Fasteners related categories
 | Deck Screws
- 18-8 Stainless Steel.
- Square and Phillips recess.
- 8 x 1 5/8 not available in Phillips drive.
- Type 17 point.
|
 | Clip No. 48-B
Used as standard equipment on ignition test sets, electroplating racks, and condenser testing. Teeth mesh on all three sides of jaw. Copper version has excellent current carrying capacity. 6-32 screw connection on both.- Jaws Open: 5/16 inch (min.)
- Material: Steel
- Finish: Plated
|
 | Clip No. 24-A, 25 Amp.
The popular size for battery operated equipment, chargers and trouble lights. Teeth on one jaw and notch on the other allow it to stand erect. Interlocking necks prevent jaw off-set. Lead-coated copper shunt gives spring complete protection. Packed half marked +, half plain. 8-32 set screw.- Jaws Open: 3/4 inch (min.)
- Material: Steel, Copper Shunt
- Finish: Lead Plated
. |
 | Clip No. 21-A, 50 Amp., Heavy Duty Clip for Battery and Test
Heavy-duty clips for battery and test work. Pin hinge construction gives great mechanical strength. Copper shunt gives complete protection. Copper version equipped with removable copper lug for attachment of cable. Pack half marked +, half plain. 10-32 set screw. |
 | U-Bolts - Unassembled with Nuts
- Carbon steel.
- Zinc plated.
- All sizes manufactured with rolled threads.
- Cut thread available upon request.
- U-bolts available up to 3/4 inch diameter rod.
- Square and V-bend bolts available upon request.
Stainless Steel U-Bolts
- 304 Stainless Steel.
- Furnished with stainless steel hex nuts (unassembled).
- All sizes manufactured with rolled threads.
- Cut threads available upon request.
- Square and V-bend bolts available upon request.
|
 | Constant - Torque Clamps
A revolutionary clamp that reacts to changes in hose systems by actually increasing or decreasing its own diameter as the system expands or contracts. The BREEZE ′′Constant-Torque′′ Clamping System is the answer for any manufacturer experiencing leakage or rupture problems because of ′′cold flow′′ or changes in environmental or operational temperatures. |
 | Liner Clamps for Soft/Silicone Hose
Integral extension of the band as a liner - no rivets or welds. Protects soft-surface hose (silicone and others) from damage caused by extrusion or shearing through the band slots. Breezer liner clamps give the truest concentric seal of any clamp made. |
 | Aero-Seal Marine Grade Clamps - ′′300′′ Series
All parts 300 series stainless steel. High corrosion resistant stainless steel clamps necessary for marine, underground, and other high corrosive applications. 305 Stainless steel screw. |
 | Make-A-Clamp
This is a maintenance ′′clamp system′′ in a box. By simply cutting off a piece of banding from a continuous roll, you can make any size 100% stainless steel worm-drive clamp from 2′′ diameter on up—10-inch or 10-foot diameter, you pick it and you do it in fifteen seconds. It′s a must for anyone who′s likely to encounter requirements for varying sized large clamps Reusable. Superior to and more versatile than ′′crimp/buckle′′ banding and strapping products. |
 | Snap Fastener- Die for Assembling Button
Die for assembling button 7677 with socket 7678. The button sets in the die. Then the material and socket are placed over the button barrel. Tool 7691 is used to swedge over the barrel. 5/8 inch high, 1 3/8 inch diameter. Pkg Qty = 1. |
 | Snap Fastener- Die for Assembling Stud
Die for assembling stud 7679 and eyelet 7682. The eyelet sets in the die. Then the material and stud are placed over the eyelet barrel. Tool 7691 is used to swedge over the barrel. 5/8 inch high, 1 3/8 inch diameter. Pkg Qty = 1. |
 | Aerosmith Fasteners
As used by the market leaders for floor fastening in Trailers Containers, Commercial Vehicles and Industrial uses. For the application of:- Wood to Steel
- Sheet Metal to Steel
- Wood to Concrete
- Steel to Concrete
|
 | LIEBIG Safety Bolt - Type LSN (Nut and Stud)
- The two-coned Safety Bolt guarantees cylindrical expansion and optical installation control via a domed washer.
- Approved for use in the bending/tension, and compression zone.
- Suited for drill-through and drop-in method.
- All anchor bolts are made of HIGH tensile steel - quality A 325 (ASTM). Minimum tensile strength: 116,000 psi.
|
 | Thunder® Stud
- Listed by Underwriters Laboratories (UL), International Conference of Building Officials (ICBO), and Board of Standards and Appeals (BSA).
- Meets or exceeds U.S. Government G.S.A. Specifications: FF-S-325 Group 11, Type 4, Class 1.
- Grades 304, 316 Stainless available upon request.
- Special lengths available upon request.
- For technical information, please call or request a factory catalog.
|
 | Wej-it Anchor Bolts
- Time-tested, proven reliability.
- Bolt size = Hole size.
- Works first time, every time.
- Exclusive ′′Positive Wedge Connection′′.
- Fully assembled and ready to use.
Length Selection Guide
Minimum embedment (A)
+ Material Thickness +(B)
+ 1 1/2 x Bolt Diameter +(C)
= Total length =(D). - For technical information, Please call or request a factory catalog.
|
 | Sleeve Type Anchors
- All steel construction for long lasting performance.
- Use in concrete, block, brick, or stone.
- Pre-assembled anchor is ready to use.
- Removable after use.
- Hex nut, acorn nut, stud bolt, and flat head available.
- No hole spotting.
- No special installation tools required.
- GSA: FF-S-325, Group 2, Type 3, Class 3 .
|
 | Screw Anchors
- Use in concrete, brick, or stone.
- Setting Tool provided free in each box of anchors.
- Fits into irregular holes.
- Available in open bottom only.
- Sleeve expands into irregularities of hole.
- 3/8 - 7/8 inch U.L. Listed Pipe Hangers.
- GSA: FF-S-325, Group 2, Type 2, Class 1.
|
 | Drop-In Anchors
- Used in medium- to heavy-duty applications.
- Used in solid media such as concrete and stone.
- Setting tool provided with each 100 anchors.
- Used in overhead applications.
- Applications include hanging pipe, duct work, machinery, etc.
- Drop-ins are available in 304 stainless steel on special order. Important Note : Due to the exacting nature of the Drop-in′s expansion requirements, the appropriate setting tool must be used for each size and type. Failure to use the correct tool could result in a fastening failure.
- GSA: Spec FF-S-325, Group VIII, Type 1.
- DOT Approvals on file. Utility Approvals on file.
|
 | Lag Screw Expansion Shield
- Use in concrete, mortar, or stone.
- Rustproof.
- Heavy external corrugations assure powerful gripping action.
- GSA: FF-S-325, Group 2, Type 1, Class 1 and 2.
|
 | Double Expansion Shields
- Use in concrete, brick or stone.
- Heavy duty expansion shield.
- Load is distributed full length of side casting for increased holding power.
- GSA: FF-S-325, Group 2, Type 2, Class 2, Style 2.
|
 | Loxin Expansion Shield
- Use in concrete, brick or stone.
- Shield expands as bolt is tightened.
- GSA: FF-S-325, Group 2, Type 2, Class 2, Style 1.
|
 | Selfdrill Shield
- All steel construction for long lasting performances.
- Installed manually or by power hammer.
- With appropriate chuck, drills own hole in concrete, brick or stone.
- Heavy duty.
- Vertical slots for uniform expansion.
- Reduces drilling time and labor.
- GSA: FF-S-325, Group 3, Type 1, Approved I.C.B.O.
|
 | P.D. Concrete Inserts
- For preplanned concrete fastening.
- Rustproof.
- Use with steel or wooden forms
Steel Forms
Star P.D. Concrete Insert can be secured directly to steel form with a standard machine screw or bolt. Machine screw or bolt is easily removed when form is stripped.
Wood Forms
Star P.D. Concrete Insert can be easily secured to wood form with one stronghold nail. P.D. Adapter Plug is easily removed after form is stripped. |
 | Threaded Insert Adapter Plugs
Before using Adapter Plugs, be sure to coat threads and faces of plugs with form oil, wax or other lubricants to prevent binding in concrete. |
 | Conical Plastic Anchors
- For hollow or solid wall, ceiling or floor applications.
- Unique Star formula makes our Plastic Anchor superior in extreme hot or cold environments.
- Quick and easy to use.
- Inexpensive installation.
|
 | Hammer Drive Anchors
- Use in concrete, block, brick or stone.
- No hole spotting.
- Fast and easy to use.
- One piece, pre-assembled construction.
|
 | Hollow Wall Anchors
- Greater holding power than nails or screws in hollow walls.
- Use in wallboard and paneling.
- Nut has more threads than similar anchors of other brands, for superior holding power.
- Securely fasten mirrors, pictures, etc.
- Fixtures can be removed or replaced without disturbing the anchor.
- Available with Hex Washer Slotted Screws for power driven installations.
- GSA: FF-B-588-C, Type III.
|
 | Drive Hollow Wall Anchors
- Use in wallboard, plaster and paneling.
- No pre-drilling required.
- Drives into walls in seconds.
- Saves labor.
- Securely fasten mirrors, pictures, etc.
|
 | Self-Drilling Hollow Wall Anchor (Buildex EZ Ancor)
Scru ′N′ Grip is injection molded of engineered plastic or long lasting Zamak. Its unique, slim design allows the fastener to make a small hole that does not disrupt the consistency of the drywall. The anchor has a tri-cutting drill point that drills a clean hole and prevents paper damage. The deep cutting threads provide strong engagement and resist stripping out. The tapered, oversized head seals the hole with a flush mount. Type Scru ′N′ Grip™ Plastic No. 8. |
 | Spring Wing Toggle Bolts
- Use in hollow walls, hung ceilings, and horizontal surfaces.
- Excellent holding power in hollow walls of all types including concrete block.
- Cast trunion nut has more threads than toggle bolts of other brands, for superior holding power.
- Available in four head styles - round, flat, hex, and mushroom.
|
 | Spring Wing Toggles
- Light duty toggle head for hollow walls, hung ceilings, concrete blocks and horizontal surfaces.
- Ideal for projects around the home.
|
 | Kap Toggles
- The new, hassle-free hollow wall fastener with greater holding power.
- Tested 3 times stronger than ordinary fasteners.
- Screws must be ordered separately.
|
 | Plastic Toggle Screw Anchors
- Fast and easy to use.
- Use screw sizes from No 8 to No 12.
- Always works regardless of wall thickness or material.
- Requires one drill size - 5/16 inch.
Size Range :
Hollow walls of 3/8, 1/2, 5/8 inch thicknesses.
All solid walls.
All shallow walls. |
 | Nylon Anchors (Tap - Its)
- No hole spotting.
- Quick, easy and economical to use.
- Excellent thermal and insulating qualities.
- Resistant to chemicals and fungus.
- Can be used in hollow or solid applications.
- Available in flat and truss heads.
|
 | Camrail® Products
- Large diameter fasteners specified by many railroads for freight car repairs.
- Special CAMKOAT® lubricant preapplied to every part.
|
 | Dual Spaced Thread Fasteners
- Low carbon steel.
- Zinc and clear chromate.
- Phillips Pan Head and Hex Washer Head readily available from factory stock.
- Virtually all types of heads, drives, materials, and finishes are available to meet your specific requirements.
|
|
Tell your suppliers you found them on ThomasNet
