Wastewater Treatment Equipment Suppliers

Siemens Industry, Inc., Water Technologies - Warrendale, PA
Distributor, Manufacturer, Custom Manufacturer, Service Company
ISO 13485:2003, ISO 14001:1996, ISO 9000:2000, ISO 9001:2008
Manufacturer and distributor of wastewater purification equipment and systems. Products and applications include alkaline cleaner recovery, biological wastewater treatment systems, chemical feed and control, disinfection, hazardous waste treatment, industrial wastewater pretreatment, oil water separation, secondary wastewater treatment, tertiary wastewater treatment, water quality analyzers and process control, Archimedes/screw pumping, BOD and COD reduction, clarification and sedimentation, dissolved metals removal, hexavalent chrome removal, nutrient removal, primary wastewater treatment, spent caustic treatment and TOC reduction.
www.water.siemens.com/en/applications/waste...

Aerzen USA Turbo Division - Coatesville, PA
Manufacturer
ISO 9001:2008
Manufacturer of centrifugal, turbo blowers operating up to 600 HP, 11,000 cfm, 22 PSIG. Single-stage, high-speed, radial turbo blowers are designed to meet varying flow & pressure requirements in many different processes. Primary application is waste water treatment with volume flow control in conjunction with a dissolved oxygen (DO) probe. Turbo blowers are frequency controlled, gearless driven machines with lubricant-free aerodynamic bearings. Compact, factory tested, & ready- to-install units. High frequency permanent magnet motor specifically designed for high frequency applications; it steadily maintains its high efficiency over a wide range of operating speeds & loads. The turbo blower shaft rests on air foil bearings & the high frequency drive concept does not make use of any speed increasing gears. There is no need for oil lubrication, therefore no risk of leakage or disposal problems.
www.aerzenusa.com/Products/Turbo-Blowers

Severn Trent Services - Fort Washington, PA
Distributor, Manufacturer, Service Company
ISO 14001:2004, ISO 9001:2008, ISO/IEC 17025:2005
ISO 9001 & ISO 14001 certified manufacturer & distributor of wastewater treatment & disposal equipment & systems for plating & industrial plants including water treatment filters, stormwater treatment systems & arsenic removal water treatment systems. Types of filters include biological filters, under drain clean water filters, ion-exchange systems, iron & manganese filters & membrane filters. Types of stormwater treatment systems include non-drinking water treatment systems, residual analyzers, liquid feed systems, biological filters, wastewater treatment systems, water & wastewater analyzers & tertiary treatment systems. Arsenic removal water treatment system features dry filtering media, continuous operation, low residual effluents, re-pumping not required, no moving parts & small footprint.
Brand Names: Amphidrome, Capital Controls, Captrol, DeepBed, Filtopacks
www.severntrentservices.com/Water_Treatment...

Noren Products, Inc. - Menlo Park, CA
Manufacturer, Custom Manufacturer, Service Company
GSA Approved, ISO 9001:2008, Woman Owned
Custom manufacturer of aluminum & copper heat pipe heat exchangers & assemblies for use in wastewater threatment applications. Heat exchanger pipes are constructed of a sealed aluminum or copper container with capillary wicking material inner surfaces & are available in a variety of sizes & shapes. Constant temperature heat exchanger pipe maintains a constant temperature or temperature range & diode heat exchanger pipe allows heat transfer in only 1 direction. Flat heat exchanger pipes are available for cooling printed circuit boards or for heat leveling. Flexible heat exchanger pipes are available when some range of motion is required. Applications also include cooling of power modules & TO-3 transistors in sealed enclosures.
Brand Names: AcoustiLock
www.norenproducts.com

Precision Finishing, Inc. - Locations
Distributor, Manufacturer, Service Company
ISO 9000, ISO 9001:2008
Manufacturer of waste treatment systems for heavy metal removal, closed loop recycling & zero discharge of effluent from mass finishing processes including vibratory finishing, tumbling, disc, high energy, drag & spindle finishing. These systems meet EPA regulations while eliminating expensive treatment chemicals. They produce high quality recycling water suitable for reuse in most processes. System types from complete treatment for down-the-drain disposal to recycling of water for reuse. Standard features include wide channel membrane design which can be mechanically or chemically cleaned, high temperature & low pump pressure cutoff, integral cleaning tank, abrasive resistant double mechanical flushed pump seal. Optional features include process & equalization tanks with 45 degrees cone bottom for ease of sludge removal, pH control systems, permeate reuse systems & expandable designs for future growth.
www.precisionfinishinginc.com/products_wast...

CRW Finishing, Inc. - Addison, IL
Distributor, Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2008
ISO 9001:2008 certified distributor of wastewater treatment equipment. Manual wastewater treatment systems, automatic wastewater treatment systems, semi-automatic wastewater treatment systems & wastewater recirculation systems are available. Capabilities include vibratory deburring, high energy/harperized finishing, tumble blasting, centrifugal finishing & aqueous washing.
Brand Names: Ringwood Environmental
www.crwfinishing.com/waste-water-treatment-...

F.W. Webb Co. - Locations
Distributor, Custom Manufacturer
GSA Approved, ISO 9002
ISO 9002 certified distributor of water softening & purifying equipment, water filtration & purification systems & wastewater treatment equipment.
webbconnect4.fwwebb.com/HomePage.html

Ryan Herco Flow Solutions - Locations
Distributor
ISO 9001:2000
Worldwide distributor of wastewater treatment equipment & systems for industrial plants. Markets served include water, health, electronics, chemicals & waste. ISO 9000 compliant.
Brand Names: Contain-It, Duo-Pro, Spears
www.rhfs.com/

Gems Sensors & Controls - Plainville, CT
Manufacturer, Custom Manufacturer
ISO 13485:2003, ISO 9000, ISO 9001:2008, Lean Manufacturing, Six Sigma
Six Sigma, ISO 9001 & ISO 13485 certified. Manufacturer of standard & custom water & wastewater treatment equipment including control systems or controls. Water level & flow sensors, pressure switches & transducers are also available. Same day shipping. Kan Ban delivery. One year warranty.
Brand Names: Gems
www.gemssensors.com/Markets/Water

Georg Fischer Piping Systems - Tustin, CA
Manufacturer
ISO 14001, ISO 14001:2004, ISO 9001, ISO 9001:2008
Six sigma capable ISO 9001 & ISO 14001 certified manufacturer & distributor of standard & custom water & wastewater treatment systems including water park water filtration systems, equipment & features. Products such as fluid handling engineered piping systems, valves & actuation, joining technology, flow monitoring & process control instrumentation are available. Capabilities include CAD design, mechanical engineering support, space planning & system layout, R&D & testing, welding, CNC machining, parts programming & dry ' machining.
www.us.piping.georgefischer.com/go/868686C5...

Ashcroft, Inc. - Stratford, CT
Manufacturer
ISO 14001:2004, ISO 9001:2008, RoHS Compliant
All-welded diaphragm seal instrument isolators, companion series of severe service instrumentation, stop leaks of fugitive emissions, & resist pulsations in severe environments.
www.ge-energy.com/products_and_services/pro...

Gallagher Corp. - Gurnee, IL
Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2008
ISO 9001:2008 certified custom manufacturer of rubber & plastic products. Various products include pads, balls, bars, belting, belts, blocks, boards, bumpers, bushings, casters, gaskets, liners, linings, mounts, rings, pads, plates, rings, rods, rollers, sheeting, sheets, springs, straps, tires, tubes & wheels. Finished parts range in size from a tenth of an ounce to 2,000 lbs. & greater. Processes include liquid casting & compression, transfer, insert & injection molding methods. Capabilities include machining, grinding, shearing, die cutting, waterjet cutting, laser engraving, milling, turning, molding & engineering. OSHA compliant. On-time delivery. Made in USA.

FLSmidth (F.L.Smidth) - Bethlehem, PA
Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2000, ISO 9001:2008
Custom manufacturer of wastewater treatment equipment including closed loop radiator type cooling systems. Features include drainpipes, motor driven water pumps, water coolers, expansion tanks, compressors, water flow switches & plug type valves. Cooling systems are suitable for supplying hard & dirty water in compressors.
Brand Names: Fuller, Modu-Dense
catalog.conveyorspneumatic.com/item/compres...

AGSCO Corporation - Locations
Distributor, Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2008, RoHS Compliant
ISO 9001:2008 certified manufacturer & distributor of wastewater treatment equipment & compounds used in finishing industry. Wastewater treatment equipment designed to clean, polish, degrease & help with corrosion protection. Fits compounds for use in specific mass finishing or parts washing environment.
Brand Names: Armex, Starblast
catalog.agsco.com/

Yates Industries - Locations
Distributor, Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2008
ISO 9001:2008 certified manufacturer & distributor of standard & custom waste water treatment equipment. Products include head/caps, cylinder barrels, rod cartridges, pistons, piston rods, tie rods, cushions, tube end seals, ports, rod seals, piston seals, rod wipers & cylinders. Capabilities include multiple boring billing, CNC machining, lathe, plastic injection molding & arm drilling. Industries served include steel mills, foundry, waste water treatment plants, water municipalities, transportation, amusement parks, railroads, mining, offshore oil processing & food & drug. Mounting style meets NFPA standards.
www.yatesind.com

Vertex Fab & Design LLC - Middleboro, MA
Custom Manufacturer
ISO 9001:2000
ISO 9001:2008 certified custom manufacturer of vacuum chambers, pressure vessels & fabricated structural products. Vacuum chambers for many industries including: semiconductor, solar, thin film, and thermal furnaces. Structural products such as smoke stacks, transitions, cones, bins, hoppers, caissons, platforms, stairs, ladders & stringers are fabricated. Capabilities include fabrication, forming, rolling, polishing, passivating & welding. Meet ASME Sec VIII, Division 1 (U, R & S), ABS & CARC paint standards.

Red Valve Co./Tideflex Technologies - Carnegie, PA
Manufacturer
ISO 9001:2008
Manufacturer of waste treatment & disposal equipment, waste water treatment equipment, pollution control equipment, & water treatment equipment. Products include air operated pinch valves, manual pinch valves, control pinch valves, large dia. valves, & knife gate valves. Also available are pressure sensors, expansion joints, & aeration systems such as coarse bubble & fine bubble aeration systems, & high pressure sparging nozzles. Applications include abrasive & corrosive installations, & slurries.
www.redvalve.com/rv/index.php?/content/sect...

Devar, Inc. - Bridgeport, CT
Manufacturer
ISO 9001:2008
ISO 9001:2000 certified manufacturer of wastewater treatment equipment including lift station control systems. Specifications of control systems include input current ranging from 4 mA to 20 mA, SPDT relay outputs up to 10 A, power ratings up to 115 VAC or 24 VDC & panel housing. Control systems feature duplex alternating pump controls, submersible pressure level transmitters, H.O.A. switches, watertight enclosures, pump controllers & AC power cables. Lift station control systems are UL® & CSA® approved & are available with 2-year warranty. Made in the USA.
www.devarinc.com/implementation-digital-roo...

Tuthill Vacuum & Blower Systems - Springfield, MO
Manufacturer, Service Company
ISO 9001:2000
Manufacturer of liquid ring compressors for water pollution control, wastewater treatment & disposal equipment. Features includes cool gas discharge, low maintenance, close coupled design for easy installation, increased water handling capability, flows to 5 - 90 CFM & pressure levels to 20 PSIG. Applications include wastewater aeration, air sparging, filter flushing, sewage ejection & gas digester compression. ISO 9001:2000 registered.
Brand Names: Atlantic Fluids, M-D Pneumatics, Pneumax, Qube
tuthill.rtrk.com/?scid=1083168&rl_alt=http%...

The Stutz Co. - Chicago, IL
Distributor, Manufacturer
ISO 9001:2008
ISO 9001:2000 certified manufacturer & distributor of waste & wastewater treatment & disposal equipment. Products include ORP & pH controllers, meters & recording equipment, clarifiers, chromium reduction & cyanide destruction equipment, filter presses, flocculent feeders, fume scrubbers, neutralizers, packaged waste treatment systems, reverse osmosis & sludge handling equipment, settling tanks & sludge dryers.
Brand Names: Stutz
www.stutzcompany.com/metal-finishing.html#w...

Weir Minerals - Madison, WI
Manufacturer
ISO 14001:2004, ISO 9001:2000, ISO 9001:2008, Lean Manufacturing, OHSAS 18001:2007
Manufacturer of wastewater treatment equipment, systems & supplies. Products include crankshaft driven, piston, horizontal, slurry, hose, diaphragm, nuclear, self priming diesel, submersible, vertical & turbine pumps, hydrocyclones & knife gate valves.
Brand Names: Cavex, Floway, GEHO, Hazleton, Isogate, Multiflo, Warman
www.weirminerals.com/products__services/val...

Moyno, Inc. - Springfield, OH
Manufacturer
ISO 9001:2008
Manufacturer of progressing cavity wastewater treatment equipment that effectively handle slurry, slush & sludge, including municipal sludge from 15% to over 50% solids. Pumps offer a performance range to 2,500 GPM with pressure to 2,100 PSI. Pumps are used throughout the wastewater treatment process from raw influent wastewater, through secondary sedimentation & into the final sedimentation process.
www.moyno.com/applications/water-wastewater...

Aquatech International Corp. - Canonsburg, PA
Distributor, Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2008, Woman Owned
Manufacturer of integrated, wastewater recovery systems with single point responsibility for treatment of waste streams for recycle/reuse plants.
Brand Names: Watertrak
www.aquatech.com/Technology/WaterRecycleand...

Grindex Pumps - Tinley Park, IL
Manufacturer, Service Company
ISO 14001:2004, ISO 9001, ISO 9001:2008
ISO 9001:2000 & ISO 14001:2004 certified. Manufacturer of waste & wastewater treatment handling equipment including electric submersible pumps. Types of pumps include drainage, sludge, slurry, corrosive fluid, confined space, MSHA approved & corrosive pumps. Features include motor protection system & air valve designed to facilitate dry running. Pumps are suitable for process, construction, mining & heavy industries.
Brand Names: Bravo, Inox
www.grindexpumps.com/product_overview

Refractron Technologies Corp. - Newark, NY
Manufacturer, Custom Manufacturer
ISO 9001:2008
ISO 9001:2008 certified custom manufacturer of wastewater treatment equipment including ceramic membrane filters for filtration media applications. Ceramic filter membranes can withstand low pressure drops & mechanical loading, are corrosion & abrasion resistant, resist temperature up to 800 degrees C & are cleanable, reusable & environmentally safe. Ceramic membrane layers can be applied internally or externally to tubes, & on either surface of plates & discs. Ceramic membranes do not exhibit any media migration or unloading.
www.refractron.com/porous-ceramics/filtrati...