.
Applications: Recommended for heavier duty applications involving wear abrasion and fatigue, such as worm gears and wheels, adjusting nuts, collets, plungers, pump rods, sleeve bearings, valve and guide pin bushings. Aluminum bronze, in extruded and continuous cast rectangular bar, provides maximum metal-to-metal wear resistance for wear plates, guides, support trails, hold-down bars, gibs and wear, liners, fingers, straightening dies, racks, work rest blades, runout table slides, wear strips, shoes, mold inserts and scraper blades.
Standard Lengths: 144′′ and 72′′
Specifications:CDA 954 ASTM B505 UNS 95400 |
 | Monel 400 Sheet
A nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water, hydrofluoric acid, sulfuric acid and alkalies. Used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners and heat exchangers. Standard product forms are round, hexagon, flats, forging stock, pipe, tube, plate, sheet, strip and wire. |
| Inconel 600 Sheet
A nickel-chromium alloy with good oxidation resistance at high temperatures and resistance to chloride-ion stress-corrosion cracking, corrosion by high-purity water, and caustic corrosion. Used for furnace components, in chemical and food processing, in nuclear engineering and for sparking electrodes. Standard product forms are round, hexagon, extruded section, flats, forging stock, pipe, tube, plate, sheet, strip and wire. |
| Inconel 601 Sheet
A nickel-chromium alloy with an addition of aluminum for outstanding resistance to oxidation and other forms of high-temperature corrosion. It also has high mechanical properties at elevated temperatures. Used for industrial furnaces; heat-treating equipment such as baskets, muffles and retorts; petrochemical and other process equipment; and gas-turbine components. Standard product forms are round, flats, forging stock, pipe, tube, plate, sheet, strip and wire. |
| Inconel 625 Sheet
A nickel-chromium-molybdenum alloy with an addition of niobium that acts with the molybdenum to stiffen the alloy′s matrix and thereby provide high strength without a strengthening heat treatment. The alloy resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Used in chemical processing, aerospace and marine engineering, pollution-control equipment and nuclear reactors. Standard product forms are round, flats, forging stock, extruded section, pipe, tube, plate, sheet, strip and wire. |
| Inconel 718 Sheet
A precipitation-harden able, nickel-chromium alloy containing also-significant amounts of iron, niobium and molybdenum, along with lesser amounts of aluminum and titanium. It combines corrosion resistance and high strength with outstanding weld ability, including resistance to post weld cracking. The alloy has excellent creep-rupture strength at temperatures to 1300°F (700°C). Used in gas turbines, rocket motors, space-craft, nuclear reactors, pumps and tooling. Standard product forms are round, flats, extruded section, pipe, tube, forging stock, plate, sheet, strip and wire. |
| Inconel X-750 Sheet
A nickel-chromium alloy similar to INCONEL alloy 600 but made precipitation hardenable by additions of aluminum and titanium. The alloy has good resistance to corrosion and oxidation along with high tensile and creep-rupture properties at temperatures to about 1300°F (700°C). Its excellent relaxation resistance is useful for high-temperature springs and bolts. Used in gas turbines, rocket engines, nuclear reactors, pressure vessels, tooling and aircraft structures. Standard product forms are round, flats, extruded section, forging stock, plate, sheet, strip, pipe, tube and wire. |
| Incoloy 800HT Sheet
A nickel-iron-chromium alloy with good strength and excellent resistance to oxidation and carburization in high-temperature atmospheres. It also resists corrosion by many aqueous environments. The alloy maintains a stable, austenitic structure during prolonged exposure to high temperatures. Used for process piping, heat exchangers, carburizing equipment, heating-element sheathing and nuclear steam-generator tubing. Standard product forms are round, flats, forging stock, pipe, tube, plate, sheet, strip and wire. |
| Incoloy 825 Sheet
A nickel-iron-chromium alloy with good strength and excellent resistance to oxidation and carburization in high-temperature atmospheres. It also resists corrosion by many aqueous environments. The alloy maintains a stable, austenitic structure during prolonged exposure to high temperatures. Used for process piping, heat exchangers, carburizing equipment, heating-element sheathing and nuclear steam-generator tubing. Standard product forms are round, flats, forging stock, pipe, tube, plate, sheet, strip and wire. |
| Nicrofer 59 Sheet
A nickel-chromium-molybdenum alloy with extra low carbon and silicon content. The alloy has excellent corrosion resistance and high mechanical strength. It is characterized by excellent resistance to pitting and crevice corrosion. The alloy is particularly good in applications using sulphuric and hydrochloric acid mixtures. Used in flue gas sesulphurisation (FGD) applications for scrubbers, reheaters, dampers, fans, and agitators; components for sour gas service; digesters in the pulp industry; and chemical processing equipment. |
| Inco C-276 Sheet
A nickel-molybdenum-chromium alloy with an addition of tungsten, having excellent corrosion resistance in a wide range of severe environments. The high molybdenum content makes the alloy especially resistant to pitting and crevice corrosion. The low carbon content minimizes carbide precipitation during welding to maintain corrosion resistance in as-welded structures. Used in pollution control, chemical processing, pulp and paper production, and waste treatment. Standard product forms are round, forging stock, pipe, tube, plate, sheet, strip and wire. |
| Monel 400 Plate
A nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water, hydrofluoric acid, sulfuric acid and alkalies. Used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners and heat exchangers. Standard product forms are round, hexagon, flats, forging stock, pipe, tube, plate, sheet, strip and wire. |
| Inconel 601 Plate
A nickel-chromium alloy with an addition of aluminum for outstanding resistance to oxidation and other forms of high-temperature corrosion. It also has high mechanical properties at elevated temperatures. Used for industrial furnaces; heat-treating equipment such as baskets, muffles and retorts; petrochemical and other process equipment; and gas-turbine components. Standard product forms are round, flats, forging stock, pipe, tube, plate, sheet, strip and wire. |
| Incoloy 800HT Plate
A nickel-iron-chromium alloy with good strength and excellent resistance to oxidation and carburization in high-temperature atmospheres. It also resists corrosion by many aqueous environments. The alloy maintains a stable, austenitic structure during prolonged exposure to high temperatures. Used for process piping, heat exchangers, carburizing equipment, heating-element sheathing and nuclear steam-generator tubing. Standard product forms are round, flats, forging stock, pipe, tube, plate, sheet, strip and wire. |
| Incoloy 825 Plate
A nickel-iron-chromium alloy with additions of molybdenum and copper. It has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking, and to localized attack, such as pitting and crevice corrosion. The alloy is especially resistant to sulfuric and phosphoric acids. Used for chemical processing, pollution-control equipment, oil and gas well piping, nuclear fuel reprocessing, acid production, and pickling equipment. Standard product forms are round, flats, forging stock, pipe, tube, plate, sheet, strip and wire. |
| Inco 020 Plate
A nickel-iron-chromium alloy with additions of copper and molybdenum. It also contains niobium for stabilization against sensitization and resultant intergranular corrosion. The alloy has excellent resistance to general corrosion, pitting, and crevice corrosion in chemicals containing chlorides and sulfuric, phosphoric and nitric acids. Used for tanks, piping, heat exchangers, pumps, valves and other process equipment. Standard product forms are round, flats, pipe, tube, plate, sheet, strip and wire. |
| Nilo 36 Plate
A nickel-iron-chromium alloy with additions of copper and molybdenum. It also contains niobium for stabilization against sensitization and resultant intergranular corrosion. The alloy has excellent resistance to general corrosion, pitting, and crevice corrosion in chemicals containing chlorides and sulfuric, phosphoric and nitric acids. Used for tanks, piping, heat exchangers, pumps, valves and other process equipment. Standard product forms are round, flats, pipe, tube, plate, sheet, strip and wire. |
| Nicrofer 59 Plate
A nickel-chromium-molybdenum alloy with extra low carbon and silicon content. The alloy has excellent corrosion resistance and high mechanical strength. It is characterized by excellent resistance to pitting and crevice corrosion. The alloy is particularly good in applications using sulphuric and hydrochloric acid mixtures. Used in flue gas sesulphurisation (FGD) applications for scrubbers, reheaters, dampers, fans, and agitators; components for sour gas service; digesters in the pulp industry; and chemical processing equipment. |
| Monel 400 Rounds
A nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water, hydrofluoric acid, sulfuric acid and alkalies. Used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners and heat exchangers. Standard product forms are round, hexagon, flats, forging stock, pipe, tube, plate, sheet, strip and wire. |
| Monel 400 Squares
A nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water, hydrofluoric acid, sulfuric acid and alkalies. Used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners and heat exchangers. Standard product forms are round, hexagon, flats, forging stock, pipe, tube, plate, sheet, strip and wire. |
| Monel 400 Hexagons
A nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water, hydrofluoric acid, sulfuric acid and alkalies. Used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners and heat exchangers. Standard product forms are round, hexagon, flats, forging stock, pipe, tube, plate, sheet, strip and wire. |
| Inconel 690 Plate
A nickel-chromium alloy with an addition of aluminum for outstanding resistance to oxidation and other forms of high-temperature corrosion. It also has high mechanical properties at elevated temperatures. Used for industrial furnaces; heat-treating equipment such as baskets, muffles and retorts; petrochemical and other process equipment; and gas-turbine components. Standard product forms are round, flats, forging stock, pipe, tube, plate, sheet, strip and wire. |
| Inconel 625 Plate
A nickel-chromium-molybdenum alloy with an addition of niobium that acts with the molybdenum to stiffen the alloy′s matrix and thereby provide high strength without a strengthening heat treatment. The alloy resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Used in chemical processing, aerospace and marine engineering, pollution-control equipment and nuclear reactors. Standard product forms are round, flats, forging stock, extruded section, pipe, tube, plate, sheet, strip and wire. |
| Inconel 718 Plate
A precipitation-harden able, nickel-chromium alloy containing also-significant amounts of iron, niobium and molybdenum, along with lesser amounts of aluminum and titanium. It combines corrosion resistance and high strength with outstanding weld ability, including resistance to post weld cracking. The alloy has excellent creep-rupture strength at temperatures to 1300°F (700°C). Used in gas turbines, rocket motors, space-craft, nuclear reactors, pumps and tooling. Standard product forms are round, flats, extruded section, pipe, tube, forging stock, plate, sheet, strip and wire. |
| Inco C-276 Plate
A nickel-molybdenum-chromium alloy with an addition of tungsten, having excellent corrosion resistance in a wide range of severe environments. The high molybdenum content makes the alloy especially resistant to pitting and crevice corrosion. The low carbon content minimizes carbide precipitation during welding to maintain corrosion resistance in as-welded structures. Used in pollution control, chemical processing, pulp and paper production, and waste treatment. Standard product forms are round, forging stock, pipe, tube, plate, sheet, strip and wire. |
| Incoloy 800H Plate
A nickel-iron-chromium alloy with good strength and excellent resistance to oxidation and carburization in high-temperature atmospheres. It also resists corrosion by many aqueous environments. The alloy maintains a stable, austenitic structure during prolonged exposure to high temperatures. Used for process piping, heat exchangers, carburizing equipment, heating-element sheathing and nuclear steam-generator tubing. Standard product forms are round, flats, forging stock, pipe, tube, plate, sheet, strip and wire. |
| Monel 400 Cold Rolled Sheet
A nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water, hydrofluoric acid, sulfuric acid and alkalies. Used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners and heat exchangers. Standard product forms are round, hexagon, flats, forging stock, pipe, tube, plate, sheet, strip and wire. |
| Monel 400 Cold Worked Seamless Pipe - Schedule 10
A nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water, hydrofluoric acid, sulfuric acid and alkalies. Used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners and heat exchangers. Standard product forms are round, hexagon, flats, forging stock, pipe, tube, plate, sheet, strip and wire. |
| Monel 400 Cold Worked Seamless Pipe - Schedule 40
A nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water, hydrofluoric acid, sulfuric acid and alkalies. Used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners and heat exchangers. Standard product forms are round, hexagon, flats, forging stock, pipe, tube, plate, sheet, strip and wire. |
| Monel 400 Cold Worked Seamless Pipe - Schedule 80
A nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water, hydrofluoric acid, sulfuric acid and alkalies. Used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners and heat exchangers. Standard product forms are round, hexagon, flats, forging stock, pipe, tube, plate, sheet, strip and wire. |
| Monel 400 Cold Worked Seamless Pipe - Schedule 160
A nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water, hydrofluoric acid, sulfuric acid and alkalies. Used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners and heat exchangers. Standard product forms are round, hexagon, flats, forging stock, pipe, tube, plate, sheet, strip and wire. |
| Monel 400 Cold Worked Seamless Pipe - Schedule DEH
A nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water, hydrofluoric acid, sulfuric acid and alkalies. Used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners and heat exchangers. Standard product forms are round, hexagon, flats, forging stock, pipe, tube, plate, sheet, strip and wire. |
 | Stainless Steel Plate - Type 304L
Improved Machinability - This plate offers better machinability than commercially produced stainless steel plate.
Hot Rolled, Annealed and Pickled
A.S.T.M. A240/A480
A.S.T.M. A262 Prac E
ASME SA-240 |
| Stainless Steel Plate - Type 316
Improved Machinability - This plate offers better machinability than commercially produced stainless steel plate.
Hot Rolled, Annealed and Pickled
A.S.T.M. A240/A480
A.S.T.M. A262 Prac E
ASME SA-240 |
| Stainless Steel Plate - Type 316L
Improved Machinability - This plate offers better machinability than commercially produced stainless steel plate.
Hot Rolled, Annealed and Pickled
A.S.T.M. A240/A480
A.S.T.M. A262 Prac E
ASME SA-240 |
 | Hexagon Stainless Steel Bar - Type 303
Cold Drawn - Annealed
10′ - 14′ Random Lengths
A.S.T.M. A276 (except 303)
Integris Metals will cut to any length you desire. With our precision high-speed equipment, we can give prompt attention to large and small cut piece requirements. |
| Hexagon Stainless Steel Bar - Type 304
Cold Drawn - Annealed
10′ - 14′ Random Lengths
A.S.T.M. A276 (except 303)
Integris Metals will cut to any length you desire. With our precision high-speed equipment, we can give prompt attention to large and small cut piece requirements. |
| Hexagon Stainless Steel Bar - Type 316
Cold Drawn - Annealed
10′ - 14′ Random Lengths
A.S.T.M. A276 (except 303)
Integris Metals will cut to any length you desire. With our precision high-speed equipment, we can give prompt attention to large and small cut piece requirements. |
| Hexagon Stainless Steel Bar - Type 416
Cold Drawn - Annealed
10′ - 14′ Random Lengths
A.S.T.M. A276 (except 303)
Integris Metals will cut to any length you desire. With our precision high-speed equipment, we can give prompt attention to large and small cut piece requirements. |
 | Square Stainless Steel Bar - Type 303
Cold Drawn - Annealed
10′ - 14′ Random Lengths
A.S.T.M. A276 (except 303)
Integris Metals will cut to any length you desire. With our precision high-speed equipment, we can give prompt attention to large and small cut piece requirements. |
| Square Stainless Steel Bar - Type 304
Cold Drawn - Annealed
10′ - 14′ Random Lengths
A.S.T.M. A276 (except 303)
Integris Metals will cut to any length you desire. With our precision high-speed equipment, we can give prompt attention to large and small cut piece requirements. |
| Square Stainless Steel Bar - Type 316
Cold Drawn - Annealed
10′ - 14′ Random Lengths
A.S.T.M. A276 (except 303)
Integris Metals will cut to any length you desire. With our precision high-speed equipment, we can give prompt attention to large and small cut piece requirements. |
| Square Stainless Steel Bar - Type 416
Cold Drawn - Annealed
10′ - 14′ Random Lengths
A.S.T.M. A276 (except 303)
Integris Metals will cut to any length you desire. With our precision high-speed equipment, we can give prompt attention to large and small cut piece requirements. |
 | Rectangular Stainless Steel Bar - Type 304
10′ - 14′ Random Lengths
Annealed and Pickled A.S.T.M. A276
(Both HRAP ′′True Bar′′ and Sheared and Edged Bar available)
Standard sizes also available in low carbon grade (304-L)
Also available as slit or sheared edge conditioned bar (1/8′′-1/2′′). Rectangular bars stocked as both cut from plate and true rolled bar. |
| Rectangular Stainless Steel Bar - Type 316
10′ - 14′ Random Lengths
Annealed and Pickled
A.S.T.M. A276
Standard sizes also available in low carbon grade (304-L)
Also available as slit or sheared edge conditioned bar (1/8′′-1/2′′). |
 | Equal Legs Angle - Type 304
Hot Rolled, Annealed and Pickled
20′ Random Lengths A.S.T.M. A276
Most sizes also available in low carbon grade (304L, 316L) |
| Equal Legs Angle - Type 316
Hot Rolled, Annealed and Pickled
20′ Random Lengths A.S.T.M. A276
Most sizes also available in low carbon grade (304L, 316L) |
 | Seamless Stainless Steel Tube - Type 304
Welded and Seamless Cold Drawn, Annealed and Pickled
20′ Random Lengths
Specifications:
Seamless Tube ASTM A269 and A213.
Welded Tube ASTM A269 and A249.
Hollow Bar AMS 5639 (304 only) and ASTM A511 |
| Seamless Stainless Steel Tube - Type 316
Welded and Seamless Cold Drawn, Annealed and Pickled
20′ Random Lengths
Specifications:
Seamless Tube ASTM A269 and A213.
Welded Tube ASTM A269 and A249.
Hollow Bar AMS 5639 (304 only) and ASTM A511 |
| Welded Stainless Steel Tube - Type 304
Welded and Seamless Cold Drawn, Annealed and Pickled
20′ Random Lengths
Specifications:
Seamless Tube ASTM A269 and A213.
Welded Tube ASTM A269 and A249.
Hollow Bar AMS 5639 (304 only) and ASTM A511 |
| Welded Stainless Steel Tube - Type 316
Welded and Seamless Cold Drawn, Annealed and Pickled
20′ Random Lengths
Specifications:
Seamless Tube ASTM A269 and A213.
Welded Tube ASTM A269 and A249.
Hollow Bar AMS 5639 (304 only) and ASTM A511 |
 | Stainless Steel Coil and Strip
- Austenitic (Chrome Nickel)
- Good Cold Working
- Good Elongation in Full Hard Condition
- Good Fatigue Life
- High Strength to Weight Ratio
- Work Hardens Readily - so is in demand in harder tempers
- Not Heat-treatable for Hardening Purposes
- Non-magnetic in Annealed Condition
- Slightly Magnetic in Work-hardened Condition
- Good Heat and Corrosion Resistance
- Welds Easily
- Solution Annealed by Cooling Rapidly from 2000°F in Air or Water.
|
| Titanium Plates Metric - CP Grade 7
Most resistant Ti alloy to corrosion in reducing acids and localized attack in hot halide media, with physical/mechanical properties equivalent to Grade 2 and excellent weldability/fabricability.
Ingot/Bloom, Bar, Billet, Plate, Strip, Welded Tubing/Pipe, Wire |
| Titanium Plates Metric - Grade 19
A heat-treatable, deep section hardenable, very high strength Ti alloy possessing good toughness/strength properties, low elastic modulus and elevated resistance to stress and localized corrosion in high temperature sweet and sour brines with exceptional hot-die forgeability, but limited weldability. Approved for sour service under the NACE MR-0175 Standard.
Ingot/Bloom, Bar, Billet, Seamless Pipe |
 | Titanium Sheet Imperial - CP Grade 7
Most resistant Ti alloy to corrosion in reducing acids and localized attack in hot halide media, with physical/mechanical properties equivalent to Grade 2 and excellent weldability/fabricability.
Ingot/Bloom, Bar, Billet, Plate, Strip, Welded Tubing/Pipe, Wire |
| Titanium Sheet Imperial - Grade 19
A heat-treatable, deep section hardenable, very high strength Ti alloy possessing good toughness/strength properties, low elastic modulus and elevated resistance to stress and localized corrosion in high temperature sweet and sour brines with exceptional hot-die forgeability, but limited weldability. Approved for sour service under the NACE MR-0175 Standard.
Ingot/Bloom, Bar, Billet, Seamless Pipe |
| Titanium Sheet Metric - CP Grade 7
Most resistant Ti alloy to corrosion in reducing acids and localized attack in hot halide media, with physical/mechanical properties equivalent to Grade 2 and excellent weldability/fabricability.
Ingot/Bloom, Bar, Billet, Plate, Strip, Welded Tubing/Pipe, Wire |
|
Tell your suppliers you found them on ThomasNet
