ThomasNet.com
Home > Supplier Discovery > Supplier Results for Motor Drivers

Provide Feedback

Motor Drivers Suppliers

Displaying 1 to 9 out of 9 results
to Compare Suppliers or Email
Oriental Motor U.S.A. Corp. - Torrance, CA Browse our catalog of productsCAD Drawings
Distributor, Manufacturer, Custom Manufacturer
ISO 9000, ISO 9001, ISO 14000 & ISO 14001 certified manufacturer & distributor of motor drivers such as stepping motor drivers. Types include 2-phase, 5-phase microstep & 5-phase full & half step drivers. Specifications include power supply up to 24 Vdc, microstep, half & full excitation mode. Stepping motor drivers are RoHS compliant & meet ULŽ, CE, CSAŽ & EN standards. JIT delivery available. Products are available with 2 years warranty.
Brand Names: Vexta
www.orientalmotor.com/products/stepper-moto...
Autonics USA - Mundelein, IL Browse our catalog of products
Manufacturer
ISO 9001 certified manufacturer of stepping motor drivers. Types include 5-phase stepping motor drivers & 2-phase stepping motor drivers. 5-phase stepping motor drivers range in drive current from 1.4 A to 2.8 A, ambient temperatures from 0 degrees C to 40 degrees C, pulse frequencies of 280 kpps & high pulse input voltages from 4 VDC to 8 VDC. 2-phace stepping motor driver specifications include 20 VDC to 35 VDC power supply & 105 mm x 38 mm x 74 mm dimensions.
products.autonicsonline.com/category/driver...
Optimal Engineering Systems, Inc. - Van Nuys, CA
Manufacturer
Manufacturer of stepping motor drivers. Stepping motor drivers allow implementing intelligent stepping motor control. Other features if stepping motor drivers include 0.3 to 7 A phase current, 10 microsteps per step, mid-band resonance compensation, low-speed resonance nulling trimpots, auto current reduction, 200 KHz max step rate, LED power indicator, modular 2-piece main connectors, & size dimensions of 2.5 in. (63 mm) X 2.5 in. (63 mm) X (21 mm).
Nippon Pulse America, Inc. - Radford, VA
Distributor, Manufacturer, Custom Manufacturer
Manufacturer of stepper motor drives, motor drivers, indexing drives & stepping motor drives. Drivers are hybrid IC's with built in driver bridge & chopper current control functions. Drivers designed for unipolar stepper motors. The chips have full step or half step modes of excitation supported. Clock sequenced inputs are required. Board level stepper motor drivers are constant current type drivers for stepper motors. Operation with opto-isolated inputs & either bipolar or unipolar chopper versions available.
Source Engineering Inc. - Santa Clara, CA
Manufacturer, Custom Manufacturer
ISO 9001:2000 & QS 9000 certified manufacturer of standard & custom hybrid stepping or microstepping motors & drives. Hybrid motors have step angle accuracy of plus or minus 5 percent, resistance accuracy of plus or minus 10 percent & inductance accuracy of plus or minus 20 percent, temperature rise of maximum 80 degrees C with ambient temperature of minus 10 degrees C to plus 50 degrees C. Motors also have shaft radial play of maximum 0.06 mm & shaft axial play of maximum 0.08 mm & insulation resistance of 100 mega ohm at 500 VDC. Motors can be customized with special length, windings bearings & threads, flat or pinion, keyway or length shaft with lead wire in color, type or length & connector installation. UL, CE & CSA approved.
Texas Instruments Incorporated - Dallas, TX
Manufacturer, Custom Manufacturer
Manufacturer Of Semiconductors
RMS Technologies Inc. - Carson City, NV
Manufacturer
Manufacturer of step motor drivers.
New Scale Technologies, Inc. - Victor, NY
Manufacturer, Service Company
Custom manufacturer of motor drivers. Specifications of motor drivers include 2.8 VDC to 5.5 VDC supply voltage, minus 40 degrees C to plus 85 degrees C ambient temperature, 25 mA output current, 85 percent non-condensing humidity & 70 percent efficiency. Motor drivers are available with 4X output.
Brand Names: Squiggle
LIN Engineering - Morgan Hill, CA
Manufacturer, Custom Manufacturer
ISO 9001 & Six Sigma certified custom manufacturer of motor drivers. Specifications of motor drivers include 12 VDC to 48 VDC input voltage, 0.3 A to 3.0 A drive current, 2.5 GHz maximum step frequency, 2x to 256x microstepping capabilities, 12.14 cm overall length, 2.2 lbs. weight, 2.6 oz./sq.in. inertia & up to 294 oz./in. holding torque. Motor drivers are available with optical sensor, switch push button, DB-15 connector cable, opto phototransistor, RS 485 to RS 232 converter card, four user configurable digital I/O & programmable ramp & speed. RoHS compliant.
to Compare Suppliers or Email
Feedback

Copyright© 2014 Thomas Publishing Company. All Rights Reserved. See Terms and Conditions or Privacy Statement. Website Last Modified September 2, 2014.

Thomas Register® and Thomas Regional® are part of ThomasNet.com.

ThomasNet Is A Registered Trademark Of Thomas Publishing Company.

print screen