Eldridge Products, Inc. - Monterey, CA
Manufacturer, Custom Manufacturer
Custom manufacturer of flow meters including insertion flow meters with remote & integral electronics. Specifications of insertion flow meters include linear signal out put ranging from 0 VDC to 5 VDC & 4 mA to 20 mA, standard temperature of 70 degrees F, pressure of 29.92 in. Hg, input power ranging from 115 VAC to 230 VAC, electronics temperature ranging from 32 degrees F to 122 degrees F, gas temperature ranging from minus 40 degrees F to plus 392 degrees F, sensor response time of 1 second & flow transmitter power of 5 W. Meets CE, CSA/CUS & ATEX standards.
Brand Names: EPi, Master-Touch
www.epiflow.com

Paragon Controls, Inc. - Santa Rosa, CA
Manufacturer
Designer and manufacturer of flowmeters including air, differential, HVAC, pressure, insertion, multiple measuring point & stainless steel. Flow indicating meters are available for use with sensing elements for process indication where automatic control is not required or where local indication is specified. Features include analog meter, multiple analog meter, surface-mounted steel enclosures & surface-mounted brushed aluminum enclosures. Engineering capabilities can custom design to meet or exceed challenging applications & demanding process conditions. Experience in the biotechnology, chemical, pharmaceutical, petrochemical, power, semiconductor, wastewater treatment and various other light and heavy industrial industries.
www.paragoncontrols.com/IndustrialProcessAp...

Fox Thermal Instruments, Inc. - Marina, CA
Manufacturer, Custom Manufacturer, Service Company
Manufacturer of standard & custom thermal mass flowmeters including in-line & insertion flowmeters. Available with single or two output models. Specifications of thermal mass flowmeters include 24 VDC input power rating & output current ratings from 4 mA to 20 mA. Thermal mass flowmeters are designed for direct mass flow measurement of air/gases & used in harsh & hazardous applications. In-line & insertion flowmeters are CE, CSA® & FM approved.
Brand Names: Fox
www.foxthermalinstruments.com/products/inde...

Insertion Flowmeters Products
	Model FT2 Insertion Mass Flow Meter & Temperature Transmitter Model 10A Insertion Mass Flow Meter

Sierra Instruments - Monterey, CA
Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2008 certified designer & manufacturer of standard & custom insertion ultrasonic flowmeters. Specifications of insertion ultrasonic flowmeters include repeatability +/-0.5% of reading, -40 degrees F to +300 degrees F operating temperature, bi-directional flow range up to 40 ft./second, 90 VAC to 250 VAC & 10 VDC to 36 VDC power supply at 48 Hz to 63 Hz frequency & 1 in. to 200 in. pipe size. Features include high temperature clamp-on transducers, clamp-on sensors, NEMA 4X die cast aluminum transmitters & RS232 or RS485 digital output. CSA certified. Meets ANSI/NEMA 250 & ANSI/IEC 60529 standards. FM & CRN approved. RoHS compliant. One year warranty.
Brand Names: InnovaSonic, Sierra
www.sierrainstruments.com/products/205INSPr...

Cannon Water Technology, Inc. - Granite Bay, CA
Distributor, Service Company
Distributor of insertion flowmeters including paddlewheel & turbine insertion flow sensors & magmeters. Specifications of magmeters include 9.84 in. L x 7.4 in. H x 0.625 in. T to 17.72 in. L x 10.4 in. H x 0.688 in. T dimension, 4 in., 6 in., 8 in. & 10 in. pipe size, 150 psi working pressure, 10 degrees F to 130 degrees F temperature, plus /-1 percent & plus /-2 percent accuracy, 12 VDC to 24 VDC, 30 mA power supply, 24 VDC, 10 mA output signal, 12 gpm to 1,800 gpm flow rate & 23 lbs. to 70 lbs. weight. Flow sensors fit to pipe sizes ranging from 2 in. to 48 in. & are available with isolation valves, bearings, NPT threaded pipe fittings & saddles. Flow sensors & magmeters are suitable for industrial water & wastewater utilities, well usage reporting & cooling tower water treatment applications.
Brand Names: SeaMetrics
cannonwater.com/Products/seametrics1.html

Steven Engineering - South San Francisco, CA
Distributor, Custom Manufacturer
Distributor of insertion flowmeters including ultrasonic flowmeters. Flowmeters are available in voltage supply ranging from 7.5 VDC to 26 VDC & operating temperature ranging from minus 10 degrees C to plus 85 degrees C. Features include no moving parts, automatic viscosity & temperature compensation, fluid contaminants resistance, low pressure drop & push fit connection options. Capabilities include bar coding, engraving, enclosure cutting & punching, enclosure modification, labeling, meter configuration, prototyping, rail assembling, rail cutting & notching, terminal block marking & wire cutting, vendor managed inventory, EDI, designing, bin stocking & engineering. Same day shipment & JIT delivery are also available.
Brand Names: DIGMESA, E-T-A

Sage Metering, Inc. - Monterey, CA
Manufacturer
Manufacturer of thermal gas mass insertion & in-line flowmeters. Thermal gas mass flowmeters are available in integral/remote configurations, 0.2% repeatability, +/-5% accuracy of full scale & +/- 1% of reading with turn-down of 100 to 1. Thermal gas mass flowmeters feature temperature compensation & & display showing mass flow rate/total flow rate/temperature. Applications include industrial plants, building automation, municipal, petrochemicals, coal mines, boilers & furnaces. Thermal gas mass flowmeters are available with 1-year limited warranty from the date of delivery.
Brand Names: Sage