• Equivalent to Loctite® 222 Purple.
• Low strength for fasteners up to 1/4 inch diameter.

• Equivalent to Loctite® 242 Blue.
• Medium strength for fasteners up to 1/4 inch diameter and over.

• Equivalent to Loctite®
• High strength.

• Equivalent to Loctite® 290 Green.
• For use on preassembled fasteners.

• Equivalent to Loctite® 569 BROWN.
• Lock and seal connections

• Equivalent to Loctite® 565 WHITE.
• Ideal for tapered threads.

• Equivalent to Loctite® 592 OFF WHITE.
• Instant seal.

• Equivalent to Loctite® 755 CLEAR.
• For cleaning without leaving grease or oil residue.
• Pump

• Equivalent to Loctite® 768 CLEAR.
• Attacks and dissolves cured or uncured instant superglue.

• Equivalent to Loctite® 764 GREEN.
• Speeds curing time on inactive or very cold surfaces.

• Equivalent to Loctite® 747 YELLOW.
• Speeds curing of all anaerobic fluids.

• Equivalent to Loctite® 504 ORANGE.
• Eliminates most gaskets.

• Equivalent to Loctite® 515 PINK.
• For creating flexible gaskets.

• Equivalent to Loctite® 510 RED.
• For all types of metal parts, sealing and resisting temperatures up to 392° F.

Retains high flexibility, oil resistance properties through use of a patented adhesion system. Temperature range -75°F to 625°F intermittent: resists auto and shop fluids and vibration. Guaranteed not to leak. Also available in AUTOMATIC TUBE.

The original Blue. Replaces almost any cut gasket. Makes reliable ′′formed-in-place′′ gaskets that resist cracking. Shrinking and migrating. Coats pre-cut gaskets to increase reliability. Temperature range -65°F to 500°F intermittent; resists auto and shop fluids. First generation 1970-1980 gasket maker. Also available in AUTOMATIC TUBE™ dispenser.

Permatex® Ultra Silicones were developed to meet today′s technology changes. Sensorsafe, low odor, non-corrosive. Outstanding oil resistance and joint movement values. Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones. Temperature range -75°F to 500°F intermittent; resists auto and shop fluids and vibration. Guaranteed not to leak.

Formulated for high-temp applications, or heavy duty use such as towing, etc. Replaces almost any cut gasket. Makes reliable ′′formed-in-place′′ gaskets that resist cracking, shrinking and migrating caused by thermal cycling. Coats pre-cut gaskets to increase reliability. Temperature range -75°F to 650°F intermittent; resists auto and shop fluids. First generation 1970-1980 gasket maker. Also available in AUTOMATIC TUBE° dispenser.

Formulated for GM applications for oxygen sensor equipped engines. First generation 1970-1980 gasket maker. Temperature range -75°F to 659°F intermittent; resists auto and shop fluids.

For 4-cylinder, turbocharged, or high performance engines, the most advanced, high-temperature RTV silicone gasket available. Sensor-safe. Low odor, non-corrosive. Superior adhesion. Three times more oil resistant than conventional silicones. Eight times more flexible than cut gaskets. Temperature range -75°F to 700°F intermittent; resists auto and shop fluids and vibration. Guaranteed not to leak.

Designed exclusively for aluminum, iron and steel mating surfaces. OEM approved-use where OEs specify ′′anaerobic′′ gasket (cures in the absence of air). Eliminates preformed, precut paper, rubber and cork gaskets. Flexes with flanges that move in service.

Fast-drying. metallic copper sealant helps dissipate heat, prevent gasket burnout and improve heat transfer. Fills minor surface irregularities. Seals instantly. Fills hot spots and surface imperfections. Temperature range -50°F to 500°F. Resists all types of automotive fluids, especially gasoline.

Fast-drying adhesive and sealant dries to a highly tacky, non-brittle film. A reliable general adhesive. Temperature range -65°F to 500°F. Resists gasoline, oil, antifreeze, axle tube.

All-purpose adhesive that sets fast to seal and hold the heaviest of gaskets in place. Remains effective under extreme temperatures of -65°F to 450°F. Resists gasoline, oil, kerosene, propane and butane.

Low-strength threadlocker designed for precision aluminum fasteners under 1/4 inch (6mm) that require occasional adjustment. Removable with hand tools for easy disassembly. Non-corrosive, OE specified worldwide.

High strength, anaerobic adhesive secures slip and press fit assemblies. Adds up to 3000 psi holding power. Restores fit to worn or out-of-tolerance assemblies. Prevents surface corrosion, Requires special tools for removal.

All-purpose medium strength threadlocker. Ideal for all nut and bolt applications 1/4 inch or larger. Eliminates need for stocking expensive lock nuts and lockwashers. Locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly.

Locks and seals threaded fittings. Resists leakage, vibration loosening, moisture, hydraulic fluids and diesel fuels. Lubricates threads for easy assembly and disassembly. Won′t shred or wear like Teflon tape. Repositionable up to 24 hours.

High-strength threadlocker for heavy duty applications. Especially well suited for permanently locking studs and press fits. Adds 3000 psi holding power on slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loosening. Replaces set screws and snap rings. Locks against vibration loosening. Requires extra effort or special tools for removal.

Mid-strength threadlocker formulated for pre-assembled bolts, eliminates bolt removal. Wicks in to penetrate bolt threads. Fills voids to .005 inch Secures set screws and other adjustable assemblies after settings are completed. Removable with hand tools. Apply to assembled bolts.

Makes reliable, permanent thread repairs without drills, taps, tools or inserts. Restores worm, stripped or damaged threads and eliminates future corrosion, galling, seizing and rust. Effective up to 128 ft. lbs. of torque and between -65°F to 300°F. Repairs most metal to metal fasteners up to SAE grade 5 inch and 5.8 metric (coarse and fine).

A superior adhesive ideal for many applications including rubber, metal, auto/van carpeting and fabric-backed vinyl upholstery and automotive gaskets. Allows for repositioning parts after contact is made. Withstands extreme temperatures. Waterproof. Resists gasoline, kerosene, antifreeze and most solvents.

Approved and used by GM. Ford and Chrysler. Permanently remounts mirrors to windshields. Achieves handling strength in seconds; mirror-mounting strength in 15 minutes. Available in single and multi-applications.

General purpose, clear RTV indoor/outdoor sealant. Seals, bonds, repairs, mends and secures glass, metal, plastics fabric, vinyl, weather-stripping and vinyl tops. Protects electrical wiring. May be applied to horizontal or vertical surfaces. Waterproof and flexible. Temperature range -80°F to 450°F. Resists oil, water, weather, vibration, grease. Also available in Automatic Tube™ dispenser.

General purpose, black RTV indoor/outdoor sealant. Seals, bonds, repairs, mends and secures glass, metal, plastics, fabric vinyl, weather-stripping and vinyl tops. Protects electrical wiring. May be applied to horizontal or vertical surfaces. Waterproof and flexible. Temperature range -80°F to 450°F. Resists oil, water, weather, vibration, grease.

Instantly seals small holes in gas tank without tank removal sticks to ′′gasoline-wet′′ metal Dries to a hard but flexible seal. Hardens in 60 minutes. Easy to use, two-part epoxy ribbon. No measuring. Two times stronger on steel tanks than other epoxy tank repairs. Permanent.

Economical general purpose fitting sealant. Outperforms tapes and pipe dopes. Seals and resists pressure in air, oil, diesel fuel and hydraulic systems. Remains pliable at higher and lower temperatures. Temperature range -65°F to 300°F. Resists common shop fluids.

Silaprene Adhesive/Sealant is an exceptional one-part product that combines ease of application, versatility of use, high ultimate strength, permanent bonds and long service life. Adhesive/Sealant is a high quality, high solids elastomeric sealant that provides superior adhesion to a variety of surfaces. Bond strength improves with age.

• All kinds of metal, including galvanized.
• Wood, particleboard and plywood.
• Rubber, concrete, masonry and glass.
• Thermoplastics, such as ABS, styrene and polyolefins.
• Thermoset plastics like phenolic, polyurethane, polyesters and epoxies.
• Fiberglass and other fiber reinforced plastics.

• Extrusion or trowellable grades.
• Fast drying-tack-free in less than one hour.
• Excellent early strength, gets stronger with age.
• High strength bonds to most materials.
• Permanently resilient-resists vibration and stress caused by temperature cycling.
• Outstanding resistance to water, oils and greases, fuels, industrial chemicals, acids and bases.
• Resists cracking, chipping and peeling.
• Requires no mixing, priming or heating.
• Comes in several colors and is paintable.
• Exceptional weatherability.
• Forms a tight, long-lasting seal to most surfaces.
• Shelf life: 6 months at temperatures not to exceed 80°F.

• Base: Polychloroprene
• Colors: Gray, white, off-white, aluminum, black, beige
• Solvent: Toluene
• Solids: 50%
• Viscosity: Paste extrusion grade
• Weight/gallon: 9.2 pounds
• Specific gravity: 1.1
• Temperature range: -60°F to 250°F

Surfaces to be bonded should be cleaned of all dust, oils or other contaminates. A solvent wipe is often adequate. Bonds to rigid surfaces are usually improved by a solvent wipe followed with light abrasion (180 grit), and solvent wiping to remove abrasive residue. Dry surfaces thoroughly before applying adhesive.

Adhesive/Sealant can be applied by ordinary caulking guns or pressure pumping equipment. Pumping equipment should be of the follower-plate type and have a pump ratio of at least 40:1. Aro, Sinks, DeVilbiss, Graco and Lincoln all produce suitable equipment for handling this material.

Apply a bead of Adhesive/Sealant to one surface at temperatures above 40°F. When used as a sealant, the applied bead will shrink approximately 50%, so no tooling is necessary for most applications. The bead surface will be tack-free in 15-45 minutes, depending on ambient conditions. Initial set time is 4 hours, after which parts may be handled.

When used as an adhesive between two non-porous surfaces, solvent must escape through the edges of the bond line. Clamping, taping or use of mechanical fasteners to hold parts in place until Adhesive/Sealant develops strength is recommended. After 24 hours at room temperature, the product is considered self-holding. The use of a heat lamp at 150°F for 1 hour will speed solvent evaporation and accelerate strength build-up. An alternative technique is to: Apply product to one surface, press the two surfaces to be bonded together to ensure adhesive transfer, separate parts and allow to air dry 10-20 minutes, then press back together with good pressure.

Adhesive/Sealant is formulated for room temperature curing, and curing is initiated when a majority of the solvent has been evacuated from the bond line. Strength build-up is very fast in the early stages to give high holding power, with continued strength build-up over time.

Lower solids and viscosity grades of Adhesive/Sealant are available for alternative applications where better flow characteristics are required. These versions of the product are suitable for trowel ling or brushing, and can be pumped through lower power equipment, including Plews guns.

Precautionary Data
This product is extremely flammable. Vapors may form an explosive mixture with air. Precautions should be taken to keep product away from fire, sparks, motors and other sources of heat or flame. Turn off or deactivate any electrical equipment or sources of ignition. Adequate ventilation is required to keep vapor concentrations below the Threshold Limit Value.

• For professional or industrial use only.
• Read the container label and the Material Safety Data Sheet carefully before use.
• Keep away from children.
• Keep container closed when not in use.
• Store closed container under 80°F.
• This product contains toxic chemicals subject to the reporting requirements of Section 313 of the Emergency Planning and Community Right-to-Know act of 1986 and 40CFR 372.

When discarded, this material is hazardous waste. Do not reuse container or remove label. Safely d

Silaprene All Weather Sealant is a one-part solvent release product that combines excellent weather, UV and ozone resistance with ease of application to provide a long service life. All Weather Sealant is a high quality, high solids elastomeric sealant that provides superior surface adhesion to a variety of surfaces.

• All kinds of metal, including galvanized.
• Wood, particleboard and plywood.
• EPDM and other kinds of rubber.
• Thermoplastics, such as ABS, styrene and polyolefins.
• Thermoset plastics like phenolic, polyurethane, polyesters and epoxies.
• Fiberglass and other fiber reinforced plastics.
• Concrete, masonry and glass.

• Extrusion or trowel application.
• Fast drying-tack-free in less than one hour.
• Flexible seals to most materials.
• Outstanding resistance to water and moisture.
• Resists cracking, chipping and peeling.
• Requires no mixing, priming or heating.
• Comes in several colors and is paintable.
• Exceptional weatherability.
• Shelf life: 1 year at temperatures not to exceed 80°F.

• Base: EPDM rubber
• Colors: Gray, white, and black
• Solvent: Toluene
• Solids: 65%
• Viscosity: Paste extrusion grade
• Weight/gallon: 9.35 pounds
• Specific gravity: 1.1
• Temperature range: -65°F to 210°F

Surfaces to be bonded should be cleaned of all dust, oils or other contaminates. A solvent wipe is often adequate. Bonds to rigid surfaces are usually improved by a solvent wipe followed with light abrasion (180 grit), and solvent wiping to remove abrasive residue. Dry surfaces thoroughly before applying adhesive.

All Weather Sealant can be applied by ordinary caulking guns or pressure pumping equipment. Pumping equipment should be of the follower-plate type and have a pump ratio of at least 40:1. Aro, Binks, DeVilbiss, Graco and Lincoln all produce suitable equipment for handling this material.

Apply a bead of Adhesive/Sealant to one surface at temperatures above 40°F. The applied bead will shrink approximately 35%, so no tooling is necessary for most applications. The bead surface will be tack-free in 15-45 minutes, depending on ambient conditions.

Precautionary Data
This product is extremely flammable. Vapors may form an explosive mixture with air. Precautions should be taken to keep product away from fire, sparks, motors and other sources of heat or flame. Turn off or deactivate any electrical equipment or sources of ignition. Adequate ventilation is required to keep vapor concentrations below the Threshold Limit Value.

• For professional or industrial use only.
• Read the container label and the Material Safety Data Sheet carefully before use.
• Keep away from children.
• Keep container closed when not in use.
• Store closed container under 80°.
• This product contains toxic chemicals subject to the reporting requirements of Section 313 of the Emergency Planning and Community Right-to-Know act of 1986 and 40CFR 372.

When discarded, this material is hazardous waste. Do not reuse container or remove label. Safely dispose of container and contents in accordance with applicable Federal, State and local regulations.