ThomasNet.com

Differential Pressure Transducers in Northern California

Home > Supplier - Product/Service Results: Differential Pressure Transducers




Provide Feedback

Differential Pressure Transducers Suppliers serving Northern California

Displaying 1 to 7 out of 7 results
to Compare Suppliers Serving
Northern California
Located in
Northern California
Wilmington Instrument Co. - Wilmington, CA
Distributor, Custom Manufacturer
ISO 9001:2000 & ISO 17025:2005 certified distributor of differential pressure transducers. Transducers are available in various models & configurations. Specifications include 0.2 psi to 150 psi operating pressure, 300 psig static pressure, 4 mA to 20 mA current supply, -40 degrees F to plus 176 degrees F operating temperature, less than 100 megohms insulation resistance at 50 VDC voltage, -15 percent to 100 percent zero offset adjustment, 1 kilo-ohms load impedance, 10 millisecond to 2 seconds response time & plus /- 0.001 percent FS/V supply sensibility. Features include anodized aluminum housings, wetted parts & spring type terminal block under plates, 1/8 in. NPT female pressure connections & purge ports.
Brand Names: GE Security Industrial
Product Catalog
Tavis Corp. - Mariposa, CA
Manufacturer, Service Company
AS9100B & ISO 9001:2000 certified custom manufacturer of differential or absolute pressure transducers with stainless steel welded construction & stable electronic package for tough environments. General specifications include pressure ranges from 0 to 1 through 0 to 10,000 psi, proof pressure of 20 psi to 10,000 psi maximum, 6 oz. to 3 lbs. weight, variable reluctance sensor type & liquids or gases compatible with 410 SS, 17-4PH SS & Inconel.
Paragon Controls, Inc. - Santa Rosa, CA
Manufacturer
Manufacturer of differential pressure transducers & transmitters including high & low pressure, loop powered & analog. Capabilities include ultra low pressure sensing, deflection capacitance of 4-20 mA output signal, 0-5 or 0-10 VDC output. Features include +/- 1% F.S. accuracy, can be stored in temperature ranges of -40 to 180 degrees F, 25 psi maximum static line pressure, differential overpressure of 5 psi proof & 25 psi burst. Serving the biotechnology, commercial ventilation, laboratory research, hospital, pharmaceutical, power, semiconductor, waste water treatment and various other light & heavy industrial industries.
Siemens Corp. - Locations
Manufacturer, Custom Manufacturer, Manufacturers' Rep, Service Company
Worldwide manufacturer of digital pressure transducers including absolute & differential pressure transducers. Pressure transducers are available with a pressure range from 0 psi to 5 psi, 0 psi to 15 psi, 0 psi to 30 psi, 0 psi to 75 psi, 0 psi to 150 psi & 0 psi to 200 psi, non-interactive coarse & fine span & offset & spannable down to 15% of element range. Features transient & environmentally protected electronics. Pressure transducers are used for sensing changes in pressure in closed piping systems or changes in water level in open sumps or tanks.
All Sensors Corp. - Morgan Hill, CA
Manufacturer, Custom Manufacturer
Custom manufacturer of differential pressure transducers. Transducers available in low & medium configurations, pressure capacities from minus .3 psi to 100 psi, digital output sensors, millivolt output sensors & offset compensated pressure sensors. Specifications include supply voltage ranging from 4.5 V to 5.5 V, burst pressure ranging from 10 psi to 150 psi, operating temperature ranging from minus 25 degrees C to 105 degrees C, humidity limits from 0 percent RH to 95 percent RH, quiescent current is 7.5 mA, lead soldering temperature is 250 degrees, common mode pressure ranging from minus 10 psig to 10 psig & storage temperature ranges from minus 40 degrees C to 125 degrees C. RoHS compliant products available on request.
Differential Pressure Transducers Product Catalog:
0.25 Inch to 0.5 Inch H2O
BLV Series Low Voltage Pressure Sensors
BLVR Series Low Voltage Pressure Sensors
Steven Engineering - South San Francisco, CA
Distributor, Custom Manufacturer
Distributor of transducers including differential pressure tranducers made from stainless steel. Specifications of transducers include 0 psi to 20,000 psi pressure, 100 ohms to 200 ohms input impedience, 90 ohms to 140 ohms output impedience, 1,000 megohms insulation resistance & minus 54 degrees C to plus 149 degrees C operating temperature. Transducers are suitable for hydraulic servo valves, respirators, kidney dialysis machines, fire fighting equipment, diesel generators & transit vehicle braking systems.
Brand Names: Data Instruments, Newport Electronics, SSAC, Turck, United Electric Controls
Silicon Microstructures, Inc - Milpitas, CA
Manufacturer, Custom Manufacturer
Manufacturer of transducers including absolute pressure, differential pressure, liquid level, pressure & strain gage transducers.
to Compare Suppliers
Counties being served: LOS ANGELES
Back to top
© 2012 Thomas Publishing Company. All rights reserved. See Terms and Conditions or Privacy Statement. Website Last Modified June 2, 2012.
print screen
Sign Up | Log In | Product News | Promote Your Business