Gearmotors Suppliers

Displaying 1 to 25 out of 28 results

Manufacturer, Custom Manufacturer
Custom manufacturer of AC & DC gearmotors available in right angle & parallel shaft designs. Gearmotors are also available in various models, torques & mounting configurations. Applications include conveyors, medical & laboratory equipment, packaging machinery, printing presses, commercial broiling ovens & machine tools.
Brand Names: Baldor
www.baldor.com/products/gear_products.asp

Gearmotors Products
	AC Gearmotors DC Gearmotors

Hansen Motors - Princeton, IN

Manufacturer, Custom Manufacturer
ISO 9001 & ISO 14001 certified. Manufacturer of synchronized, DC & stepper motors. Permanent magnet DC gearmotors are available in five different configurations with a wide variety of gear ratios ranging from 1.3:1 to 6,912,000:1. Rated torque values range from 26 oz-in to 205 oz-in. Motors can be fitted with either 1 way or 2 way slip clutches & can be reversed by changing the polarity of the motor.
Brand Names: Hansen
www.hansen-motor.com/electric-motors.php

Gearmotors Products
	AC Synchronous Motors - Geared Hysteresis Round 2-Hole AC Synchronous Motors - Geared Hysteresis Round 4-Hole AC Motors - Geared Hysteresis Pear Shallow More

Rae Corp. - Mchenry, IL

Manufacturer, Custom Manufacturer
Manufacturer of custom & precision DC gearmotors or variable speed reducers. Types of motors include right angle, parallel shaft & planetary gearmotors. Right angle gearmotors are available with continuous duty torque up to 95 in. lbs. Parallel shaft gearmotors are available in two, three, four & five stages with ratings up to 100 in. lbs., speeds up to 250 rpm, 8 in. leads, ratios between 16:1 & 2474:1 & 0.500 in. shaft dia. Continuous duty planetary gearmotors are available with ratings up to 300 in. lbs., speeds up to 400 rpm, 5:1 to 125:1 ratio, ceramic magnets & 0.750 in. shaft dia. CSA certified. UL listed.
products.raemotors.com/category/gearmotors?...

Gearmotors Products
	Right Angle Gearmotors - G4 Series Right Angle Gearmotors - G6 Series Right Angle Gearmotors - G7 Series More

Motion Systems Corp. - Eatontown, NJ

Manufacturer
Manufacturer of FHP gearmotors, electromechanical linear actuators & epicyclic ball screws. Designers of special electromechanical drives. Loads 100, 500, 1000, 1500, stock strokes: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 15, 18, 24, stroke speeds: .14 To 11.00 in./sec. Stock motors: 115 VAC, 220 VAC, 60Hz, 50Hz, 12 VDC, 24 VDC, 115 VDC (1.6, 2.5, 3.0, 3.3 inches dia.) features motion epicyclic ball screw, freewheels at each end of stroke without limit switches, low noise, bi-directional brake, wide range of mountings, special strokes, special designs, weatherproof, full technical support available.
www.motionsystems.com/85150.php

IPTS, Inc. - Riviera Beach, FL

Manufacturer, Custom Manufacturer
Manufacturer of gearmotors including capacitor, commutator type, constant speed, drip proof, electric & fan-cooled motors used in the transmission of power.
www.iptsinc.com/index.html

The Rowland Co. - Philadelphia, PA

Distributor, Custom Manufacturer, Service Company
Veteran-owned & HUBZone certified distributor & custom manufacturer of gearmotors. Types of gearmotors include right angle gearmotors & parallel gearmotors. Capabilities include engineering, fabrication, rebuilding, repair & component assembly.
www.rowland2.com/products/gear.htm

PennEngineering - Danboro, PA

Manufacturer, Custom Manufacturer
ISO 9001:2008 & AS 9100 Rev C certified manufacturer of standard & custom fasteners. Self-clinching fasteners, broaching fasteners, flaring fasteners, surface mount fasteners, panel fasteners, weld fasteners, blind threaded rivets, inserts, quick release pins, small screw installation systems & automatic & manual fastener installation presses are available. Types of inserts include press-in, molded-in & heat/ultrasonic inserts. Sheet metal nuts, studs & pins, standoffs, captive panel screws, cable tie mounts/hooks, swaging collar studs, spinning clinch bolts & weld nuts are available. Capabilities include 3D modeling, engineering, prototyping/short run production & testing. Automotive Industry Action Group (AIAG) & International Material Data System (IMDS) affiliated. Class 2 & Class 3 fasteners are QSLM approved. Fasteners are RoHS compliant. Fasteners meet REACH standards.

Dometrics, Inc. - Franklin, NC

Distributor
Distributor of power transmissions including gearmotors, metric gear drives & speed reducers for mining, metallurgy, energy, pulp & paper industries. Drives are available with 9 strokes/minute or 16 strokes/minute & 15,000 N pushing force. Drives have flexible coupling between motor & gear unit, gray cast iron housings, sliding shaft bearings & are permanently lubricated with synthetic grease.
Brand Names: Cumel, Kumera
www.dometrics.com/kumera.htm

Brookfield Industries, Inc. - Thomaston, CT

Distributor, Manufacturer, Custom Manufacturer
Distributor of replacement component parts including gear motors. Available in operating current up to 1/ 8 hp. Markets served include architectural, chemical, nuclear, construction, detention, radiation shielding, acoustic, EMI/RF shielding, U.S. Government & aerospace.
Brand Names: Bodine
catalog.brookfieldindustries.com/item/all-c...

Horner Industrial Group - Indianapolis, IN

Distributor, Manufacturer, Custom Manufacturer, Service Company
Distributor gear boxes, motors, drives, machining, alignment, coupling, gear case repair, fabrication, motor clutch gear, gear pumps, high torque, crusher & mechanical gear boxes, worm gear speed reducers, mechanical inspection, motor repair, machining, refurbishment, gearbox overhaul.
hornerindustrial.rtrk.com/?scid=1980827&rl_...

Koffler Electrical Mechanical Apparatus Repair, Inc. - San Leandro, CA

Distributor, Manufacturer, Custom Manufacturer, Service Company
Woman-owned distributor of gearmotors available in various models & configurations. Types of gearmotors include right angle worm drive, spiral bevel & inline & compound planetary gearmotors.
Brand Names: Stainless Motors
catalog.koffler.com/category/gearmotors?

Gearmotors Products
	Gearmotors

Dalton Gear Co. - Minneapolis, MN

Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer of gearmotors including worm gear reducers with gray iron case, shafts & bearings. Gear reducers are available in various models with specifications including 25 rpm to 1750 rpm input speed, 0.08 hp to 7.46 hp input motors, 810 in.lbs. to 14,183 in.lbs. output torque, 2 rpm to 218.7 rpm output speed & 22 lbs. to 65 lbs. approximate weight. Reducers rotate in clockwise or counter-clockwise directions.
www.daltongear.com/

Arc Systems, Inc. - Hauppauge, NY

Manufacturer, Custom Manufacturer
An ISO 9001:2008 certified designer & manufacturer of fractional horsepower gear motors for applications including marine, medical, paper industry, telecommunication & geological instrumentation.
acmotors.arcsystemsinc.com/item/all-categor...

Arnquist Packaging Corp. - Willowbrook, IL

Distributor, Service Company
Stocking distributor of replacement parts including blower, tunnel & gear motors. Fuses, capacitors, pilot lights, fuse holders, power cords, switches, buzzers, switch circuit breakers, circuit boards, transformers, controllers, plugs, contactors, connectors, solid state relays & assemblies are also available.
catalog.arnquistpackaging.com/category/all-...

Fife-Pearce Electric Co. - Detroit, MI

Distributor, Service Company
Distributor of AC & DC right angle, worm, helical bevel, planetary, spiroplan, in-line & offset parallel gearmotors, brushless DC & AC design, servo gearmotors, planetary Gearmotors, torque ranges from ounce inches to 500,000 inch pounds, speed ranges from 1/4 to 1300 RPM, single & 3 phase, application & design assistance available as well as service & parts.
Brand Names: Baldor, Bodine, SEW Eurodirve, Zero-Max
products.fifepearce.com/category/eurodrive-...

Gearmotors Products
	42R-E Series Parallel Shaft AC Gear motors 34R-5R and 42R-5L Series Right Angle AC Gearmotors 33A-E and 33A-F Series Parallel Shaft DC Gearmotors More

Inventive Systems, Inc. - Lexington Park, MD

Manufacturer
Design & manufacturer of spare parts for oil-in-water alarms & monitors. Spare parts available include switch assemblies, drive pipe couplings, gearmotors, pawls, printed circuit cards, drive wheel assemblies & reed switches.
oilalarm.oilinwater.org/viewitems/oil-in-wa...

Cadence Supply Company - Homewood, IL

Distributor, Manufacturer, Custom Manufacturer
Industrial product distribution company offering an array of industrial products for all of customer's MRO requirements. Serving multiple markets including manufacturing; new product prototyping & design, food processing, packaging, oil, gas & alternative energy, aerospace & medical.

Gearmotors Products
	Electric Motors

Bodine Electric Company - Northfield, IL

Manufacturer, Custom Manufacturer
Manufacturer of power transmission equipment & fractional horsepower industrial electric motor & gearmotor products. Includes AC & DC motors, brushless DC motors, right angle & parallel designs, gearmotors, electronic motion control systems & direct drive servomotors. Designed for long life & quiet operation.
www.bodine-electric.com/Asp/ProductMenu.asp

Gearmotors Products
	24A-D Series Parallel Shaft DC Gearmotor 24A-Z Series Parallel Shaft DC Gearmotor 33A-Z Series Parallel Shaft DC Gearmotor More

Merkle-Korff Industries, Inc., A Kinetek Co. - Elk Grove Village, IL

Manufacturer, Custom Manufacturer
ISO 9001:2008 certified custom manufacturer of AC & DC gearmotors. Types of gearmotors include brushless, in-line, parallel shaft & sub-fractional gearmotors.
merklekorff.thomasnet.com/category/all-cate...

Gearmotors Products
	AC Gearmotors DC Gearmotors

U.S. Tsubaki, Inc. - Wheeling, IL

Distributor, Manufacturer
ISO 9001:2008 & ISO 14000 certified manufacturer & distributor of gearmotors. Types of gearmotors include standard motorized gearmotors, hypoid motorized gearmotors, adapter type gearmotors & inline reducer type gearmotors. Available in foot mount, face mount & hollow shaft styles.
Brand Names: Emerson
www.ustsubaki.com/gear-motors.html

Hydraulic Controls, Inc. - Stockton, CA

Distributor, Service Company
Distributor of motors including dual rotation gearmotors with outboard bearings. Specifications include 1.48 cu. in., 1.97 cu. in. & 2.46 cu. in. displacement, 7/8 in. & 1 in. shaft dia., 2,000 psi & 2,250 psi maximum pressure & 2,000 rpm speed.
catalog.hydraulic-controls.com/viewitems/ge...

Gearmotors Products
	Gear Motors

Oriental Motor U.S.A. Corp. - Torrance, CA

Distributor, Manufacturer, Custom Manufacturer
ISO 9000, ISO 9001, ISO 14000 & ISO 14001 certified manufacturer & distributor of precision & low noise gear motors including synchronous motors, induction motors, electromagnetic braking motors, reversible motors, torque motors, watertight & dust-resistant motors, right angle gear heads & clutch & brake motors. Available in frame sizes from 1.65 in. sq. to 4.08 in. sq. & output power up to 200 w. Applications include conveyor systems, water transfer, fluid injection, material agitation, pressing, feeding, positioning, cleaning, printing media, picking, pumping, ventilating, heat sinking, cooling & vapor removal
www.orientalmotor.com/products/ac-motors/in...

Gearmotors Products
	World K Series Induction Motors BH Series Induction Motors V Series Induction Motors More

Lifco Hydraulics, Inc. - St Catharines, ON

Distributor, Custom Manufacturer
Distributor of gear motors including 2-speed gear motors. Gear motors are available with features including maximum pressure to 2500 psi, maximum speed to 2000 rpm, bi-directional rotation & aluminum construction.
Brand Names: Tyrone
www.lifcohydraulics-usa.com/hub-city-gearmo...

Gearmotors Products
	Parker Series 16 Pumps and Motors Parker Series 20 Pumps and Motors Parker Series 25 Pumps and Motors More

NMB Technologies Corporation - Chatsworth, CA

Manufacturer
Manufacturer of brushless DC gearmotors. Turn-key solutions include local design and development, enclosure designing, validation and compliance testing. Industries served include personal computing, networking, telecommunications, home entertainment and electronics, automotive, aerospace, appliance, medical and industrial. RoHS compliant.
Brand Names: NMB
www.nmbtc.com/motors/faqs.html

Wolters Motors & Drives - Duluth, GA

Distributor
Distributor of motor control products including DC gearmotors. Available in materials including stainless steel, cast iron & aluminum. Applications include marine, food products, robotics, health care, material handling & pharmaceuticals.
www.woltersmotors.com/parts_accessories.htm...

Narrow Your Search

Expand Your Search

Gearmotors Suppliers