ThomasNet.com
Home > Catalog Navigator - Valves: Control

Ross Valve Manufacturing Co.


http://www.rossvalve.com  
Phone: 518-274-0961
Fax: 518-274-0210
Address:
6 Oakwood Avenue
Troy, NY 12181-0059
map
Tell your suppliers you found them on ThomasNet
Product Catalog

Valves: Control related categories

Altitude / Level Control Valves
Prevent overflow of a tank/basin via hydraulic pilot, electric solenoids, or float device.
Pump Control Valves
Minimizes start/stop surges associated with pump operation.
Rate of Flow Control Valves
Maintains a constant flow rate in a line.
Check Valves
Prevents reverse flow in a line.
Electrically Operated Valves
Use an electric signal to open, close or throttle the valve.
Extreme Service Valves
Safely control pressure or flow in extreme conditions.
Safety Valves
Automatically open or close in a variety of emergency conditions.
23WR - Pilot Operated Pressure Reducing Valve
Purpose: Automatically throttles to prevent outlet pressure from exceeding a maximum setting.
Primary Control: Hydraulic pilot valve
Sizes: 1′′ - 3′′
Standard Materials: Cast Iron body, bronze and stainless steel internals, bronze controls
End Connections: Flanged or Threaded (Female NPT)
Pressures: Up to 300 psi standard (higher options available)

Standard Features:
  • Heavy duty pilot valve
  • Strainer (with stainless steel filter)
  • Speed control valve
  • 1/4′′ rigid brass piping and isolation valves
  • Seat contour optimized for valve function
  • NSF Certified Epoxy coating
42AFCV-PT - Solenoid Operated (Throttling) Pressure Control Valve
Purpose: Automatically throttles to prevent outlet pressure from exceeding a maximum setting.
Primary Control: Electric Solenoid Valves (requires Control Panel and pressure sensing device)
Sizes: 4′′ - 48′′
Standard Materials: Cast Iron body/cap(s), bronze internals and controls
End Connections: Flanged
Pressures: Up to 300 psi standard (higher options available)

Standard Features:
  • Manual valve control (in case of a power failure)
  • Strainer (with 7 sq. in. stainless steel filter)
  • Independent Opening and Closing speed control valves
  • 1/2′′ rigid brass piping and isolation valves
  • Seat contour optimized for valve function
  • Valve position indicator
  • NSF Certified Epoxy coating
40WR - Pilot Operated Pressure Reducing Valve
Purpose: Automatically throttles to prevent outlet pressure from exceeding a maximum setting.
Primary Control: Hydraulic pilot valve
Sizes: 4′′ - 48′′
Standard Materials: Cast Iron body/cap(s), bronze internals and controls
End Connections: Flanged
Pressures: Up to 300 psi standard (higher options available)

Standard Features:
  • Heavy duty pilot valve
  • Strainer (with 7 sq. in. stainless steel filter)
  • Speed control valve
  • 1/2′′ rigid brass piping and isolation valves
  • Seat contour optimized for valve function
  • Valve position indicator
  • NSF Certified Epoxy coating
50RWR - Pilot Operated Back Pressure Sustaining Valve
Purpose: Automatically throttles to prevent inlet pressure from falling below a minimum setting.
Primary Control: Hydraulic pilot valve
Sizes: 4′′ - 48′′
Standard Materials: Cast Iron body/cap(s), bronze internals and controls
End Connections: Flanged
Pressures: Up to 300 psi standard (higher options available)

Standard Features:
  • Heavy duty pilot valve
  • Strainer (with 7 sq. in. stainless steel filter)
  • Speed control valve
  • 1/2′′ rigid brass piping and isolation valves
  • Seat contour optimized for valve function
  • Valve position indicator
  • NSF Certified Epoxy coating
23RWR - Internal Pilot Operated Pressure Relief Valve
Purpose: Automatically opens to prevent inlet pressure from exceeding a maximum setting. Located off the main line, can be supplied with optional hydraulic or electric surge anticipation feature to further minimize water hammer.
Primary Control: Hydraulic line pressure
Sizes: 1′′ - 3′′
Standard Materials: Cast Iron body, bronze and stainless steel internals
End Connections: Flanged or Threaded (Female NPT)
Pressures: Up to 300 psi standard (higher options available)

Standard Features:
  • Heavy duty diaphragm
  • Internal Strainer / Speed control
  • Single adjusting screw for easy pressure changes
  • NSF Certified Epoxy coating
Pump Control Valve
Reduces start/stop surges associated with pump operation.
Surge Control Valve
Protects a line from excessive pressure by anticipating a pressure surge.
70SWR - Direct Acting Pressure Relief Valve for Wastewater
Purpose: Automatically opens to prevent inlet pressure in the main line from exceeding a maximum setting.
Primary Control: Hydraulic line pressure
Sizes: 4′′ - 48′′
Standard Materials: Cast Iron body/cap(s), bronze and stainless steel internals
End Connections: Flanged
Pressures: Up to 300 psi standard (higher options available)

Standard Features:
  • Cushioned closing
  • Fully enclosed springs
  • Single adjusting screw for easy pressure changes
  • 1/2′′ rigid brass piping and isolation valves
  • NSF Certified Epoxy coating
Pressure Relief Valve
Protects a line from excessive pressure.
Watertamer Series Valve
The Watertamer anti-cavitation feature is available as an option for nearly any type of Ross control valve. It provides excellent control characteristics, drip tight shut-off, and protection against cavitation damage.
Pressure Reducing Valve
Maintains a pre-determined downstream pressure
Back to top
Home | Browse Categories | Featured Companies Sitemap | Featured Categories Sitemap
Guides | Forums | FAQs | Contact ThomasNet | Provide Feedback

Log In to MyThomas | Sign Up for MyThomas | Log In to Client Center

Advertising Services | Free Listing | Press Room | Careers

© 2009 Thomas Publishing Company. All rights reserved. See Terms and Conditions or Privacy Statement. Last Modified December 24, 2009.
Sign Up | Log In | Product News | Promote Your Business