Heaters related categories
 | Space-Ray Radiant Floor Heaters - RFPA Series
- 100,000, 212,000, & 250,000 Btu
- AGA certified , 100% gas shut-off / standing pilot
- All units are control tested prior to shipping
- RFPA10C I&O Manual
- RFPA10 & 21B I&O Manual
- RFPA25 I&O Manual
|
 | Infrared Tube RSTP Series Heaters
- BEST PERFORMER - This is a close to GREEN as you can get in Infrared !
- Factory assembled & tested - COMPLETELY ASSEMBLED OUT OF THE BOX, NO FIELD ASSEMBLY.
- Highest radiant efficiency tube heaters - firing temperatures average 900 f-1000 f
- Only requires two 2 mounting points oppossed to 5 mounting points on most other heaters
- Emitter tube calorized for long life & high radiant efficiency
- Monitoring light system for on-line diagnosis
- Unit is 13ft. 4′′ overall length - allows heater to fit between crane rail support post.
- Can be mounted from 14ft to 60ft.
- 40ft. On angle or up to 60ft. Horizontally.
- Space-Ray RSTP I&O Manual
- RSTP Factory Specs
|
 | Infrared Tube CB Series Heaters
- GREAT FOR GARAGE & RESTAURANT APPLICATIONS - Partial Assembly required.
- Compact size for easy installation from 8ft. To 12 ft mounting heights. A lower mounting height kit is required on installations of less than 8ft. Also, a decorative grille kit is offered for drop ceiling applications.
- U-Shaped Tube Heater
- Fully calorized aluminized steel tube
- Tube body pre-assembled
- Minimum field assembly required
- Unit overall length assembled is 9ft.3′′
- Space-Ray CB I&O Manual
- Coldblocker Factory Specs.
|
 | Infrared Tube LTU Series Heaters
- GOOD PERFORMER - U-SHAPED TUBE HEATER- Minimum Field Assembly Required.
- Pull-through system for increased radiant efficiency and more uniform tube temperature
- 20 models to fit your needs
- Direct spark ignition
- Fully calorized aluminized steel tube
- Tube body pre-assembled
- Minimum field assembly required
- Space-Ray LTU I&O Manual
- LTU40-175 Factory Specs.
- LTU180-250 Factory Specs
|
 | Infrared Tube LTS Series Heaters
- GOOD PERFORMER - STRAIGHT TUBE HEATER- Minimum Field Assembly Required.
- Pull-through system for increased radiant efficiency and more uniform tube temperature
- 55 + models to fit your needs
- Fully calorized aluminized steel tube
- Tube body pre-assembled
- Minimum field assembly required
- Space-Ray LTS I&O Manual
- LTS40-175 Factory specs
- LTS180-250 Factory specs
|
 | Infrared Tube ETS Series Heaters
- ECONOMY SERIES - STRAIGHT TUBE HEATER - Complete Assembly Required.
- Pull-through system for increased radiant efficiency & more uniform tube temperature
- 55 + models to fit your needs
- Direct spark ignition
- Fully calorized aluminized steel tube for 1st 10 ft, remainder is hot rolled steel
- COMPLETE field assembly required
- Space-Ray ETS I&O Manual
|
 | Infrared Tube ETU Series Heaters
- ECONOMY SERIES- STRAIGHT TUBE HEATER - Complete Field Assembly Required
- Pull-through system for increased radiant efficiency and more uniform tube temperature
- 40 + models to fit your needs
- Direct spark ignition
- Fully calorized aluminized steel tube for 1st 10ft., remainder is hot rolled steel
- COMPLETE field assembly required
- Space-Ray ETU I&O Manual
|
 | Fostoria 2 Element - Lamp Models, Mult-T-Mount Heater
3 LAMP SERIES
STAINLESS STEEL
2 LAMP SERIES
POWDER-COATED BROWN
or
STAINLESS STEEL
• UL / C-UL listed for suspended, totally exposed outdoor, and indoor comfort heating applications, including exterior snow/ice control applications.
• UL / C-UL listed for recessed applications.
• Clear Quartz Lamp heating elements, offered in both 2-Lamp & 3- Lamp heaters that operate on 208, 240, 277, 480, & 600 Volts, for direct wire connection.
• Gold anodized one-piece reflector offered in 30º, 60º, or 90º symmetrical, including 30º & 60º asymmetrical heat patterns for various distribution of infrared heat.
• Feature two different housing materials: 20-gauge Stainless Steel or Galvannealed Steel painted with a high temperature powder coated “brown” finish.
• Built-in surface mounting bracket allows for fixture adjustment up to a 45º horizontal tilt.
• 2-Lamp heaters operate on single-phase operation (consult factory for 3-phase wiring).
• All 3-Lamp heaters operate on either single or three-phase wiring.
• Infrared heating systems heats people and objects to a desired temperature level, creating a safe and clean atmosphere.
• High-intensity radiant infrared heating elements provide the maximum heat output in less than 60-seconds.
• Unit provides the ability of staging and zone control flexibility.
• Three element heaters provide 50% higher watt densities than two element units.
• Highly engineered and proven, our gold anodized aluminum reflectors and end caps provide maximum reflectivity and longevity for a variety of applications.
|
 | Portable Electric Space Heaters
For some environments, electric heaters are the ideal solution. In relatively small enclosures, with ready access to 120 volt, 208-240 volt or 480 volt power, these heaters are quiet and clean. There are no by-products of combustion so Heat Wagon electric heaters are safe for many applications where air quality is of utmost concern.
Electric heaters do not add to relative humidity so they can used to assist dry out applications. Several heaters are ductable up to 50 feet. Most units are UL listed. |
|
Tell your suppliers you found them on ThomasNet
